Version 9.6
 —  EntireX Broker ACI Programming  —

Writing Applications: Units of Work

This document describes the concept of units-of-work programming for EntireX Broker. Units of work are the precondition for achieving persistent messaging within your applications. Units of work can also be used without persistence.

This document assumes you are familiar with basic Broker ACI programming. If you are not familiar with it, we recommend beginning with the document Writing Applications: Client and Server.

This document covers the following topics:


What is a Unit of Work?

A unit of work (UOW) is a group of related messages transmitted and received as a single entity. This is achieved through the sender committing as a single unit all the messages being sent and the receiver acknowledging receipt, as a single unit, of all the messages being received. Units of work are used in conjunction with conversations where a UOW exists strictly within one conversation. There can be more than one unit of work within a conversation. Where this is the case, subsequent UOWs can be created by either the client or the server. Since the conversation is always initiated by a client, the first UOW in the conversation is always created by the client. The UOW creator must commit the UOW to be created before being allowed to create another UOW within the same conversation.

Messages belonging to a UOW are always sent with OPTION=SYNC, or OPTION=COMMIT, which performs an implicit COMMIT at the same time as the SEND. Messages belonging to a UOW are always sent asynchronously, i.e. SEND,WAIT=NO. Messages belonging to a UOW are always received with OPTION=SYNC and can be received either with WAIT=NO or by specifying WAIT=[YES | timevalue], depending on application requirements.

Top of page

Control Block Fields and Verbs

Basic Functionality of Broker API

This section describes the expanded functionality of the Broker API used when programming units of work (UOWs) with or without persistence.

ACI Syntax

Function Fields in EntireX Broker Control Block
DEREGISTER
API = 1 or higher
, BROKER-ID = broker_id 
, USER-ID = user_id 
[,TOKEN = token ] 
, SERVER-CLASS = class_name | *
, SERVER-NAME = server_name | *
, SERVICE = service_name    | *
[,OPTION = QUIESCE | IMMED]
RECEIVE
API = 3 or higher for UOW
, BROKER-ID = broker_id 
, USER-ID = user_id 
[,TOKEN = token ] 
, OPTION = SYNC 
, WAIT = n | YES | NO 
, CONV-ID = conv_id | NEW | OLD | ANY
, SERVER-CLASS = class_name | *
, SERVER-NAME = server_name | *
, SERVICE = service_name    | *
[,USTATUS = user_status ]
[,UOWID = uowid ]
REGISTER
API = 1 or higher 
, BROKER-ID = broker_id 
, USER-ID = user_id 
[,TOKEN = token ]
, SERVER-CLASS = class_name,
, SERVER-NAME = server_name,
, SERVICE = service_name
SEND
API = 3 or higher for UOW
, BROKER-ID = broker_id 
, USER-ID = user_id 
[,TOKEN = token ] 
, OPTION = COMMIT | SYNC 
, WAIT = NO 
, CONV-ID = conv_id | NEW 
, SERVER-CLASS = class_name,
, SERVER-NAME = server_name,
, SERVICE = service_name
[,USTATUS = user_status ]
[,STORE = BROKER | OFF ]
[,UWTIME = uow_life_time]
[,UWSTATUS-PERSIST = uow_status_persist_multiplier
| UWSTAT-LIFETIME = uow_status_persist_lifetime ]
[,UOWID = uowid ]
SYNCPOINT
API = 3 or higher for UOW
, BROKER-ID = broker_id 
, USER-ID = user_id 
[,TOKEN = token ] 
, OPTION = BACKOUT    | 
           CANCEL     | 
           COMMIT     | 
           DELETE     |
           EOCCANCEL  |
           LAST       | 
           QUERY      | 
           SETUSTATUS  
[,CONV-ID = conv_id ] 
[,UOWID = uowid ] 
[,USTATUS = user_status ]

