Command Central Messages

CCEADME0000 Unknown node alias.
Explanation

A node with the specified alias is not found.

Action

Provide a valid node alias.


CCEADME0001 Password decryption failed. The provided value for shared secret is incorrect.
Explanation

Decrypting the configuration password failed because the specified shared secret is incorrect.

Action

Check if the same shared secret is set on Command Central and Platform Manager.


CCECAME0000 The specified flatfile location does not exist.
Explanation

The flatfile repository was not located at the specified location on the file system.

Action

Specify a valid location for the flatfile repository.


CCECAME0001 A repository already exists at the same location.
Explanation

Two or more repositories cannot point to the same location.

Action

Specify a unique location for the new repository.


CCECAME0002 A repository with this name already exists.
Explanation

The name of the repository is not unique.

Action

Check the repository name and provide a unique name for the repository.


CCECAME0003 Repository name, type and location cannot be empty or missing.
Explanation

The name, type, and location are required parameters when creating asset type repositories.

Action

Specify values for all required parameters.


CCECAME0004 Name and type cannot be empty or missing.
Explanation

All parameters are required.

Action

Specify values for all parameters.


CCECAME0005 Update failed.Trying to update {0} asset repository when the cached repository is of type {1}.
Explanation

The specified asset repository type is incorrect.

Action

Specify the correct repository type.


CCECCBE0000 File with path {} can not be deleted.
Explanation

The file can not be deleted.

Action

Make sure the file is not used by any process.


CCECCUE0868 No mirror repositories were discovered at this URL. Please enter a valid mirror repository URL.

CCECCUI0143 No ports configured for the specified runtime.
Explanation

There are no ports configured for the specified runtime.

Action

Configure a port.


CCECCUI0288 No rows were selected. You are about to download all Log Sources.
Explanation

No rows were selected in the Log Sources table before clicking the Download Selected Files menu option.

Action

No action required.


CCECCUI0869 The selected file does not contain any properties for the current layer.

CCECCUI0870 The following properties will be set from the imported file:

CCECCUI0871 The following properties are not present in the imported file and will retain the current values:

CCECCUI0872 Register layer types

CCECCUI0873 Import default templates

CCECCUI0874 Connect to the default templates repository. Select whether to import templates from the default templates on GitHub {0} or from a local templates ZIP file. Command Central will create layer type definitions for the templates used in the sag-cc-layer-defs template. If a template that is already imported in Command Central has the same alias as a template in the repository from which you import templates, Command Central will overwrite the template.

CCECCUI0875 Local templates ZIP file

CCECCUI0876 Type a template alias and select or clear the checkbox(es) to specify which instance details you want to export to the template. Command Central imports the run-time micro template for the instance into the local Command Central installation, and creates a layer type definition for the template.

CCECCUI0877 Alias

CCECCUI0878 Include Products

CCECCUI0879 Include Instance

CCECCUI0880 Include Fixes

CCECCUI0881 Include Configurations

CCECCUI0882 Include Database

CCECCUI0883 Specify encryption password

CCECCUI0884 All instance and configuration passwords in the template will be protected using the password you enter here.

CCECCUI0885 Repeat password

CCECCUI0886 Select Instance Data

CCECCUI0887 Passwords do not match

CCECCUI0888 The template alias cannot be empty or contain spaces. Valid characters are a-z, A-Z, 0-9, ''_'', ''.'' and ''-''.

CCECCUI0889 The product instance is of release version that does not support including only the products hosted on the instance. All products installed on the node will get included in the exported template.

CCECCUI0890 The product instance is of release version that does not support including only the fixes installed on the node. The template will get exported with the "fixes: ALL" parameter.

CCECCUI0891 The product instance is of release version that does not support parameterizing the configurations.

CCECCUI0892 To edit the template, use the following steps:

CCECCUI0893 1. Export the template: sagcc get templates composite export {0} -o {0}.yaml -a application/yaml

CCECCUI0894 2. Edit the content of the {0}.yaml file

CCECCUI0895 3. Import the template: sagcc exec templates composite import -i {0}.yaml

CCECCUI0896 Template generation failed. See the message below for details.

CCECCUI0897 Summary

CCECCUI0898 Export Instance to Template

CCECCUI0899 https://github.com/SoftwareAG/sagdevops-templates-repo
Explanation

This is the URL to the Software AGs default Templates Repository.


CCECCUI0900 The layer is being provisioned. You can follow the create layer job with id {0} .

CCECCUI0901 The template will include the following details about this product instance:

CCECCUI0902 Products

CCECCUI0903 Instance

CCECCUI0904 Fixes

CCECCUI0905 Configurations

CCECCUI0906 Limitations

CCECCUI0907 Command Central will export the {0} instance to a run-time micro template with alias {1}.

CCECCUI0908 After the job is completed, you can {0} using the layer type definition created for this template.

CCECCUI0909 create a layer

CCECCUI0910 Export to Template

CCECCUI0911 Export to template job started successfully.

CCECCUI0912 Template alias

CCECCUI0913 Templates

CCECCUI0914 To register a template in Command Central, select either a single template YAML file or a zip archive of the template YAML and supporting files.

CCECCUI0915 Overwrite template

CCECCUI0916 A template with the same alias already exists. Are you sure you want to overwrite it?

CCECCUI0917 Import template

CCECCUI0918 To modify the template, download it from {0}, edit in a text editor, and re-import.

CCECCUI0919 Return to Templates

CCECCUI0927 Component ID

CCECCUI0929 Can include up to 100 ASCII characters, numbers, underscore (_), dot (.), and a hyphen (-).

CCECCUI0930 Edit Software AG Repositories

CCECCUI0931 Repository location

CCECCUI0932 Asset Repositories

CCECCUI0933 Specify Connection Data

CCECCUI0934 Database URL

CCECCUI0935 JDBC connection URL

CCECCUI0936 Database Name

CCECCUI0937 Examples: sqlserver, oracle, mysql

CCECCUI0938 Database Type

CCECCUI0939 Database Username

CCECCUI0940 Database Password

CCECCUI0941 Database URL is a required field.

CCECCUI0942 Database name is a required field.

CCECCUI0943 Database type is a required field.

CCECCUI0944 Database username is a required field.

CCECCUI0945 Database password is a required field.

CCECCUI0946 You have entered the following connection data:

CCECCUI0947 Command Central will export the database for node {0} to a database micro template with alias {1}.

CCECCUI0948 If any of the configurations use full file paths, you must review the generated template and parameterize the configurations that include full file paths.

CCECCUI0949 Type a template alias and fill in the fields to specify the database connection details. Command Central imports the database micro template into the local Command Central installation, and creates a layer type definition for the template.

CCECCUI0950 Exporting a runtime is only allowed for a runtime component different than Platform Manager.

CCECCUI0951 Export database data for this node to a template.

CCECCUI0952 Exporting a database is only allowed for the OSGI-SPM component on nodes with version 10.5 or later which have Database Component Configurator installed.

CCECCUI0953 Export this instance to a template.

CCECCUI0957 Connect to Software AG Templates Repository

CCECCUI0958 Limitations

CCECCUI0959 No configurations will be exported in this template. If you want configurations to be included, go back and mark the "Include configurations" checkbox.

CCECCUI0960 Select Configuration Types

CCECCUI0961 Specify which configuration types you want to export to the template. Command Central will export all configurations with the selected types for the selected component and all subcomponents.

CCECCUI0962 Search Configuration Types

CCECCUI0963 No configurations selected

CCECCUI0964 Select at least one configuration type to be exported.

CCECCUI0965 No information selected for export

CCECCUI0966 Select at least one item to be exported.

CCECFRE0000 The content of the response is not acceptable according to the accept headers
Explanation

The response content cannot be converted into the requested media type that is specified in the HTTP Accept header. For example, the response is in text format and cannot be converted into XML or JSON format.

Action

Try to load the configuration again and specify a supported media type.


CCECFRE0001 The ConfigurationTypeId "{1}" does not exist for RuntimeComponentId "{0}".
Explanation

One or more configuration types specified do not match or are not valid for the specified properties.

Action

Provide valid configuration types for the specified properties. You can determine the valid configuration types using the following command:cc list configuration types


CCECFRE0002 The ConfigurationTypeId "{0}" does not exist for RuntimeComponentId "{1}".
Explanation

There is no registered ConfigurationType with the provided ID for the specified runtime component.

Action

Provide a valid ConfigurationTypeId for the specified runtime component. You can determine the IDs for configuration typesusing the following command:cc list configuration types


CCECFRE0005 LandscapeConfigurationUiBindingService is not available.
Explanation

The LandscapeConfigurationUiBindingService is not registered.

Action

Ensure that the bundle that contains this service is active.


CCECFRE0006 Configuration instance {0} cannot store license keys.
Explanation

The specified configuration instance {0} cannot store license keys.

Action

Specify a configuration instances that is able to store license keys. Such configuration instances always start with the COMMON-LICENSE prefix.


CCECFRE0007 Getting the content of an input stream as string fails
Explanation

Command Central cannot convert the input stream as string.

Action

Check the logs for more information.


CCECLRE0003 An error occurred while unmarshalling JSON for configuration instance {}.
Explanation

An error occurred while unmarshalling JSON for configuration instance {}.

Action

Review the Command Central and Platform Manager logs for more information.


CCECLTE0001 The expected values expression could not be parsed correctly.
Explanation

The expected values expression could not be parsed correctly.

Action

Check the expected values expression for errors.


CCECLTE0012 A resource was not specified.
Explanation

The REST call failed because a remote resource location was not specified in the REST service.

Action

Specify a valid resource in the REST service, for example, spm/inventory/components.


CCECLTE0013 A URL was not specified.
Explanation

The REST call to the remote host failed because the URL was not specified.

Action

Specify a valid URL, for example, http://localhost:8092.


CCECNFE0000 LandscapeDefinition service is not available.
Explanation

The LandscapeDefinition service is not registered.

Action

Ensure that the bundle that contains this service is active and the service is properly configured.


CCECNFE0001 Landscape inventory service not available.
Explanation

The landscape inventory service was not configured.

Action

Ensure that the bundle that contains this service is active.


CCECNFE0002 Configuration service factory not available.
Explanation

A configuration service factory is not configured.

Action

Ensure that the bundle that contains the configuration service factory is active and that the component definition is correct.


CCECNFE0003 The configuration service encountered a remote request failure.
Explanation

The remote request for a configuration item failed.

Action

Ensure that the node in the request is active.


CCECNFE0004 The remote request encountered a concurrency error.
Explanation

The system could not execute parallel remote requests.

Action

Contact Software AG Global Support.


CCECNFE0005 Can not update credentials.
Explanation

The user credentials on Command Central can not be updated.

Action

Ensure that the runtimeComponentId and nodeAlias parameters are valid.


CCECNFE0006 Can not process JSON configuration.
Explanation

The JSON format of an old configuration is incorrect.

Action

Verify that the configuration uses proper JSON format.


CCECNFE0008 Can not update configurations cache because of failure during retrieval of remote configurations.
Explanation

The remote request for configuration items failed and the configurations cache can not be updated.

Action

Ensure that the node in the request is active.


CCECNFE0009 The configuration service encountered a remote request failure while retrieving configuration data for runtime component {0}, configuration instance {1}.
Explanation

The remote request for the specified configuration item failed.

Action

Ensure that the node in the request is active and check the Platform Manager logs.


CCECOME0000 Cannot perform an operation on nodes that are not accessible. The offline nodes are {0}.
Explanation

The specified nodes cannot be accessed because they are offline.

Action

Check the status of the specified nodes. Command Central can only access nodes that are online.


CCECOME0002 {0} on {1} ({2}) became unresponsive. Component restart may help to resolve this quickly.
Explanation

Specified components became unresponsive.

Action

Component restart may help to resolve this quickly.


CCECOME0003 {0} on {1} ({2}) crashed. You will need to start it again and investigate the cause of the failure.
Explanation

Specified components crashed.

Action

You will need to start it again and investigate the cause of the failure.


CCECOME0007 {0} of {1} on {2} ({3}) spiked into critical zone. The component may become overloaded!
Explanation

The specified component becomes overloaded.

Action

Try to release the load on the specified component.


CCECOME0015 Node {0} was not found.
Explanation

The specified node was not found.

Action

Check if the correct alias is used. If the node is not present in the landscape it can be added using the landscape service. If the node has been added but is still not accessible, contact Software AG Global Support.


CCECOME0016 Node {0} could not be created.
Explanation

A node with alias {0} could not be created because another node with alias {1} already exists.

Action

Provide a different alias for the new node.


CCECOME0017 Environment {0} could not be created.
Explanation

An environment with alias {0} could not be created because another environment with alias {1} already exists.

Action

Provide a different alias for the new environment.


CCECOME0018 Generation of checksum for license metering report failed
Explanation

The generation of the checksum for the license metering report failed.

Action

Contact Software AG Global Support.


CCECOME0019 Generation of report id for license metering report failed
Explanation

The generation of the report ID for the license metering report failed.

Action

Contact Software AG Global Support.


CCECOME0020 Cannot convert XML report to string
Explanation

The convertion of the XML report failed.

Action

Contact Software AG Global Support.


CCECOME0025 Generation of XML string for object instance of class {0} failed
Explanation

The generation of the XML string for object instance of class {0} failed.

Action

Provide a valid object instance.


CCECOME0029 License key {0} not found.
Explanation

The license key with the specified alias {0} is not found.

Action

Upload and assign a valid license key for this alias or use a different existing license key alias.


CCECOME0030 Checksum verification of report {0} failed!
Explanation

The checksum verification of report {0} failed.

Action

Contact Software AG Global Support.


CCECOME0033 Unable to parse this date string({0}).
Explanation

Unable to parse this date string({0}).

Action

Contact Software AG support.


CCECOME0034 Unexpected exception occurred: {0}.
Explanation

An unexpected exception occurred: {0}.

Action

Contact Software AG support.


CCECOME0038 The remote Platform Manager job with id {0} was not found.
Explanation

A job with the specified id was not found on Platform Manager.

Action

Specify an existing job id.


CCECOME0041 The embedded license key {0} cannot be deleted.
Explanation

The license key {0} was implicitly added with license manifest {1} and it cannot be deleted individually.

Action

Delete the license key {0} by deleting the corresponding license manifest {1}.


CCECOME0042 Shared secret is not available.
Explanation

You have not provided a shared secret and Command Central was unable to obtain the default shared secret.

Action

Provide a shared secret.


CCECORE0001 Exceeded the maximum nodes allowed as per the configured license.
Explanation

You have exceeded the nodes allowed to you as per the license configured for Command Central.

Action

Contact Software AG support to upgrade the license.


