WEPRME0001 | The user name must not be null. |
WEPRME0002 | The SQL statement must not be null. |
WEPRME0003 | The temporal validity approach must not be null. |
WEPRME0005 | The class of the user-defined function must not be null. |
WEPRME0007 | The database source builder must not be null. |
WEPRME0008 | Persistency for a database source is currently not supported. |
WEPRME0009 | The class of the database source builder must not be null. |
WEPRME0010 | Persistency for tables is currently not supported. |
WEPRME0011 | The source adapter must not be null. |
WEPRME0012 | The authorization module does not currently support persistency. |
WEPRME0013 | The source adapter class must not be null. |
WEPRME0014 | The subscription mode must not be null. |
WEPRME0015 | The sink adapter must not be null. |
WEPRME0016 | The unsubscription mode must not be null. |
WEPRME0017 | The sink adapter class must not be null. |
WEPRME0018 | The authorization privilege must not be null. |
WEPRME0019 | {0} because the connection has already been closed. |
WEPRME0020 | {0} because the connection has been shut down by the server. |
WEPRME0021 | Unable to close the connection; it has already been shut down by the server. |
WEPRME0022 | The batch job cannot be started because the connection has been already closed. |
WEPRME0023 | The batch job is already active. |
WEPRME0024 | The temporal validity approach {0} requires the use of an instance of SourceAdapter. |
WEPRME0025 | Unsupported approach: {0}. |
WEPRME0026 | The temporal validity approach {0} requires the use of an instance of SinkAdapter. |
WEPRME0027 | The temporal validity approach {0} requires the use of an instance of PnSinkAdapter. |
WEPRME0028 | The temporal validity approach {0} requires the use of a subclass of SourceAdapter. |
WEPRME0029 | The temporal validity approach {0} requires the use of a subclass of PnSourceAdapter. |
WEPRME0030 | The temporal validity approach {0} requires the use of a subclass of SinkAdapter. |
WEPRME0031 | The temporal validity approach {0} requires the use of a subclass of PnSinkAdapter. |
WEPRME0032 | The user {0} does not have the privilege to add the query. |
WEPRME0033 | A user can only add a query to his/her own schema. |
WEPRME0034 | The user {0} does not have the privilege to use the query. |
WEPRME0035 | The user {0} does not have the privilege to add the user-defined function. |
WEPRME0036 | Current system configuration does not support persistency. |
WEPRME0037 | The user {0} does not have the privilege to remove the user-defined function. |
WEPRME0038 | The user {0} does not have the privilege to add the database source. |
WEPRME0039 | The user {0} does not have the privilege to remove the database source. |
WEPRME0040 | The user {0} does not have the privilege to use the database source. |
WEPRME0041 | The user {0} does not have the privilege to add the table. |
WEPRME0042 | The user {0} does not have the privilege to remove the table. |
WEPRME0045 | The user {0} does not have the privilege to remove the query. |
WEPRME0046 | The user {0} does not have the privilege to add the subscription. |
WEPRME0047 | A user can only add a subscription to his/her own schema. |
WEPRME0048 | The user {0} does not have the privilege to remove the subscription. |
WEPRME0049 | The user {0} does not have the privilege to use the subscription. |
WEPRME0050 | The user {0} does not have the privilege to grant the privilege. |
WEPRME0051 | The user {0} does not have the privilege to revoke the privilege. |
WEPRME0052 | The user {0} does not have the privilege to check the privilege. |
WEPRME0053 | The batch job cannot be executed because the connection has been closed. |
WEPRME0054 | The batch job cannot be executed because the connection has been shut down by the server. |
WEPRME0055 | No active batch job to execute. |
WEPRME0056 | The event engine has already been shut down. |
WEPRME0057 | An unexpected interrupt has occurred. |
WEPRME0059 | Calling the push method is not allowed after calling the done method. |
WEPRME0060 | Calling the heartBeat method is not allowed after calling the done method. |
WEPRME0067 | Init must be called before opening the adapter. |
WEPRME0068 | The following command is unknown: {0}. |
WEPRME0069 | The temporal validity approach {0} requires the use of an instance of PnSourceAdapter. |
WEPRME0070 | A user can only add a source to his/her own schema. |
WEPRME0071 | The artefact must not be null. |
WEPRME0072 | The query identifiers cannot be delivered. |
WEPRME0073 | The query cannot be prepared. |
WEPRME0074 | The query cannot be checked. |
WEPRME0075 | The query properties cannot be retrieved. |
WEPRME0076 | The server function cannot be registered. |
WEPRME0077 | The function cannot be deregistered. |
WEPRME0078 | The server data source cannot be registered. |
WEPRME0079 | The data source cannot be deregistered. |
WEPRME0080 | The server table cannot be registered. |
WEPRME0081 | The table cannot be deregistered. |
WEPRME0082 | The source cannot be prepared. |
WEPRME0083 | The query cannot be started. |
WEPRME0084 | The query cannot be stopped. |
WEPRME0085 | The sink cannot be subscribed. |
WEPRME0086 | The sink cannot be unsubscribed. |
WEPRME0087 | The earliest possible subscription time cannot be determined. |
WEPRME0088 | The earliest possible unsubscription time cannot be determined. |
WEPRME0089 | The server sink cannot be subscribed. |
WEPRME0090 | The server sink cannot be unsubscribed. |
WEPRME0091 | The privilege cannot be granted. |
WEPRME0092 | The privilege cannot be revoked. |
WEPRME0093 | The privilege cannot be checked. |
WEPRME0094 | The identifiers cannot be retrieved. |
WEPRME0095 | The registration cannot be checked. |
WEPRME0096 | The query metadata cannot be delivered. |
WEPRME0097 | Version mismatch between client and server. Cannot connect to server version {0} using client version {1}. Use a client version between {2} and {3} instead. Your current client version can only connect to server versions between {4} and {5}. |
WEPRME0098 | Unable to connect to any of the provided servers: {0}. |
WEPRME0099 | This operation is currently not supported in high availability mode. |
WEPRME0100 | The query head cannot be retrieved. |
WEPRME0101 | In high availability mode, this operation is currently only supported using a remote connection. |
WEPRME0102 | The SQL statement contains syntactical errors. |
WEPRME0104 | Unrecognized semantic exception. Please report the SQL statement to your software supplier. |
WEPRME0105 | The {0} argument of the {1} aggregation must be numeric. |
WEPRME0106 | The types of the arguments of the aggregation do not match the required argument types. |
WEPRME0107 | The field {0} is unknown or not visible. |
WEPRME0108 | The argument of the ABS function must be numeric. |
WEPRME0109 | In the case function, the type of the {0} result expression does not match the types of the previous result expressions ({1}, {2}). |
WEPRME0110 | The signature of the user-defined function {0} does not match the specified types ({1}). |
WEPRME0111 | The user-defined function {0} is unknown or not visible. |
WEPRME0112 | The {0} argument of the {1} must be numeric. |
WEPRME0113 | The {0} argument of the {1} must be of character/string type. |
WEPRME0114 | The types of the arguments of the operation do not match the required argument types. |
WEPRME0115 | The arguments of the {0} comparison cannot be compared ({1}, {2}). |
WEPRME0116 | The expression list contains constants of different types. |
WEPRME0117 | The types of the expression and the constants in the expression list cannot be compared ({0}, {1}). |
WEPRME0118 | Only expressions and star selections are permitted in a selection list. |
WEPRME0119 | An aggregate is not allowed inside a WHERE clause. |
WEPRME0120 | Only expressions are permitted in a GROUP BY clause. |
Explanation |
The GROUP BY clause contains an entry that is not an expression. |
Action |
Replace the entry by a valid expression. |
WEPRME0121 | The {0} constant listed in the set condition must have the same size as the specified field list. |
WEPRME0122 | The types of the field and the constants in the constant list cannot be compared ({0}, {1}). |
WEPRME0123 | The source {0} is unknown or not visible. |
WEPRME0124 | The size of a count-based window must be greater than zero. |
Explanation |
The query contains an invalid size. This refers to the ROWS argument in an SQL query, or the size attribute of a window element in an XML query. |
Action |
Specify a valid size. |
WEPRME0125 | The sliding size specification of a count-based window must be greater than zero. |
Explanation |
The query contains an invalid sliding size. This refers to the SLIDE argument in an SQL query, or the increment attribute of a window element in an XML query. |
Action |
Specify a valid sliding size. |
WEPRME0126 | The duration of a time-based window must be greater than zero. |
Explanation |
The query contains an invalid duration. This refers to the RANGE argument in an SQL query, or the size attribute of a window element in an XML query. |
Action |
Specify a valid duration. |
WEPRME0127 | The sliding size specification of a time-based window must be greater than zero. |
Explanation |
The query contains an invalid sliding size. This refers to the SLIDE argument in an SQL query, or the increment attribute of a window element in an XML query. |
Action |
Specify a valid sliding size. |
WEPRME0128 | The DURATION argument of a MATCHING clause must be greater than zero. |
WEPRME0129 | The WITHIN argument of a MATCHING clause must be greater than zero. |
WEPRME0130 | Duplicate definition for the pattern state ''{0}''. |
WEPRME0131 | The DEFINE clause does not define all the pattern states required by the specified pattern. |
WEPRME0132 | The field {0} is already defined by the input query. |
WEPRME0133 | The type of the defined field and the type of its default value do not match ({0}, {1}). |
WEPRME0134 | The type of the defined field and the type of the assigned value do not match ({0}, {1}). |
WEPRME0135 | The field names ''START_TIMESTAMP'' and ''END_TIMESTAMP'' are reserved for additional information provided by pattern matching. |
WEPRME0136 | The identifier for a pattern state must be a single character. |
WEPRME0137 | An aggregate is not allowed inside the condition in an action definition. |
WEPRME0138 | The condition of an action definition must be a predicate. |
WEPRME0139 | An aggregate is not allowed inside an action definition in a MATCHING clause. |
WEPRME0140 | The right-hand side of an action definition must be an expression. |
WEPRME0143 | Only predicates are permitted in the ON clause of a join. |
WEPRME0144 | Only predicates are permitted in a WHERE clause. |
WEPRME0145 | The {0} operation requires identical output format of the involved subqueries. |
WEPRME0146 | Only predicates are permitted in a disjunction. |
WEPRME0147 | Only predicates are permitted in a conjunction. |
WEPRME0148 | Only predicates are permitted in a negation. |
WEPRME0149 | The EXISTS clause is currently not supported. |
WEPRME0150 | An SQL expression list in a relational expression is currently not supported. |
WEPRME0152 | Only an expression is permitted as the first argument of a comparison. |
WEPRME0153 | Only an expression is permitted as the second argument of a comparison. |
WEPRME0154 | Only constants are allowed in the set of an IN clause. |
WEPRME0155 | A subquery in an IN clause is currently not supported. |
WEPRME0156 | Only expressions are permitted as the first argument of a BETWEEN clause. |
WEPRME0157 | Only expressions are permitted as the second argument of a BETWEEN clause. |
WEPRME0158 | The arguments of the BETWEEN clause cannot be compared ({0}, {1}). |
WEPRME0159 | The first argument of the BETWEEN clause is greater than the second argument. |
WEPRME0160 | Only expressions are permitted in the IS NULL clause. |
WEPRME0161 | Only expressions are permitted in {0}. |
WEPRME0162 | Only expressions are permitted in an exponentiation. |
WEPRME0163 | Only expressions are permitted in a unary operation. |
WEPRME0164 | Only expressions are permitted in the WHEN clause of a simple CASE statement. |
WEPRME0165 | Only expressions are permitted in the THEN clause of a simple CASE statement. |
WEPRME0166 | Only expressions are permitted in the ELSE clause of a simple CASE statement. |
WEPRME0167 | Only predicates are permitted in the WHEN clause of a boolean CASE statement. |
WEPRME0168 | Only expressions are permitted in the THEN clause of a boolean CASE statement. |
WEPRME0169 | Only expressions are permitted in the ELSE clause of a boolean CASE statement. |
WEPRME0170 | Duplicate field definition in recursive query. |
WEPRME0171 | The number of defined fields in the recursive query does not match the number of fields in the subquery. |
WEPRME0172 | The defined field name does not match the field name in the subquery. |
WEPRME0173 | The defined field type does not match the field type in the subquery. |
WEPRME0174 | Check the specified aggregation. |
WEPRME0175 | Check the specified SELECT item. |
WEPRME0176 | Check the specified DEFINE condition. |
WEPRME0177 | Check the specified action. |
WEPRME0178 | Check the specified part of the join predicate. |
WEPRME0179 | Check the specified part of the WHERE clause. |
WEPRME0180 | The operator type {0} is currently not allowed within a recursive query. |
WEPRME0181 | The operator type {0} is not allowed within a recursive query. |
WEPRME0182 | The type {0} is unexpected. |
WEPRME0183 | The defined field is not null but the field in the subquery is nullable. |
WEPRME0184 | The input of a window has to be a chronon stream. |
WEPRME0185 | The pattern of a MATCHING clause must not be empty. |
WEPRME0189 | The base time specification does not represent a valid date/time. |
Explanation |
The query contains an invalid base time. This refers to the RELATIVE TO clause in an SQL query, or the relative-to attribute of a window element in an XML query. |
Action |
Specify a valid base time. |
WEPRME0191 | The LIKE clause requires a constant string pattern. |
WEPRME0192 | Only predicates are permitted in a HAVING clause. |
WEPRME0194 | Arrays of type {0} are currently not supported. |
WEPRME0195 | Only expressions of type BOOLEAN are allowed in this context but the present type is {0}. |
WEPRME0196 | The {0} function only supports FLOAT and DOUBLE values as arguments. |
WEPRME0197 | The argument of the CHAR_LENGTH function must be of string type. |
WEPRME0198 | Casting from {0} to {1} is currently not supported. |
WEPRME0199 | The argument of the {0} function must be numeric. |
WEPRME0200 | The {0} argument of the {1} function must be numeric. |
WEPRME0201 | Windows can only be applied to input streams or (sub)queries. |
WEPRME0202 | Tried to configure DataSource with unknown connection type {0} in RTM system. |
WEPRME0203 | Tried to configure unknown database table {0} in RTM system. |
WEPRME0204 | Cannot find builder class for DataSource configured in RTM system. |
WEPRME0205 | Cannot call builder class constructor for DataSource configured in RTM system. |
WEPRME0206 | Cannot access specified database table for DataSource configured in RTM system. |
WEPRME0207 | Initialization of CONNECT right failed. |
WEPRME0208 | Unable to initialize privileges for super user. |
WEPRME0209 | Unable to initialize privileges for monitoring user. |
WEPRME0211 | Unable to initialize privileges for pre-loaded data sources. |
WEPRME0212 | Unable to retrieve localhost name. |
WEPRME0213 | The system is already started. |
WEPRME0214 | Unable to prepare communication servers. |
WEPRME0215 | The user cannot be connected as direct connections to this system are currently not allowed. |
WEPRME0216 | The user cannot be connected as the system is not started. |
WEPRME0217 | The user cannot be connected as the system is already shut down. |
WEPRME0218 | The user cannot be connected as the username is unknown or the password is wrong. |
WEPRME0219 | The user cannot be connected as the connect right is missing. |
WEPRME0220 | The connection cannot be removed from the system as it is unknown. |
WEPRME0221 | The system was already shut down. |
WEPRME0222 | Setting the class loader is only allowed before system start. |
WEPRME0223 | System is not running in high availability mode. |
WEPRME0224 | The system does not allow remote connections. |
WEPRME0225 | Create database allowed only before the system start. |
WEPRME0226 | Drop database allowed only after system is already shut down. |
WEPRME0228 | Unable to send synchronous command. |
WEPRME0229 | Internal error: CallBack of class {0} provided to {1} is not an instance of {2}. |
WEPRME0230 | Status of health check monitor of local system is not OK; shutting down! |
WEPRME0231 | Unexpected exception in HA ServerConnectionHandler. |
WEPRME0232 | Unexpected error occurred when master was driving recovery of slave. |
WEPRME0233 | Unexpected error occurred when handling recovery request from master. |
WEPRME0239 | Exception when aborting connection process. |
WEPRME0240 | Unsupported protocol. |
WEPRME0241 | No handler registered for protocol {0}. |
WEPRME0242 | Handshake failed due to an exception. |
WEPRME0243 | Missing basic properties ({0}) needed to compute composed property. |
WEPRME0246 | Unexpected role {0}. |
WEPRME0247 | Received unknown command {0}. |
WEPRME0248 | The adapter must not be null. |
WEPRME0249 | The query {0} cannot be stopped as it is still in use by a subquery. |
WEPRME0250 | The query {0} cannot be stopped as it is still in use by a subscriber. |
WEPRME0251 | The subscription identifier {0} is already in use for user {1}. |
WEPRME0252 | The approach ({0}) does not match approach of the query ({1}). |
WEPRME0253 | The sink cannot be subscribed as the query {0} has not been started. |
WEPRME0254 | Unable to compute starting point for snapshot-reducible results. |
WEPRME0255 | Unable to start subscription {0} from {1}. |
WEPRME0256 | The connection to all servers has been lost. |
WEPRME0257 | At least one server address has to be provided. |
WEPRME0259 | Unable to connect to {0} due to incompatible server version. |
WEPRME0260 | Authentication with remote system failed. |
WEPRME0261 | Inconsistent high availability mode of servers. |
WEPRME0262 | The source cannot be prepared as the query identifier {0}.{1} is already in use. |
WEPRME0263 | Unable to parse the given SQL statement: {0}. |
