Version 9.5 SP1
 —  EntireX DCOM Wrapper  —

Data Type Binary with the EntireX DCOM Wrapper

Note:
Mapping and handling of data type binary (IDL file format B) changed in version 5.2.1.6 of the DCOM Wrapper. To avoid conversions of any binary data, the mapping of data type binary was changed from automation type BSTR to automation type unsigned char.

This document covers the following topics:


Mapping Data Type Binary

Version 5.3.1 and above

Software AG IDL   Visual Basic C++ Note
B1   Byte unsigned char  
B n 1 GB >= n > 1 Byte() SAFEARRAY(unsigned char) 1
B n /i1,i2,i3 1 GB >= n >= 1 Byte() SAFEARRAY(unsigned char) 1, 2
BV1   Byte unsigned char  
BV n 1 GB >= n > 1 Byte() SAFEARRAY(unsigned char) 1
BV n /i1,i2,i3 1 GB >= n >= 1 Byte() SAFEARRAY(unsigned char) 1,2
BV Variable size <=1 GB Byte() SAFEARRAY(unsigned char) 1
BV/i1,i2,i3 Variable size <=1 GB Byte() SAFEARRAY(unsigned char) 1

Notes

  1. The maximum length you can specify depends on your hardware configuration and your software environment apart from EntireX. There is, however, an absolute limit (1 GB) that cannot be exceeded.

  2. Depending on n, the SAFEARRAY has 3 dimensions (n = 1) or 4 dimensions ( n > 1).

Top of page

Index Order

The n (n > 1) length value is used as the rightmost index, for n = 1 the index n is dropped.

Example:

Bn / i1,i2,i3       -->  i1,i2,i3,n
B1 / i1,i2,i3       -->  i1,i2,i3

Note:
If the IDL file contains data of type binary, the code generated by the EntireX DCOM Wrapper 5.2.1.6 is not compatible to the code generated by older versions of the EntireX DCOM Wrapper. If the IDL file does not contain data of type binary, the codes are compatible.

Top of page

Example

    Library 'Bintest' Is
    Program 'bintest1':'binary1' Is
     Define Data Parameter
      1  LittleBin  (B1)
      1  MaxBin (B126)
      1  BigBin (B16/20)
      1  VeryBigBin (B10/3,4,5)
     End-Define

    Program 'bintest2':'binary2' Is
     Define Data Parameter
      1  Group
      2    BigBin    (B126/20)
      1  PerGroup    (/2,3)
      2    AnotherBin (B30/10)
     End-Define

Visual Basic

    Dim obj As Object

    ...

    Set obj = CreateObject("Eol.BinTest")

    ...

    ' Init parameter of program "binary1"
    Dim vbLittleBin As Byte
    Dim vbMaxBin()  As Byte
    Dim vbBigBen()  As Byte
    Dim vbVeryBigBin() As Byte

    ' Parameter of program "binary2"
    ' --

    ' others
    Dim checksum As Long


    ' redim Parameter of program "binary1"
    ReDim vbMaxBin(1 To 126)
    ReDim vbBigBin(1 To 20, 1 To 16)
    ReDim vbVeryBigBin(1 To 3, 1 To 4, 1 To 5, 1 To 10)


    '''' binary1 ''''
    ' Fill in binary data
    vbLittleBin = &H0


    For i1 = 1 To 126
        vbMaxBin(i1) = i1
    Next i1

    For i1 = 1 To 20
        For i2 = 1 To 16
             vbBigBin(i1, i2) = 130 + i2 + i1
        Next i2
    Next i1

    For i1 = 1 To 3
        For i2 = 1 To 4
            For i3 = 1 To 5
                For i4 = 1 To 10
                   vbVeryBigBin(i1, i2, i3, i4) = 130 + i2 + i1
                Next i4
            Next i3
        Next i2
    Next i1

    obj.binary1 vbLittleBin, vbMaxBin, vbBigBin, vbVeryBigBin

    ' Reading of binary data
    ' here for example:
    ' takes all binary data values and add them to variable checksum
    checksum = 0

    For i1 = 1 To 3
        For i2 = 1 To 4
            For i3 = 1 To 5
                For i4 = 1 To 10
                   checksum = checksum + vbVeryBigBin(i1, i2, i3, i4)
                Next i4
            Next i3
        Next i2
    Next i1

    ...

    '''' binary2 ''''
    Dim barray20_126() As Byte
    Dim barray10_30() As Byte

    ReDim barray20_126(19, 125)
    ReDim barray10_30(9, 29)

    For i1 = 0 To 19
       For i2 = 0 To 125
          ' fill in some values
          barray20_126(i1, i2) = i1 + i2
       Next i2
    Next i1

    obj.binary2_group.bigbin = barray20_126  '(B126/20)


    For i1 = 0 To 1
       For i2 = 0 To 2

          For i3 = 0 To 9
             For i4 = 0 To 29
        ' fill in some values
                barray10_30(i3, i4) = 255 - i1 - i2
             Next i4
          Next i3

          obj.binary2_pergroup(i1, i2).anotherbin = barray10_30 ' (B30/10)
       Next i2
    Next i1

    obj.binary2 obj.binary2_group, obj.binary2_pergroup_all

    ' Reading of binary data
    ' here for example:
    ' takes all binary data values and add them to variable checksum

    barray20_126 = obj.binary2_group.bigbin   '(B126/20)

    checksum = 0
    For i1 = 0 To 19
       For i2 = 0 To 125
          checksum = checksum + barray20_126(i1, i2)
       Next i2
    Next i1

    For i1 = 0 To 1
       For i2 = 0 To 2
          barray10_30 = obj.binary2_pergroup(i1, i2).anotherbin

          For i3 = 0 To 9
             For i4 = 0 To 29
                checksum = checksum + barray10_30(i3, i4)
             Next i4
          Next i3

       Next i2
    Next i1

Top of page