CCECORE0002 Invalid License found. The system is going to shutdown in 30 minutes.
Explanation

The configured license is invalid. You need to configure a valid license immediately else the system will shutdown in 30 mintures.

Action

Configure a valid license immediately. If you do not have one, contact your system dministrator or Software AG support.


CCECORE0003 Invalid License found. The system is shutting down.
Explanation

The system is shutting down as the configured license is invalid.

Action

Contact your Administrator or Software AG support.


CCECORE0004 The license has expired.
Explanation

The configured license has expired.

Action

Contact your system administrator or Software AG support.


CCECORE0005 The license is not valid for the current operating system.
Explanation

The configured license is not valid for the current operating system.

Action

Contact your Administrator or Software AG support.


CCECORE0006 The number of nodes has exceeded as per the configured license.
Explanation

As per the configured license, you are not allowed to add more nodes as you have exhausted the licensed number of nodes.

Action

Contact your system administrator or Software AG support to get the license upgraded to add more nodes.


CCECORE0007 Falied to get the node count from the license.
Explanation

This issue may occur when your license file is corrupt.

Action

Contact your system administrator or Software AG support.


CCECORE0008 The configured license is not valid for this product.
Explanation

Either the license file is not for Command Central or it may have be a corrupt file.

Action

Contact your system administrator or Software AG support.


CCECORE0009 Failed to read the product code from the license.
Explanation

This issue may occur when your license file is corrupt.

Action

Contact your system administrator or Software AG support.


CCECORE0010 The configured license is not valid for this product version.
Explanation

This issue may occur when your license file is corrupt.

Action

Contact your system administrator or Software AG support.


CCECORE0011 Failed to read the product version from the license.
Explanation

Either the license file is not for current version of Command Central or teh license file may be corrupt.

Action

Contact your system administrator or Software AG support.


CCECORE0012 Node with alias {0} is not found.
Explanation

The specified node is not found in Command Central.

Action

Ensure that the node alias is spelled correctly. You can view a list of installations and their aliases using either the Command Central Web user interface, the cc list landscape nodes command, or the REST API.


CCECORE0013 The specified search query is not valid. The supported search attributes are: {0}
Explanation

One or more attributes are not supported for this type of search.

Action

Ensure that the search attributes are supported for the type of search you want to perform. Make sure that the attributes are spelled correctly. The supported search attributes are listed in the error message. Note that search attributes are case-sensitive.


CCECORE0014 Task "{0}" for node "{1}" failed.
Explanation

The specified task failed to execute for the specified node.

Action

Read through the details provided in the error message and the logs, then take corrective steps.


CCECORE0015 Tasks execution has failed.
Explanation

Some or all of the tasks failed to execute.

Action

Read through the details provided in the error message and the logs, then take corrective steps.


CCECORE0016 The specified attribute name and the attribute name in the request are not the same.
Explanation

The attribute name in the body and the attribute name in the path segment should be the same.

Action

Fix the request and try again.


CCECORE0017 Specify attributes to created or updated.
Explanation

The request does not contain search attributes to be created or updated.

Action

Fix the request and submit it again.


CCECORE0018 {0} did not get {1} for {2} seconds!
Explanation

The specified node did not reach the expected status in the given amount of time.

Action

Retry the operation or contact SoftwareAG Global Support.


CCECORE0019 Key {0} is invalid.
Explanation

The specified key {0} is invalid.

Action

Specify a valid key, followed by a valid contract item identifier (for example, item=<contractItemIdentifier>).


CCECORE0020 Contract item identifier {0} is invalid.
Explanation

The specified contract item identifier {0} is invalid.

Action

Specify a valid contract item identifier (for example, item=<contractItemIdentifier>). You can find the valid contract item identifiers using the following command: cc list license-tools manifests contracts basepeak <nodeAlias> <productId>


CCECORE0021 One contract item identifier expected.
Explanation

Command Central expects one contract item identifier.

Action

Specify one valid contract item identifier.


CCECORE0022 Could not retrieve Version of node {0}.
Explanation

The error usually occurs because of issues connecting to node {0}.

Action

Check the logs for details about the connectivity issues.


CCECORE0023 Cannot add contract item identifier assignment for runtime components with base and peak license key.
Explanation

Command Central cannot add the manual contract item identifier assignment if the runtime component has a base and peak license key.

Action

Specify contract item idenfiers only for runtime components without base and peak license key.


CCECORE0025 {0} did not get {1} for {2} seconds!
Explanation

The specified node did not reach the expected status in the given amount of time.

Action

Retry the operation or contact SoftwareAG Global Support.


CCECORE0026 {0} did not get {1} for {2} seconds!
Explanation

The specified node did not reach the expected status in the given amount of time.

Action

Retry the operation or contact SoftwareAG Global Support.


CCECORE0027 A node with the specified alias does not exist.
Explanation

An installation (node) with the specified alias name does not exist.

Action

Specify a valid alias name for an existing installation (node).


CCECORE0028 A runtime component with the specified id does not exist.
Explanation

A runtime component with the specified ID does not exist on the node(s).

Action

Specify an ID of an existing runtime component.


CCECORE0029 Cache update operation failed.
Explanation

One of the automatic cache update operations failed to complete.

Action

Check the logs for details.


CCECORE0030 Unknown cahce type: {0}. EventListener was not added because the required cache could not be created.
Explanation

Ehcache is not configured properly.

Action

Contact Software AG global support.


CCECORE0031 Unknown cahce type: {0}. EventListener was not removed because the required cache could not be created.
Explanation

Ehcache is not configured properly.

Action

Contact Software AG global support.


CCECORE0032 Invalid settings format: {0}
Explanation

The format of the settings is as follows: key:value[;key:value]...

Action

Make sure that the settings comply with the specified format.


CCECORE0033 Invalid value for period: {0}
Explanation

The value for period must match the following pattern \d+h|m. Examples: 9m, 3h, 45m, 12h

Action

Make sure the period value complies with the specified format.


CCECPTE0000 Invalid composite template alias: {0}
Explanation

The composite template alias is not present or contains special characters.

Action

Specify a composite template alias. The template alias can include the following characters: letters, digits, hyphen and dot.


CCECPTE0001 A composite template with alias {0} already exists.
Explanation

A composite template with the specified alias name already exists.

Action

Change the alias name of the composite template you are importing or delete the existing composite template that has the same alias name.


CCECPTE0002 Missing property {0}.
Explanation

A property is missing from the composite template definition.

Action

Add the missing property with a proper value.


CCECPTE0003 Invalid value {0} for property {1}.
Explanation

A property has an invalid value.

Action

Provide a proper value as described in the Command Central documentation.


CCECPTE0004 A composite template with alias {0} does not exist.
Explanation

A composite template with the specified alias does not exist.

Action

Import a composite template with the specified alias or use the alias of an existing composite template.


CCECPTE0005 The requested repository version {0} was not found.
Explanation

The requested repository version was not found.

Action

Provide an existing repository version or specify an image file location if the repository is of type image.


CCECPTE0006 Invalid repository definition.
Explanation

An invalid combination of properties was specified.

Action

See the Command Central documentation on how to define a repository.


CCECPTE0007 The repository definition cannot have both version and location.
Explanation

In the repository definition, the specified location defines that this is an image repository. However, a version cannot be specified for an image repository.

Action

Fix the repository definition. If it is an image repository, specify only a location. Otherwise, remove the location and specify proper credentials.


CCECPTE0008 Cannot have both credentials and location in repository definition.
Explanation

In the repository definition, location defines that this is an image repository. However, you cannot specify credentials for an image repository.

Action

Fix the repository definition. If the repository is an image repository, specify a location. If the repository is a master repository, remove the location and specify proper credentials.


CCECPTE0015 The runtime status of runtime component {0} on node {1} is not online.
Explanation

The runtime component has a status different than online.

Action

Check the logs on the node for issues which may cause the behavior.


CCECPTE0016 The {0} lifecycle job of a runtime component on node {1} did not complete successfully.
Explanation

The lifecycle job of a runtime component on a node did not complete successfully.

Action

Check the jobs on the node.


CCECPTE0017 Define layers when there is a provisioning section.
Explanation

Provisioning requires layers to be defined.

Action

Define a layers section.


CCECPTE0018 Provisioning requires layer {0} however a layer is not defined.
Explanation

All layers defined in the provisioning section should be defined in the layers section.

Action

Fix the layers section by adding the missing layers or change the provisioning section to not include layers.


CCECPTE0019 Invalid layer alias: {0}
Explanation

The layer alias is not present or contains special characters.

Action

Provide a layer alias. The layer alias can contain the following characters: letters, digits, hyphen and dot.


CCECPTE0020 Invalid template alias: {0}
Explanation

The template alias is not present or contains special characters.

Action

Provide a layer alias. The layer alias can contain the following characters: letters, digits, hyphen and dot.


CCECPTE0021 Repository with name {0} is already defined.
Explanation

A repository with the same name is already defined in the YAML document.

Action

Change the name of the repository, so that the name is unique in the scope of the document.


CCECPTE0022 The maximum number of retries for applying template {0} on node {1} due to possible Platform Manager restarts is reached.
Explanation

The maximum number of retries for applying a template on a node due to possible Platform Manager restarts is reached.

Action

Check the logs for details about previous attempts to apply the template to determine what the issues are.


CCECPTE0023 {0} did not get {1} for {2} seconds!
Explanation

The specified node did not reach the expected status in the given amount of time.

Action

Retry the operation or contact SoftwareAG Global Support.


CCECPTE0024 Can not find any repository matching the provided host and name.
Explanation

Command Central does not find a repository matching the specified host and name.

Action

Specify valid host and name.


CCECPTE0025 Snapshot template {0} not found!
Explanation

The snapshot template referred from the composite template cannot be found.

Action

Import a snapshot template with the specified alias and re-apply the composite template.


CCECPTE0027 Server action {0} failed with a non-zero exit code: {1}
Explanation

An action executing on the CommandCentral server failed.

Action

Make sure the action itself is correct and try again.


CCECPTE0032 The jar command executable cannot be found on the source node installation.
Explanation

The jar command executable cannot be found on the source node installation.

Action

Check the composite template logs.


CCECPTE0038 Remote action {0} failed with a non-zero exit code: {1}
Explanation

An action executing remotely failed.

Action

Make sure the action itself is correct and try again.


CCECPTE0039 Neither script nor file exist for action: {0}!
Explanation

An action must have either a script, or a file associated with it.

Action

Add a script or file and try again.


CCECPTE0040 The runtime status of runtime component {0} on node {1} is not paused.
Explanation

The runtime component has a status other than paused.

Action

Check the logs on the node for issues which may cause the behavior.


CCECPTE0041 Environment {0} is not defined in 'provision'!
Explanation

The environments in the 'provision' and 'migration' sections do not match.

Action

Make sure the same set of environments is present in both the 'provision' and 'migration' sections and try again.


CCECPTE0042 Layer {0} referenced in 'migration' but not in 'provision'!
Explanation

The layers referenced in the 'provision' and 'migration' sections do not match.

Action

Make sure the same set of layers are referenced from both the 'provision' and 'migration' sections and try again.


CCECPTE0043 The number of nodes for layer {0} in 'migration' and 'provision' don't match!
Explanation

The number of nodes for a given layer in the 'migration' section must match the number of nodes for the same layer in the 'provision' section.

Action

Make sure the number of nodes per layer is the same across the 'migration' and 'provision' sections and try again.


CCECPTE0044 Executing more than one migration type in a single composite template is not supported: {0}, {1}. Check the source and target nodes hostnames and installation directories.
Explanation

The composite template contains nodes that should be migrated using different migration type scenarios. This is not supported.

Action

Split or parameterize the template so that the migration is done using a single migration type.


CCECPTE0045 Error during archiving the migration source node installation directory.
Explanation

An error occurred during archiving the migration source node installation directory.

Action

Check the logs for the result of the executed remote archive command.


CCECPTE0046 Runtime component with id {0} cannot be found.
Explanation

Runtime component with the provided ID cannot be found.

Action

Check the Command Central logs for inventory service errors.


CCECPTE0047 Cannot find node with alias {0} in the list of the bootstrapped migration source nodes: {1}.
Explanation

Command Central cannot find the source node with the specified nodeAlias in the list of bootstrapped migration source nodes.

Action

Check the logs for previous errors.


CCECPTE0048 Aborted because of a migration failure, see the logs for more details.
Explanation

The entire composite template operation failed because of a migration error.

Action

Check the logs to identify the issue and try again.


CCECPTE0049 Cannot skip run-time components stop operation when doing migration on the same host.
Explanation

Skipping the run-time components stop operation when doing migration on the same host is not supported.

Action

To stop the run-time components, enable the migration/options/shutdown option in the composite template definition.


CCECPTE0050 A {0} file could not be found in the imported composite template archive {1}.
Explanation

The expected template yaml file could not be found in the imported composite template archive.

Action

Provide a valid template archive containing the expected template yaml file.


CCECPTE0051 Source backup archive {0} was not found on the Command Central host.
Explanation

The backup archive, created from the migration source node, was not found on the Command Central host.

Action

Check the logs for previous errors related to the backup archive creation or archive transfer from the source host to the Command Central host.


CCECPTE0052 Source backup archive {0} was not found on host {1}.
Explanation

The backup archive, created from the migration source node, was not found on the target host.

Action

Check the logs for previous errors related to backup archive transfer from the Command Central host to the target host. If the backup was transfered manually then check if its location is the expected by Command Central one.


CCECPTE0053 Cygpath command returned empty result.
Explanation

The Cygpath command returned empty result.

Action

Check the Command Central template logs.


CCECPTE0054 Cannot skip run-time components stop operation for node {0} running on Windows when doing migration of type different hosts.
Explanation

Skipping the run-time components stop operation when doing migration on different hosts running on Windows is not supported.

Action

To stop the run-time components, enable the migration/options/shutdown option in the composite template definition.


CCECPTE0055 Unexpected YAML type {0} in field {1}! The correct type is integer.
Explanation

Non-integer data was used in a field that requires integer.

Action

Use the correct integer value and try again.


CCECPTE0078 Composite template validation for {0} completed: {1}
Explanation

The validation has detected that the composite template cannot be applied successfully.

Action

Read the validation report, fix the errors, and try again.


CCECPTE0079 The repository definition should not be empty.
Explanation

A repository definition without properties is provided.

Action

Read the Command Central help on how to define a repository and provide the required properties.


CCECPTE0081 Concrete node mapping or variable expected on {0}!
Explanation

An unexpected value was specified.

Action

Use a concrete node mapping or variable and try again.


CCECPTE0083 Support patches are not allowed in the "fixes" section: {0}
Explanation

From DSL version 1.1 and above, support patches are not allowed in the "fixes" section.

Action

Move all patches to the "patches" section.