WEPRME0264 | Unable to compute property: {0}. |
WEPRME0265 | The query cannot be prepared as the query identifier {0} is already in use. |
WEPRME0266 | The query {0} cannot be started as it is already closed. |
WEPRME0267 | The query {0} cannot be started as it is not yet initialized. |
WEPRME0268 | The mode {0} is not allowed for server subscriptions. |
WEPRME0269 | Persistent server subscriptions are only allowed with start time Long.MIN_VALUE. |
WEPRME0270 | Client subscription may not be unsubscribed using serverUnsubscribe - use unsubscribe. |
WEPRME0271 | Server subscription may not be unsubscribed using unsubscribe - use serverUnsubscribe. |
WEPRME0272 | Unable to stop subscription {0} from {1}. |
WEPRME0273 | A user-defined function factory is already registered for {0}.{1}. |
WEPRME0274 | No user-defined function is registered for {0}.{1}. |
WEPRME0275 | A data source is already registered for {0}.{1}. |
WEPRME0276 | A table is already registered for {0}.{1}. |
WEPRME0277 | No data source is registered for {0}.{1}. |
WEPRME0278 | No table is registered for {0}.{1}. |
WEPRME0279 | Subscription start point may only be computed for running queries. |
WEPRME0280 | The query identifier {0} is unknown. |
WEPRME0281 | Only numeric, string and date/time values can be used with {0} aggregation. |
WEPRME0282 | Only numeric values can be used with {0} aggregation. |
WEPRME0285 | Unknown aggregation type {0}. |
WEPRME0286 | A {0} aggregate must have exactly one sub-expression. |
WEPRME0287 | A {0} aggregate must not have more than one sub-expression. |
WEPRME0288 | Only numeric, string and date/time values can be used with maximum/minimum aggregation. |
WEPRME0289 | Only numeric values can be used with sum aggregation. |
WEPRME0292 | An exception occurred during batch execution. |
WEPRME0293 | Client did not provide valid number of supported stream protocols. |
WEPRME0294 | No stream protocol requested by the client is supported. |
WEPRME0295 | None of the proposed stream protocols is supported by the server. |
WEPRME0296 | The stream protocol requested by the server is not supported. |
WEPRME0297 | An exception occurred while sending a command. |
WEPRME0298 | Registration of new protocol mappings is only allowed before starting. |
WEPRME0299 | Starting may be done only once. |
WEPRME0300 | A yet unknown version. |
WEPRME0301 | An error occurred while parsing {0} and converting it to the target date format. |
WEPRME0302 | Unable to determine own address. |
WEPRME0303 | The protocol {0} requires a serializer for complex {1} which is not available at the server. |
WEPRME0304 | The protocol {0} requires a serializer for complex {1} which is not available at the client. |
WEPRME0305 | Unknown protocol {0}. |
WEPRME0306 | There is no handler registered under identifier {0} for protocol {1}. |
WEPRME0307 | A subscription to query {0} cannot be established as it has been configured to be non-subscribable. |
WEPRME0308 | The query with identifier {0}.{1} is not a connectable source. |
WEPRME0309 | Wrong approach: {0} (expected {1}). |
WEPRME0310 | Unknown command for system operation:{0}. |
WEPRME0311 | Unable to execute lock command on slave. |
WEPRME0312 | Execution of command on slave causes exception. |
WEPRME0313 | Unable to sync command with slave. |
WEPRME0314 | Only the owner of a source may disconnect from it. |
WEPRME0315 | Only the owner of a source may connect to it. |
WEPRME0316 | The dynamic protocol handler could not be connected. |
WEPRME0317 | The dynamic protocol adapter must not be null. |
WEPRME0318 | Master result to slave communicators may only be added before the system is started. |
WEPRME0319 | Unable to grant rights to subscribe to HA difference to user. |
WEPRME0320 | Unable to execute recover command on slave. |
WEPRME0321 | Unable to retrieve health information from master. |
WEPRME0322 | Unable to retrieve health information from client. |
WEPRME0323 | Connection to HA partner system timed out. |
WEPRME0324 | There is already a class {0} bound. |
WEPRME0325 | This callback is already disconnected. |
WEPRME0326 | Unable to store entry of class {0} in repository. |
WEPRME0327 | The repository already contains an artefact of type {0} for {1}.{2}. |
WEPRME0328 | Repository error: the entry to retrieve is unknown. |
WEPRME0329 | Repository error: the entry to remove is unknown. |
WEPRME0330 | Repository error: unknown subscription. |
WEPRME0331 | Repository does not contain an artefact of type {0} with owner {1} and identifier {2} or it might not be accessed. |
WEPRME0332 | Loading repository from database failed. |
WEPRME0333 | Unable to access notification dispatcher of underlying local connection as remote connection is not yet authenticated. |
WEPRME0334 | The user-defined aggregation function must not be null. |
WEPRME0335 | The class of the user-defined aggregation function adapter must not be null. |
WEPRME0337 | The server user-defined aggregation function cannot be registered. |
WEPRME0338 | The user-defined aggregation function cannot be registered. |
WEPRME0339 | The user-defined aggregation function cannot be deregistered. |
WEPRME0340 | The user-defined operator adapter factory must not be null. |
WEPRME0341 | The class of the user-defined operator adapter factory must not be null. |
WEPRME0342 | Persistency for user-defined operators is currently not supported. |
WEPRME0343 | The server user-defined operator cannot be registered. |
WEPRME0344 | The user-defined operator cannot be registered. |
WEPRME0345 | The user-defined operator cannot be deregistered. |
WEPRME0346 | The user {0} does not have the privilege to add the user-defined aggregation function. |
WEPRME0347 | The user {0} does not have the privilege to remove the user-defined aggregation function. |
WEPRME0348 | The user {0} does not have the privilege to add the user-defined operator. |
WEPRME0349 | The user {0} does not have the privilege to remove the user-defined operator. |
WEPRME0350 | An user-defined aggregation function is already registered for {0}.{1}. |
WEPRME0351 | No user-defined aggregation function is registered for {0}.{1}. |
WEPRME0352 | A user-defined operator is already registered for {0}.{1}. |
WEPRME0353 | No user-defined operator is registered for {0}.{1}. |
WEPRME0354 | Only expressions are permitted as argument of {0} functions. |
WEPRME0355 | Only expressions are permitted as {0} argument of {1} functions. |
WEPRME0356 | The connected system does not support the registration of user-defined aggregation functions. |
WEPRME0357 | The connected system does not support the deregistration of user-defined aggregation functions. |
WEPRME0358 | The connected system does not support the registration of user-defined operators. |
WEPRME0359 | The connected system does not support the deregistration of user-defined operators. |
WEPRME0361 | Unable to create instance of {0}. |
WEPRME0367 | The parameter type number {0} of a user-defined operator adapter factory for {1}.{2} must not be null. |
WEPRME0370 | Unable to find class {0}. |
WEPRME0371 | The method name {0} is not unique in class {1}. |
WEPRME0372 | The method {0} is not declared in class {1}. |
WEPRME0373 | Methods using varargs are not supported. |
WEPRME0374 | The method {0} is not static. |
WEPRME0375 | The method {0} is not public. |
WEPRME0376 | The return type {0} of method {1} is not supported. |
WEPRME0377 | The parameter type {0} of method {1} is not supported. |
WEPRME0378 | The method has been called with wrong parameters. |
WEPRME0379 | The method is not accessible. |
WEPRME0380 | The method cannot be invoked. |
WEPRME0381 | Wrong number of parameters. |
WEPRME0383 | Unable to invoke {0}. |
WEPRME0385 | Unable to determine parameter types. |
WEPRME0386 | Unable to determine output metadata. |
WEPRME0387 | Unable to access {0}. |
WEPRME0388 | No such method available: {0}. |
WEPRME0389 | Return type of method {0} must be StreamMetaData. |
WEPRME0390 | Return type of method {0} must be JavaTypes.Type. |
WEPRME0391 | Unable to access constructor. |
WEPRME0392 | No valid constructor available. |
WEPRME0393 | Wrong parameters: use class name and method names. |
WEPRME0394 | The {0} method must have at least two parameters. |
WEPRME0400 | The user-defined operator {0} is unknown or not visible. |
WEPRME0401 | The parameter type {0} must be the same as value parameter type of {1}. |
WEPRME0406 | The statements are not initialized. |
WEPRME0407 | The statements have to be initialized first. |
WEPRME0408 | This statement is not available. |
WEPRME0409 | The operation removeAll is not supported. |
WEPRME0410 | The operation removeAndReturn is currently not supported. |
WEPRME0411 | Elements are already removed by next. |
WEPRME0412 | {0} is not contained. |
WEPRME0413 | Calling the method getMinTimeStamp only supported in ordered remove mode. |
WEPRME0414 | Structure is empty. |
WEPRME0415 | The only supported key is key 0. |
WEPRME0416 | Not possible as heap is consuming. |
WEPRME0417 | Remove is always done. |
WEPRME0418 | The initial list has to be empty. |
WEPRME0419 | The length of the specified byte array does not match the length of the serialized byte array. |
WEPRME0420 | The given text node does not contain a single character. |
WEPRME0421 | The given node cannot be read. |
WEPRME0422 | The end of file has been reached before record metadata could be read completely. |
WEPRME0423 | The number of column names and column types differ. |
WEPRME0424 | The value contains more than one character. |
WEPRME0425 | The value is not in JDBC time escape format or null. |
WEPRME0426 | The value is not in JDBC date escape format or null. |
WEPRME0427 | The character encoding {0} is not supported. |
WEPRME0428 | The class of the serialized object was not found. |
WEPRME0429 | The class used by serialization is invalid. |
WEPRME0430 | The input stream is corrupt. |
WEPRME0431 | The input stream consists of primitive data instead of objects. |
WEPRME0432 | An input/output error has occurred. |
WEPRME0433 | Writing a serializable object to a string failed due to I/O error. |
WEPRME0434 | Writing a serializable object to a string failed due to security problems. |
WEPRME0435 | Writing a serializable object to a string failed due to output stream being null. |
WEPRME0436 | NULL as null code is not allowed. |
WEPRME0437 | The end of file has been reached before record could be read completely. |
WEPRME0438 | The number of values differs from record metadata definition (expecting {0} but found {1}). |
WEPRME0439 | The index referring to the local error array is out of bounds. |
WEPRME0440 | The value for column {0} ({1}) must not be null. |
WEPRME0442 | No error at index {0} in the local error array. |
WEPRME0443 | The length of the specified byte array does not match the length of the serialized double array. |
WEPRME0444 | The length of the specified byte array does not match the length of the serialized long array. |
WEPRME0445 | The class of the object to be read cannot be found ({0}). |
WEPRME0446 | The length of the specified byte array does not match the length of the serialized String array. |
WEPRME0447 | This serializer does not support the restoring of objects. |
WEPRME0448 | Unsupported type code: {0}. |
WEPRME0449 | Unsupported type name: {0}. |
WEPRME0450 | Unsupported type: {0}. |
WEPRME0451 | Types may not be null. |
WEPRME0452 | Unsupported Java type: {0} ({1}). |
WEPRME0453 | Unsupported SQL type: {0}. |
WEPRME0454 | Negative iterator only supported if negative counts are not. |
WEPRME0455 | Call to next while not hasNext. |
WEPRME0456 | The distinctIterator is not supported if negative counts are allowed. |
WEPRME0457 | Queue is empty. |
WEPRME0458 | Pos={0}, size={1}. |
WEPRME0459 | Operation results in negative value. |
WEPRME0460 | Negative value. |
WEPRME0461 | The argument is not an array. |
WEPRME0462 | The argument is not a wrapper array. |
WEPRME0463 | SingleObjectList already contains an object. |
WEPRME0464 | SingleObjectList only supports index 0. |
WEPRME0465 | SingleObjectList already may only contain one object. |
WEPRME0466 | This list is empty. |
WEPRME0467 | SingleObjectList does not support subList. |
WEPRME0468 | A time period with non-constant time unit (day, week, month and year) must not be greater than {0}. |
WEPRME0469 | The size in milliseconds of the time period can only be calculated for constant time periods. |
WEPRME0470 | Composite metadata already contains specified metadata fragment ''{0}''. |
WEPRME0471 | Some metadata fragments cannot be added to composite metadata:{0}. |
WEPRME0472 | Composite metadata does not contain specified metadata ''{0}''. |
WEPRME0473 | User {0} is already subscribed to {1}. |
WEPRME0474 | Identifier {0} is not supported. |
WEPRME0475 | Unable to subscribe to {0} due to failed subscription to dependent metadata: {1}. |
WEPRME0476 | User {0} is not subscribed to {1}. |
WEPRME0477 | Unexpected parameter {0}=>{1}. |
WEPRME0478 | Illegal parameter type! Expected {0}, found {1}. |
WEPRME0479 | Missing parameter(s): {0}. |
WEPRME0480 | Double metadata update - this should not appear in current update mechanism. |
WEPRME0481 | Transparent composite metadata does not contain specified metadata ''{0}'' as a direct fragment, hence it cannot be removed. |
WEPRME0482 | Requested point is not part of the domain. |
WEPRME0483 | Empty domain. |
WEPRME0484 | New domain ({0},{1}) has to be contained in old one ({2},{3}). |
WEPRME0485 | Range out of domain. |
WEPRME0486 | From==to but fromFactor != toFactor. |
WEPRME0487 | New domain has to be contained in old one. |
WEPRME0488 | Bound out of domain. |
WEPRME0489 | A weight has to be given for each function. |
WEPRME0490 | Functions do not have a common domain. |
WEPRME0491 | Parse error at position {0}, cause: {1}. |
WEPRME0492 | Syntax not supported. |
WEPRME0493 | Unexpected end of regular expression. |
WEPRME0494 | Missing number in count expression. |
WEPRME0495 | Non-digit in count expression. |
WEPRME0496 | Empty (sub) expression. |
WEPRME0497 | Range error. |
WEPRME0498 | Count value is 0. |
WEPRME0499 | Right parenthesis without matching left parenthesis. |
WEPRME0500 | Left parenthesis without matching right parenthesis. |
WEPRME0501 | Negative call on empty state. |
WEPRME0502 | Wrong number of parameters. |
WEPRME0503 | Empty state. |
WEPRME0504 | The switch function does not contain a function for the given identifier and no default function is specified. |
WEPRME0505 | Too many parameters fixed. |
WEPRME0506 | Inconsistent length of arguments. |
WEPRME0507 | Indices have to be in ascending order. |
WEPRME0508 | {0} cannot be used as result type for conversion. |
WEPRME0509 | This UserDefinedOperator has too many inputs. Maximum expected: {0}. Found: {1}.{2} |
WEPRME0510 | This UserDefinedOperator is missing inputs. Minimum expected: {0}. Found: {1}.{2} |
WEPRME0511 | TableName has to be provided. |
WEPRME0512 | Map has to be provided. |
WEPRME0513 | Error reading file. |
WEPRME0514 | Read line does not match the expected format (check number of rows and row delimiter). |
WEPRME0515 | A method responsible for updating a structure was called in a class which does not support updates. |
WEPRME0516 | ResultSet does not provide row {0}. |
WEPRME0517 | File {0} cannot be written. |
WEPRME0518 | Row names must not be null. |
WEPRME0519 | Error parsing date {0}. |
WEPRME0520 | No update necessary after delete. |
WEPRME0521 | At least one row has to be mapped. |
WEPRME0522 | A required value is missing in the given line. |
WEPRME0523 | Between line {0} and {1} : {2}. |
WEPRME0524 | Line {0} : {1}. |
WEPRME0525 | Number of successful commands must not be negative. |
WEPRME0526 | At least one supported stream protocol has to be provided. |
WEPRME0527 | CreateArray only works for complex array types, not for {0}. |
WEPRME0528 | Unsupported type {0}. |
WEPRME0529 | [This Error replaces a {0} which is not available to the class loader.] {1}. |
WEPRME0530 | [This RuntimeException replaces a {0} which is not available to the class loader.] {1}. |
WEPRME0531 | Unable to serialize Object. |
WEPRME0532 | Unsupported modifier. |
WEPRME0533 | Unable to deserialize Object. |
WEPRME0534 | Channel is already closed! |
WEPRME0535 | The null communication type should not be sent. |
WEPRME0536 | Java serialization is not supported. Use ObjectStreamCommunication if needed. |
WEPRME0537 | Unsupported type {0}. |
WEPRME0538 | Unsupported type. |
WEPRME0539 | Exception while receiving {0}. |
WEPRME0540 | Communication type must not be null. |
WEPRME0541 | Factory parameters must not be null. |
WEPRME0542 | Unable to create server on address other than local address. |
WEPRME0543 | Unable to resolve {0}. |
WEPRME0544 | Unsupported CommunicationType: {0}. |
WEPRME0545 | Could not receive answer as receiving was interrupted. |
WEPRME0546 | Could not receive answer as connection was closed due to an exception. |
WEPRME0547 | Requests must not use ResponseStatus. |
WEPRME0548 | Exception while handling async command ({0}). |
WEPRME0549 | More than one ID is not supported yet. |
WEPRME0550 | No command handler registered for ID {0}. |
WEPRME0551 | Command {0} sent by wrong side of communication. |
WEPRME0552 | Command {0} is asynchronous. |
WEPRME0553 | Command {0} is synchronous. |
WEPRME0554 | Wrong protocol, expected {0} but received unknown protocol ID {1}. |
WEPRME0555 | Wrong protocol, expected {0} but received {1}. |
WEPRME0556 | Wrong magic value for protocol {0}. |
WEPRME0557 | Protocol must not be null. |
WEPRME0558 | Uninitialized composite serializer for {0}. |
WEPRME0559 | Registration not possible after shutdown. |
WEPRME0560 | There is no address registered for handling protocol {0}. |
WEPRME0561 | There is already a handler registered for protocol {0}. |
WEPRME0562 | There is no handler registered for protocol {0}. |
WEPRME0563 | Unable to shut down server at {0}. |
WEPRME0564 | Unable to shut down {0} communication servers. |
WEPRME0565 | Compatibility matrix has to be provided. |
WEPRME0566 | Duplicate ID{0}. |
WEPRME0567 | No request types provided for {0}. |
WEPRME0568 | No respond types provided for {0}. |
WEPRME0569 | Unknown command ID: {0}. |
WEPRME0570 | Missing serializer for complex {0}. |
WEPRME0571 | Parameter has to specify a directory. |
WEPRME0572 | Channel is already closed! |
WEPRME0573 | Unable to read communication server index file {0}. |
WEPRME0574 | Unable to start communication server on directory {0}. |