Key ACI Field Names

ACI Field Name Explanation
SERVER-CLASS A client uses these fields to identify the service that it requires. A server uses this to offer a service.
CONV-ID Identifier to obtain and specify the conversation. Also used to determine communication mode (non-conversational or conversational).
FUNCTION Function code for one of the verbs; see Key Verbs for FUNCTION Field.
OPTION Indication of specific Broker behavior, depending on the function.
UOWID Identifier generated by the Broker that identifies to the caller the unit of work ID. Specify valid UOWID to indicate an existing unit of work or leave blank when starting to SEND or RECEIVE a new unit of work. It is optionally specified when examining the status of a unit of work already created by the participant.
WAIT Time value to specify blocking or non-blocking of the conversation. See Blocked and Non-blocked Broker Calls for client and server | publish and subscribe.

Key Verbs for FUNCTION Field

Verb Description
REGISTER Inform the broker that a service is available.
RECEIVE Retrieve request from partner.
SEND Send reply to the partner.
DEREGISTER Remove the availability of the service.

Top of page

Client/Server Programming for Units of Work

The figure below illustrates the logical program flow of a simple two-message client request UOW and a one-message server reply UOW. See also Broker UOW Status Transition.

  1. The server logs on, registers, and issues a RECEIVE operation, and waits for a new CID and a UOW (unit of work).

  2. The client logs on, creates a new UOW and a new conversation ID. It sends a message as part of a UOW and then commits the UOW, allowing the Broker to deliver it.

  3. The server receives the first message in the UOW. Then the next (last) message. The server then creates a new UOW for the reply. The new UOW is part of the existing conversation (CID=123). The server commits both UOWs, i.e., the incoming UOW is processed and the outgoing UOW is ACCEPTED.

  4. The client receives the incoming message and commits the UOW. The UOW is now PROCESSED.

Client Server
 
LOGON,UID=,TOKEN= 
>OK 
REGISTER 
>OK 
RECEIVE,CID=NEW,OPT=SYNC,WAIT=1M
  This receive operation will be satisfied by a new CID and a UOW. Non-UOW messages will not satisfy.
(waits)
LOGON,UID=,TOKEN= 
>OK 
SEND,OPT=SYNC,CID=NEW,WAIT=NO
 
Creates a new UOW and a new CID.  
>OK,CID=123,UOWSTATUS=RECEIVED, 
UOWID=987 
SEND,OPT=SYNC,CID=123,WAIT=NO
 
Adds another message to the open UOW  
>OK,CID=123,UOWSTATUS=RECEIVED, 
UOWID=987 
SYNCPOINT,OPT=COMMIT,CID=123
 
Commits the open UOW, allowing the broker to deliver it.  
>OK,CID=123,UOWSTATUS=ACCEPTED, 
UOWID=987
>OK,CID=123,UOWSTATUS=FIRST,UOWID=987
UOW (UOWID=987) is now safely in the hands of the broker. The initial receive operation is completed, indicating a CID, a UOWID, and the FIRST message of a UOW.
RECEIVE,CID=123,OPT=SYNC,WAIT=1M
RECEIVE ,CID=123,OPT=SYNC
This will be satisfied by a UOW on CID=123. Request the next message in open UOW.
(waits)
>OK,CID=123,UOWSTATUS=LAST,UOWID=987
  Receive the next message, which is the last. The server now has all the data.
 
SEND,OPT=SYNC,CID=123,WAIT=NO
  Create a new UOW for the reply, on CID=123.
 
>OK,CID=123,UOWSTATUS=RECEIVED,UOWID=456
  There are now actually 2 open UOWs (987 and 456), one in each direction.
 