CCECPTE0084 Node with alias {0} should be present in the landscape when alias mapping policy is EXISTING.
Explanation

The nodes should be already registered in the landscape when alias mapping policy is "EXISTING."

Action

Add the node in the Command Central landscape.


CCECPTE0085 Unknown node identifier type {0}
Explanation

Command Central cannot identify the provided node identifier type.

Action

Provide a valid node identifier type.


CCECPTE0086 The node host {0} is not part of the infrastructure layer.
Explanation

The provided node host is not part of the infrastructure layer.

Action

Add the node host to the list of infrastructure layer hosts.


CCECPTE0087 Illegal node index value {0}.
Explanation

The provided node index value is not valid.

Action

Provide a value between 1 and number of nodes in the infrastructure layer.


CCECPTE0088 Illegal node index {0} in the node alias {1}.
Explanation

The provided node index value in the node alias is not valid.

Action

Provide an index value between 1 and the number of nodes in the infrastructure layer.


CCECPTE0089 {0} policy cannot be used without having infrastructure layer defined.
Explanation

The provided policy cannot be used without having an infrastructure layer defined.

Action

Provide an infrastructure layer.


CCECPTE0090 Node with index {0} requested while the infrastructure layer has {1} nodes.
Explanation

Invalid node index is requested.

Action

Provide a node index that corresponds to the layer nodes count.


CCECPTE0091 DSL version 1.0 is not compatible with alias mapping policy: {0}. Allowed alias mapping policy: {1}.
Explanation

DSL version 1.0 is not compatible with the provided alias mapping policy.

Action

Provide a compatible alias mapping policy, or use a DSL version above 1.0.


CCECPTE0092 The "patches" section cannot be used in DSL version 1.0.
Explanation

The "patches" section can be used in DSL version 1.1 and above.

Action

Either specify the patches in the fixes section, or change the DSL version to 1.1 or above.


CCECPTE0094 Command Central was not able to retrieve the installation directory of the node with alias {0}.
Explanation

Command Central was not able to retrieve the installation directory of a node.

Action

Check if the specified node is online and try again.


CCECPTE0095 The "options" section cannot be used in DSL versions 1.0 and 1.1
Explanation

The "options" section can be used in DSL version 1.2 and above.

Action

Change the DSL version to 1.2 or above.


CCECPTE0097 The node with alias {0} was not found in the landscape.
Explanation

The provided node was not found in the landscape

Action

Provide a valid node alias.


CCECPTE0098 Generating composite templates for products is supported for nodes with version 10.4 or higher.
Explanation

Generating composite templates for products is supported for nodes with version 10.4 or higher.

Action

Provide a node with version 10.4 or higher


CCECPTE0100 Unresolved parameter {0} in composite template.
Explanation

No value is provided for a parameter in the composite template.

Action

Provide a value for the parameter.


CCECPTE0104 Importing composite templates from repository {0} failed.
Explanation

Importing composite templates from repository {0} failed.


CCECPTE0105 Import failed for some composite templates from repository {0}
Explanation

Import failed for some composite templates from repository {0}


CCECPTE0106 Unexpected YAML type in field {0}! The correct type is string.
Explanation

A non-string value was used in a field that requires a string value.

Action

Use a string value in the specified field and try again.


CCECPTE0107 Unexpected YAML type in field {0}! The correct types are string and boolean.
Explanation

A non-integer value was used in a field that requires a string or boolean value.

Action

Use a string or boolean value in the specified field and try again.


CCECPTE0108 Invalid uimetadata properties definition.
Explanation

An invalid structure was specified for uimetadata.

Action

Check the documentation on how to define uimetadata properties using Command Central.


CCECPTE0110 The required database product {0} is not installed on node {1}.
Explanation

The Database Component Configurator should be installed on the target node.

Action

Provide a node on which the Database Component Configurator is installed.


CCECPTE0111 Generating database composite templates is supported for nodes with version 10.5 or higher.
Explanation

Generating database composite templates is supported for nodes with version 10.5 or higher.

Action

Provide a node with version 10.5 or higher.


CCECPTI0026 The following runtime components are started but not ready to accept client requests: {0}
Explanation

Some runtime components have started, but are not ready to accept client requests.

Action

The components might require additional configuration.


CCECPTI0080

CCECPTI0101 Importing composite templates from asset repository {0}
Explanation

Importing composite templates from asset repository {0}


CCECPTI0102 Finished importing composite templates from {0}
Explanation

Finished importing composite templates from {0}


CCECPTI0103 Successfully imported composite template {0}
Explanation

Successfully imported composite template {0}


CCECPTI0109 Installing fixes on target machines: {0} ...

CCECPTW0030 Source migration step {0} finished with error: {1}
Explanation

The source node migration step finished with an error.

Action

Check the logs and identify the error root cause.


CCECPTW0031 Skipping source node archive step. Source node installation directory is null.
Explanation

Command Central will skip the source node archive step, because the source node installation directory is null.

Action

Start Platform Manager on the source node, retrieve the node information on Command Central when Platform Manager gets online.


CCEIMPE0004 You cannot update the license location for the configuration type COMMON-LICLOC in Command Central.
Explanation

You cannot update the license location for the configuration type COMMON-LICLOC in Command Central.

Action

Use the default license location.


CCEIMPE0005 You cannot create a license location for the configuration type COMMON-LICLOC in Command Central.
Explanation

You cannot create a license location for the configuration type COMMON-LICLOC in Command Central.

Action

Use the default license location.


CCEIMPE0006 You cannot delete the license location for the configuration type COMMON-LICLOC in Command Central.
Explanation

You cannot delete the license location for the configuration type COMMON-LICLOC in Command Central.

Action

Use the default license location.


CCEIMPE0007 The product version is invalid.
Explanation

In Command Central, when the license is created or updated for Command Central Engine, if the product version in license validation does not match the version of the product installed, this error is thrown.

Action

Provide a new license file with the product version matching the installed product.


CCEIMPE0009 The product code is invalid.
Explanation

In Command Central, when the license is created or updated for the Command Central Engine, if the product code does not match the Command Central Engine product code, this error is thrown.

Action

Provide a new license file with the product code matching with the Command Central Engine product code.


CCEIMPE0021 A layer definition with the same name already exists.
Explanation

A layer definition with the same name already exists.

Action

Specify a unique name for the layer type.


CCEIMPE0022 A micro template with alias {0} does not exist.
Explanation

A micro template with the specified alias does not exist.

Action

Specify the alias of an existing micro template.


CCEIMPE0023 The provided configuration cannot be null.
Explanation

The provided configuration cannot be null.

Action

Provide non-null layer definition configuration.


CCEIMPE0024 Configuration of type CCE-LAYER-TYPES should have a name attribue with a valid id.
Explanation

The name attribute of the specified configuration type should have an ID that contains only URL friendly symbols.

Action

Provide a URL-friendly ID for the name attribute.


CCEIMPE0025 Providing micro template alias is required.
Explanation

Specifying the micro template alias is required.

Action

Specify the alias of an existing micro template.


CCEIMPE0026 Deleting default system layer definition {0} is not allowed.
Explanation

Deleting default system layer definition is not allowed.

Action

Do not delete the default system layer definitions.


CCEIMPE0027 The selected composite template is not a valid infrastructure micro template.
Explanation

Infrastructure micro templates should define a `nodes` section, a single layer for provisioning, and a single template for provisioning.

Action

Select a valid infrastructure micro template.


CCEIMPE0028 The selected composite template is not a valid runtime micro template.
Explanation

Runtime micro templates should not define a `nodes` section. They should define a single layer for provisioning and a single template for provisioning.

Action

Select a valid runtime micro template.


CCEIMPE0029 The selected composite template is not a valid database micro template.
Explanation

Database micro templates should not define a nodes section. They should define a single layer for provisioning and a single template for provisioning.

Action

Select a valid database micro template.


CCEIMPE0030 Infrastructure Micro Templates must define a single infrastructure layer.

CCEIMPE0031 Runtime Micro Templates must not define a nodes section.

CCEINME0000 Fix repository with Id {0} cannot be found.
Explanation

The specified repository ID is not the ID of an existing repository.

Action

Check the input parameters and specify the ID of an existing repository.


CCEINME0001 An error occurred while registering repository {0} on node {1}. Check the server logs for details.
Explanation

The issue might occur because of a problem with the repository contents.

Action

Check the server logs for details.


CCEINRE0001 A node with the specified alias does not exist.
Explanation

An installation (node) with the specified alias name does not exist.

Action

Specify the valid alias name for an existing installation (node).


CCEINRE0002 The specified runtime component is not a process!
Explanation

The specified run-time component is not a PROCESS. Run-time components that are in the PROCESS category are components that function on their own. In contrast, run-time components that are in the ENGINE category cannot function on their own, but rather run within a PROCESS run-time component.

Action

Specify a PROCESS run-time component.


CCEJMRE0000 A job with ID {0} cannot be found.
Explanation

A job with the specified ID may have never existed or it may have completed long before this request.

Action

Use the following URI to list all jobs that are running or recently completed: /cce/jobmanager/jobs


CCEJMRE0001 A node with alias {0} does not exist.
Explanation

There is no node with the given alias in the landscape.

Action

Add the node to the landscape.


CCEJMRE0002 A job with ID {0} on node {1} cannot be found.
Explanation

A job with the specified ID may have never existed or it may have completed long before this request.

Action

Use the following URI to list all jobs that are running or recently completed: /cce/jobmanager/landscapejobs/local where "local" is the node alias


CCELCRE0000 The lifecycle operation to execute is unknown.
Explanation

You specified a lifecycle operation that is not valid. Valid lifecycle operations are start, stop, restart, pause, resume, start in debug mode, and start in safe mode. Note, however, that a run-time component might support only a subset of the valid lifecycle operations.

Action

Specify a valid lifecycle operation.


CCELCYE0003 Error occured while executing lifecycle operation on a remote managed node with alias {0}. Remote task status is {1}
Explanation

Error occured while executing lifecycle operation on a remote managed node.

Action

Check the Command Central and target node Platform Manager logs.


CCELCYE0004 Error during lifecycle job execution.
Explanation

An error occurred during the lifecycle job execution.

Action

Check the logs for details about the error.


CCELCYE0005 At least one remote call has timed out.
Explanation

At least one remote lifecycle execution call has timed out.

Action

Check the remote Platform Manager logs for related errors.


CCELIRE0000 Error deleting license report with id: {0}
Explanation

An unexpected error occurred when trying to delete the License Report with the given ID.

Action

Check the report id provided and if valid, check the server log for any exception messages.


CCELIRE0001 Error deleting license reports.
Explanation

At least one of the license reports was not deleted successfully.

Action

Retry the delete operation later or contact Software AG Global Support.


CCELIRE0003 Exception while building license report Document, {0}: caught type({1}), msg({2})
Explanation

A problem was encountered while attempting to build a License Report XML document from its string representation.

Action

Consult Software AG Global Support.


CCELIRE0004 Invalid license manifest file.
Explanation

The contents of the specified file is invalid for license manifest files.

Action

Specify a valid license manifest file.


CCELIRE0007 The specified alias is not valid.
Explanation

No additional details.

Action

Specify a valid alias. The alias can include up to 100 ASCII characters, numbers, underscore (_), hyphen (-), and period (.).


CCELIRW0002 Error deleting the following reports: {0}
Explanation

The specified reports could not be deleted successfully.

Action

Check the server log for more details and try to delete the reports individually.


CCELITE0000 Error generating license report id!
Explanation

An error occurred when trying to generate a unique report ID for the license report snapshot.

Action

Retry the operation or contact Software AG Global Support.


CCELITE0001 Could not find a report with id {0}
Explanation

No license report with the specified report ID was found in the system.

Action

Check the report ID value and try again.


CCELITE0002 Error creating license snapshots directory {0}
Explanation

An error occurred when trying to create a filesystem directory to store the license snapshots.

Action

Check if there is enough disk space and/or contact Software AG Global Support.


CCELITE0003 Unable to get runtime component {0}/{1} caught: {2}
Explanation

During license data collection, an attempt to retrieve information about this runtime component failed. The issue may indicate a communication issue between Command Central and Platform Manager.

Action

This could be a temporary communications issue. If the problem persists, contact Software AG Global Support.


CCELITE0004 Unable to get configuration types for {0}/{1} caught: {2}
Explanation

During license data collection, an attempt to retrieve information about this runtime component failed. The issue may indicate a communication issue between Command Central and Platform Manager.

Action

This could be a temporary communications issue. If the problem persists, contact Software AG Global Support.


CCELITE0005 Unable to get configuration instances for {0}/{1} caught: {2}
Explanation

During license data collection, an attempt to retrieve information about this runtime component failed. The issue may indicate a communication issue between Command Central and Platform Manager.

Action

This could be a temporary communications issue. If the problem persists, contact Software AG Global Support.


CCELITE0006 Unable to get configuration data for {0}/{1}/{2} caught: {3}
Explanation

During license data collection, an attempt to retrieve information about this runtime component failed. The issue may indicate a communication issue between Command Central and Platform Manager.

Action

This could be a temporary communications issue. If the problem persists, contact Software AG Global Support.


CCELITE0007 Found null value for license configuration data for {0}/{1}/{2}
Explanation

During license data collection, an attempt to retrieve license information about this runtime component found an invalid license.

Action

Contact Software AG Global Support.


CCELITE0008 Expected a String value for license configuration data for {0}/{1}/{2}, found type {3}
Explanation

During license data collection, an attempt to retrieve license information about this runtime component found an invalid license.

Action

Contact Software AG Global Support.


CCELITE0010 Checksum verification failed for License Report with id {0} {1}.
Explanation

The license report file may be corrupted or been tampered with, which has resulted in an integrity check failure.

Action

Regenerate the license report and/or contact Software AG Global Support with the affected license report file.


CCELITE0011 Unable to generate and store license snapshot report; caught type: {0}, msg: {1}
Explanation

An issue was encountered either when generating, or saving the generated license report snapshot.

Action

Check the exception and message to identify the exact cause, or contact Software AG Global Support.


CCELITE0012 Unable to generate report, no report generator configured
Explanation

The issue occurred because of incorrect component configuration.

Action

Check the license report configuration or contact Software AG Global Support.


CCELITE0013 Error getting license report!
Explanation

An error occurred when trying to retrieve the requested license report.

Action

Check the cause and retry the operation.


CCELITE0014 Unable to parse license XML for {0}/{1} from string that follows; except msg: {2}. XML: {3}
Explanation

The license content retrieved from the Platform Manager could not be parsed.

Action

Check the exception message for the exact cause and/or contact Software AG Global Support. The error may occur if a license file is found that is not in a standard Software AG format.


CCELITE0015 Error generating pdf report for this reportId ''{0}''. Cause: {1}
Explanation

The attempt to transform the XML data failed to produce a PDF data stream.