WEPRME0575 | Unable to create communication server index file {0}. |
WEPRME0576 | The stream protocol requested by the client is not supported. |
WEPRME0577 | The stream protocol {0} requested by the client is not supported. |
WEPRME0578 | Exception while closing streams. |
WEPRME0579 | Unable to accept a new connection in the specified time. |
WEPRME0580 | No server present at {0} . |
WEPRME0581 | File instead of directory found at server address {0}. |
WEPRME0582 | Unknown stream protocol: {0}. |
WEPRME0583 | Unable to connect to {0}. |
WEPRME0584 | Unable to close socket. |
WEPRME0585 | Protocol handler must not be null. |
WEPRME0586 | There was already a handler registered for protocol {0}. |
WEPRME0587 | There was already a handler registered. |
WEPRME0588 | The handler to register does not handle the correct protocol {0}. |
WEPRME0589 | This server does not support protocol type {0}. |
WEPRME0590 | Unable to start communication server on port {0}. |
WEPRME0591 | Unable to close server socket. |
WEPRME0592 | Unable to connect to {0}:{1}. |
WEPRME0593 | Unable to initialize cache. |
WEPRME0594 | Cache already exists but with another end timestamp. |
WEPRME0595 | Unable to remove the specified cache. |
WEPRME0596 | New SerialBlob(..) threw SerialException. |
WEPRME0597 | New SerialBlob(..) threw SQLException. |
WEPRME0598 | Write(Element,Node) needs operator, expression or predicate. |
WEPRME0599 | Node conversion not implemented for type {0} and sub-type {1}. |
WEPRME0600 | Unsupported constant type: {0}. |
WEPRME0601 | Outer semi join. |
WEPRME0602 | Non-constant unit in time shift. |
WEPRME0603 | Expression wrapped by this predicate is not of type BOOLEAN. |
WEPRME0604 | Only expressions can be used as boolean expressions. |
WEPRME0605 | A boolean expression must not have any sub-predicates. |
WEPRME0606 | Argument types cannot be compared with {0}. |
WEPRME0607 | Only expressions can be used as arguments of a comparison predicate. |
WEPRME0608 | Second parameter of LIKE has to be a constant. |
WEPRME0609 | Second parameter of LIKE has to be a String. |
WEPRME0610 | Invalid operator [{0}]. |
WEPRME0611 | A comparison predicate must not have any sub-predicates. |
WEPRME0612 | The comparison predicate's arguments are not comparable. |
WEPRME0613 | Incomparable Java type {0}. |
WEPRME0614 | The state of the logical constant is unknown. |
WEPRME0615 | A logical constant must not have any sub-predicates. |
WEPRME0616 | Unknown logical constant type {0}. |
WEPRME0617 | The logical operation type {0} is currently not supported. |
WEPRME0618 | Illegal member specification. |
WEPRME0619 | Illegal set specification. |
WEPRME0620 | Types of member and set are not comparable. |
WEPRME0621 | Illegal subpredicate. |
WEPRME0622 | Unknown logical operation type {0}. |
WEPRME0623 | Only predicates can be used as child nodes of a logical operation predicate. |
WEPRME0624 | Only operators can be used as sets of an exists predicate. |
WEPRME0625 | Only expressions can be used as expression of an in predicate. |
WEPRME0626 | Only operators can be used as sets of an in predicate. |
WEPRME0627 | A logical (boolean) IN operator must not have any sub-predicates. |
WEPRME0628 | A logical (boolean) IN operator does not yet support subqueries. |
WEPRME0629 | A logical (boolean) NOT must have exactly one sub-predicate. |
WEPRME0630 | A logical (boolean) NOT must not have more than one sub-predicate. |
WEPRME0631 | Unknown logical operation type {0}. |
WEPRME0632 | Unknown aggregation operator mode {0}. |
WEPRME0633 | Only predicates can be used as filter predicate nodes of an aggregation operator. |
WEPRME0634 | Only operators can be used as child nodes of an aggregation operator. |
WEPRME0635 | An aggregation operator must have exactly one input operator. |
WEPRME0636 | An aggregation operator must not have more than one input operator. |
WEPRME0637 | Aggregation is currently not supported within recursive PN queries. |
WEPRME0638 | Unsupported target approach: {0}. |
WEPRME0640 | Unknown aggregation operator mode {0}. |
WEPRME0641 | A distinct operator must have exactly one operator. |
WEPRME0642 | A distinct operator must not have more than one input operator. |
WEPRME0643 | Unknown distinct operator mode {0}. |
WEPRME0644 | Empty enumeration. |
WEPRME0645 | Enumeration contains constants of different types. |
WEPRME0646 | An enumeration operator must not have any input operators. |
WEPRME0647 | An enumeration operator provides a set of constants as subquery-replacement for the use in IN-predicates, hence no active enumeration operators are possible. |
WEPRME0649 | The specified object is not of the expected type; {0}. |
WEPRME0650 | ActionMapFormat.parseActionMap(String) failed. |
WEPRME0651 | Only operators can be used as child nodes of an equivalence operator. |
WEPRME0652 | The chosen query plan (operator at index {0}) does not exist. |
WEPRME0653 | The relational metadata of the operator node''s children does not fit. |
WEPRME0654 | The operator node has no children. |
WEPRME0655 | Only operators can be used as child nodes of an except/minus operator. |
Explanation |
An except/minus operator must have exactly two input operators, which provide the input events for the except operator. The except/minus operator returns all events of the first input stream that are not in the second input stream. This means that only the events that are different are returned. |
Action |
Connect exactly two operators as input of the except/minus operator. |
WEPRME0656 | An except/minus operator must have exactly two input operators. |
Explanation |
An except/minus operator must have exactly two input operators, which provide the input events for the except operator. The except/minus operator returns all events of the first input stream that are not in the second input stream. This means that only the events that are different are returned. |
Action |
Connect exactly two operators as input of the except/minus operator. |
WEPRME0657 | An except/minus operator must not have more than two input operators. |
Explanation |
An except/minus operator must have exactly two input operators, which provide the input events for the except operator. The except/minus operator returns all events of the first input stream that are not in the second input stream. This means that only the events that are different are returned. |
Action |
Connect exactly two operators as input of the except/minus operator. |
WEPRME0658 | Unknown except/minus operator mode {0}. |
WEPRME0659 | Passive operators does not have chronon stream properties. |
WEPRME0660 | I/O exception occurred during metadata construction: ''{0}''. |
WEPRME0661 | Only column expressions specified by a single column name can be used as timestamp columns of a file operator. |
WEPRME0662 | Only operators can be used as child nodes of an output file operator. |
WEPRME0663 | An input-file operator must not have any input operators. |
WEPRME0664 | File not found: {0}. |
WEPRME0665 | Unable to read file header. |
WEPRME0666 | Time information must have a reference timestamp. |
WEPRME0667 | Time information must not have any additional timestamps. |
WEPRME0668 | Unknown file operator mode {0}. |
WEPRME0669 | An output-file operator must have exactly one input operator. |
WEPRME0670 | An output-file operator must not have more than one input operator. |
WEPRME0671 | For storing time intervals the names of the columns storing the start and an end timestamp are required. |
WEPRME0672 | File writing currently unsupported. |
WEPRME0673 | Unknown file operator type {0}. |
WEPRME0674 | Only operators can be used as child nodes of a selection operator. |
WEPRME0675 | A selection operator must have exactly one input operator. |
WEPRME0676 | A selection operator must not have more than one input operator. |
WEPRME0677 | Unknown identity operator mode {0}. |
WEPRME0678 | Only operators can be used as child nodes of an intersection operator. |
WEPRME0679 | An intersect operator must have exactly two input operators. |
WEPRME0680 | An intersect operator must not have more than two input operators. |
WEPRME0681 | Unknown target approach {0}. |
WEPRME0682 | Unknown intersect operator mode {0}. |
WEPRME0683 | Only operators can be used as child nodes of a join operator. |
WEPRME0684 | Only predicates can be used as condition of a theta join operator. |
WEPRME0685 | A join operator must have at least two input operators. |
WEPRME0686 | Implementations of multiway join are currently not supported, i.e., they must be transformed to join plans of binary joins using the query optimizer. |
WEPRME0687 | Implementations of outer joins are currently not supported. |
WEPRME0688 | Implementations of semi joins are currently not supported. |
WEPRME0689 | Implementations of joins between active and passive source are currently not supported. |
WEPRME0690 | Unknown join type {0}. |
WEPRME0693 | Unknown join mode {0}. |
WEPRME0694 | Implementations of natural joins without common attributes between active and passive sources are currently not supported. |
WEPRME0695 | Columns named by {0} cannot be unified because of different types. |
WEPRME0696 | Column failure. |
WEPRME0697 | Only operators can be used as child nodes of a mapping operator. |
WEPRME0698 | A mapping operator must have exactly one input operator. |
WEPRME0699 | A mapping operator must not have more than one input operator. |
WEPRME0700 | Unknown mapping operator mode {0}. |
WEPRME0701 | Some pattern variables are undefined. |
WEPRME0702 | Only constants can be used as initial values of a matching operator''s MEASURE clause. |
WEPRME0703 | Only columns can be used in a matching operator''s PARTITION BY part. |
WEPRME0704 | Only predicates can be used in the AS part of a matching operator''s DEFINE clause. |
WEPRME0705 | Only columns can be used on the left side of a DO part of a matching operator''s DEFINE clause. |
WEPRME0706 | Only expressions can be used on the right side of a DO part of a matching operator''s DEFINE clause. |
WEPRME0707 | Only operators can be used as child nodes of a matching operator. |
WEPRME0708 | A pattern matcher must have exactly one input operator. |
WEPRME0709 | A pattern matcher must have a synthetic input representing the underlying NFA''s state. |
WEPRME0710 | A pattern matcher must not have more than two input operators. |
WEPRME0712 | {0} mode not supported. |
WEPRME0713 | Unknown selection operator mode {0}. |
WEPRME0714 | The relational metadata of the operator node''s children does not fit. |
WEPRME0715 | The operator node has no children. |
WEPRME0716 | Only operators can be used as child nodes of a projection operator. |
WEPRME0717 | A projection operator must have exactly one input operator. |
WEPRME0718 | A projection operator must not have more than one input operator. |
WEPRME0719 | Unknown projection operator mode {0}. |
WEPRME0720 | Unsupported data type. |
WEPRME0721 | A random operator must not have any input operators. |
WEPRME0722 | Random sources are currently not supported for target approach: {0}. |
WEPRME0723 | Unknown random operator mode {0}. |
WEPRME0724 | Unknown content. |
WEPRME0725 | Ambiguous content. |
WEPRME0726 | Only operators can be used as child nodes of a recursion operator. |
WEPRME0727 | A recursion operator must have exactly one input operator. |
WEPRME0728 | A recursion operator must not have more than one input operator. |
WEPRME0729 | The use of recursion operators inside the cursor algebra is currently not supported. |
WEPRME0730 | Unknown recursion operator mode {0}. |
WEPRME0731 | Only operators can be used as child nodes of a renaming operator. |
WEPRME0732 | A renaming operator must have exactly one input operator. |
WEPRME0733 | A renaming operator must not have more than one input operator. |
WEPRME0734 | Unknown renaming operator mode {0}. |
WEPRME0735 | A repository entry operator must not have any input operators. |
WEPRME0736 | A repository entry operator with name {0} for user {1} is unknown. |
WEPRME0737 | A subquery using the approach {0} cannot be used in a query compiled for the approach {1}. |
WEPRME0738 | Only predicates can be used as condition of a selection operator. |
WEPRME0739 | Only operators can be used as child nodes of a selection operator. |
WEPRME0740 | A selection operator must have exactly one input operator. |
WEPRME0741 | A selection operator must not have more than one input operator. |
WEPRME0742 | Unknown selection operator mode {0}. |
WEPRME0743 | No value columns specified. |
WEPRME0744 | Wrong number of fields in value {0} (expected {1}, found {2}). |
WEPRME0745 | For exact matches exactly one count argument must be specified. |
WEPRME0746 | For maximum matches exactly one count argument must be specified. |
WEPRME0747 | For minimum matches exactly one count argument must be specified. |
WEPRME0748 | For range matches exactly two count arguments must be specified. |
WEPRME0749 | Only operators can be used as child nodes of a set operator. |
WEPRME0750 | A set operator must have exactly one input operator. |
WEPRME0751 | A set operator must not have more than one input operator. |
WEPRME0752 | The defined field list and the specified values are not comparable. |
WEPRME0753 | Unknown mode {0}. |
WEPRME0755 | Unknown selection operator mode {0}. |
WEPRME0756 | Only operators can be used as child nodes of an output socket operator. |
WEPRME0757 | A input-socket operator must not have any input operators. |
WEPRME0758 | At this point a source reading its data from a socket channel to {0}@{1}:{2} should be returned. |
WEPRME0759 | An output-socket operator must have exactly one input operator. |
WEPRME0760 | An output-socket operator must not have more than one input operator. |
WEPRME0761 | At this point a sink writing the data received from {0} to a socket channel available at {1}@{2}:{3} should be returned. |
WEPRME0762 | Unknown socket type {0}. |
WEPRME0763 | The use of sockets inside the cursor algebra is currently not supported. |
WEPRME0764 | Unknown socket operator mode {0}. |
WEPRME0765 | Local metadata fragment identified by {0} cannot be created because of multiple fields matching the field name pattern. |
WEPRME0766 | Local metadata fragment identified by {0} cannot be created because no available field matches the field name pattern. |
WEPRME0767 | This exception is thrown to avoid the creation of a new metadata fragment. |
WEPRME0768 | Initialization is only available for source operators. |
WEPRME0769 | Recursive query not contained. |
WEPRME0770 | Source operators are internally used for identifying data sources, hence the occurrence of this exception is a signal of a misuse of a source operator. |
WEPRME0771 | Only operators can be used as child nodes of a stream operator. |
WEPRME0772 | A stream operator must have exactly one input operator. |
WEPRME0773 | A stream operator must not have more than one input operator. |
WEPRME0774 | The use of stream operators inside the pipes algebra is currently not supported. |
WEPRME0775 | The target of a stream operator is to transform a passive query into an active one, hence no passive stream operators are possible. |
WEPRME0776 | Unknown stream operator mode {0}. |
WEPRME0777 | Only operators can be used as child nodes of a time shift. |
WEPRME0778 | A time shifter must have exactly one input operator. |
WEPRME0779 | A time shifter must not have more than one input operator. |
WEPRME0780 | A time shifter must have a constant time shift. |
WEPRME0781 | Unknown selection operator mode {0}. |
WEPRME0782 | {0} mode not supported. |
WEPRME0783 | Only operators can be used as child nodes of an union operator. |
WEPRME0784 | A union operator must have at least two input operators. |
WEPRME0785 | A union operator must have at least two input operators. |
WEPRME0786 | Unknown union operator mode {0}. |
WEPRME0787 | Only an operator can be used as child node of a window operator. |
WEPRME0788 | A window operator must have exactly one input operator. |
WEPRME0789 | A window operator must not have more than one input operator. |
WEPRME0790 | A window operator on a non-chronon stream is currently not supported. |
WEPRME0791 | Unknown window operator type {0}. |
WEPRME0792 | The use of a window operator inside the cursor algebra is currently not supported. |
WEPRME0793 | Unknown window operator mode: {0}. |
WEPRME0794 | Only expressions can be used as child nodes of an aggregate expression. |
WEPRME0796 | User-defined aggregation function does not support PN approach. |
WEPRME0797 | A constant expression must not have any sub-expressions. |
WEPRME0798 | Local metadata fragment identified by {0} cannot be created. |
WEPRME0799 | Local metadata fragment identified by {0} cannot be created because of multiple fields matching the field name pattern. |
WEPRME0800 | Local metadata fragment identified by {0} cannot be created because no available field matches the field name pattern. |
WEPRME0801 | A column expression must not have any sub-expressions. |
WEPRME0802 | Unable to identify field {0}. |
WEPRME0803 | Only numeric values can be used with ABS function. |
WEPRME0804 | The decimal place parameter has to be of type Integer. |
WEPRME0805 | Illegal condition. |
WEPRME0806 | Case does not provide FieldMetaData. |
WEPRME0807 | Inconsistent types in case. |
WEPRME0810 | Only String values can be used with CHAR_LENGTH function. |
WEPRME0811 | Casting from {0} to {1} is currently not supported. |
WEPRME0812 | Unknown function type {0}. |
WEPRME0813 | Only expressions can be used as child nodes of a function expression. |
WEPRME0814 | Initialization is only available for user-defined functions. |
WEPRME0815 | A {0} operation must have exactly two sub-expressions. |
WEPRME0816 | A {0} operation must not have more than two sub-expressions. |
WEPRME0817 | Only numeric values can be used with ABS function. |
WEPRME0818 | FLOOR function only supports Double and Float values. |
WEPRME0819 | CEILING function only supports Double and Float values. |
WEPRME0820 | The result type of a CHAR_LENGTH function has to be Integer. |
WEPRME0821 | ROUND function only supports numeric values. |
WEPRME0822 | TRUNCATE function only supports numeric values. |
WEPRME0823 | Currently casting between these types is not allowed. |
WEPRME0824 | Currently only casting between numeric types and casting to String type is supported. |
WEPRME0825 | A {0} function must not have any sub-expressions. |
WEPRME0826 | Unexpected undefined case. |