SYNCPOINT,OPT=COMMIT,CID=123, 
UOWID=
  This commits both UOWs, the incoming one (987) is now PROCESSED and the outgoing one (456) is ACCEPTED.
>OK,CID=123,UOWSTATUS=ONLY,UOWID=456
>OK,CID=123,UOWSTATUS=ACCEPTED, 
UOWID=456
Receive a message, the only one, in a UOW on CID=123. This is a different UOW than was sent.  
SYNCPOINT,OPTION=COMMIT,CID=123
(Loops back and reissues original receive)
This commits the UOW; it is now PROCESSED  
>OK,CID=123,UOWSTATUS=PROCESSED, 
UOWID=456 
LOGOFF 
>OK
 

Top of page

Client/Server Programming for a Persistent Unit of Work

The figure below illustrates the logical program flow of a simple one-message persistent UOW with deferred delivery to a server, with no reply. The client queries the status of the UOW to determine its completion. See also Broker UOW Status Transition.

  1. The client logs on and creates a new persistent UOW and a new conversation. The intended server is not currently available.

  2. The client commits the open UOW, allowing the Broker to deliver it. The UOW (UOWID=987) is now stored by the Broker. It will be delivered whenever the server is available and will be retained even in case of system failure (that is, the UOW is persistent).

  3. The client logs off.

  4. The server logs on and registers. It receives the new conversation ID and the new UOW. The UOW is committed. Its status is now PROCESSED.

  5. The client logs on using a user ID and token to identify itself as the client that originated the UOW. It then queries the status of its UOW. The status PROCESSED is returned, so the client knows that its UOW has been successfully delivered and processed by the server.

Client Server
LOGON, UID=,TOKEN= 
>OK 
SEND,OPT=SYNC,CID=NEW,WAIT=NO, 
STORE=BROKER, 
UWTIME=5M,UWSTATP=5
 
Creates a new persistent UOW and a new CID. The UOW will have a lifetime of 5 minutes; the duration of the status is 5 times this value (25 minutes). The intended server is not up at this time.  
>OK,CID=123,UOWSTATUS=RECEIVED,UOWID=987 
SYNCPOINT,OPT=COMMIT,CID=123
 
Commit the open UOW, allowing the broker to deliver it.  
>OK,CID=123,UOWSTATUS=ACCEPTED,UOWID=987
 
UOW (UOWID=987) is now safely in the hands of the broker. The UOW will be delivered whenever the server comes up, even if the system should fail.  
LOGOFF  
The client can now terminate, knowing that the UOW will be delivered.  
  Some time later, the server comes up.
 
LOGON,UID=,TOKEN= 
>OK 
REGISTER, 
>OK 
RECEIVE,CID=NEW,OPT=SYNC
  This receive operation will be satisfied by a new CID and a UOW. Non-UOW messages will not satisfy.
 
>OK,CID=123,UOWSTATUS=ONLY,UOWID=987
  The receive completes, indicating a CID and the ONLY message of a UOW.
 
SYNCPOINT,OPT=COMMIT,CID=123, 
UOWID=987
  This commits the UOW; its status is now
PROCESSED.
 
>OK,CID=123,UOWSTATUS=PROCESSED, 
UOWID=987
  (Loop back and reissue original receive, if desired, or terminate)
Some time later, the client can come back and check the status of its UOW.  
LOGON, UID=, TOKEN=
 
Specifying the same UID/TOKEN ensures that this client can be identified as the original client.  
>OK
 
SYNCPOINT,OPTION=LAST
 
Request the status of the last UOW this user created.
The request must be made within 30 minutes, based on the value of the original SEND.
 
>OK,UOWID=987,CID=123,UOWSTATUS=PROCESSED
 
The client now knows that its UOW was successfully processed by the server.  
LOGOFF 
>OK
 

Top of page

Client/Server Restart after System Failure

Warning:
USER and TOKEN must be specified when using persistent units of work (UOWs) to persist either a message or the status of a message exchanged between partner application components, where this information is held in the persistent store.

EntireX Broker provides a reconnection feature, using the TOKEN field in the ACI. If the application supplies a token along with USER-ID, the processing is automatically transferred when a request with the same user ID and token is received, either from the same process or from a different process or thread.

You need to specify USER and TOKEN to reconnect with the correct user context after a broker has been stopped and restarted when using units of work.

Top of page