Action

Generate another report and verify whether the XML response is well-formed.


CCELITE0016 Error generating pdf license report. No XML data stream available for ''{0}''
Explanation

The license reports module cannot produce a pdf report unless its canonical data is provided.

Action

Verify that the pdf generation task was executed properly using an existing report ID.


CCELITE0017 Error generating pdf license report. Unable to locate XSLT style sheet for pdf generation. ''{0}''
Explanation

The license tools bundle could not locate the XSLT style used to produce a pdf report.

Action

Contact Software AG Global Support.


CCELITE0018 Error applying license pdf report stylesheet ''{0}'' to XML data ''{1}''. Cause: {2}
Explanation

Unexpected errors were encountered while generating the license pdf report.

Action

Contact Software AG Global Support.


CCELITE0019 Unable to serialize a license report data object for ''{0}''. Cause: {1}
Explanation

The license report data object could not be serialized as input for pdf report generation.

Action

Contact Software AG Global Support.


CCELITE0020 Error verifying license report checksum.
Explanation

An error occurred when trying to verify the license report checksum when retrieving the report.

Action

Retry request later or contact Software AG Global Support.


CCELITE0022 Unable to open extended rights table ({0})
Explanation

The indicated value is not available.

Action

Contact Software AG Global Support.


CCELITE0023 Unable to load extended rights properties from {0}; caught: type({1}). message({2})
Explanation

A problem was encountered while loading the indicated file into memory.

Action

Contact Software AG Global Support.


CCELITE0024 Unable to close input stream from {0}; caught: type({1}). message({2})
Explanation

A problem was encountered while cleaning up after loading the indicated file into memory.

Action

Contact Software AG Global Support.


CCELITE0026 License manifest is already stored.
Explanation

The license manifest is already been stored with alias {0}.

Action

Specify a different license manifest.


CCELITE0027 Unable to store license manifest "{0}"; caught type: {1}, msg: {2}
Explanation

An issue was encountered when storing a license manifest.

Action

Check the exception and message to identify the exact cause, or contact Software AG Global Support.


CCELITE0028 Error creating storage location {0} for license manifests.
Explanation

An error occurred when trying to create a filesystem directory to store license manifests.

Action

Check access rights and disk space or contact Software AG Global Support.


CCELITE0029 Error retrieving license manifests.
Explanation

An error occurred when trying to retrieve the list of stored license manifests.

Action

Check the cause and retry the operation.


CCELITE0030 Could not find a license manifest with alias {0}
Explanation

No license manifest with the specified alias was found in the system.

Action

Check the license manifest alias value and try again.


CCELITE0031 Invalid license manifest.
Explanation

The specified file is not a valid license manifest.

Action

Specify a valid license manifest.


CCELITE0032 Checksum verification failed for LicenseMeteringConfiguration.xml file.
Explanation

The LicenseMeteringConfiguration.xml file which is delivered with the CCE installation is either corrupted, or modified.

Action

Contact Software AG Global Support to get a valid LicenseMeteringConfiguration.xml file.


CCELITE0034 Alias "{0}" already exists.
Explanation

A license manifest with the specified alias already exists.

Action

Specify a new alias for the license manifest.


CCELITE0035 License manifest alias missing.
Explanation

No license manifest alias has been specified.

Action

Specify a valid license manifest alias.


CCELITE0036 Deleting license manifest with alias "{0}" failed.
Explanation

An error occured while trying to delete the license manifest with the specified alias.

Action

Check the exception and message to identify the exact cause, or contact Software AG Global Support.


CCELITE0037 Deleting license manifests failed.
Explanation

An error occured while trying to delete the license manifests.

Action

Check the exception and message to identify the exact cause, or contact Software AG Global Support.


CCELITE0042 Invalid processor core class {0}.
Explanation

The specified processor core class is not valid.

Action

Specify a valid processor core class.


CCELITE0046 Checksum verification failed for the given License Manifest.
Explanation

The license manifest file is corrupted or been tampered with, which has resulted in an integrity check failure.

Action

Use original license manifest file from Software AG and/or contact Software AG Global Support with the affected license manifest file.


CCELITE0047 Cannot open license metering configuration file.
Explanation

The license metering configuration file could not be read.

Action

Contact Software AG support.


CCELITE0048 Updating {0} cache for node {1} failed.
Explanation

Updating the cache failed. The license metering report may contain invalid data.

Action

Contact Software AG support.


CCELITE0049 Processor core class is not available. Product cannot be checked.
Explanation

The Platform Manager where the product is installed did not provide the processor core class the node is running on.

Action

Contact Software AG Global Support.


CCELITE0050 Cannot find runtime status: {0}
Explanation

The run-time status of the current landscape XML file was not found.

Action

Provide a valid landscape XML file.


CCELITE0051 Cannot store license metering configuration data to file.
Explanation

An error occured while writing the license metering configuration data to a new file.

Action

Contact Software AG Global Support.


CCELITE0053 Platform Manager with version {0} is not sufficient for the license metering. Version 9.8 or higher is required.
Explanation

The version of the Platform Manager is {0}. Platform Manager version of 9.8 or higher is required for the license metering.

Action

Update the Platform Manager with version 9.8 or higher.


CCELITE0054 Consolidation of License Manifests failed.
Explanation

An error occurred during the consolidation of the license manifests.

Action

Contact Software AG support.


CCELITE0055 Collecting server details information failed.
Explanation

An error occurred during the collection of server details information.

Action

Contact Software AG support.


CCELITE0056 Generating license report compliance result failed.
Explanation

An error occurred during the generation of the license report compliance result.

Action

Contact Software AG Global Support.


CCELITE0057 License manifest for referenced location id {0} not found.
Explanation

The license manifest for the location id {0} has been removed.

Action

Add the license manifest for the location id {0} to Command Central or assign a different location id to the installation details in the landscape overview tab.


CCELITE0058 Unable to retrieve Command Central port number.
Explanation

An error occured while trying to retrieve the port number of Command Central.

Action

Ensure that the Plaform Manager that belongs to this Command Central installation is running.


CCELITE0059 The license metering cannot be stopped, because metering is required.
Explanation

One of the active license manifests contains a product for which license metering is required, so that it is not possible to stop the metering.

Action

Remove the license manifest that requires metering or keep license metering running.


CCELITE0060 No node alias specified.
Explanation

The alias of a node was not specified.

Action

Specify a valid node alias. The available node aliases can be determined from the landscape configuration.


CCELITE0061 No product id specified.
Explanation

The ID of the product for which contracts are to be retrieved is not specified.

Action

Specify a valid product ID. The available product IDs can be determined from the landscape configuration.


CCELITE0062 Node alias {0} is invalid.
Explanation

A node with the specified alias {0} is not registered in Command Central.

Action

Specify a valid node alias. The available node aliases can be determined from the landscape configuration.


CCELITE0063 No server details found for node with alias {0}.
Explanation

The server details could not be determined for the node with the specified alias {0}.

Action

Make sure that the Platform Manager on the node with the specified alias is running.


CCELITE0064 No product with id {0} found on node with alias {1}.
Explanation

There is no product with the specified ID {0} installed on the node with the specified alias {1}.

Action

Specify the ID of a product that is installed on the node with the specified alias. The available product IDs can be determined from the landscape configuration.


CCELITE0065 Platform Manager on node with alias {0} is not running.
Explanation

The Platform Manager on the node with alias {0} is not running.

Action

Start Platform Manager on the node with alias {0} and execute the command again.


CCELITE0068 Version {0} of license manifest is not supported. Highest supported version is {1}.
Explanation

The version {0} of the specified license manifest is higher than the version {1} currently supported.

Action

Update Command Central to a version that supports the version of the specified license manifest.


CCELITE0069 Version {0} of license report is not supported. Highest supported version is {1}.
Explanation

The version {0} of the specified license report is higher than the version {1} currently supported.

Action

Update Command Central to a version that supports the version of the specified license report.


CCELITE0070 Aggregated license report with alias {0} already exists.
Explanation

An aggregated license report with the alias {0} already exists.

Action

Specify an aggregated license report with a different alias.


CCELITE0071 Alias {0} already exists.
Explanation

A license key with the specified alias {0} already exists.

Action

Specify a different alias.


CCELITE0072 ProductCode and productId specified.
Explanation

You must specify either productCode or productId.

Action

Remove either productCode or productId.


CCELITE0073 Platform and OS specified.
Explanation

You must specify either platform, or operating system.

Action

Remove either the platform or the operating system.


CCELITE0074 Invalid platform(s) {0} specified.
Explanation

The specified platform(s) {0} is invalid.

Action

Specify valid platform(s).


CCELITE0075 Specified installationType {0} is invalid
Explanation

The specified installationType {0} is invalid.

Action

Specify a valid installationType.


CCELITE0076 Invalid productCode {0} specified.
Explanation

The specified productCode {0} is invalid.

Action

Specify a valid productCode.


CCELITE0077 Invalid productId {0} specified.
Explanation

The specified productId {0} is invalid.

Action

Specify a valid productId.


CCELITE0078 Invalid os {0} specified.
Explanation

The specified OS {0} is invalid.

Action

Specify valid OS.


CCELITE0080 Specified licenseKeyType {0} is invalid.
Explanation

The specified licenseKeyType {0} is invalid.

Action

Specify a valid licenseKeyType.


CCELITE0081 Error verifying landscape checksum.
Explanation

An error occurred when trying to verify the landscape checksum.

Action

Contact Software AG Global Support.


CCELITE0082 Invalid license key.
Explanation

The specified file is not a valid license key. A valid license key must not contain binary data or be empty.

Action

Specify a valid license key.


CCELITE0083 Invalid license key: {0}.
Explanation

Specified file is not a valid license key.

Action

Specify a valid license key.


CCELITE0084 A node with the specified alias does not exist.
Explanation

An installation (node) with the specified alias name does not exist.

Action

Specify a valid alias name for an existing installation (node).


CCELITE0085 A run-time component with the specified id does not exist.
Explanation

A run-time component with the specified ID does not exist on the node(s).

Action

Specify an ID of an existing runtime component.


CCELITE0090 Invalid productCode {0} and productId {1} specified.
Explanation

The specified productCode {0} and productId {1} is invalid.

Action

Specify a valid productCode and productId.


CCELITE0091 Unexpected exception occurred: {0}
Explanation

An unexpected exception occurred: {0}

Action

Contact Software AG support.


CCELITE0092 Failed to update server time stamp for server {0} : {1}
Explanation

Failed to update server time stamp for server {0} : {1}

Action

Make sure the Platform Manager on server {0} is running.


CCELITE0093 Error creating URL from urlString {0}.
Explanation

Error creating URL from urlString {0}.

Action

Specifiy a valid URL.


CCELITE0094 License key with specified alias {0} not found.
Explanation

A license key with the specified alias {0} is not stored in the license key manager.

Action

Specify the alias of a stored license key.


CCELITE0102 Alias must be specified for custom license keys.
Explanation

You must specify an alias when adding a custom license key.

Action

Specify a license key alias.


CCELITE0105 Invalid license key archive.
Explanation

The specified file is not a valid license key archive. A valid license key archive must contain license keys.

Action

Specify a valid license key archive.


CCELITE0106 License key already stored with alias {0}.
Explanation

This license key is already stored with alias {0}.

Action

Specify another license key, or add the license key with a different alias.


CCELITE0107 Licensing data is not available because the cache is not accessible.
Explanation

All license metering data, like license keys, license reports, and license manifests, is stored in the cache, which is currently inaccessible.

Action

This problem can occur if the machine is slow. Ensure that the machine has enough resources and try it again.


CCELITE0109 Invalid expiration date {0} specified.
Explanation

The specified expiration date {0} is invalid.

Action

Specify a valid expiration date with format YYYY/MM/DD


CCELITE0110 No license key(s) found.
Explanation

Currently there are no license keys stored that can be added to a license manifest {0}.

Action

Add license keys to Command Central first.


CCELITI0033 Type of installation is not defined. Product cannot be checked.
Explanation

The Platform Manager where the product is installed does not have a type of installation (Development, Production, Test) defined.

Action

Define a type of installation for your Platform Manager.


CCELITI0038 Product is not found in the license manifest(s).
Explanation

You have no valid license for the installed product.

Action

Contact Software AG for licensing your product.


CCELITI0039 Core class does not match: {0} is installed, {1} is licensed.
Explanation

The core class of the Plarform Manager server does not match the licensed core class.

Action

Contact Software AG Global Support for licensing a higher core class.


CCELITI0040 License capacity does not match: {0} {1} used, {2} {1} licensed.
Explanation

The number of units used does not match the licensed number of units.

Action

Contact Software AG Global Support for licensing a higher number of units.


CCELITI0043 Installation type does not match: {0} is installed, {1} is licensed.
Explanation

The installation type of the Platform Manager server does not match the licensed installation type.

Action

Contact Software AG Global Support for licensing the appropriate installation type.


CCELITW0021 Unable to translate extended rights code ({0}), not found
Explanation

The table used to look up license Extended Rights codes does not contain the indicated value.

Action

Contact Software AG Global Support.


CCELITW0025 LicenseReportFactory - unable to determine runtime status for component ({0}) on node ({1}); caught this: type({2}), msg({3})
Explanation

Command Central can not determine if the identified component is up or down.

Action

This behavior could occur when the Platform Manager node is down, or because of some other communication issue. If this problem persists when the Platform Manager node is up, contact Software AG Global support.


CCELNDE0000 The node alias is invalid.
Explanation

An installation (node) with the specified alias name does not exist.

Action

Specify the valid alias name for an existing installation (node).


CCELNDE0001 "{0}" Run-time component is not found on node "{1}".
Explanation

The Landscape Inventory cache does not contain run-time component "{0}" for node "{1}".

Action

Use a combination of an existing run-time component Id and node alias or refresh the Landscape Inventory run-time component cache and try again.


CCELNDE0002 Invalid node alias or url.
Explanation

The specified alias name or URL for an installation (node) is not valid.

Action

Specify a valid alias name or URL.


CCELNDE0003 Specify a valid URL.
Explanation

The URL field in NodeInfo contains an invalid value.

Action

Check if the URL syntax of the node is valid.


CCELNDE0004 A node with a different alias for the same host:port already exist.
Explanation

An installation (node) with a different alias name already exists for the installation with the specified host name and port number.

Action

None.


CCELNDE0006 Node {0} could not be created.
Explanation

A node with alias {0} could not be created because another node with alias {1} already exists.

Action

Provide a different alias for the new node.


CCELNDE0008 Can not retrieve node's product information for {0}
Explanation

Command Central can not connect to Platform Manager to retrieve Platform Manager product information.

Action

Make sure the node is online.