WEPRME0827 | Parameters missing for user-defined function {0}. |
WEPRME0828 | Too many parameters for user-defined function {0}. |
WEPRME0829 | Unknown function expression type {0}. |
WEPRME0830 | Only numeric values can be negated. |
WEPRME0831 | Only numeric values can be mathematically subsumed. |
WEPRME0832 | Exponentiation with base type {0} is only allowed for exponent types {1}, {2} and {3}. |
WEPRME0833 | Exponent type cannot be {0}. |
WEPRME0834 | Only textual values can be concatenated. |
WEPRME0835 | Unknown operation type {0}. |
WEPRME0836 | Recognized a numeric constant without a numeric data type. |
WEPRME0837 | Only expressions can be used as child nodes of an operation expression. |
WEPRME0838 | A {0} operation must have exactly one sub-expression. |
WEPRME0839 | A {0} operation must not have more than one sub-expression. |
WEPRME0840 | A {0} operation must have exactly two sub-expressions. |
WEPRME0841 | A {0} operation must not have more than two sub-expressions. |
WEPRME0842 | Unknown operation expression type {0}. |
WEPRME0843 | Only numeric values can be negated. |
WEPRME0844 | Only numeric values can be mathematically subsumed. |
WEPRME0845 | Unknown operation expression type {0}. |
WEPRME0847 | Only expressions can be used as child nodes of a renamed field expression. |
WEPRME0848 | A renamed field expression must have exactly one sub-expression. |
WEPRME0849 | A renamed field expression must not have more than one sub-expression. |
WEPRME0850 | Child at index {0} cannot be accessed because the given index is not assigned so far. |
WEPRME0851 | Index {0} cannot be accessed ({1} children are allowed). |
WEPRME0852 | Index {0} cannot be accessed ({1} parents are allowed). |
WEPRME0853 | New child has reached its maximum number of parents (number of allowed parents: {0}). |
WEPRME0854 | New parent has reached its maximum number of children (number of allowed children: {0}). |
WEPRME0855 | Node has reached its maximum number of children (number of allowed children: {0}). |
WEPRME0856 | Node has reached its maximum number of parents (number of allowed parents: {0}). |
WEPRME0857 | Only use this method on nodes without a fixed number of children. |
WEPRME0858 | Only use this method on nodes without a fixed number of parents. |
WEPRME0859 | Parent at index {0} cannot be accessed because the given index is not assigned so far. |
WEPRME0860 | A node of the specified iteration cannot be added to the given node''s global metadata because it does not hold the specified precondition. |
WEPRME0861 | This exception is thrown to avoid the creation of a new metadata fragment after resetting. |
WEPRME0862 | Not contained. |
WEPRME0863 | Entry already contained. |
WEPRME0864 | Entry not contained. |
WEPRME0865 | SpeedUp <0 is not allowed. |
WEPRME0866 | Unsupported SQL data type. |
WEPRME0867 | Period has to be equal to or greater than 0. |
WEPRME0868 | This period worker thread cannot be woken up, because wait time is zero. |
WEPRME0869 | For this factory, getSignature() may not be called with instantiation parameter types as the adapter is already instantiated. |
WEPRME0870 | For this factory, createInstance() may not be called with instantiation parameters as the adapter is already instantiated. |
WEPRME0872 | Class not found. |
WEPRME0873 | The function adapter class for the user-defined function must not be null. |
WEPRME0877 | Unable to create instance of {0}. |
WEPRME0878 | {0} does not provide a constructor with signature String[], which is obligatory. |
WEPRME0884 | Query already reconstructed. |
WEPRME0885 | Could not instantiate adapter class of sink adapter. |
WEPRME0886 | The {0} already exists in the database. |
WEPRME0887 | The removal of {0} from the database failed. |
WEPRME0889 | Repository error: The query graph to be sorted must have at least one node without an input. |
WEPRME0890 | The input queries differ from the sorted output queries. |
WEPRME0891 | Query properties may only be retrieved after the query is built. |
WEPRME0892 | Unsupported approach. |
WEPRME0893 | Could not instantiate adapter class of source adapter. |
WEPRME0896 | Unable to access class {0}. |
WEPRME0897 | Unable to create instance of {0}. |
WEPRME0898 | Update in the database failed. |
WEPRME0899 | The given SQL statement {0} does not provide streaming data. |
WEPRME0900 | Unable to parse the given SQL statement: {0}. |
WEPRME0901 | Unable to translate the given SQL statement ({0}): {1}. |
WEPRME0902 | Unable to translate the given SQL statement (problem with at least one specified column name): {0}. |
WEPRME0903 | Configuration could not been loaded, check XML config URL. |
WEPRME0904 | Could not locate resource! |
WEPRME0905 | Provided class not found! |
WEPRME0906 | Unable to read configuration file. |
WEPRME0907 | XML parsing problem. |
WEPRME0908 | BOT failed. |
WEPRME0909 | Check whether the persistent ID of the object is null! |
WEPRME0910 | COMMIT failed. |
WEPRME0911 | Initializing transaction failed. |
WEPRME0912 | Obtaining entity manager failed. |
WEPRME0913 | Persistence factory shutdown failed. |
WEPRME0914 | ROLLBACK failed. |
WEPRME0915 | The removal of {0} query from the database failed. |
WEPRME0916 | The saving of {0} to the database failed. |
WEPRME0918 | Unknown approach. |
WEPRME0920 | Unsupported approach {0}. |
WEPRME0921 | Unable to access database with given data source specification. |
WEPRME0923 | Unable to access database with given data source and table specification. |
WEPRME0924 | Unable to reconstruct refresh time. |
WEPRME0925 | Please provide connection URL property ''rtmsystem.datasource.connection_url'' in order to connect to database. |
WEPRME0926 | Please provide JDBC driver name property ''rtmsystem.datasource.jdbc_drivername'' in order to initalize the data source. |
WEPRME0927 | Problem with basic data source configuration. |
WEPRME0928 | Problem with JDBC driver, please verify that the library is attached, library classpath is correct and driver name is correct. |
WEPRME0929 | The classpath of the JDBC driver is malformed. |
WEPRME0930 | Obtaining Connection to JDBC Source {0} has failed! |
WEPRME0931 | This method is not supported by this version. |
WEPRME0932 | Could not instantiate builder class of ServerDataSourceEntry. |
WEPRME0933 | Load of tables failed! |
WEPRME0934 | The builder class for the data source must not be null. |
WEPRME0938 | Illegal HA state - slaves ({0}) are already locked before starting command execution. |
WEPRME0939 | Setting the remote ID is only allowed if the local connection is a remote stub. |
WEPRME0940 | Using High Availability, commands may only be given to the master. |
WEPRME0941 | An unexpected exception occurred while executing a remote command from the client. |
WEPRME0942 | No async commands supported yet. |
WEPRME0943 | No sync commands expected by {0}. |
WEPRME0944 | Only master can deliver list of active servers in HA cluster. |
WEPRME0945 | Only the master may broadcast update of cluster topology. |
WEPRME0946 | Remote connection handler is already removed or unknown. |
WEPRME0947 | Sink currently does not have to handle any commands. |
WEPRME0948 | System already shut down. |
WEPRME0949 | The class {0} cannot be instantiated on the server. |
WEPRME0950 | The system is already shut down. |
WEPRME0951 | This API is only to be used in HA mode. |
WEPRME0952 | Unable to close channel {0}. |
WEPRME0953 | Unexpected command {0}. |
WEPRME0954 | Unexpected command: {0}. |
WEPRME0955 | Unknown command: {0}. |
WEPRME0956 | Unsupported approach. |
WEPRME0957 | An exception occurred while connecting. |
WEPRME0959 | Connection to server has been lost. |
WEPRME0960 | Slave trying to initialize metadata after master failed to do so. |
WEPRME0961 | Unexpected approach {0}. |
WEPRME0962 | {0} does not provide a constructor with signature String[], which is obligatory when passing a non-empty String array with parameters. |
WEPRME0963 | Builder class constructor not usable. |
WEPRME0964 | Builder class for DataSource not found. |
WEPRME0965 | Builder properties should contain at least one property e.g. connection URL. |
WEPRME0966 | Check if the schema file available. |
WEPRME0967 | Specified database table cannot be accessed. |
WEPRME0968 | System could not be configured, check XML config URL. |
WEPRME0969 | Unable to configure JPA Provider. |
WEPRME0970 | Unable to read configuration file. |
WEPRME0971 | Unable to read configuration file. |
WEPRME0972 | Unable to validate configuration file. |
WEPRME0973 | Unknown connection type purpose {0}. |
WEPRME0974 | Unknown database table {0}. |
WEPRME0975 | Unknown LoginModuleControlFlag: {0}. |
WEPRME0976 | Provided resource name is null! |
WEPRME0977 | Resource could not be located, please verify resource name ({0})! |
WEPRME0978 | Inconsistent stream metadata. |
WEPRME0979 | Unable to connect communication client. |
WEPRME0980 | Unable to connect due to incompatible protocols. |
WEPRME0981 | Unknown command. |
WEPRME0982 | Unsupported appraoch {0}. |
WEPRME0983 | Wrong command for being handled here: {0}. |
WEPRME0984 | Connection lost while not expecting a valid connection. |
WEPRME0985 | Disaster case, as other server has role {0}. |
WEPRME0986 | Inconsistent number of master result to slave communicators. |
WEPRME0987 | Master result to slave communicator which claims to support punctuations does not. |
WEPRME0988 | Multiple high availability partners are registered in cluster status ({0}). |
WEPRME0989 | No connection to slave which should be recovered. |
WEPRME0990 | No responsible master result sender found for query {0}.{1}. |
WEPRME0991 | Only the master can provide a list of active slaves. |
WEPRME0992 | Other server in unexpected role {0}. |
WEPRME0993 | PN approach currently not supported here. |
WEPRME0994 | Setting the cluster status provider is only allowed before start of high availability! |
WEPRME0995 | Setting the health check provider is only allowed before start of high availability! |
WEPRME0996 | Setting the system shutdown manager is only allowed before start of high availability! |
WEPRME0997 | Status of health check monitor of local system is not OK; shutting down! |
WEPRME0998 | Unable to connect to high availiability partner due to incompatible versions. |
WEPRME0999 | Unable to create client connection handler because cluster status provider is not yet set. |
WEPRME1000 | Unable to do handshake with HA partner. |
WEPRME1001 | Unable to grant all artefact privileges to HA user. |
WEPRME1002 | Unable to initialize master mode because the cluster''s master lock could not be acquired. |
WEPRME1003 | Unable to request communication parameters of master. |
WEPRME1004 | Unable to request role of HA partner. |
WEPRME1005 | Unable to retrieve high availability partner from cluster status. |
WEPRME1006 | Unable to shut down HA communication client of master. |
WEPRME1007 | Unable to take over master mode because the cluster''s master lock could not be acquired. |
WEPRME1008 | Unsupported approach: {0}. |
WEPRME1009 | The specified HA server address {0} is not yet registered. |
WEPRME1010 | This command should not be used by the HA protocol. |
WEPRME1012 | No sync commands expected. |
WEPRME1013 | Break-off of input stream must only occur on input 1. |
WEPRME1014 | Action must not be null. |
WEPRME1015 | Add privilege on concrete and already existing artefact makes no sense. |
WEPRME1016 | Artefact must not be null. |
WEPRME1017 | Identifier must not be null. |
WEPRME1018 | Null argument. |
WEPRME1019 | Owner must not be null. |
WEPRME1020 | Wrong privilege type. |
WEPRME1021 | Grants load failed. |
WEPRME1022 | Grants remove failed. |
WEPRME1023 | No actual artefact known. |
WEPRME1024 | Privilege {0} for user {1} granted by {2} not found. |
WEPRME1025 | Privilege {0} for user {1} not found. |
WEPRME1026 | Privilege cannot be persistent as the referenced artefact is not persistent. |
WEPRME1027 | The user {0} does not have the privilege {1}. |
WEPRME1028 | The user {0} does not have the privilege to grant the privilege {1}. |
WEPRME1029 | Privilege must not be null. |
WEPRME1030 | The delete failed. |
WEPRME1031 | The granted privilege to be serialized has no grants specified. |
WEPRME1032 | The remove of granter {0} to the database failed. |
WEPRME1033 | The saving of granter {0} to the database failed. |
WEPRME1034 | User must not be null. |
WEPRME1035 | Unsupported privilege type in serialization. |
WEPRME1036 | Unsupported privilege type. |
WEPRME1037 | Wrong privilege type. |
WEPRME1038 | Granting privileges is not supported by this authorization module. |
WEPRME1039 | Persistence is not supported by this authorization module. |
WEPRME1040 | Revoking privileges is not supported by this authorization module. |
WEPRME1041 | Check argument, xmlConfig path is wrong, file could not be located. |
WEPRME1042 | Check argument, xmlSchema path is wrong, file could not be located. |
WEPRME1043 | Check arguments, either xmlConfig path or xmlSchema path is wrong, files could not be located. |
WEPRME1044 | Check arguments, either xmlConfig path or xmlSchema were null. |
WEPRME1045 | Clearing the system is only allowed before calling createSystem. |
WEPRME1046 | System could not be configured, check XML config URL. |
WEPRME1047 | Class for schema manager not found. |
WEPRME1048 | Current system configuration does not support persistence. |
WEPRME1049 | No schema manager provided! |
WEPRME1050 | Object of the schema manager cannot be instantiated! |
WEPRME1051 | Only client commands can be sent using this callback. |
WEPRME1052 | Problem with access to class of schema manager. |
WEPRME1053 | Registering protocol handlers is only allowed before system start! |
WEPRME1054 | Registering protocols is only allowed before system start! |
WEPRME1055 | Setting the cache provider is only allowed before system start! |
WEPRME1056 | The protocol handler must not be null. |
WEPRME1057 | The protocol must not be null. |
WEPRME1058 | There is already a protocol handler registered using identifier {0}. |
WEPRME1059 | There is already a protocol registered using identifier {0}. |
WEPRME1060 | Unknown protocol {0}. |
WEPRME1061 | The identifier ''{0}'' is not allowed for a {1}. |
WEPRME1062 | The identifier ''{0}'' is too long (maximum of {1} characters allowed). |
WEPRME1063 | The identifier of type {0} must not be null. |
WEPRME1064 | Unsupported artefact {0}. |
WEPRME1065 | Minimum supported client version must not be greater than maximum one. |
WEPRME1066 | Server must not support older maximum client versions than the previous one. |
WEPRME1067 | Server must not support older minimum client versions than the previous one. |
WEPRME1068 | Server must support clients with same version. |
WEPRME1069 | Server versions have to be provided in ascending order. |
WEPRME1070 | The operator is not processing. |
WEPRME1071 | The timestamps have to be provided in ascending order. |
WEPRME1072 | Sources must not have inputs. |
WEPRME1073 | The method (compute)Done must not be called on sources. |
WEPRME1074 | The method (compute)HeartBeat must not be called on sources. |
WEPRME1075 | The method (compute)Punctuate must not be called on sources. |
WEPRME1076 | The method (compute)Push must not be called on sources. |
WEPRME1077 | No additional outputs allowed. |
WEPRME1078 | A SourceAdapter providing a chronon stream must not use end timestamps other than start timestamp +1. |
WEPRME1079 | The operator is not processing ({0}). |
WEPRME1080 | The timestamps have to be provided in ascending order. |
WEPRME1081 | Source has to have at least one output. |
WEPRME1082 | Extra start time must be smaller than start time. |
WEPRME1083 | No extra work function specified for this source. |
WEPRME1084 | Sequence may not start before the logical start time. |
WEPRME1085 | Sequence produced wrong start timestamp. |
WEPRME1086 | HeartBeatPeriod has to be a divisor of elementPeriod. |
WEPRME1087 | Time {0} already past ({1}). |
WEPRME1088 | The specified label must not be null. |
WEPRME1089 | Lower bound of 1st range does not match with specified minimum. |
WEPRME1090 | Number of ranges and colors differ. |
WEPRME1091 | Upper bound of {0} range does not match with lower bound of {1} range. |
WEPRME1092 | Upper bound of last range does not match with specified maximum. |
WEPRME1093 | Legend for time series number {0} is not specified! |
WEPRME1094 | Sinks may not have outputs. |
WEPRME1095 | An ID has to be provided for each source. |
WEPRME1096 | Unable to provide metadata. |
WEPRME1097 | Illegal input index {0}. |
WEPRME1098 | Input data validity may not overlap more than one day. |
WEPRME1099 | Output already exists. |
WEPRME1100 | Output creation must take place before init. |
WEPRME1101 | Missing negative element for group {0}. |
WEPRME1102 | The length of minimal splits cannot be less than one millisecond. |
WEPRME1103 | An ID has to be provided for each cache input. |
WEPRME1104 | An ID has to be provided for each input. |
WEPRME1105 | Unexpected number of cache inputs! |
WEPRME1106 | Unexpected number of stream inputs! |
WEPRME1107 | Duplicate scope limited heartbeat for input {0}. |
WEPRME1108 | Scope limited heartbeats with different timestamps. |
WEPRME1109 | Window advance <= 0 not allowed. |
WEPRME1110 | Window size <= 0 not allowed. |
WEPRME1111 | Missing negative input elements. |
WEPRME1112 | Not all positive elements matched. |
WEPRME1113 | Negative call on empty state. |
WEPRME1115 | The window advance must not be smaller than or equal to 0. |
WEPRME1116 | Negative element not matching any previous positive one. |
WEPRME1117 | An ID has to be provided for each input. |
WEPRME1118 | Not all positive elements were matched by a negative one. |
WEPRME1119 | Adding status is only allowed before open. |
WEPRME1120 | Additional status elements have to be consecutive. |
WEPRME1121 | The length of minimal splits cannot be less one millisecond. |
WEPRME1125 | Error on both streams ! |
WEPRME1126 | Inconsistent streams. |
WEPRME1127 | No additional outputs allowed. |
WEPRME1128 | Minimum split length <= 0 not allowed. |
WEPRME1129 | Ambiguous next edge. |
WEPRME1130 | Graph has to be packed before sequences can be generated. |
WEPRME1131 | Graph is already packed. |
WEPRME1132 | No node with ID {0}. |
WEPRME1133 | Reserved ID. |
WEPRME1134 | Wrong temporal event order. |
WEPRME1135 | The checked graph has the following errors: {0} |
WEPRME1136 | Duplicate scope limited heartbeat for input {0} (old: {1}, new: {2}). |
WEPRME1137 | Scope limited heartbeats with different timestamps. |
WEPRME1138 | Maximum size must only be given if blockIfFull is set. |
WEPRME1139 | Duplicate scope limited heartbeat for input {0}. |
WEPRME1140 | Start timestamp series is not monotonous. |
WEPRME1141 | Scope limited heartbeat for recursive input {0} was not processed within the whole recursive query plan. |
WEPRME1142 | Scope limited heartbeats are not supported for non-recursive inputs of recursion base. |
WEPRME1143 | The window advance must not be smaller than or equal to 0. |
WEPRME1144 | The window size must not be smaller than or equal to 0. |
WEPRME1145 | Execution has already been assigned. |
WEPRME1146 | Sink has to belong to this graph. |
WEPRME1147 | Source has to belong to this graph. |
WEPRME1148 | No corresponding connection found. |
WEPRME1149 | Punctuation type {0} is not supported by default serializer. |
WEPRME1150 | Data must not be null. |
WEPRME1151 | Invalid element (empty time interval). |
WEPRME1152 | Check internal queue resources/state. |
WEPRME1153 | Operator won''t produce any result in this state: {0}. |
WEPRME1154 | Method must not be called inside a connection''s batch run. |
WEPRME1155 | Input record does not comply with the schema: expected {0}, but received {1}. |
WEPRME1156 | The record size ({0}) of {1} does not comply with metadata {2}. |
WEPRME1157 | The row {0} does not support null values. |
WEPRME1158 | RequiredDatabaseSources must not be null. |
WEPRME1159 | RequiredQueries must not be null. |
WEPRME1160 | RequiredUserDefinedFunctions must not be null. |
WEPRME1161 | Null properties are not allowed. |
WEPRME1162 | Property {0} has to be of type {1}. |
WEPRME1163 | RecordMetaData must not be null. |
WEPRME1164 | Subscriptions must not be null. |
WEPRME1165 | The given notification callback is already registered. |
WEPRME1166 | The given notification callback is not registered. |
WEPRME1167 | A timestamp for each input has to be specified. |
WEPRME1168 | All inputs have to be provided before init. |
WEPRME1169 | An operator may not publish elements in state {0}. |
WEPRME1170 | An operator may not publish punctuations in state {0}. |
WEPRME1171 | Cannot determine periodically updated metadata fragments! Execution is unavailable! |
WEPRME1172 | Cannot determine periodically updated metadata fragments! PeriodicMetaDataUpdateWorkerThread is unavailable! |
WEPRME1173 | Complete from is already set for output ID {0}. |
WEPRME1174 | Complete from must not change (Was {0} for output {1} and tried to change to {2}). |
WEPRME1175 | Graph must not be null! |
WEPRME1176 | Graph Wlock needed. |
WEPRME1177 | Identifier {0} is not supported. |
WEPRME1178 | Illegal Operator State: {0} (State.INITIALIZED or State.PROCESSING expected). |
WEPRME1179 | Index out of bounds. |
WEPRME1180 | Input {0} already set. |
WEPRME1181 | Input {0} not set. |
WEPRME1182 | Input {0} was not set. |
WEPRME1183 | MetaData-object must not be null! |
WEPRME1184 | Minimum heartbeat distance must not be smaller than one. |
WEPRME1185 | Not enough inputs provided. |
WEPRME1186 | Operator already closed. |
WEPRME1187 | Operator already closed. |
WEPRME1188 | Operator is already initialized. |
WEPRME1189 | Operator is already opened. |
WEPRME1190 | Operator is working. |
WEPRME1192 | Operator may not use tellDone method in state {0}. |
Explanation |
The tellDone method of an operator announces to downstream operators that the operator will no longer send events. Calling this method is restricted to certain states of the lifecycle of the operator. |
Action |
Restrict the use of this method to the permitted lifecycle states. |
WEPRME1193 | Operator was already closed. |
WEPRME1194 | Operator was already closed - use reset. |
WEPRME1195 | Output already exists. |
WEPRME1196 | Output already set. |
WEPRME1197 | Output creation must take place before init. |
WEPRME1198 | Output ID out of bounds. |
WEPRME1199 | Output not found. |
WEPRME1200 | Output not set. |
WEPRME1201 | Punctuations of type {0} are not supported by operator {1}. |
WEPRME1202 | Setting complete from for operators with optional inputs is only possible if no inputs present. |
WEPRME1203 | Setting complete from for operators with optional inputs is only possible when initialized. |
WEPRME1204 | Setting complete from is only possible for sources. |
WEPRME1205 | Too many inputs provided. |
WEPRME1206 | Nullary operators have no sources. |
WEPRME1207 | Input not set. |
WEPRME1208 | Unable to read from input. |
WEPRME1209 | From must not be null. |
WEPRME1210 | Unable to close input stream. |
WEPRME1211 | Unable to read file. |
WEPRME1212 | Reset is not supported for a queue while it is consuming. |
WEPRME1213 | Min must not be greater than max. |
WEPRME1214 | Only positive numbers of elements are supported. |
WEPRME1215 | Times must not be negative. |
WEPRME1216 | Right input has to support reset. |
WEPRME1217 | Not enough sources provided. |
WEPRME1218 | Sources not yet provided. |
WEPRME1219 | Wrong input type. |
WEPRME1220 | Cannot determine supportsReset before init. |
WEPRME1221 | No source provided. |
WEPRME1222 | Source not yet provided. |
WEPRME1223 | Wrong input type. |
WEPRME1224 | Initally empty map required. |
WEPRME1225 | This queue is limited. |
WEPRME1226 | Buffer must have a capacity of at least one element. |
WEPRME1227 | No additional run can be obtained before consuming the last one. |
WEPRME1228 | No new cursors can be requested after all previously requested cursors were closed. |
WEPRME1229 | Only one additional cursor supported due to consuming TeeBuffer. |
WEPRME1230 | This is a consuming TeeBuffer. |
WEPRME1231 | This is not a consuming TeeBuffer. |
WEPRME1232 | Iterator is empty. |
WEPRME1233 | Underlying iterator has to support remove. |
WEPRME1234 | Init not allowed after open{0}{1}. |
WEPRME1235 | Iterator is already closed. |
WEPRME1236 | Iterator is already initialized. |
WEPRME1237 | Iterator is already open. |
WEPRME1238 | Iterator is not initialized. |
WEPRME1239 | Iterator was already closed - use reset. |
WEPRME1240 | Iterator was not opened. |
WEPRME1241 | No more elements left. |
WEPRME1242 | Remove is not supported by this iterator. |
WEPRME1243 | Reset is only allowed after open and before close. |
WEPRME1244 | Update may only be used after next(). |
WEPRME1245 | Not all required sources set. |
WEPRME1246 | Operator was already initialized. |
WEPRME1247 | Operators do not supported remove. |
WEPRME1248 | Sources {0} not set. |
WEPRME1249 | Update may only be used after next(). |
WEPRME1250 | Exception during close. |
WEPRME1251 | Exception during init. |
WEPRME1252 | Exception during query processing. |
WEPRME1253 | Unable to handle {0} due to {1}. |
WEPRME1254 | Unknown device. |
WEPRME1255 | Wrong data format: missing header element. |
WEPRME1256 | Wrong data format: missing header end. |
WEPRME1257 | Wrong data format: missing header start. |
WEPRME1258 | Wrong data format: missing packet end. |
WEPRME1259 | Wrong data format: unable to parse parameter. |
WEPRME1260 | Wrong data format: unable to parse parameter count. |
WEPRME1261 | Wrong data format: unable to parse timestamp. |
WEPRME1262 | Wrong data format: wrong number of parameters. |
WEPRME1263 | Wrong data format: wrong parameter format. |
WEPRME1264 | Bytes message cannot be read because of the following reason: {0}. |
WEPRME1265 | Bytes messages do not support reading lines of data. |
WEPRME1266 | Bytes message cannot be written because of the following reason: {0}. |
WEPRME1267 | Connection cannot be created. Check associated properties (e.g. authentication properties)! {0}. |
WEPRME1268 | Connection cannot be listened to because of the following reason: {0}. |
WEPRME1269 | Connection factory cannot be retrieved via JNDI. Check associated ID! {0}. |
WEPRME1270 | Destination cannot be retrieved via JNDI. Check associated ID! {0}. |
WEPRME1271 | JNDI context cannot be created. Check connection properties! {0}. |
WEPRME1272 | Message cannot be sent because of the following reason: {0}. |
WEPRME1273 | Receiver cannot be created because of the following reason: {0}. |
WEPRME1274 | Sender cannot be created because of the following reason: {0}. |
WEPRME1275 | Session cannot be created because of the following reason: {0}. |
WEPRME1276 | Connection cannot be created because of the following reason: {0}. |
WEPRME1277 | Input has to support reset. |
WEPRME1278 | This class must not be reinitialized. |
WEPRME1279 | Unexpected reinitialization. |
WEPRME1280 | Only operators can be used as child nodes of a distinct operator. |
WEPRME1281 | Database sources using direct access cannot be used in user-defined operators. |
WEPRME1282 | Incompatible parameter type for user-defined operator {0} (expected {1}, found {2}). |
WEPRME1283 | Initialization is only available for user-defined operators. |
WEPRME1284 | Input of user-defined operator has unknown mode {0}. |
WEPRME1285 | Inputs of a user-defined operator have to be ordered (first input streams, second database sources). |
WEPRME1286 | Only user-defined operators and sources can be used as child nodes of a user-defined operator (found {0}). |
WEPRME1288 | Unable to compute stream metadata for user-defined operator. |
WEPRME1289 | Unable to retrieve specified source input. |
WEPRME1290 | Unknown user-defined operator mode {0}. |
WEPRME1291 | Wrong number of instantiation parameters for user-defined operator {0} (expected {1}, found {2}). |
WEPRME1292 | List caches cannot be indexed! |
WEPRME1293 | Missing key indices! |
WEPRME1294 | Missing key! |
WEPRME1295 | Unsupported communication type. |
WEPRME1296 | Attempt to inconsistently initialize serializers for complex {0}. |
WEPRME1297 | Wrong serialization initialization - Missing: {0}, unused: {1}. |
WEPRME1298 | Wrong alternative. |
WEPRME1299 | File has to be empty. |
WEPRME1300 | Update ist not permitted. |
WEPRME1301 | Iterator always removes elements. |
WEPRME1302 | Remove is currently not supported. |
WEPRME1303 | Unsupported type code: {0}. |
WEPRME1304 | Unsupported RTM exception type. |
WEPRME1305 | Inputs of an user-defined operator have to be ordered (first input streams, second database sources). |
WEPRME1306 | Only user-defined operators and sources can be used as child nodes of an user-defined operator (found {0}). |
WEPRME1307 | Wrong number of instantiation parameters for user-defined operator {0} (expected {1}, found {2}). |
WEPRME1308 | Incompatible parameter type for user-defined operator {0} (expected {1}, found {2}). |
WEPRME1309 | Input metadata mismatch for user-defined operator {0}. {1} |
WEPRME1310 | Missing inputs for user-defined operator {0}. {1} |
WEPRME1311 | Too may inputs for user-defined operator {0}. {1} |
WEPRME1312 | Unable to use user-defined operator {0}. {1}. |
WEPRME1313 | RequiredUserDefinedOperators must not be null. |
WEPRME1314 | An input stream is to be connected to an operator at index {0}, but the index must not be negative or exceed the maximum allowed number of inputs, which is {1}. |
WEPRME1315 | Inconsistent output stream metadata. |
WEPRME1317 | The entry to insert does not provide the list of required entries. |
WEPRME1318 | A list of required repository entries has to be provided. |
WEPRME1319 | An initialization reason has to be provided. Use other constructor if no reinitialization takes place. |
WEPRME1320 | JPA initialization is only allowed using the parameterless constructor. |
WEPRME1322 | The entry is not yet initialized. |
WEPRME1323 | The timestamps have to be provided in increasing order. |
WEPRME1324 | The end timestamp has to be greater than the start timestamp. |
WEPRME1325 | First snapshot-reducible event has been sent for the following query: Owner: {0} Identifier: {1} Event: {2} |
WEPRME1326 | The entry {0} required by {1} is not in the repository. |
WEPRME1327 | The entry {0} can not be removed as it is still in use. |
WEPRME1328 | The left-hand side of an action must be a field declared in the measure clause. |
WEPRME1335 | This UserDefinedOperator is missing cache inputs. Minimum expected: {0}. Found: {1}.{2} |
WEPRME1336 | This UserDefinedOperator is missing stream inputs. Minimum expected: {0}. Found: {1}.{2} |
WEPRME1337 | This UserDefinedOperator has too many cache inputs. Maximum expected: {0}. Found: {1}.{2} |
WEPRME1338 | This UserDefinedOperator has too many stream inputs. Maximum expected: {0}. Found: {1}.{2} |
WEPRME1340 | Invalid range of exponent. |
WEPRME1341 | Error occurred when evaluating function {0}. {1} |
WEPRME1342 | Error occurred when evaluating operation {0}. {1} |
WEPRME1343 | Cast to {0} is illegal due to precision loss. |
WEPRME1344 | Illegal real exponent for negative base. Integer required. |
WEPRME1345 | Invalid negative exponent for base zero. |
WEPRME1346 | Undefined for x <= 0. |
WEPRME1347 | Undefined for negative values. |
WEPRME1348 | The query {0} cannot be stopped as it is still in use. |
WEPRME1349 | Unexpected problem caused by usage of a subscription. |
WEPRME1350 | The user-defined function {0}.{1} cannot be deregistered as it is still in use. |
WEPRME1351 | The user-defined aggregation function {0}.{1} cannot be deregistered as it is still in use. |
WEPRME1352 | The user-defined operator {0}.{1} cannot be deregistered as it is still in use. |
WEPRME1353 | The data source {0}.{1} cannot be deregistered as it is still in use. |
WEPRME1354 | The table {0}.{1} cannot be deregistered as it is still in use. |
WEPRME1355 | The number of inputs returned by the user-defined operator adapter''s getNumberOfInputs() method ({0}) is not consistent with the the number of inputs the user-defined operator adapter factory is called with ({1}). |
WEPRME1356 | The number of cache inputs returned by the user-defined operator adapter''s getNumberOfInputs() method ({0}) is not consistent with the the number of cache inputs the user-defined operator adapter factory is called with ({1}). |
WEPRME1357 | Division by zero. |
WEPRME1358 | Column ''{0}''not found in metadata object. |
WEPRME1359 | Unexpected number of field metadata entries. Found {0}, expected {1}. |
WEPRME1360 | Objects of type {0} do not match. {1} <> {2}. |
WEPRME1361 | Unexpected number of columns. Found {0}, expected {1}. |
WEPRME1362 | Argument may not be null! |
WEPRME1363 | Column {0} has an unexpected type. Found {1}, expected {2}. |
WEPRME1365 | Column is expected to be nullable: {1}. |
WEPRME1366 | Column is expected to be case sensitive: {0}. |
WEPRME1368 | Parameter is not within range [{0}, {1}]: {2}. |
WEPRME1369 | Stream is expected to be a chronon stream! |
WEPRME1370 | Stream is not expected to be a chronon stream! |
WEPRME1371 | Parameter does not match expected value. Found {0}, expected {1}. |
WEPRME1372 | The address given in config parameter {0} must not be empty. |
WEPRME1373 | The deprecated property {0} is used although the new property {1} is present. |
WEPRME1374 | Wrong number of factory parameters (was {0} but expected {1}). |
WEPRME1375 | Invalid port number: {0}. |
WEPRME1378 | Error evaluating aggregate function {0}. {1} |
WEPRME1379 | Error occurred in method {0}. |
WEPRME1380 | The signature of the user-defined aggregation function {0} does not match the specified types ({1}). |
WEPRME1381 | The user-defined aggregation function {0} is unknown or not visible. |
WEPRME1383 | Error occurred when evaluating function {0}. |
WEPRME1384 | Error occurred when evaluating operation {0}. |
WEPRME1385 | The field {0} is ambiguous. Check if fields and sources are properly renamed and no duplicate aliases are introduced. |
WEPRME1386 | The provided source parameters should not be null. |
Explanation |
The input parameter source parameters is null. A valid source parameters object should be provided. |
WEPRME1387 | The provided server source parameters should not be null. |
Explanation |
The input parameter server source parameters is null. A valid server source parameters object should be provided. |
WEPRME1388 | The provided query parameters should not be null. |
Explanation |
The input parameter query parameters is null. A valid query parameters object should be provided. |
WEPRME1389 | The provided query language should not be null. |
Explanation |
The input parameter query language is null. A valid query language object should be provided. |
WEPRME1390 | The provided query string should not be null. |
Explanation |
The input parameter query string is null. A valid query string object should be provided. |
WEPRME1391 | The command prepareQuery2 is not supported by the server. |
Explanation |
The client tried to send the command prepareQuery2 to the server. The current server version does not support handling of this command. There is a mismatch between client version and server version. |
WEPRME1392 | The query {0} cannot be subscribed to using subscription mode {1} as subscriptions to this query were restricted to times when no element is valid. |
Explanation |
The query was prepared using the query parameter 'isSubscribableOnlyWhenNoElementValid'. Subscriptions to such queries may not use other subscription modes than 'ALL'. |
Action |
Use subscription mode 'ALL'. |
WEPRME1393 | The query {0} can currently not be subscribed to as subscriptions to this query were restricted to times when no element is valid. |
WEPRME1394 | The query {0} cannot be unsubscribed from using subscription mode {1} as subscriptions to this query were restricted to times when no element is valid. |
Explanation |
The query was prepared using the query parameter 'isSubscribableOnlyWhenNoElementValid'. Unsubscriptions to such queries may not use other subscription modes than 'ALL'. |
Action |
Use subscription mode 'ALL'. |
WEPRME1395 | An exception related to {0} occurred in the underlying connection. |
WEPRME1396 | Creation of empty arrays is not supported. |
WEPRME1397 | All values in an array value construction must have the same type. |
WEPRME1398 | Only field expressions can be used as child nodes of an array element reference expression. |
WEPRME1399 | Limiting subscriptions to times when no element is valid is currently not supported in HA mode. |
WEPRME1400 | The field {0} is not of type ARRAY. |
WEPRME1401 | The method {0} is not yet supported in class {1}. |
WEPRME1402 | The XML query is not a valid XML document. |
WEPRME1404 | The XML query contains semantical errors. |
WEPRME1405 | An operator providing a chronon stream must not use end timestamps other than start timestamp +1. |