CCELNDE0009 Can not update inventory cache because of failure during retrieval of remote inventory items.
Explanation

The remote request for inventory items failed and the inventory cache can not be updated.

Action

Ensure that the node in the request is active or the target node inventory is responsive.


CCELNDE0010 The node alias cannot be empty or longer than 100 characters.
Explanation

The specified node alias is incorrect, either because the node alias is empty, or it exceeds 100 characters.

Action

Specify a correct node alias and try again.


CCELNDE0011 The host name should be between 2 and 253 characters long.
Explanation

The host name is incorrect, because it is shorter or longer than the specified character length limitations.

Action

Provide a correct host name and try again.


CCELNDE0012 The node display name should not be longer than 100 characters.
Explanation

The node display name is incorrect, because it is longer than 100 characters.

Action

Specify a correct node display name and try again.


CCELNDE0013 Trying to use unavailable NodeInfo element.
Explanation

The specified element of type NodeInfo does not exist.

Action

Specify a NodeInfo element that is available.


CCELNDE0014 Node alias is not valid. Only letters, numbers, -, _ and . are allowed.
Explanation

The specified node alias is incorrect, because it uses special characters that are not allowed.

Action

Specify a correct node alias and try again.


CCELNDI0005 You have exhausted the number of licensed nodes that can be configured. To add more nodes, contact your system administrator or Software AG support to get the license upgraded.
Explanation

You have exhausted the number of licensed nodes that can be configured.

Action

To add more nodes, contact your system administrator or Software AG support to get the license upgraded.


CCELSRE0001 The node alias cannot be updated.
Explanation

You cannot update the alias name for an installation (node).

Action

Create a new installation or update the existing installation without changing the alias name.


CCELSRE0002 The environment alias cannot be updated.
Explanation

You cannot change the alias name of an environment.

Action

Create a new environment or update the existing environment without changing the alias name.


CCELSRE0004 Node Aliases not specified!
Explanation

To add installations (nodes) to an environment, you must specify the alias names of the installations that you want to add.

Action

Try again, this time specifying the installation (node) alias names as query parameters.


CCELSRE0005 Alias not specified or invalid.
Explanation

The environment could not be created or updated because the alias is invalid.

Action

Specify a valid alias. You can view a list of installations and theiraliases using the following command: cc list landscape nodes


CCELSRE0006 Node {0} could not be created.
Explanation

A node with alias {0} could not be created because another node with alias {1} already exists.

Action

Provide a different alias for the new node.


CCELSRE0007 Environment {0} could not be created.
Explanation

An environment with alias {0} could not be created because another environment with alias {1} already exists.

Action

Provide a different alias for the new environment.


CCELSRE0008 Trying to use unavailable NodeInfo element.
Explanation

Trying to use element of type NodeInfo that doesn't exist.

Action

Provide an available NodeInfo element.


CCELSRE0012 Alias not specified.
Explanation

The node could not be created because the alias is missing.

Action

Specify a valid alias.


CCELSRE0013 Node {0} could not be created.
Explanation

A node with alias {0} could not be created because the specified location id {1} does not exist.

Action

Provide an existing location id. Available location id(s): {2}


CCELSRE0014 Node {0} could not be updated.
Explanation

A node with alias {0} could not be updated because the specified location id {1} does not exist.

Action

Provide an existing location id. Available location id(s): {2}


CCELSRE0015 Node {0} could not be created.
Explanation

A node with alias {0} could not be created because the specified installation type {1} is invalid.

Action

Provide a valid installation type. Valid installation types are: {2}


CCELSRE0016 Node {0} could not be updated.
Explanation

A node with alias {0} could not be updated because the specified installation type {1} is invalid.

Action

Provide a valid installation type. Valid installation types are: {2}


CCELSRI0000 A node with the specified alias does not exist.
Explanation

No node alias matches {0}

Action

Provide a valid node alias.


CCELSRI0003 The environment with the provided alias doesn't exist.
Explanation

An environment with the specified alias name does not exist.

Action

Specify the valid alias name of an existing environment.


CCEMIGE0019 Extracting source version failed.
Explanation

Command Central failed to extract the source version from the bundles.info file.

Action

Ensure that the bundles.info file is at the correct location.


CCEMIGI0064 Do you want to migrate Local Platform Manager HTTP and HTTPS configurations?

CCEMIGI0065 Do you want to migrate Local Platform Manager password manager data?

CCEMIGI0066 Do you want to migrate Local Platform Manager single sign-on configuration data?

CCEMIGI0067 Do you want to migrate Local Platform Manager custom wrapper configuration?

CCEMIGI0068 Local Platform Manager password manager data migration selected.

CCEMIGI0069 Do you want to migrate outbound SSL connection settings configuration data?

CCEMIGI0070 Do you want to migrate Command Central server LDAP configuration?

CCEMIGI0071 Do you want to migrate Local Platform Manager proxy configurations?

CCEMIGI0072 Copying bootstrap installers skipped because creating installers directory failed.

CCEMIGI0073 Command Central Bootstrap installers migration selected.

CCEMIGI0074 Copying bootstrap installers skipped because there are no installers available.

CCEMIGI0075 Do you want to migrate Bootstrap Installers?

CCEMIGI0076 Do you want to migrate Local Platform Manager roles?

CCEMIGI0077 Do you want to migrate Local Platform Manager users and groups?

CCEMIGI0078 Local Platform Manager users and groups migration selected.

CCEMONE0001 {0} on {1} ({2}) became unresponsive. Component restart may help to resolve this quickly.
Explanation

{0} on {1} ({2}) became unresponsive.

Action

Component restart may help to resolve this quickly.


CCEMONE0002 {0} on {1} ({2}) failed. You will need to start it again and investigate the cause of the failure.
Explanation

RuntimeStatus of {0} went from "ONLINE" to "FAILED."

Action

Try to restart the operation. Have a look at {1} ({2}) for additional information about its status.


CCEMONE0006 {0} of {1} on {2} ({3}) spiked into critical zone. The component may become overloaded!
Explanation

The kpi {0} of {1} went from MARGINAL into CRITICAL status.

Action

Please have a look on {2} ({3}) to find out why this is happening.


CCEMONE0011 Node with alias {0} does not exist.
Explanation

There is no node with the specified alias registered with Command Central.

Action

Ensure that the node alias is spelled correctly and that it is registered with Command Central.


CCEMONE0012 No runtime monitoring information could be found for component {0}.
Explanation

The landscape nodes do not have monitoring information for the specified component.

Action

Check the landscape nodes for the for the specified component. Ensure that the specified component exists on the nodes and that it is spelled correctly.


CCEMONE0013 Component {0} does not exist on node {1}.
Explanation

The specified runtime component does not exist on the specified SPM node.

Action

Ensure that the specified component is spelled correctly and exists on the specified node.


CCEMONE0014 Removing alert with id {0} failed.
Explanation

The specified alert could not be found.

Action

Ensure that the alert with the specified ID exists in the Command Central landscape.


CCEMONE0015 Error getting runtime component {0} for node {1}
Explanation

Runtime component {0} is not available in cache.

Action

Try to update the inventory cache and make sure the node in the request is active and the target node inventory is responsive.


CCEMONE0016 includeChildren parameter requires NodeAlias and RuntimeComponentId to be provided.
Explanation

The <includeChildren> parameter requires the <nodeAlias> and <runtimeComponentId> parameters to be provided.

Action

Provide values for the <nodeAlias> and <runtimeComponentId> parameters.


CCEMONE0017 Alerts filtering requires both NodeAlias and RuntimeComponentId.
Explanation

The filtering of alerts requires both <NodeAlias> and <RuntimeComponentId> parameters to be provided.

Action

Provide values for both <NodeAlias> and <RuntimeComponentId> parameters.


CCEMONE0018 Error while handling event [{0}].
Explanation

There was an error while handling an event.

Action

Check the logs for previous errors.


CCEMONE0019 Error polling SPM node [{0}].
Explanation

The monitoring states for a runtime component on a target node could not be retrieved.

Action

Check the logs for previous errors.


CCEMONE0020 Error during retrieving of monitoring state of {0} on node {1}.
Explanation

The monitoring state for a runtime component on a target node could not be retrieved.

Action

Check the logs for previous errors.


CCEMONE0021 Error polling SPM node [{0}]. Node Status will be set to {1} and the Runtime State for all instances of the node will be set to {2}.
Explanation

The monitoring states on a target node could not be retrieved and as a result all states will be set to unknown.

Action

Check the logs for previous errors.


CCEMONE0022 Could not retrieve Cache. Monitoring stopped.
Explanation

The Command Central cache manager could not be retrieved.

Action

Contact Software AG Global Support.


CCEPROE0000 No node with alias, {0}, exists in the environment.
Explanation

The node alias specified in the request does not exist.

Action

Resubmit the request with an existing node alias.


CCEPROE0001 No artifacts specified in uninstall request.
Explanation

The uninstall request did not specify any artifacts.

Action

Resubmit the request with a list of valid artifacts.


CCEPROE0002 {0} is an invalid/unsupported type for artifacts.
Explanation

Only Product and Fix are valid artifact types.

Action

Resubmit the request with valid artifacts.


CCEPROE0003 {0} MASTER repository configuration is invalid.
Explanation

The repository configuration misses the location URL.

Action

Remove and add this repository again to ensure it has valid remote location URL.


CCEPROE0004 {0} repository is not configured with user credentials.
Explanation

The repository configuration misses username property value. Most likely the repository was not configured with the required user credentials after it was discovered.

Action

Configure the repository with valid user credentials.


CCEPROE0005 {0} repository is not configured with user credentials.
Explanation

The repository configuration misses the username property value. Most likely the repository was not configured with the required user credentials after it was discovered.

Action

Configure the repository with valid user credentials.


CCEPROE0006 {0} IMAGE repository configuration is invalid.
Explanation

The repository configuration misses the image file location.

Action

Edit this repository to ensure it has a valid image location.


CCEPROE0007 Node {0} is already registred and reports ONLINE status.
Explanation

The node that you are attempting to bootstrap already reports ONLINE status. Most likely you specified a node that is already setup and ready to use.

Action

Use a node alias for a Platform Manager that is not running yet. It can be a node that is already registered but does not have a backing Platform Manager, or a completely new node alias that will be added to the landscape when the Platform Manager bootstrap operation is finished.


CCEPROE0008 Repository {0} type is not a MASTER repository.
Explanation

Bootstrap images can be generated only from a MASTER PRODUCT repository. Other types are not supported.

Action

Specify a configured MASTER PRODUCT repository with valid user credentials and try again.


CCEPROE0009 Repository {0} is not configured with a user password.
Explanation

MASTER repositories require configuration of user credentials.

Action

Ensure that the selected repository is configured with a valid username and password.


CCEPROE0010 Target machine platform is not specified.
Explanation

The bootstrap operation requires the target platform to be explicitely defined.

Action

Select platform of the target machine that Platform Manager will be installed


CCEPROE0011 Cannot match requested version {0} to any of the configured repositories.
Explanation

The version you requested to install does not match the available repositories.

Action

Select a specific repository or add new repositories that will match the version you requested.


CCEPROE0012 No PRODUCT repositories are defined to complete the operation.
Explanation

You did not explicitly specify a repository or version to use and Command Central cannot automatically pick a repository.

Action

Ensure that you have configured a PRODUCT repository that contains the required version of Platform Manager.


CCEPROE0013 Remote machine credentials are not provided.
Explanation

Command Central cannot connect to a remove machine without valid user credentials.

Action

Provide user credentials for the remote machine on which you are installing Platform Manager.


CCEPROE0014 Error while retrieving configuration.
Explanation

Internal error while retrieving common proxy configuration.

Action

Make sure COMMON-PROXY configuration exists.


CCEPROE0015 Remote access service returned {0} jobs while 1 was expected.
Explanation

Only one remote operation was initiated but a different amount of jobs was returned.

Action

Contact Software AG Global Support.


CCEPROE0016 Java not found on {0}.
Explanation

The Java Runtime Environment is not available on the given node.

Action

Install Java Runtime Environment and try again.


CCEPROE0017 Remote command returned a non-zero exit code: {0}
Explanation

The remote installer command failed. Check the logs for more information.

Action

Re-try the operation. If the problem persists, contact Software AG Global Support.


CCEPROE0018 Can not connect to Platform Manager running on host {0} and port {1} due to wrong credentials.
Explanation

Can not connect to Platform Manager due to wrong credentials.

Action

Provide valid Platform Manager credentials.


CCEPROE0026 The nodeAlias field is required for each node that is added.
Explanation

Node alias is required field for each node that is added.

Action

Provide node alias.


CCEPROE0027 The hostname field is required for each node that is added.
Explanation

A hostname is required field for each node that is added.

Action

Provide a hostname.


CCEPROE0028 Platform Manager port is required field for each node that is added.
Explanation

A Platform Manager port is required field for each node that is added.

Action

Provide a port field value.


CCEPROE0029 Platform Manager nodes are available, but the provided credentials for them are wrong: {0}
Explanation

Platform Manager nodes are available, but the provided credentials for them are incorrect.

Action

Provide valid credentials for the Platform Manager nodes.


CCEPROE0030 The Platform Managers are not remotely accessible: {0}
Explanation

The specified Platform Managers are not remotely accessible.

Action

Check the connectivity and the remote accessibility to the Platform Managers.


CCEPROE0034 Error occured while installing {2} on node {0}. Remote task status is {1}
Explanation

The selected artifact was not installed on the remotely managed node.

Action

Check the error logs for more details about this error.


CCEPROE0038 The maximum number of retries for installing artifacts from repository {0} on node {1} due to possible Platform Manager restarts is reached.
Explanation

The maximum number of retries for installing artifacts from repository {0} on node {1} due to possible Platform Manager restarts is reached.

Action

Check the logs for details about previous attempts to install artifacts to determine what the issues are.


CCEPROE0042 The maximum number of retries for uninstalling artifacts on node {0} due to possible Platform Manager restarts is reached.
Explanation

The maximum number of retries for uninstalling artifacts on node {0} due to possible Platform Manager restarts is reached.

Action

Check the logs for details about previous attempts to install artifacts to determine what the issues are.


CCEPROE0043 Creating an image with name {0} failed.
Explanation

Creating an image from a mirror repository that is not on the local Platform Manager is not supported.

Action

Create a mirror repository on the local Platform Manager node and use it for bootstrapping.


CCEPROE0044 Bootstrapping Platform Manager on installation with alias {0} failed.
Explanation

The export of artifacts from a mirror repository with name {0} into image with name {1} failed.

Action

See the Platform Manager logs for more information.


CCEPROE0046 Bootstrap installer {0} not found.
Explanation

The bootstrap installer file was not found under install_dir/profiles/CCE/data/installers

Action

Make sure the specified bootstrap installer file is in the correct location.