WEPRME1406 | Unknown timezone: {0}. |
WEPRME1407 | The time unit ''{0}'' is unknown. |
WEPRME1408 | Connection to {0} system lost. |
WEPRME1409 | Client lost connection to server with address {0}. |
WEPRME1425 | The Positive-Negative approach is currently not supported when running in high availability mode. |
WEPRME1427 | NullPointerException occurred while accepting new connection on address {0}. |
WEPRME1428 | CommunicationException occurred while accepting new connection on address {0}. |
WEPRME1429 | Exception occurred while accepting new connection on address {0}. |
WEPRME1431 | The pattern contains illegal characters. Supported characters are letters and the meta characters '*', '+', '?', '.', '|', '(', ')', '[', ']', '^', '{', '}', '' and digits. |
WEPRME1432 | An aggregate is not allowed in this context. |
Explanation |
The query contains an aggregate, but in a context that does not permit aggregates. Aggregates are only allowed in the SELECT and HAVING clauses of an SQL query, or inside an aggregate operator of an XML query. |
Action |
Correct the query and resubmit. |
WEPRME1433 | An Ehcache with the name {0} already exists. |
Explanation |
The system has tried to create a new Ehcache but it already existed in the CacheManager. |
Action |
Make sure the existing Ehcache is removed from the CacheManager. |
WEPRME1434 | Ehcache configuration error: {0}. |
Explanation |
The provided ehcache configuration file is not valid. |
Action |
Make sure the provided ehcache configuration file is valid. |
WEPRME1435 | Problem creating new Ehcache: {0}. |
Explanation |
The system tried to create a new Ehcache but encountered problems. |
Action |
See detailed message for further information. |
WEPRME1436 | Invalid value of join attribute ''{0}''. |
Explanation |
Join attributes refer to the input operators of a join by specifying their 0-based index. They are thus composed of a list of indexes, where only 0 and 1 are valid indexes. As an additional constraint, the list must not contain duplicates. |
Action |
Correct the specified join attribute. |
WEPRME1437 | The child nodes with the UIDs ''{0}'' and ''{1}'' are not equivalent in the equivalence node. |
Explanation |
Two of the child nodes in the equivalence node have different record metadata. All direct children of an equivalence node in a query graph must have the same record metadata (resulting schema). |
Action |
Adapt the equivalence node so that all child nodes have the same record metadata. |
WEPRME1438 | Regular expression is invalid at offset {0}. |
Explanation |
The query contains a PATTERN clause, but its regular expression has invalid syntax. The offset contained in the message is the 0-based offset within the regular expression where the failure was detected. |
Action |
Correct the regular expression syntax and resubmit the query. |
WEPRME1439 | Barrier can only await one single set of connections. |
WEPRME1440 | The connection barrier has not been passed yet. |
WEPRME1441 | Connection for ID {0} could not be used as it connected too late. |
WEPRME1442 | Unexpected incoming recovery connection for ID {0}. |
WEPRME1443 | Duplicate incoming recovery connection for ID {0}. |
WEPRME1444 | Wrong user or password for recovery connection for ID {0}. |
WEPRME1445 | The connection is already authenticated. |
WEPRME1447 | Unable to cast the {0} value {1} to {2}. |
Explanation |
The specified CAST function tries to cast the specified value to the shown type, but this is not possible. |
Action |
Either change the value in a way that it can be casted to the specified type or change the type accordingly. |
WEPRME1449 | Unable to read the given event. |
WEPRME1450 | Unable to write the given event. |
WEPRME1451 | Percentage of delays must be in [0,1]. |
Explanation |
Percentage of delays must be in [0,1]. |
Action |
Configure delay to be in [0,1]. |
WEPRME1452 | Exclusion threshold for delays must be greater than or equal zero. |
Explanation |
Exclusion threshold for delays must be greater than or equal zero. |
Action |
Set exclusion threshold for delays to be greater than or equal zero. |
WEPRME1453 | The weighting factor alpha must be in [0,1]. |
Explanation |
The weighting factor alpha must be in [0,1]. |
Action |
Set the weighting factor alpha to be in [0,1]. |
WEPRME1454 | Size for the queue must be greater 1. |
Explanation |
Size for the queue must be greater 1. |
Action |
Set size for the queue to be greater 1. |
WEPRME1455 | Missing Ehcache configuration. |
Explanation |
The useEhcache query parameter was set, but there was no Ehcache configuration present in the RTM system confuration. |
Action |
Either remove the useEhcache query parameter, or extend the RTM system configuration to include an Ehcache configuration. |
WEPRME1456 | Element must not be null. |
Explanation |
Element must not be null. |
Action |
Insert only elements not being null. |
WEPRME1458 | Only one overload detector can be registered at a time. |
Explanation |
Only one overload detector can be registered at a time. |
Action |
Register only one overload detector. |
WEPRME1459 | The DURATION expression of a MATCHING clause must be evaluable to a numeric type. |
Explanation |
The specified DURATION expression evaluates to a type that is not numeric, e.g., STRING. But DURATION expressions must be numeric. |
Action |
Change the DURATION expression such taht is evaluates to a numeric type. |
WEPRME1460 | The WITHIN expression of a MATCHING clause must be evaluable to a numeric type. |
Explanation |
The specified WITHIN expression evaluates to a type that is not numeric, e.g., STRING. But WITHIN expressions must be numeric. |
Action |
Change the WITHIN expression such taht is evaluates to a numeric type. |
WEPRME1461 | Check the DURATION expression. |
Explanation |
The DURATION expression contains an unspecific error. |
Action |
Check the DURATION expression. |
WEPRME1462 | Check the WITHIN expression. |
Explanation |
The WITHIN expression contains an unspecific error. |
Action |
Check the WITHIN expression. |
WEPRME1469 | The maximum window size must not be smaller than or equal to 0. |
Explanation |
The maximum windo size specifies the maximum validity an event can get applied by the window operator. As validities are always greater than zero the maximum window size also has to be. |
Action |
Specify a maximum window size that is greater than 0. |
WEPRME1471 | The size of a count-based window can only be specified using a numeric constant. |
Explanation |
Count-based windows does not support window size specification using numeric expressions. |
Action |
Replace the window size expression by a numeric constant. |
WEPRME1472 | Check the window size expression. |
Explanation |
The window size expression contains an unspecific error. |
Action |
Check the window size expression. |
WEPRME1473 | Only constant maximum windows sizes, i.e., milliseconds, seconds, minutes or hours, are allowed for time-based windows. |
Explanation |
The maximum window size must be evaluable to a constant amount of milliseconds. For this reason only constant time units are supported. |
Action |
Use a constant unit, i.e., millisecond, second, minute or hour, when specifying a maximum window size. |
WEPRME1474 | The size of a time-based window can''t be specified using a non-numeric constant. |
Explanation |
The window size is specified by a non-numeric constant. |
Action |
Replace the non-numeric constant window size specification by a numeric constant or an expression that can be evaluated to a numeric type. |
WEPRME1475 | The window size must not be greater than the specified maximum window size. |
Explanation |
The computed window size was greater than the specified maximum window size. |
Action |
Check the window size expression if it could be limited to results that are less than or equal to the specified maximum window size or adapt (or remove) the specified maximum window size. |
WEPRME1476 | The user {0} does not have the privilege to refresh the table. |
WEPRME1477 | The table {0} does not support triggered cache refresh! |
Explanation |
The table is configured with no support for a a-periodic, triggered cached refreshed. |
Action |
Change the AccessProperties of the table and enable supportsTriggeredRefresh option to enable a-periodic triggering of table refreshes. |
WEPRME1479 | The required complete-from timestamp cannot be guaranteed by the source. |
Explanation |
The source operator cannot guarantee the semantic subscription time requested when preparing the query. |
Action |
Change or remove the requested semantic subscription time when preparing the query. |
WEPRME1480 | The required complete-from timestamp cannot be guaranteed by the source adapter (not an intra source adapter). |
Explanation |
Only intra source adapters are able to guarantee semantic subscription time requests when preparing a query. |
Action |
Use registered intra source adapters or remove the requested semantic subscription time when preparing the query. |
WEPRME1481 | The required complete-from timestamp cannot be guaranteed by the source adapter (intra source adapter does not support requesting semantic subscription times). |
Explanation |
The used intra source adapter does not support guaranteed semantic subscription time requests when preparing a query. |
Action |
Use intra source adapters supporting this feature or remove the requested semantic subscription time when preparing the query. |
WEPRME1482 | The required complete-from timestamp cannot be guaranteed by the source adapter (intra source adapter is not able to provide the requested semantic subscription time). |
Explanation |
The used intra source adapter is not able to guarantee the semantic subscription time requested when preparing the query. |
Action |
Change or remove the semantic subscription time requested when preparing the query. |
WEPRME1483 | The required complete-from timestamp cannot be guaranteed by the operator. |
Explanation |
The operator is already opened and the requested semantic subscription time cannot be guaranteed anymore. |
Action |
Modify or remove the semantic subscription time requested when preparing the query. |
WEPRME1484 | The required complete-from timestamp cannot be guaranteed by the count-based window. |
Explanation |
Count-based windows does not support requesting semantic subscription times when preparing a query. |
Action |
Remove the count-based window from the query or remove the semantic subscription time request when preparing the query. |
WEPRME1485 | The duration must not be NULL. |
Explanation |
The duration expression was evaluated to NULL. |
Action |
The duration expression must not return NULL as it cannot be interpreted as a duration value. Modify the expression in such a way that it cannot return NULL when being evaluated using the incoming data. |
WEPRME1486 | The within must not be NULL. |
Explanation |
The within expression was evaluated to NULL. |
Action |
The within expression must not return NULL as it cannot be interpreted as a within value. Modify the expression in such a way that it cannot return NULL when being evaluated using the incoming data. |
WEPRME1487 | The window size must not be NULL. |
Explanation |
The window size expression was evaluated to NULL. |
Action |
The window size expression must not return NULL as it cannot be interpreted as a window size value. Modify the expression in such a way that it cannot return NULL when being evaluated using the incoming data. |
WEPRME1488 | Execution is already started. |
WEPRME1489 | Execution is already stopped and may not be restarted. |
WEPRME1490 | Execution is not started, yet. |
WEPRME1491 | Execution is already stopped. |
WEPRME1492 | Error unregistering mBean ''{0}''. |
WEPRME1493 | Failed to invoke setter on class ''{0}''. |
WEPRME1494 | Failed to invoke action ''{0}'' on class ''{1}''. |
WEPRME1495 | Failed to invoke getter ''{0}'' on class ''{1}''. |
WEPRME1496 | Attribute name cannot be null. |
WEPRME1498 | Getter must not be invoked as long as metadata is not activated. |
WEPRME1499 | Attribute ''{0}'' not found in class ''{1}''. |
WEPRME1500 | Setters is not supported. |
WEPRME1501 | Action name cannot be null. |
WEPRME1502 | No parameters allowed. |
WEPRME1503 | No Signature allowed. |
WEPRME1504 | Action name has to start with either {0}, {1} or {2}. |
WEPRME1505 | No such metaDataIdentifier found: {0}. |
WEPRME1506 | Unsupported parameter type: {0}. |
WEPRME1508 | Aggregates are not allowed in the GROUP BY clause. |
Explanation |
As the grouping is applied before the aggregates are computed on the groups it is not allowed to use aggregates in the GROUP BY clause. |
Action |
Remove the aggregate from the GROUP BY clause. |
WEPRME1509 | Check the specified group expression. |
Explanation |
The group expression contains an unspecific error. |
Action |
Check the group expression for errors. |
WEPRME1510 | Check the specified predicate (having clause). |
Explanation |
The predicate contains an unspecific error. |
Action |
Check the predicate for errors. |
WEPRME1511 | Only operators can be used as child nodes of a limit operator. |
Explanation |
A non-operator node was passed as the input node of a limit operator, where only an operator node is allowed. |
Action |
Supply an operator node as the child of a limit operator. |
WEPRME1512 | Only operators can be used as child nodes of an order operator. |
Explanation |
A non-operator node was passed as the input node of an order operator, where only an operator node is allowed. |
Action |
Supply an operator node as the child of an order operator. |
WEPRME1513 | Translation mode does not support operators of type {0}. |
Explanation |
An unsupported operator was found during the translation of an SQL statement. The operator may be invalid for the current mode , but valid in other translation mode. |
Action |
Avoid SQL statements using the offending operator, or use a translation mode that supports it. |
WEPRME1514 | Invalid aggregate in ORDER BY clause. |
Explanation |
An ORDER BY clause was found to contain an aggregate function, which was not specified earlier in the same query. This is not allowed, an ORDER BY clause must not introduce new aggregate functions. |
Action |
Correct SQL statement, e.g. by adding the aggregate in question to the SELECT list. |
WEPRME1515 | Check the specified part of the ORDER BY clause. |
Explanation |
The ORDER BY clause was found to contain some invalid construct. |
Action |
Inspect ORDER BY clause and remove any invalid expressions. |
WEPRME1516 | Subquery not allowed in this context. |
Explanation |
A subquery was found in a context, where it is not supported. |
Action |
Correct statement according to the language specification. |
WEPRME1517 | Subquery results in more than one column, where it must be a single column. |
Explanation |
A subquery in a comparison of the where clause must result in a single column. |
Action |
Correct SQL statement. |
WEPRME1518 | Invalid frame bound. |
Explanation |
A window definition contained an invalid frame bound. A frame bound of UNBOUNDED FOLLOWING is not allowed on the left hand side of a window frame BETWEEN definition, and a frame bound of UNBOUNDED PRECEDING is not allowed on the right hand side. |
Action |
Correct SQL statement. |
WEPRME1519 | Window function not allowed in this context. |
Explanation |
A window function was found in a context, where it is not supported. |
Action |
Correct statement according to the language specification. |
WEPRME1520 | Check the specified part of the window specification. |
Explanation |
A window specification was found to contain some invalid construct. |
Action |
Inspect window specification and remove any invalid expressions. |
WEPRME1521 | Only operators can be used as child nodes of a window aggregation operator. |
Explanation |
A non-operator node was passed as the input node of a window aggregation operator, where only an operator node is allowed. |
Action |
Supply an operator node as the child of a window aggregation operator. |
WEPRME1524 | Invalid nested aggregate function reference. |
Explanation |
The argument of a set function invocation cannot be another set function. |
Action |
Correct SQL statement. |
WEPRME1535 | The 2nd argument of the ROUND function must be of type integer. |
Explanation |
The 2nd argument of the given ROUND function call is not of type integer which is mandatory. |
Action |
Change the expression specifying the 2nd argument of ROUND function such that it is of type integer. |
WEPRME1536 | Unable to parse long value due to wrong number format. {0} |
Explanation |
The given literal does not comply with the structure of an integral number, i.e. it contains characters other than 0-9,+,-. |
Action |
Please remove any invalid characters from your integer literal. |
WEPRME1537 | Unable to parse integer value due to wrong number format. {0} |
Explanation |
The given literal does not comply with the structure of an integral number, i.e. it contains characters other than 0-9,+,-. |
Action |
Please remove any invalid characters from your integer literal. |
WEPRME1538 | If FROM is specified in the TRIM function,either the trim specification (LEADING, TRAILING, or BOTH) or the trim character or both have to be specified. |
Explanation |
If FROM is specified in the TRIM function,either the trim specification (LEADING, TRAILING, or BOTH) or the trim character or both have to be specified. |
Action |
Either add the trim specification, the trim character or both. Alternatively remove the FROM clause. |
WEPRME1539 | Only expressions are permitted for the trim source argument of the TRIM function. |
Explanation |
Only expressions are permitted for the trim source argument of the TRIM function. |
Action |
Use an expression for the trim source argument. |
WEPRME1540 | Only expressions are permitted for the trim character argument of the TRIM function. |
Explanation |
Only expressions are permitted for the trim character argument of the TRIM function. |
Action |
Use an expression for the trim character argument. |
WEPRME1541 | The {1} function only supports STRING values as argument for the substring source. |
Explanation |
The {1} function only supports STRING values as argument for the substring source. |
Action |
Use a STRING value as argument for the substring source. |
WEPRME1542 | The {1} function only supports INTEGER values as argument for the start position. |
Explanation |
The {1} function only supports INTEGER values as argument for the start position. |
Action |
Use an INTEGER value as argument for the start position. |
WEPRME1543 | The {1} function only supports INTEGER values as argument for the string length. |
Explanation |
The {1} function only supports INTEGER values as argument for the string length. |
Action |
Use and INTEGER value as argument for the string length. |
WEPRME1544 | The {1} function only supports STRING values as argument for the trim character. |
Explanation |
The {1} function only supports STRING values as argument for the trim character. |
Action |
Use a STRING value as argument for the trim character. |
WEPRME1545 | The {1} function only supports STRING values as argument for the trim source. |
Explanation |
The {1} function only supports STRING values as argument for the trim source. |
Action |
Use a STRING value as argument for the trim source. |
WEPRME1546 | The argument of the {0} function must be of type STRING or CHARACTER. |
Explanation |
The argument of the LOWER and the UPPER function must be of type STRING or CHARACTER. |
Action |
Use a STRING or CHARACTER value as argument for the LOWER and the UPPER function. |
WEPRME1547 | For the SUBSTRING function the substring source must be of type STRING and the start position and string length must be of type INTEGER. |
Explanation |
For the SUBSTRING function the substring source must be of type STRING and the start position and string length must be of type INTEGER. |
Action |
Use a STRING value for the substring source and an INTEGER value for the start poistion and the string length. |
WEPRME1548 | For the TRIM function the trim source must be of type STRING and the trim character must be of type STRING or CHARACTER. |
Explanation |
For the TRIM function the trim source must be of type STRING and the trim character must be of type STRING or CHARACTER. |
Action |
Use a STRING value for the trim source and a STRING or CHARACTER value for the trim character. |
WEPRME1549 | A {0} operation must have exactly three sub-expressions. |
Explanation |
A {0} operation must have exactly three sub-expressions. |
Action |
Ensure that the {0} operation has exactly three sub-expressions. |
WEPRME1550 | The LOWER and the UPPER function only support STRING and CHARACTER values. |
Explanation |
The LOWER and the UPPER function only support STRING and CHARACTER values. |
Action |
Ensure that only STRING and CHARACTER values are used. |
WEPRME1551 | The trim character for the TRIM function must have exactly one character. |
Explanation |
The trim character for the TRIM function must have exactly one character. |
Action |
Use a single character as trim character for the TRIM function. |
WEPRME1552 | The values for start position and start length of the SUBSTRING function are not valid. |
Explanation |
The values for start position and start length of the SUBSTRING function are not valid. |
Action |
Use correct values for start position and start length of the SUBSTRING function. |
WEPRME1555 | The return type of method {0} needs to be assignable to {1}. Found: {2}. |
WEPRME1556 | The first parameter of method {0} needs to be the same class or a super-class of {1}. Found: {2}. |
WEPRME1557 | Mmethod {0} is expected to have return type {1}. Found: {2}. |
WEPRME1558 | Method {0} is expected to have {1,choice,0#no parameters| 1#exactly one parameter| 1<exactly {1,number} parameters}. |
WEPRME1559 | The function cannot be registered. |
WEPRME1560 | The function factory cannot be registered. |
WEPRME1561 | The class of the user-defined function adapter factory must not be null. |
WEPRME1562 | The class of the user-defined aggregation function adapter factory must not be null. |
WEPRME1565 | Receiver version is to old to handle serialized user defined aggregation function adapter factory. |
WEPRME1567 | Failed to instantiate user defined window function for call ''{0}''. {1} |
WEPRME1568 | The signature {0} of the retrieved user defined window function for call ''{1}'' is invalid. {2} |
WEPRME1569 | Failed to instantiate user defined aggregation function for call ''{0}''. {1} |
WEPRME1570 | The signature {0} of the retrieved user defined aggregation function for call ''{1}'' is invalid. {2} |
WEPRME1571 | Failed to instantiate user defined function for call ''{0}''. {1} |
WEPRME1572 | The signature {0} of the retrieved user defined function for call ''{1}'' is invalid. {2} |
WEPRME1573 | Unknown window function type {0}. |
WEPRME1574 | Parameter number {0} of method {1} is expected to be serializable. |
WEPRME1575 | The mask ''{0}'' defining the temporal format is not valid. |
Explanation |
The mask ''{0}'' defining the temporal format is not valid. |
Action |
Select a valid temporal format. |
WEPRME1576 | Date conversion error for value ''{0}''. |
Explanation |
Date conversion error for value ''{0}''. |
Action |
Enter a valid date. |
WEPRME1577 | Unsupported date field ''{0}''. |
Explanation |
Unsupported date field ''{0}''. |
Action |
Select a valid date field. |
WEPRME1578 | Conversion to date failed for input string ''{0}''. |
Explanation |
Conversion to date failed for input string ''{0}''. |
Action |
Enter a valid input string. |
WEPRME1582 | RequiredUserDefinedAggregationFunctions may not be null. |
WEPRME1583 | The aggregation function adapter may not be null. |
WEPRME1584 | The function adapter may not be null. |
WEPRME1585 | The window function adapter may not be null. |
WEPRME1586 | The connected system does not support the registration of user-defined window functions. |
WEPRME1587 | The connected system does not support the de-registration of user-defined window functions. |
WEPRME1588 | The class of the user-defined window function adapter must not be null. |
WEPRME1589 | The server user-defined window function cannot be registered. |
WEPRME1590 | The class of the user-defined window function adapter factory must not be null. |
WEPRME1591 | The class of the user-defined aggregation function adapter factory must not be null. |
WEPRME1592 | The user-defined window function cannot be deregistered. |
WEPRME1593 | The user-defined window function cannot be registered. |
WEPRME1594 | The user-defined window function adapter factory must not be null. |
WEPRME1595 | The user {0} does not have the privilege to add the user-defined window function. |
WEPRME1596 | A user-defined window function factory is already registered for {0}.{1}. |
WEPRME1597 | No user-defined window function is registered for {0}.{1}. |
WEPRME1598 | The user-defined window function {0}.{1} cannot be deregistered as it is still in use. |
WEPRME1599 | A window function is not allowed in this context. |
WEPRME1600 | The signature of the user-defined window function {0} does not match the specified types ({1}). |
WEPRME1601 | The user-defined window function {0} is unknown or not visible. |
WEPRME1602 | DISTINCT mode is not allowed for user-defined aggregates. |
WEPRME1603 | The window function {0} is expected to have exactly {1} sub-expression(s). |
WEPRME1604 | Unknown window function type {0}. |
WEPRME1605 | Window functions are not supported in ACTIVE mode. |
WEPRME1606 | Unknown window function operator mode {0}. |
WEPRME1607 | Unexpected sub-expression type {0}. Aggregate or window function expected. |
WEPRME1608 | Invalid aggregation function adapter factory: Resolved a valid signature for the call ''{0}'', but failed to instantiate an adapter. |
WEPRME1609 | Invalid usage of aggregation function adapter factory. The signature for the call ''{0}'' had not been resolved before attempting to instantiate the adapter. |
WEPRME1610 | Invalid function adapter factory: Resolved a valid signature for the call ''{0}'', but failed to instantiate an adapter. |
WEPRME1611 | Invalid usage of function adapter factory. The signature for the call ''{0}'' had not been resolved before attempting to instantiate the adapter. |
WEPRME1612 | Invalid window function adapter factory: Resolved a valid signature for the call ''{0}'', but failed to instantiate an adapter. |
WEPRME1613 | Invalid usage of window function adapter factory. The signature for the call ''{0}'' had not been resolved before attempting to instantiate the adapter. |
WEPRME1614 | Only expressions can be used as child nodes of a window function expression. |
WEPRME1615 | Window function {0} is only applicaple over ordered windows. |
WEPRME1616 | Window function {0} is only applicaple over unbounded windows. |
WEPRME1617 | The user {0} does not have the privilege to remove the user-defined window function. |
WEPRME1618 | The signature's return type may not be null. |
WEPRME1619 | The signature's parameter types may not be null. |
WEPRME1620 | Only expressions are permitted in a PARTITION BY clause. |
WEPRME1621 | The {0,choice,0#parameter|1#instantiation parameter} types may not be null. |
WEPRME1622 | Expected at least {1} {0,choice,0#parameter|1# instantiation parameter} type(s), found {2}. |
WEPRME1623 | Expected at most {1} {0,choice,0#parameter|1# instantiation parameter} type(s), found {2}. |
WEPRME1624 | The {1}-th {0,choice,0#parameter|1#instantiation parameter} type is expected to be numeric, but is {2}. |
WEPRME1625 | {0,choice,0#Parameter|1#Instantiation parameter} types may not be null (found null at index {1}). |
WEPRME1626 | {0,choice,0#Parameter|1#Instantiation parameter} type {1} is expected to be compatible with type {2}. Found {3}. |
WEPRME1627 | The number of input parameter types differs. Expected {0}, but was {1}. |
WEPRME1628 | The {0}-th input parameter type may not be null. |
WEPRME1629 | The {0}-th parameter type is exepected to be assignable to type {1}. Was: {2}. |
WEPRME1630 | The Return type may not be null. |
WEPRME1631 | Incompatible return types. Expected {0}, but was {1}. |
WEPRME1632 | The number of instantiation parameter types differs. Expected {0}, but was {1}. |
WEPRME1633 | The {0}-th instantiation parameter may not be null. |
WEPRME1634 | The {0}-th instantiation parameter is exepected to be equal to or a sub-type of {1}. Was: {2}. |
WEPRME1635 | No {0,choice,0#parameter|1#instantiation parameter} types expected. Found {1}. |
WEPRME1636 | The given window function requires an ORDER BY clause in the window specification. |
WEPRME1637 | The given window function does not accept a bounded frame given in the window specification. |
WEPRME1638 | Unable to cast the given object to the specified type ''{0}''. |
WEPRME1639 | Unable to convert the given date ''{0}''. |
WEPRME1640 | Unable to convert the given date of class {0}. |
WEPRME1641 | Unable to read next record. |
WEPRME1642 | Unable to convert the next record. |
WEPRME1643 | Remove not supported. |
WEPRME1644 | Reset not supported. |
WEPRME1645 | Unable to initialize JSON parser on given reader. |
WEPRME1646 | The field {0} is neither a group column nor part of an exact match of a group expression or an aggregate call. |
Explanation |
Queries including grouping and/or aggregates are only able to use group columns/expressions and aggregate calls in the select list. |
Action |
Either add the missing column to the group columns or remove the grouping/aggregation from the query. |
WEPRME1647 | The combination of grouping and/or aggregation and (qualified) star expressions in the select list is not allowed. |
Explanation |
Since (qualified) star expressions are matching input/subquery columns and these columns are usually not preserved by grouping/aggregation the combination of both is not allowed. |
Action |
Explicitely enumerate the columns in the select list that should be contained in the result. |
WEPRME1648 | Unable to extract RecordMetaData. Reason: {0}. |
Explanation |
The schema (RecordMetaData) extraction for a BigMemory Data Source terminated with an error. |
Action |
Investigate the 'Reason' specified in the message. |
WEPRME1649 | Measure must be either euclidean, manhattan, cosine, tanimoto, or squaredeuclidean. |
WEPRME1650 | Only operators can be used as child nodes of an external subquery operator. |
WEPRME1651 | An external subquery operator must have exactly one input operator. |
WEPRME1652 | Invalid record found in cache {0} while fetching value of {1}. |
WEPRME1653 | Unknown outer join type ''{0}''. |
WEPRME1654 | Unknown semi join type ''{0}''. |
WEPRME1656 | I/O exception while reading XML input. |
WEPRME1657 | Record conversion exception while reading XML input. |
WEPRME1658 | An exception occured while processing XQuery: {0} |
WEPRME1659 | PN approach is not supported for geometric mean. |
WEPRME1660 | Unable to create an aggregation factory instance for input types {0}. |
WEPRME1661 | The parameter ''k'' needs to be an integer greater than 0. |
WEPRME1662 | The parameter ''iterations'' needs to be an integer greater than 0. |
WEPRME1663 | The parameter ''measureId'' needs to match one of: euclidean, manhattan, cosine, tanimoto or squaredeuclidean. |
WEPRME1664 | Unknown cross join type ''{0}''. |
WEPRME1665 | The source this scalar has to provide exactly one result. |
WEPRME1666 | The source of scalar has to provide at most one result. |
WEPRME1667 | No matching adapter found for signature {0}. |
WEPRME1668 | Ambiguous adapters: {0} |
WEPRME1669 | Unable to create instance. |
WEPRME1670 | The given list of adapters contains adapters with identical parameter types. |
WEPRME1671 | The given adapter classes must not be null. |
WEPRME1672 | The given adapter parameters must not be null. |
WEPRME1673 | The number of given adapter classes and parameter type lists does not match. |
WEPRME1674 | Unable to instantiate adapter {0}. |
WEPRME1675 | Wrong parameters - use at least class name and method name and if ambiguous add parameter class names. |
WEPRME1676 | The method {0} is not declared in class {1} with the given parameter types {3}. |
WEPRME1677 | Wrapping given operator of approach {0} to approach {1} is not supported. |
WEPRME1678 | Violation of push-scalar operator rules. |
WEPRME1679 | Left status structure has to support temporal queries. |
WEPRME1680 | Right status structure has to support temporal queries. |
WEPRME1681 | Unknown authentication type ''{0}''. |
WEPRME1682 | Requesting required complete-from is not supported by this intra source adapter. |
WEPRME1683 | Property {0} is unknown! Please check the property name. |
WEPRME1684 | Value {1} is not in defined domain ({2}) of property {0}! Please check the property value. |
WEPRME1685 | Value {1} of property {0} is not in the defined range! Please check the property value. |
WEPRME1686 | The mandatory property {0} is not provided (level {1})! |
WEPRME1688 | The given system propeties must not be null. |
WEPRME1689 | The class of the pull source cannot be found. |
WEPRME1690 | The IS comparison is only allowed with a NULL constant as second argument. |
WEPRME1691 | Only established connections can be marked as broken. |
WEPRME1692 | Only established connections can be marked as shutting down. |
WEPRME1693 | Unable to connect to cluster within {0} seconds. |
WEPRME1696 | An exception occurred while recovering connection to {0}. |
WEPRME1702 | The pull result is already closed. |
WEPRME1703 | The pull result has run out of data. |
WEPRME1704 | This handler is not handling any synchronous command. |
WEPRME1705 | This handler is not handling any asynchronous command. |
WEPRME1706 | The server user-defined aggregation function factory cannot be registered. |
WEPRME1707 | The pull source adapter must not be null. |
WEPRME1708 | The pull source cannot be prepared. |
WEPRME1709 | The parameters for the server pull source must not be null. |
WEPRME1710 | The class for the server pull source must not be null. |
WEPRME1711 | The server function factory cannot be registered. |
WEPRME1712 | The server user-defined window function factory cannot be registered. |
WEPRME1713 | The server pull source cannot be prepared. |
WEPRME1714 | The query parameters must not be null. |
WEPRME1715 | The query cannot be removed. |
WEPRME1716 | The query cannot be executed. |
WEPRME1717 | The batch job cannot be started because the connection has already been shut down by the server. |
WEPRME1718 | The data source cannot be registered. |
WEPRME1719 | The table cannot be registered. |
WEPRME1720 | The parameters for the pull source must not be null. |
WEPRME1721 | The pull source must not be null. |
WEPRME1722 | The pull source cannot be prepared. |
WEPRME1723 | Not supported in HA mode. |
WEPRME1725 | Unable to add a node that is not the root of a logical query graph. |
WEPRME1726 | Unable to remove a node that is not the root of a logical query graph. |
WEPRME1727 | Only operators can be used as child nodes of a scalar operator. |
WEPRME1728 | A scalar operator must have exactly one input operator. |
WEPRME1729 | A scalar operator must not have more than one input operator. |
WEPRME1730 | Scalar is not supported for BA approach. |
WEPRME1731 | Incompatible approach. |
WEPRME1735 | Server shutting down. |
WEPRME1736 | Unexpected type: Tried to receive {0} but got {1}. |
WEPRME1737 | There is no server running with id {0}, {1}. |
WEPRME1738 | There is already a server running with id {0}, {1}. |
WEPRME1739 | Invalid ID {0} (must be numeric). |
WEPRME1740 | IndexedStorage should be initialized with an empty cache. |
WEPRME1741 | Unable to create temporary file for buffering the content of the reader. |
WEPRME1742 | Unable to read from temporary file. |
WEPRME1743 | Error during execution of Pull Query {0}. |
Explanation |
A severe runtime error has occured. |
Action |
Analyze detailed log information and the cause of the exception. |
WEPRME1744 | Window specification using ROWS requires frame bounds to be of type LONG. |
WEPRME1745 | Window specification using RANGE requires the order-by column to be of numeric type. Found: {0}. |
WEPRME1746 | Window specification using RANGE requires at least one numeric order-by expression. |
WEPRME1747 | Window specification using RANGE and custom frame bounds requires exactly one numeric order-by expression. |
WEPRME1748 | Unable to prefetch data. |
WEPRME1749 | An error occured during subscription handling. |
WEPRME1750 | Partition/Window entries are not comparable as the OVER clause did not contain an order-by expression. |
WEPRME1751 | Only expressions can be used as child nodes of window function {0}. |
WEPRME1752 | The user-defined function {0} cannot be used as a window function. |
Explanation |
Only (user-defined) window functions and (user-defined) aggregate functions can be used as window functions. But the specified function is an user-defined function. |