CCEPROE0047 unzip command not found on {0}
Explanation

The unzip package is not present in your cygwin environment.

Action

Install unzip in your cygwin environment and try again.


CCEPROE0048 Local bootstrap completed with exit code: {0}
Explanation

The execution of the bootstrap operation failed unexpectedly.

Action

Check the bootstrap logs for more information.


CCEPROE0049 The installers directory does not exist.
Explanation

The directory containing the bootstrap installers does not exist.

Action

Create the install_dir/profiles/CCE/data/installers directory.


CCEPROE0050 Installer platform mismatch! Expected W64 but found {0}.
Explanation

The installation cannot be performed, because the incorrect platform is selected.

Action

Select an installer with the correct platform.


CCEPROE0051 {0} is not a valid installer directory or it does not exist.
Explanation

The bootstrap installer archive may not have been extracted correctly.

Action

Retry the operation or contact Software AG global support.


CCEPROE0052 Invalid number of Windows scripts in the installer directory: {0}
Explanation

The bootstrap installer archive must contain exactly one executable script (batch).

Action

Obtain the correct bootstrap installer.


CCEPROE0055 Platform Manager nodes are available, but the installation directory is different than requested: {0}
Explanation

The Platform Manager nodes are available, but the installation directory is different than requested.

Action

Change the installation directory or stop the available Platform Manager if you want to bootstrap a new instance on the same ports.


CCEPROE0056 Error occured while uninstalling {2} on node {0}. Remote task status is {1}
Explanation

The selected artifact was not uninstalled on the remotely managed node.

Action

Check the error logs for more details about this error.


CCEPROE0057 Repository name is required when using an internal remote Command Central bootstrap installer.
Explanation

Repository name is required when using an internal remote Command Central bootstrap installer.

Action

Provide a repository name in the bootstrap info.


CCEPROE0058 The internal remote repository {0} is not registered.
Explanation

The provided internal remote repository is not registered.

Action

Register the repository before executing the bootstrap operation.


CCEPROE0059 The internal remote repository should be of type MASTER.
Explanation

The internal remote repository should be of type MASTER.

Action

Provide a repository of type MASTER for bootstrapping.


CCEPROW0045 The SSH server did not return the exit code of the bootstrap operation. The operation has completed but it is not clear if it was successful or not.
Explanation

In some cases the SSH server may not return the exit code of the executed operation. This makes it unclear if the operation was successful or not.

Action

Examine the installation logs on the remote node to make sure the installation was successful.


CCEPRRE0000 Please provide {0} which you want to uninstall.
Action

Please provide {0} which you want to uninstall.


CCERARE0000 Not all mandatory parameters are specified.
Explanation

Some of the parameters required for this request are missing.

Action

Check the Command Central documentation for the required parameters.


CCERARE0001 Nothing has been scheduled for execution for this request.
Explanation

This request should start jobs for execution, but no jobs have started.

Action

Check the logs for errors why the request has not terminated properly.


CCERARE0002 Remote Access Service is missing.
Explanation

A required service is missing.

Action

Check whether the remote-access bundle is started and has registered any services.


CCERARE0003 The private key must be specified when certificate is used for authentication.
Explanation

The selected authorization method is "certificate", however, a path to the private key is not specified.

Action

Specify the path to the private key.


CCEREAE0003 Authentication method {0} not supported.
Explanation

The specified authentication method is not supported.

Action

Check the Command Central documentation for the supported authentication methods.


CCEREAE0004 The provided private key does not exist: {0}
Explanation

The specified file that contains the private key does not exist on the file system.

Action

Make sure the private key is available.


CCEREAE0005 Remote host should be specified.
Explanation

Remote host is not specified and a connection cannot be established.

Action

Specify the remote host.


CCEREAE0007 {0} not found on {1}
Explanation

The specified path cannot be found on the target host.

Action

Make sure the specified path exists and try again.


CCEREAE0008 Invalid output from df: {0}
Explanation

The output of the df command does not match the POSIX standard.

Action

Make sure the target system has a POSIX compliant df command.


CCEREAE0009 The home directory of user {0} on host {1} could not be found.
Explanation

The home directory of the specified user on the specfied host could not be found.

Action

Check the configuration of the remote endpoint.


CCEREAE0010 Cannot close remote receive session.
Explanation

The remote session for receiving files cannot be closed.

Action

Check the logs for previous erros.


CCEREMW0000 Error producing zipped log source contents. Node alias: {0}, RuntimeComponent: {1}, Log Source Aliases: {2} Details: {3}
Explanation

An error occurred while producing the zipped archive containing a collection of log source contents on the Command Central server.

Action

Try again. If the problem persists, contact Software AG Global Support.


CCEREMW0001 Error attempting to close a file store used to produce zipped collection of log source contents.
Explanation

An error occurred while closing the zip file system object containing a collection of log source file contents.

Action

No action required.


CCEREMW0002 Error attempting to delete a temporary file used to create a zipped collection of log source contents. Filename: {0}
Explanation

An attempt to delete the specified file has failed.

Action

Locate the file on the server hosting Command Central and delete the file if it still exists.


CCEREMW0004 Error producing zipped log source contents. Node alias: {0} Details: {1}
Explanation

An error occurred while producing the zipped archive containing a collection of log source contents on the Command Central server.

Action

Try again. If the problem persists, contact Software AG Global Support.


CCEREPE0000 No repository with id, {0}, exists on managed node, {1}
Explanation

The specified repository does not exist.

Action

Ensure the correct repository id is specified in the request, or add the desired repository to the managed node.


CCEREPE0001 No repository with id, {0}, exists on managed node, {1}
Explanation

The specified repository does not exist.

Action

Ensure the correct repository id is specified in the request, or add the desired repository to the managed node.


CCEREPE0002 No such node, {0}
Explanation

The node alias specified in the request does not exist.

Action

Specify the correct node alias, or add the relevant node to the environment.


CCEREPE0003 The specified image location does not exist.
Explanation

The specified location for an image repository was not found on the file system.

Action

Provide a valid location for the image repository.


CCEREPE0004 The specified repository does not exist.
Explanation

The specified repository was not found.

Action

Check the repository name and provide the name of an existing repository.


CCEREPE0005 Parameters cannot be empty or missing.
Explanation

All parameters are required.

Action

Specify values for all parameters.


CCEREPE0006 A repository with this name already exists.
Explanation

The name of the repository should be unique.

Action

Check the repository name and provide a unique name for the repository.


CCEREPE0007 A repository at the same location already exists.
Explanation

Two or more repositories cannot point to the same location.

Action

Provide a unique location for the new repository.


CCEREPE0008 The specified repository points to an image file but the repository type is not image.
Explanation

The specified repository cannot point to and image file, because the repository type is not image.

Action

Specify the correct repository type.


CCEREPE0009 There is no repository to register.
Explanation

No repository is found for the specified name.

Action

Check the repository and resubmit the request.


CCEREPE0010 User credentials are missing.
Explanation

No user credentials are specified for the repository.

Action

Add user credentilas for the repository.


CCEREPE0011 Connection to node {0} failed.
Explanation

Could not connect to node {0}.

Action

Check if the node is online.


CCEREPE0012 Repository with type {0} does not exist.
Explanation

The repository with the specified type does not exist.

Action

Specify an existing repository type for the repository.


CCEREPE0013 Repository content cache invalidate failed.
Explanation

Invalidation of the content cache for repository {0} and nodeAlias {1} failed.

Action

See the Command Central logs for more details.


CCEREPE0015 Repository with the specified name: {0} does not exists.
Explanation

Importing content from the repository with name: {0} failed because a repository with the specified name was not found.

Action

Check the repository name and provide the name of an existing repository.


CCEREPE0020 Error occured while importing artifacts from repository with name: {0} to mirror repository with name: {1} for platforms: {2}
Explanation

An error occured while importing artifacts from repository with name: {0} to mirror repository with name: {1} for platforms: {2}

Action

See the corresponding Platform Manager logs for more details.


CCEREPE0024 Mirror repository with name: {0} is not published or registered on Command Central.
Explanation

Command Central cannot identify the specified mirror repository.

Action

Check if a mirror repository with name: {0} is published and registered on Command Central. Note that the Refresh operation refreshes a published mirror repository immediately after it is created or at a later point in time.


CCEREPE0029 Local mirror repository with name {0} can not be removed on target node {1}
Explanation

The local mirror repository with name {0} can not be removed on the target node {1}

Action

See the corresponding Platform Manager logs fro more details.


CCEREPE0035 Remote task failed: {0}
Explanation

Remote task failed: {0}

Action

See the corresponding Platform Manager logs for more details.


CCEREPE0036 Intiating mirror operation not from an image repository and without selecting "Product Repositories" is not supported.
Explanation

This operation is not supported as it might be time consuming because of the size of the source repository.

Action

Either select a product repository, or change the source repository to an image repository.


CCEREPE0038 Cannot delete Mirror repository with name: {0} because node with alias: {1} does not exists. Register node for host:{2} and port:{3}.
Explanation

The mirror repository is physically stored on {1} node, which was deleted and is not now registered in Command Central.

Action

Add the node with alias: {1} , host: {2} and port: {3}


CCEREPE0039 Cannot perform mirror operation because node with alias: {0} does not exists any more. Register again the node with alias: {0} for host: {1} and port: {2}.
Explanation

The mirror repository is physically stored on {0} node, which was deleted and is not now registered in Command Central.

Action

Add the node with alias: {0} , host: {1} and port: {2}


CCEREPE0041 Content of repository with displayName : {0} cannot be loaded.
Explanation

The content of the repository with displayName : {0} cannot be listed.

Action

Use a different repository type or check all logs for details about the error.


CCEREPE0042 Generation of repository status report for repository {0} will be skipped because connectivity validation failed.
Explanation

Generating the Repository Status report will be skipped and the list content operation will not be triggered.

Action

Check if the proxy is available and if the Platform Manager proxy configuration is set correctly. Also, check if the user credentials are valid.


CCEREPE0043 Creating a mirror repository failed because the source repository is not specified.
Explanation

The source repository from which to create the mirror repository is not specified.

Action

Specify at least one source repository. You can specify a master, image, or another mirror repository.


CCEREPE0044 Attempt to connect to {0} product repository from {1} installation timed out.
Explanation

Internet access is required to connect to this repository. The error occurred either because the proxy for the local Platform Manager is not configured, or the metadata and the user credentials for the repository are not correct.

Action

Configure a proxy for the local Platform Manager and check the repository metadata.


CCEREPE0048 Repository fix content cache update failed.
Explanation

An explicit repository fix content cache update failed during the regular cache update.

Action

Check if the connection to the fix repository is successful.


CCEREPE0049 Remote task failed: {0}
Explanation

Remote task failed\: {0}

Action

Check the corresponding Platform Manager logs for more details about the error.


CCEREPE0052 Error while retrieveing credentials with alias {0}.
Explanation

A credentials alias is not defined.

Action

Try again using an existing credentials alias.


CCEREPE0053 The specified repository name {0} is not valid.
Explanation

No additional details.

Action

Specify a valid repository name. The name can include ASCII characters, numbers, underscore (_), hyphen (-), and period (.).


CCEREPE0054 The specified repository was not found in the respository cache.
Explanation

The specified repository was not found in the respository cache.

Action

Contact Software AG Global Support.


CCEREPE0055 The repository cannot be deleted because it is used as source by the {0} repository.
Explanation

The repository cannot be deleted because it is used as source by the {0} repository.


CCEREPE0056 Cannot connect to mirror repository {0} hosted on Platform Manager that has HTTP port disabled.
Explanation

The HTTP port for the host Platform Manager is disabled, but connection via SSL is possible only for mirror repositories hosted on Platform Manager 10.3 or higher.

Action

Enable SPM HTTP port , use a master repository, or migrate to 10.3 or higher.


CCERPRE0000 The repository name is not specified.
Explanation

The requested operation requires a repository name.

Action

Check the input and provide a repository name.


CCERPRE0001 Repository with the specified name {0} already exists.
Explanation

The repository name must be unique.

Action

Check the repository name and provide a unique name for the repository.


CCERPRE0002 Repository with the specified name {0} does not exists.
Explanation

Editing the repository failed, because a repository with the specified name was not found.

Action

Check the repository name and provide the name of an existing repository.


CCERPRE0003 Unknown repository type. Use one of {0}
Explanation

The specified repository type is not supported by Command Central.

Action

Use one of the suggested repository types.


CCERPRE0004 Destination is not specified.
Explanation

The destination parameter is missing.

Action

Specify a value for the destination parameter. For example, dest=myfixes.zip


CCERPRE0005 Destination parameter contains invalid characters.
Explanation

The destination parameter cannot contain file path manipulation characters.

Action

Specify a proper destination value. For example, dest=myfixes.zip


CCERPRE0006 Export image job is not found.
Explanation

The job responsible for creating an image is not found on the local Platform Manager.

Action

Check the logs for indication what went wrong.


CCERPRE0007 The specified path for the image file is not valid.
Explanation

The path specified for the image file is not valid.

Action

Provide a valid path for the image file.


CCERPRE0008 The specified repository content type ( {0} ) did not match the actual content type of the repository ( {1} ).
Explanation

The specified repository content type ( {0} ) did not match the actual content type of the repository ( {1} ).

Action

Verify that the specified repository content type is correct.


CCERPRE0009 The specified repository image file location "{0}" is not valid.
Explanation

The specified repository image file location "{0}" is not valid.

Action

Provide a valid repository image file location.


CCERPRE0010 The artifact : {0} is not found in the repository : {1}
Explanation

The identifier specified for the artifact is not valid or the artifact does not exist in the repository.

Action

Provide a valid identifier for the artifact: <id>_<version>.


CCERPRE0011 Command Central cannot find the specified image file at the specified location "{0}".
Action

Make sure the given path and file name are correct.


CCERPRE0012 Repository with name {0} is not found.
Explanation

There is no registered repository with the provided name.

Action

Provide a valid name of a registered repository.


CCERPRE0013 Repository image location URI is not valid.
Explanation

The location you provided is empty or not a valid URI.

Action

Ensure the provided location is not empty, does not include white spaces and points to a valid image file.


CCERPRE0014 The specified repository name {0} is not valid.
Explanation

No additional details.

Action

Specify a valid repository name. The name can include up to 100 ASCII characters, numbers, underscore (_), hyphen (-), and period (.).


CCERPRE0015 Image repository archive {0} already exists in the Command Central images location.
Explanation

The repository name must be unique.

Action

Use a new name for the image repository or select the "Image file on Command Central" option when loading the repository.


CCERPRE0016 {0}
Explanation

{1}

Action

{2}


CCERPRE0017 Provide a platform, for which to export artifacts.
Explanation

Providing an platform, for which to export artifacts is required.

Action

Provide a platform, for which to export artifacts.


CCERPRE0018 The selected repository contains artifacts for more than one platform. Provide a platform for which to export artifacts.
Explanation

The selected repository contains artifacts for more than one platform.

Action

Provide a platform for which to export artifacts.


CCESREE0000 Error occurred during retrieving user credentials
Explanation

This error might occur due to the following reasons: - Users attempt to get credentials when the credentials data store is empty; - While setting credentials, the communication with the remote SPM failed; - While deleting credentials, the communication with the remote SPM failed.

Action

Ensure that: - If you are attempting to get the credentials, the credentials data store is not empty. - If you are setting the credentials, the remote SPM is accessible. - If you are deleting the credentials, the remote SPM is accessible.


CCESREE0001 Specify the private key when certificate is used for authentication.
Explanation

The selected authorization method is "certificate", however, the path to the private key is not specified or is invalid.

Action

Specify a valid path to the private key.


CCETEME0000 A job with ID {0} cannot be found.
Explanation

The job with the specified ID may have completed long before this request.

Action

Use the following URI to list all recently completed or runnig jobs: /cce/jobmanager/jobs


CCETEME0001 The remote request encountered a concurrency error.
Explanation

The system could not execute parallel remote requests.

Action

Contact Software AG Global Support.


CCETEME0002 A job with ID {0} did not completed successfully in {1} seconds.
Explanation

The job with the specified ID may require more time to complete.

Action

Use the following URI to list all recently completed or running jobs: /cce/jobmanager/jobs


CCETEME0003 Template metadata cannot be empty.
Explanation

The template metadata is required for creating a template.

Action

Ensure that you have provided metadata for the template. The metadata.Alias and nodeAlias fields are required.


CCETEME0004 Template alias cannot be empty.
Explanation

The template alias is a required attribute of the template metadata.

Action

Specify a value for the template alias attribute.


CCETEME0005 Template nodeAlias cannot be empty.
Explanation

The template nodeAlias is a required attribute of the template metadata.

Action

Specify a value for the nodeAlias attribute.


CCETEME0006 Template options cannot be empty.
Explanation

The template options attribute is required in the template metadata.

Action

Specify at least one option and retry.


CCETEME0007 Error occurred during template creation {0}
Explanation

Creating the template failed with an error.

Action

Check the error logs for more details.


CCETEME0008 Error occurred during template creation on the remote managed node with alias : {0}. Remote task status is {1}
Explanation

Creating a template on the remote managed node with the specified ID failed with an error.

Action

Check the job status.


CCETEME0009 A template with alias: {0} already exists.
Explanation

Another template with the same alias already exists.

Action

To overwrite the existing template, add the OVERWRITE_TEMPLATE option in the template metadata.To create a new template and keep the existing template, change the template alias.


CCETEME0010 Node with alias : {0} does not exist.
Explanation

A managed installation (node) with the specified alias name does not exist.

Action

Specify a valid alias name for an existing installation (node).


CCETEME0011 A problem occured while downloading template with alias {0} on Command Central.
Explanation

Command Central could not create a folder for the template on the file system.

Action

Contact the Command Central Administrator.


CCETEME0012 A template with alias {0} could not be found.
Explanation

Command Central could not find a template with the specified alias.

Action

Check if the specified alias for the template you want to delete is correct.


CCETEME0013 Error occurred while creating a template on the remote managed node with alias: {0}. Remote task status is {1}
Explanation

Creating the template fails with a "Nothing to download on Command Central" error.

Action

See the error logs for the error details.


CCETEME0014 Template with alias {0} was not found.
Explanation

Command Central could not find a template with the specified alias.

Action

Verify that the alias is spelt correctly and that a template with this alias is already created. If the template is not created, execute a create template operation.


CCETEME0015 Template already exists.
Explanation

A template with the specified alias already exists.

Action

Change the alias of the imported template or delete the existing template with the same alias.


CCETEME0016 A problem occured while importing the template.
Explanation

Command Central could not create a folder for the template on the file system.

Action

Contact the Command Central Administrator.


CCETEME0017 Could not import template because a required file was not found.
Explanation

Command Central could not find or access the file from which to import the template.

Action

Contact the Command Central Administrator.


CCETEME0018 Template data is invalid.
Explanation

The provided template data could not be deserialised.

Action

Check if the provided template data is corrupted.


CCETEME0019 Template options cannot be empty.
Explanation

The template options attribute is required in the template metadata.

Action

Specify at least one option and retry.


CCETEME0020 The requested service temporarily not available.
Explanation

The requested service temporarily not available. This may be due to Platform Manager (SPM) being in the process of shutting down or still loading at start up.

Action

Ensure that Platform Manager is running and Installation has ONLINE status.


CCETEME0021 The Platform Manager (SPM) is shut down.
Explanation

The Platform Manager (SPM) is shut down.

Action

Ensure that Platform Manager is running and Installation has ONLINE status


CCETEME0022 Template metadata must be specified.
Explanation

Specify metadata for the template.

Action

Check the input parameters.


CCETEME0023 Node Alias must be specified.
Explanation

The template input parameters must include Node Alias.

Action

Check the input parameters.


CCETEME0024 Repository Id must be specified.
Explanation

The template input parameters must include Repository Id.

Action

Check the input parameters.


CCETEME0025 Repository with Id {0} cannot be found.
Explanation

The template input parameters must include Repository Id of existing Repository.

Action

Check the input parameters.


CCETEME0026 Template metadata in {0} cannot be unmarshalled.
Explanation

The file containing the metadata for the template cannot be read.

Action

Make sure the file exists, can be read and contains valid XML.


CCETEME0027 An error occurred while registering Repository {0} on Node {1}. Check the Server logs for details.
Explanation

The issue might occur because of a problem with the Repository contents.

Action

Check the Server logs for details.


CCETEME0028 Unable to obtain snapshot template job group id for node {0}.
Explanation

Command Central was unable to obtain the snapshot template job group id for a node.

Action

Contact Software AG Global Support.


CCETEME0029 Error during checking remote job status.
Explanation

An error occurred while checking the remote job status.

Action

Check if Platform Manager is running.


CCETMRE0000 Specify template alias, options, and target node.
Explanation

Template alias, target node alias, and options are required parameters for this template.

Action

Specify values for all required parameters.


CCETMRE0001 {0} option is specified but a repository for the option is not specified.
Explanation

A repository for the option is not specified.

Action

Specify a repository for the option. For example, if the option is PRODUCTS, specify a product repository.


CCETMRE0002 The specified repository is not applicable for this option {0}
Explanation

The specified repository is not applicable for the specified option.

Action

Specify a proper repository. For example, if the option is PRODUCTS, specify a product repository.


CCETMRE0003 There is no repository that supports the specified option {0}.
Explanation

The specified option is not supported by the specified repositories. For example, the error occurs if the FIXES option is specified, but the repository for this option does not support fixes.

Action

Specify a proper repository. For example, if the specified option is FIXES, specify a repository that contains fixes.


CCETMRE0004 No suitable option found for {0}.
Explanation

No matching option found for the specified parameter.

Action

Specify a supported template option.


CCETMRE0005 The alias, nodeAlias, and runtimeComponentId parameters are required for generating a composite template.
Explanation

The alias, nodeAlias, and runtimeComponentId parameters are required for generating a composite template.

Action

Provide the required parameters with the generation request data.


CCETMRE0006 Asset repository {0} does not contain any Command Central composite template assets.
Explanation

The specified asset repository does not contain any templates.

Action

Specify the correct repository.


CCETMRE0007 The alias and nodeAlias parameters are required for generating composite template.
Explanation

The alias and nodeAlias parameters are required for generating a composite template.

Action

Provide the required parameters in the generation request.


CCETMRE0008 The database URL, database type, database username, and database password parameters are required for generating a database composite template.
Explanation

The database URL, database type, database username, and database password parameters are required for generating a database composite template.

Action

Provide the required parameters in the generation request.


CCETMRE0009 Configuration and instance options cannot be combined with database option when generating composite template.
Explanation

The configuration and instance options cannot be combined with the database option when generating a composite template.

Action

Provide either the database option or the configuration and instance options for generating a composite template.


CCETMRE0010 Asset repository {0} does not contain any of the specified template names "{1}".
Explanation

The specified template were not found in the asset repository.

Action

Specify valid template names.


CCEWCME0009 Display name cannot be empty.
Explanation

Display name is required.

Action

Provide the display name.


CCEWCME0010 Alias {0} cannot be empty.
Explanation

Environment alias and node alias cannot be empty.

Action

Provide a valid alias name.


CCEWCME0011 {0} cannot exceed {1} characters.
Explanation

The specified field input is incorrect.

Action

Check the error message and provide the correct input to the specified field.


CCEWCME0012 Environment name or alias cannot be {0}.
Explanation

Incorrect environment name/alias provided.

Action

Check the error message and provide the correct input.


CCEWCME0013 {0} alias cannot contain {1} non-ASCII characters.
Explanation

Environment alias cannot contain non-ASCII characters.

Action

Make sure the value of the alias field is correct.


CCEWCME0014 Alias {0} cannot contain spaces.
Explanation

Environment alias cannot contain spaces.

Action

Make sure the value of the alias field is correct.


CCEWCME0015 {0} already exists.
Explanation

The specified node/environment already exists.

Action

Specify a correct node/environment.


CCEWCME0017 Installation name cannot be empty. It must be less than 100 characters.
Explanation

Node name cannot be empty or contain more than 100 characters.

Action

Enter a valid node name.


CCEWCME0018 Alias cannot be empty. It should be no more than 100 characters long. It should not have spaces. Only ASCII characters, numbers, -, _, and . are allowed.
Explanation

The node alias cannot be empty. It should be no more than 100 characters long.

Action

Enter a valid node alias.


CCEWCME0019 Host name cannot be empty. The host name should be between two and 253 characters characters long. Do not use any special characters, except period(.) and minus(-). Do not start or end the host name with a period(.) or minus(-).
Explanation

The host name field cannot be empty.

Action

Provide a valid host name. The host name should be between two and 253 characters characters long. Do not use any special characters, except period(.) and minus(-). Do not start or end the host name with a period(.) or minus(-).


CCEWCME0020 Port number cannot be empty. It must be a positive number.
Explanation

Port number cannot be empty.

Action

Enter a valid port number.


CCEWCME0028 Installation alias {0} already exists. Please provide a different alias for the installation.
Explanation

Installation node already exists.

Action

Provide a different alias for the installation node you want to add.


CCEWCME0039 Null returned while retrieving the configuration types for comparison.
Explanation

This intermittent error occurs while retrieving the configuration types from Platform Manager.

Action

Retry configuration comparison.


CCEWCME0047 Specify a name for the template. No spaces allowed. Use only ASCII characters, numbers, "-", "_", and "."
Explanation

The alias field for the template cannot be empty.

Action

Provide a valid template alias. No spaces allowed. Use only ASCII characters, numbers, "-", "_", and "."


CCEWCME0048 Shared secret cannot be emtpy.
Explanation

The template shared secret cannot be emtpy.

Action

Provide a valid shared secret.


CCEWCME0049 The shared secrets you entered do not match.
Explanation

The shared secrets that you entered do not match.

Action

Re-enter the shared secrets.


CCEWCME0050 Select at least one include option.
Explanation

You cannot clear all include option check boxes.

Action

You must select at least one include option check box.


CCEWCME0051 No license reports were selected for deletion.
Explanation

At least one report must be selected in the view before clicking the delete button.

Action

Select one or more reports and click the delete button.


CCEWCME0053 No repositories configured. Add at least one repository.
Explanation

There are no central repositories configured in Command Central.

Action

Register at least one repository in Command Central.


CCEWCME0069 Specify a name for the repository. No spaces allowed. Use only ASCII characters, numbers, "-", "_", and "."
Explanation

The alias field for the repository cannot be empty.

Action

Provide a valid repository alias. No spaces allowed. Use only ASCII characters, numbers, "-", "_", and "."


CCEWCME0072 Repository {0} creation failed.
Explanation

Creating the repository failed.

Action

Check the server logs or contact your system administrator.


CCEWCME0073 Repository {0} update failed.
Explanation

Updating the specified repository failed.

Action

Check the server logs or contact your system administrator.


CCEWCME0074 Version cannot be empty.
Explanation

The Version field is a required field.

Action

Click the Advanced button and specify a valid server in the Enter server URL field. Leave this field empty to use the Software AG Download Center.


CCEWCME0075 Image file path cannot be empty.
Explanation

The Image file on server field is a required field.

Action

In the Image file on server field, provide a valid path to an image file on the Command Central server.


CCEWCME0076 An image file should be selected.
Explanation

Specifying an image file is required.

Action

In the Upload image file field, select an image file.


CCEWCME0077 A repository with location {0} was not found in the Software AG Download Center.
Explanation

The repository that you are trying to edit was not found in the Software AG Download Center.

Action

Contact your system administrator.


CCEWCME0099 Applying template {0} on installation {1} failed.
Explanation

The apply template operation on the target installation has failed.

Action

Check the logs and jobs on the target installation.


CCEWCME0103 Error while creating a new license report. {0}
Explanation

An error occurred while invoking the service action responsible for creating a new report.

Action

Check the Command Central server logs to determine the root cause for the error.


CCEWCME0104 Error while deleting license report(s). {0}
Explanation

An error occurred while invoking the service action responsible for deleting reports.

Action

Check the Command Central server logs to determine the root cause for the error.


CCEWCME0105 Error while refreshing the license reports view. {0}
Explanation

An error occurred while invoking the service action responsible for retrieving the reports from the Command Central server.

Action

Check the Command Central server logs to determine the root cause for the error.


CCEWCME0114 Saving of template {0} from installation {1} failed.
Explanation

The save template operation on the target installation has failed.

Action

Check the logs and jobs on the target installation.


CCEWCME0119 You do not have enough access privileges to perform requested operation.
Explanation

You do not have enough access privileges to perform requested operation.

Action

Contact your system administrator to help you get the required permissions.


CCEWCME0124 Bootstrapping of Platform Manager on installation with alias {0} failed.
Explanation

The bootstrap Platform Manager operation on the target installation has failed.

Action

Check the logs and jobs on Command Central.


CCEWCME0125 Alias {0} already exists. Provide a unique alias.
Explanation

Alias already exists.

Action

Provide a unique alias for the object you want to add.


CCEWCME0126 Alias cannot be empty. It should not have spaces. Only ASCII characters, numbers, -, _, and . are allowed.
Explanation

Alias cannot be empty.

Action

Enter a valid alias.


CCEWCME0127 No file specified.
Explanation

A valid file must be specified.

Action

Press the 'Browse' button and select a valid file.


CCEWCME0129 Error while deleting license manifest(s). {0}
Explanation

An error occurred while invoking the service action responsible for deleting license manifests.

Action

Check the Command Central server logs to determine the root cause for the error.


CCEWCME0130 Error while refreshing the license manifests view. {0}
Explanation

An error occurred while invoking the service action responsible for retrieving the license manifests from the Command Central server.

Action

Check the Command Central server logs to determine the root cause for the error.


CCEWCME0132 No license manifests were selected for deletion.
Explanation

At least one license manifest must be selected in the view before clicking the delete button.

Action

Select one or more license manifests and click the delete button.


CCEWCME0135 The contents of the specified file has invalid format.
Explanation

The contents of the specified file does not match the required format.

Action

Specify a file with valid format.


CCEWCME0136 Select remote installation method.
Explanation

A remote installation method is not selected in the web user interface.

Action

Select a remote installation method in the web user interface.


CCEWCME0137 Distribution cannot be empty.
Explanation

The Distribution field in the web user interface cannot be empty.

Action

Select a distribution in the Distribution field.


CCEWCME0138 Repository cannot be empty.
Explanation

The Repository field in the web user interface cannot be empty.

Action

Select a repository in the Repository field.


CCEWCME0140 Installation directory cannot be empty.
Explanation

The Installation directory field in the web user interface cannot be empty.

Action

Select an installation directory in the Installation directory field.


CCEWCME0141 Operating System cannot be empty.
Explanation

The Operating System field in the web user interface cannot be empty.

Action

Select an operating System in the Operating System field.


CCEWCME0142 Bootstrapped node {0} startup timed out.
Explanation

The status of the bootstrapped node is still OFFLINE after the required timeout.

Action

Check the Command Central bootstrap logs.


CCEWCME0143 Bootstrap installer creation failed.
Explanation

Bootstrap installer creation failed.

Action

Check the Command Central logs.


CCEWCME0145 User name cannot be empty.
Explanation

The user name field cannot be empty.

Action

Provide a value in the user name field.


CCEWCME0146 Password cannot be empty for the selected authentication method.
Explanation

The Password cannot be empty for the selected authentication method.

Action

Provide a value in the Password field for the selected authentication method.


CCEWCME0147 Key file cannot be empty for the selected authentication method.
Explanation

The Key file field cannot be empty for the selected authentication method.

Action

Provide a value in the Key file field for the selected authentication method.


CCEWCME0148 Password cannot be empty.
Explanation

The Password field cannot be empty.

Action

Provide a value in the Password field.


CCEWCME0149 User name cannot be empty.
Explanation

The user name cannot be empty.

Action

Provide a value in the user name field.


CCEWCME0151 Navigation to the log(s) for node {0} can not be initiated.
Explanation

A node with alias {0} does not exist in the Command Central landscape.

Action

Select an existing node different than {0}.


CCEWCME0152 You do not have access to the requested operation(s).
Explanation

You do not have access to the requested operation(s).

Action

Provide valid credentials to perform the requested operation(s).


CCEWCME0154 Request to create a license report failed.
Explanation

An error occurred during the creation of the license report.

Action

Contact Software AG Global Support.


CCEWCME0155 Select fixes to be installed.
Explanation

No fixes are selected for installation.

Action

Select at least one fix to be installed.


CCEWCME0156 Duplicate fixes selected. Select only one of the fix versions to be installed.
Explanation

Duplicate fixes with the same ID, but different versions were selected.

Action

Select only one of the possible versions.


CCEWCME0157 The key should not be empty.
Explanation

The Support Patch key should not be empty.

Action

Provide a Support Patch key.


CCEWCME0158 The Platform Manager (SPM) on this installation is not online.
Explanation

The selected fix and product installation functions are not supported when Platform Manager is not running.

Action

Start Platform Manager and try again.


CCEWCME0159 Release 9.7 and higher supports fix installation.
Explanation

Fix installation is supported for installations of release 9.7 and higher. See the actions suggested for your installation in the Action field.

Action

Use Software AG Update Manager to install fixes and support patches for this installation. Consider upgrading this installation to 9.10 or a later release, using Command Central.


CCEWCME0162 This installation version ({0}) does not support this feature.
Explanation

The selective fix uninstallation feature is supported beginning with Platform Manager 9.7.

Action

If it is not possible to upgrade the installation to the latest available release version, you should use Update Manager to uninstall fixes.


CCEWCME0163 Select a support patch to be installed.
Explanation

There is no support patch selected for installation.

Action

Select a support patch to install.


CCEWCME0166 Select at least one source repository.
Explanation

You must select at least one source repository from which to create a mirror repository.

Action

Select at least one source repository from which to create a mirror repository.


CCEWCME0167 The provided configuration is not valid.
Explanation

The server request can not be completed successfully.

Action

Expand this view for more details.


CCEWCME0168 No license keys were selected for deletion.
Explanation

You must select at least one license key in the view before clicking the delete button.

Action

Select one or more license keys and click the delete button.


CCEWCME0171 Error while refreshing the license keys view. {0}
Explanation

An error occurred while invoking the service action responsible for retrieving the license keys from the Command Central server.

Action

Check the Command Central server logs to determine the root cause for the error.


CCEWCME0174 Adding/Updating a repository operation failed.
Explanation

Adding a repository operation failed. The job status is Error.

Action

Check the logs and try again.


CCEWCME0175 Error while deleting license key(s). {0}
Explanation

An error occurred while invoking the service action responsible for deleting license keys.

Action

Check the Command Central server logs to determine the root cause for the error.


CCEWCME0183 Invalid username or password.
Explanation

Invalid username or credentials provided in the Command Central Login page.

Action

Provide valid username or credentials in the Command Central Login page.


CCEWCME0184 To create a mirror fix repository, you need at least one product repository that will be used as a filter for the repository content.
Explanation

To create a mirror fix repository, you need at least one product repository that will be used as a filter for the repository content.

Action

Select at least one product repository.


CCEWCME0185 Specify a name that follows the webMethods-<major.version>.<minor.version>_<name> pattern.
Explanation

The pattern allows to extract the version when constructing a bootstrap image for ALL SPM distribution.

Action

Name your product mirror repository after the pattern.


CCEWCME0188 Insufficient permissions to access this resource.
Explanation

You do not have sufficient permissions to access this resource.

Action

Contact your system administrator to get sufficient permissions.


CCEWCME0209 Release 9.8 and higher supports product installation.
Explanation

Product installation is supported for installations of release 9.8 and higher. See the actions suggested for your installation in the Action field.

Action

Use Software AG Installer to install products for this installation. Consider upgrading this installation to 9.10 or a later release, using Command Central.


CCEWCME0210 Release 9.8 and higher supports support patch installation.
Explanation

Support patch installation is supported for installations of release 9.8 and higher. See the actions suggested for your installation in the Action field.

Action

Use Software AG Update Manager to install support patches for this installation. Consider upgrading this installation to 9.10 or a later release, using Command Central.


CCEWCME0214 Enter your user name for the Software AG Download Center.
Explanation

The user name field cannot be epmty.

Action

Enter a valid user name for the Software AG Download Center.


CCEWCME0215 Enter your password for the Software AG Download Center.
Explanation

The password field cannot be epmty.

Action

Enter a valid password for the Software AG Download Center.


CCEWCME0216 Enter your user name for the remote Platform Manager.
Explanation

The user name field cannot be epmty.

Action

Enter a valid user name for the Platform Manager, which is specified in the repository URL.


CCEWCME0217 Enter your password for the remote Platform Manager.
Explanation

The password field cannot be epmty.

Action

Enter a valid password for the Platform Manager, which is specified in the repository URL.


CCEWCME0220 Updating repository contents operation failed.
Explanation

The repository update contents operation failed. The job status is Error.

Action

Check the logs and try again.


CCEWCME0223 Could not transfer the file to the target destination {0}.
Explanation

The file could not be transfered because of an error.

Action

Check if the target host has enough disk space or the specified file name is valid.


CCEWCME0228 You are not allowed to perform the requested operation.
Explanation

You are not allowed to perform the requested operation because of Cross Site Request Prevention.

Action

Ensure that you do not have several Command Central REST resources open in the same browser session. If you do, close all the instances of the browser and log into the Command Central web user interface again.


CCEWCME0239 Source repositories with different versions are selected: {0}.
Explanation

The selected source repositories have different versions.

Action

Select source repositories with the same version.


CCEWCME0240 Connecting to asset repository {0} failed.
Explanation

Connecting to an asset repository failed.

Action

Check the logs and try again.


CCEWCME0243 Asset repository {0} could not be connected/edited.
Explanation

Asset repository {0} could not be connected/edited.

Action

Check if the given repository file path or repository URL and/or credentials are correct and accessible.


CCEWCME0247 [{0}] are not supported for the selected repository.

CCEWCME0252 Import of the composite template failed.
Action

Check the logs and try again.


CCEWCME0255 Failed to export composite template {0}.
Explanation

An error occurred while exporting the composite template.

Action

Check the logs and try again.


CCEWCME0259 Failed to import default composite templates from asset repository {0}.

CCEWCME0260 Name already exists. Specify a unique name for the repository.
Explanation

The specified name is already used for a stored asset repository.

Action

Specify a unique name for the asset repository.


CCEWCMI0021 Installation {0} already exists in environment {1}.
Explanation

The selected node already exists in the environment. Drag and drop not possible.

Action

Verify if you have selected the correct nodes and the environment for drag and drop.


CCEWCMI0040 {0} must be a non-negative integer.
Explanation

Specified field must be a non-negative integer.

Action

Enter a valid field value.


CCEWCMI0041 {0} cannot be empty.
Explanation

Specified field cannot be empty.

Action

Enter a valid field value.


CCEWCMI0046 Alias cannot be empty.
Explanation

The port alias field cannot be empty.

Action

Provide a valid port alias name.


CCEWCMI0057 User credentials saved successfully.
Explanation

The provided user credentials are successfully saved.

Action

None.


CCEWCMI0058 User credentials deleted successfully.
Explanation

The provided user credentials are successfully deleted.

Action

None.


CCEWCMI0098 Template {0} successfully saved from installation {1}.
Explanation

The save template operation completed successfully.

Action

No action required.


CCEWCMI0100 Type a keyword to display only the reports that contain the keyword in the report id, creator, create date or compliance status. The search is case-insensitive.
Explanation

License report search filter help text.

Action

None.


CCEWCMI0101 Do you wish to continue?
Explanation

Part of the license report confirmation dialog for creating a new report.

Action

None.


CCEWCMI0112 license report(s)
Explanation

Part of 'delete license report(s)' confirmation dialog.

Action

None.


CCEWCMI0113 Report Id(s): {0}
Explanation

License report confirmation dialog for deleting one or more reports.

Action

None.


CCEWCMI0115 Template {0} successfully applied on installation {1}.
Explanation

The apply template operation completed successfully.

Action

No action required.


CCEWCMI0117 Scheduled job did not complete within status checker''s allotted time.
Explanation

The client job status checker stopped polling for an executing job's status before it completed. This does not necessarily mean the job did not complete successfully.

Action

Confirm if job completed via other means.


CCEWCMI0120 Attribute {0} successfully submitted.
Explanation

The attribute was successfully added or updated.

Action

No action required.


CCEWCMI0121 Attribute {0} successfully deleted.
Explanation

The attribute was successfully deleted.

Action

No action required.


CCEWCMI0123 Platform Manager successfully bootstrapped on installation with alias {0}.
Explanation

The bootstrap of Platform Manager was successful.

Action

No action required.


CCEWCMI0131 Type a keyword to display only the license manifests that contain the keyword in one of the columns. The search is case-insensitive.
Explanation

License manifest search filter help text.

Action

None.


CCEWCMI0144 Bootstrap installer created successfully.
Explanation

A new bootstrap installer was successfully created.

Action

None.


CCEWCMI0180 No licenses have been registered
Explanation

No license key aliases have been registered so that it is not possible to select a license key alias.

Action

Register a license key alias.


CCEWCMI0186 Provided configuration is valid.
Explanation

The server request is completed successfuly.

Action

Expand this view for more details.


CCEWCMI0248 Select the template you want to delete.

CCEWCMI0249 Confirm deletion of {0} template

CCEWCMI0250 Are you sure you want to delete the template?

CCEWCMI0251 To register a template in Command Central, select either a single template YAML file or a zip archive of the template YAML and supporting files.

CCEWCMI0254 Composite template {0} exported successfully.

CCEWCMI0256 Confirm

CCEWCMI0258 Default composite templates from asset repository {0} have been imported successfully.

CCEWCMI0262 Note that if a layer type definition was created from this template, it will also be deleted.

CCEWCMW0107 No data selected for delete.
Explanation

You must select at least one object for deletion.

Action

Select at least one object from the object list.


CCEWCMW0108 Delete request failed, but no ErrorInfo was found.
Explanation

A problem occurred when executing a delete request, but the server did not provide details about the problem.

Action

Check the server-side log files for details. Contact Software AG Global Support.


CCEWCMW0109 Request to delete license reports failed for these report IDs: {0}
Explanation

The server was not able to delete the license reports identified here. The request may have included other report IDs for which deletion was successful.

Action

Refresh the display of license reports to see which were deleted. Check the server-side error log for details about why the attempt to delete failed.


CCEWCMW0118 Unable to determine job status due to unexpected error while checking status. {0}
Explanation

Job status checking encountered an error. This does not necessarily mean the job did not complete successfully.

Action

Confirm if job completed via other means.


CCEWCMW0122 The provided attribute name {0} already exists.
Explanation

The attribute name which you are trying to add already exists.

Action

Provide a unique attribute name.


CCEWCMW0172 Delete request failed for this alias: {0}
Explanation

The server was not able to delete the object with the given alias.

Action

Check the server-side error log for details about why the attempt to delete failed.


CCEWCMW0187 Provided configuration is valid, but check the warnings.
Explanation

The server request is completed, but check the warnings.

Action

Expand this view for more details.


CCEWCMW0211 Not all products can be installed by Command Central.
Explanation

The number of products that you can install using Command Central increases with each Software AG release.

Action

See the Command Central release readme for a list of products that you cannot install through Command Central for each Software AG release.


CCEWCMW0212 There are artifacts which are either not applicable for the installation or not present in the selected repository.
Explanation

The following artifacts are either not applicable, or not present in the selected repository: {0}

Action

Either continue without the missing artifacts, or use a source repository containing those artifacts.


CCEWCMW0222 User credentials for repository {0} are missing or invalid.
Explanation

The user credentials for repository {0} are missing or invalid.

Action

Specify valid user credentials for repository {0}.


CCEWCMW0257 You cannot close the dialogue at this time, because this will interrupt the job.