Action |
Either replace the user-defined function by a (user-defined) window function or by an (user-defined) aggregate function or remove the window specification. |
WEPRME1753 | The source {0} is ambiguous. Check if sources are properly renamed and no duplicate aliases are introduced. |
WEPRME1754 | The given window function does not allow the specification of a window frame. |
WEPRME1755 | The subquery used in WHERE clause produced a non-scalar result. |
Explanation |
When neither ALL or ANY is specified only scalar subqueries can be used with a relational operator in a WHERE clause. |
Action |
Change the subquery such that it produces a scalar result. |
WEPRME1756 | Unsupported XML entity: {0} |
WEPRME1757 | Unable to handle the JSON token ''{0}''. |
WEPRME1758 | Unable to parse the given JSON input: {0} |
WEPRME1759 | Unable to read the given JSON input. |
WEPRME1760 | Error converting value ''{0}'' of column ''{1}'' to type {2} due to the following issue: {3} |
WEPRME1761 | The JSON input contains an unmatched END-ARRAY token. |
Explanation |
The underlying JSON parser produced an END-ARRAY token without an according START-ARRAY token. |
Action |
Check the processed JSON input. |
WEPRME1762 | The JSON input contains an unexpected {0} token. |
Explanation |
The JSON parser produced an unexpected token. |
Action |
Check the processed JSON input. |
WEPRME1763 | The JSON input contains an unmatched START-OBJECT token. |
Explanation |
The JSON parser produced a START-OBJECT token without an according END-Object token. |
Action |
Check the processed JSON input. |
WEPRME1764 | Unable to read JSON input. |
Explanation |
An I/O exception occurred while reading the JSON input. |
Action |
Check the processed JSON input. |
WEPRME1765 | The connection locale may not be null. |
WEPRME1766 | Unable to open the specified file {0}. |
WEPRME1767 | Unable to reset buffered reader. |
WEPRME1769 | The following error has been reported {0} times and any recurrences will be suppressed: {1} |
WEPRME1770 | Unable to compute stream metadata for user-defined source factory. |
WEPRME1771 | Exception occurred while inferring schema. |
WEPRME1772 | Super column value is incompatible with defined type. Configured ''{0}'' but actually was ''{1}''. |
WEPRME1773 | Super column metadata differs among source factories for the same pull source. Expected ''{0}'', but was ''{1}''. |
WEPRME1774 | SearchAttribute name at index {0} must not be null. |
WEPRME1775 | The given search attribute {0} cannot be found. |
WEPRME1776 | Dynamic indexing is not supported for search attribute {0} as it is of type {1}. |
WEPRME1778 | Return type of UDX {0} does not comply with the schema: expected {1} but found {2}. |
WEPRME1779 | Null not allowed as return value of UDX {0}. |
WEPRME1780 | Method getComputedNext() may only be used after next(). |
WEPRME1781 | Could not find a source node in external subquery graph. |
WEPRME1782 | Error closing communication: {0}. |
WEPRME1784 | Failed to create directory {0}. |
WEPRME1786 | Repository contains an artefact of unexpected type {0} with owner {1} and identifier {2} that is using a pull query. |
WEPRME1787 | Unable to parse the given XML document: {0}. |
Explanation |
An error occurred while parsing the given XML document. |
Action |
Check the underlying exception's message |
WEPRME1788 | The query language {0} is not supported. |
Explanation |
The specified query language parameter is not supported by this method. |
Action |
Change the query language parameter to one of the supported query languages, e.g., SQL or XML. |
WEPRME1789 | The constructor of RemotePullSourceFactory requires two to four parameters ([host [port]] user password). |
Explanation |
The constructor was called with the wrong number of String arguments. |
Action |
Call the constructor with the parameters (host, port, user, password) or (host, user, password) or (user, password). |
WEPRME1790 | Unable to prepare the XML representation of the external subquery for the remote RTM system. |
Explanation |
An error occurred when preparing the external subquery that should be executed by the remote RTM system. |
WEPRME1791 | The external subquery does not have any registered source. |
WEPRME1792 | The external subquery does have more than one registered source. |
WEPRME1793 | Grouping set(s) not supported in this context. |
Explanation |
A query contained a group by clause that specifies any of GROUPING SETS, ROLLUP, or CUBE, or an empty grouping set. This is not supported with either a SetCondition, nor with push processing mode. |
Action |
Modify query in order to obey the restriction on grouping sets. |
WEPRME1794 | Grouping operation argument must be a group expression. |
Explanation |
The query contains a grouping operation with an invalid argument. The arguments of a grouping operation must be grouping expressions. |
Action |
Modify query to contain only group expressions as arguments of a grouping operation. |
WEPRME1795 | Grouping-set bit index may not be larger than number of group expressions. Was {0} > {1}. |
WEPRME1796 | Grouping-set multiplicity may not be less than 1. Was {0}. |
WEPRME1797 | Grouping-sets do not cover all group expressions. Uncovered indices: {0}. |
WEPRME1798 | The GROUPING function currently supports only up to 64 arguments. Found {0}. |
WEPRME1799 | Parallel computation of GROUPING-SETS operator was interrupted. |
WEPRME1800 | Exactly one parameter expected. |
WEPRME1801 | Parameter type not supported by wrapped Aggregator. |
WEPRME1802 | The given node does not provide a field name. |
WEPRME1803 | The group expression does not provide a field name. |
WEPRME1804 | Unsupported aggregation type {0}. |
WEPRME1805 | The aggregates attribute does not provide a field name. |
WEPRME1806 | Predicate is neither a logical operation, comparison nor boolean expression. |
WEPRME1807 | Neither attribute of the comparison is a field. |
WEPRME1808 | The sort specification does not provide a field name. |
WEPRME1809 | Mapping has a Field with childIndex > 0 |
WEPRME1810 | The given attribute {0} is not contained in search attributes. |
WEPRME1811 | The given node is no constant. |
WEPRME1812 | Unable to extract record metadata. |
WEPRME1813 | Number of clusters (k) has to be greater than 0. |
WEPRME1814 | Number of iterations needs to be greater than 0. |
WEPRME1815 | Unknown measure {0}. Valid measures are: {1}. |
WEPRME1816 | Invalid or missing delimiter. |
WEPRME1817 | Invalid or missing field index. |
WEPRME1818 | Getting an adapter factory for {0} was not successful. |
WEPRME1819 | Unknown raql window function type: {0} |
WEPRME1820 | SupportsReset is only allowed after init. |
WEPRME1821 | SupportsPeek is only allowed after init. |
WEPRME1822 | SupportsRemove is only allowed after init. |
WEPRME1823 | The SinglePullSourcePullSourceFactory only supports parameterless usage. |
WEPRME1824 | Left bounds other than UNBOUNDED PRECEDING or CURRENT ROW are not supported in this context. |
WEPRME1825 | Right bounds other than UNBOUNDED FOLLOWING or CURRENT ROW are not supported in this context. |
WEPRME1826 | Illegal frame bounds: {0} > {1}. |
WEPRME1827 | Operation type is unknown or can not be processed. |
WEPRME1828 | At least three items have to be allowed. |
WEPRME1829 | Legend must not be null! |
WEPRME1830 | Number of legends must be equal to number of chart types! |
WEPRME1831 | Start and/or end does not fit actual day. |
WEPRME1832 | Unsupported message type: {0}. |
WEPRME1833 | Unsupported callback type. |
WEPRME1834 | Login only allowed for initialized login module. |
WEPRME1835 | Commit only allowed for login module after successful login. |
WEPRME1836 | Could not create login context. |
WEPRME1837 | Unknown Callback. |
WEPRME1838 | The GROUPING-SET operator's search lattice is expected to have only one single entry with key 'null' on its root level. |
WEPRME1839 | Master and slave produce different results. |
WEPRME1840 | The buffer must not be smaller than 1: {0} |
WEPRME1841 | The pre-fetching number must not be smaller than 1: {0}. |
WEPRME1842 | The pre-computing number must not be smaller than 1: {0}. |
WEPRME1843 | The result block size number must not be smaller than 1: {0}. |
WEPRME1844 | The pull result adapter must not be null. |
WEPRME1845 | The pull query could not be executed. |
WEPRME1846 | A subscription to a pull query was not possible. |
WEPRME1847 | The pull result adapter class must not be null. |
WEPRME1848 | Could not unsubscribe from pull query. |
WEPRME1849 | Unable to subscribe to pull query. |
WEPRME1850 | Subscriptions to pull queries are currently not supported in HA mode. |
WEPRME1851 | Users may only remove subscriptions from their own schema. |
WEPRME1852 | The pull result could not be closed. |
WEPRME1853 | Cannot change to existing remote connection id {0}. |
WEPRME1854 | Remote connection id does not match the Id defined by the current master. |
WEPRME1855 | The class could not be found. |
WEPRME1856 | ServerConnectionHandler may not be null. |
WEPRME1857 | Detected second master: {0} <-> {1} |
WEPRME1858 | The result adapter was already closed. |
WEPRME1859 | No adapter found for handling. |
WEPRME1860 | Error in handling remote subscription. |
WEPRME1861 | Class {0} does not provide a default constructor, which is obligatory. |
WEPRME1862 | A subscription with this name exists already. |
WEPRME1863 | Cannot make a persistent subscription to a non-persistent query. |
WEPRME1864 | Cannot unsubscribe from a subscription, which does not exist. |
WEPRME1865 | The provided subscription parameter should not be null. |
WEPRME1866 | The execution time must not be null. |
WEPRME1867 | A non-server subscription cannot be made persistent. |
WEPRME1868 | Logical Constant is not a boolean. |
WEPRME1869 | Child does not have REFERENCED_FIELDS metadata. |
WEPRME1870 | Not implemented. |
WEPRME1871 | Unknown Predicate Type. |
WEPRME1872 | Could not find source of expression: {0}. |
WEPRME1873 | Mapping has a Field with childIndex > 0. |
WEPRME1874 | Parent grouping-set has not been set yet. |
WEPRME1875 | Rule broken: inverse map does not contain the source of a referenced field. |
WEPRME1876 | Mappings are not supposed to have ANCHOR->CHILD_INDEX != 0. |
WEPRME1877 | Query Graph broken: Found a Field with child != 0 at Order Node: ({0}, {1}). |
WEPRME1878 | Field does not contain field index. |
WEPRME1879 | Found EQUI-Join with 0 equi-fields. |
WEPRME1880 | Cannot handle multiway NATURAL JOIN. |
WEPRME1881 | Columns named by {0} cannot be unified because of different types. |
WEPRME1882 | Found NATURAL-Join with 0 join-candidates. |
WEPRME1883 | Optimizer cannot handle IN(subquery), yet. |
WEPRME1884 | Unknown Node type encountered: {0}. |
WEPRME1885 | Argument is not a predicate. |
WEPRME1886 | Found NOT with {0} child nodes. |
WEPRME1887 | Found NOT with a child that's no predicate (is {0}). |
WEPRME1888 | getAnd() called with less than 1 node. |
WEPRME1889 | Argument is not an expression. |
WEPRME1890 | Non-String Signature Key found: {0}. |
WEPRME1891 | Unknown Node-Type: {0}. |
WEPRME1892 | Unhandled enum entry: {0}. |
WEPRME1893 | Aggregate is configured to have{0} arguments, but has actually {1} arguments. |
WEPRME1894 | WindowFunction is configured to have {0} arguments, but has actually {1} arguments. |
WEPRME1895 | Aggregate is configured to have {0} arguments, but has actually {1} arguments. |
WEPRME1896 | UNEXPECTED. |
WEPRME1897 | Function {0} only supports Double and Float values. |
WEPRME1898 | Function {0} only supports numeric values. |
WEPRME1899 | Offset must not be negative. |
WEPRME1900 | Unknown frame unit: {0}. |
WEPRME1901 | Function {0} must have exactly one sub-expression. |
WEPRME1902 | Function {0} must not have more than one sub-expression. |
WEPRME1903 | Unsupported method. |
WEPRME1904 | Communication is already closed. |
WEPRME1905 | Unhandled communication type: {0}. |
WEPRME1906 | EhcacheBasedLinkedList should be initialized with an empty cache. |
WEPRME1907 | Index: {0}, Size: {1}. |
WEPRME1908 | Not feasible to copy the whole OffHeap list into the Java heap. |
WEPRME1909 | fromIndex = {0} |
WEPRME1910 | toIndex = {0} |
WEPRME1911 | fromIndex({0}) > toIndex({1}) |
WEPRME1912 | next() has been called at all or after remove() has been called. |
WEPRME1913 | nextPos() has been called, or remove() has been called after the last call to nextPos(). |
WEPRME1914 | At least one feature toggle did not satisfy the given assertions. {0} |
WEPRME1915 | AttributeName unknown: {0}. |
WEPRME1916 | No standard filter: {0}. |
WEPRME1917 | Unknown type: {0}. |
WEPRME1918 | Failed to activate metadata handler for metadata identifier {0}. |
WEPRME1919 | The DynamicMetaDataManager is not registered. |
WEPRME1920 | This XmlPullSourceFactory accepts at most 2 instantiation parameters. Got {0}. |
WEPRME1921 | The number of instantiation parameters does not match the number of instantiation parameter types ({0} <> {1}). |
WEPRME1922 | Expected STRING instantiation parameter type at index {0}, found {1}. |
WEPRME1923 | Unhandled sink adapter type/approach: {0}. |
WEPRME1924 | Parent grouping-set has already been set and cannot be overriden. |
WEPRME1925 | Graph node is already defined: {0}. |
WEPRME1926 | Unknown graph node: {0}. |
WEPRME1927 | BigMemory does not support consecutive aggregations and applying criterias after aggregating. |
WEPRME1928 | BigMemory does not support limiting the number of elements that are aggregated, ordered and applied criterias to. |
WEPRME1929 | This aggregation function does not support merging multiple aggregation states into one. |
WEPRME1931 | The value {0} cannot be rounded to a {1} value since it is greater than the maximum or less than the minimum {1} value. |
WEPRME1932 | Argument is not a field. |
WEPRME1933 | The parameter n must be greater than 0. |
WEPRME1934 | Target array is to short. Required array size is: {0}. |
WEPRME1935 | Chunksize must be greater than 0. |
WEPRME1936 | The parameter ''times'' must be greater than 0. |
WEPRME1937 | Unable to close JSON parser. |
WEPRME1938 | Namespace with index {0} does not exist. |
WEPRME1941 | Result of operation was not a number. |
WEPRME1942 | Result of operation was infinite. |
WEPRME1943 | An overflow occured in aggregation {0} of type {1}. |
WEPRME1944 | An overflow occured in function {0} of type {1}. |
WEPRME1947 | DISTINCT aggregates cannot be pushed-down: {0}. |
WEPRME1948 | Aggregates on constant values cannot be pushed-down: {0}. |
WEPRME1949 | Expressions on constant values cannot be pushed-down: {0}. |
WEPRME1950 | Comparisons on two variables cannot be pushed-down: {0}. |
WEPRME1951 | Comparisons of type {0} cannot be pushed-down. |
WEPRME1952 | Cannot cast from {0} to {1}: {2}. |
WEPRME1953 | The expression of type {0} cannot be pushed down: {1}. |
WEPRME1954 | Unexpected data type {0} for expression {1}. |
WEPRME1955 | Illegal constant expression '*'. |
WEPRME1956 | The aggregate of type {0} cannot be pushed-down: {1}. |
WEPRME1957 | Unknown cell definition: {0} (type {1}). |
WEPRME1958 | Operation {0} on two cells cannot be pushed-down. |
WEPRME1959 | DIVISION with constant dividend is not supported in TC Store. |
WEPRME1960 | Integer DIVISION cannot be pushed-down. |
WEPRME1961 | Error parsing string {0} to XML document: {1} |
WEPRME1962 | Order expression cannot be pushed down to TC Store, as it may yield null values, which cannot be sorted properly. |
WEPRME1963 | AGGREGATION with HAVING predicate cannot be pushed down. |
WEPRME1964 | GROUP BY on constant expression cannot be pushed-down. |
WEPRME1965 | GROUP BY on complex {0} expression cannot be pushed down. |
WEPRME1966 | No aggregates to push-down. |
WEPRME1967 | OPERATOR of type {0} cannot be pushed-down. |
WEPRME1968 | ORDER BY on a constant expression cannot be pushed down. |
WEPRME1969 | The data type {0} is not supported: {1}. |
WEPRME1970 | The IN predicate's list may only contain constant expressions. |
WEPRME1971 | The IN predicate's 'member' expression may not be constant: {0}. |
WEPRME1972 | Operator {0} may not operate on a derived/non-record stream. |
WEPRME1973 | Unsupported predicate type {0}. |
WEPRME1974 | Wrong parameter type {0}. Expected STRING. |
WEPRME1975 | Unsupported type in ORDER BY clause: {0}. |
WEPRME1976 | CellDefinition is expected to have type {0}. Found {1}. |
WEPRME1977 | Complex GROUPING SETS cannot be pushed down. |
WEPRME1978 | GROUPING expressions cannot be pushed down. |
WEPRME1979 | Unexpected number of child nodes. Expected {0}, but was {1}. |
WEPRME1980 | The MAPPING is not a plain projection and cannot be pushed down. |
WEPRME1981 | The projection mapping is a parent of non-schema preserving operator and cannot be pushed down. |
WEPRME1982 | The projection mapping is a child of a DISTINCT operator and cannot be pushed down. |
WEPRME1983 | Missing XML element: {0}. |
WEPRME1984 | The TCStore type {0} cannot be mapped to a corresponding RTM type. |
WEPRME1985 | RTM type {0} cannot be mapped to corresponding TC Store type. |
WEPRME1986 | Wrong parameter ''{0}''. Expected {1}. |
WEPRME1987 | Wrong number of instantiation parameters: Expected 0 or 1, but was {0}. |
WEPRME1988 | CellCollection has no value for field {0}, but field must not be nullable. |
WEPRME1989 | Conversion of RTM record to TC record failed, as value for not-nullable field {0} is NULL. |
WEPRME1990 | RTM type {0} is not supported when converting RTM record to TC record using match mode {1}. |
WEPRME1992 | Column name ''{0}'' is not unique within the given schema and needs to be renamed. |
WEPRME1993 | Case insensitive String or Character comparisons are not supported by TC Store. |
WEPRME1994 | Cannot group on case insensitive STRING/CHARACTER in TC Store. |
WEPRME1995 | The user-defined data type {0} is not supported for serialization to a DES event. |
WEPRME1996 | The data type {0} is not supported for perfect serialization to a DES event. |
WEPRME1997 | The DES data type {0} is not supported for perfect serialization to a record. |
WEPRME1998 | The record's key cannot be referenced in arbitrary expressions. |
WEPRME1999 | The field to translate is not a key field: {0}. |
WEPRME2000 | Key column "{0}" could not found in schema. |
WEPRME2001 | Key column name ''{0}'' is not unique within the given schema. |
WEPRME2002 | The {0} data type cannot be compared or sorted. |
WEPRME2003 | The key alias {0} is not unique. |
WEPRME2004 | The following cell definitions lead to ambiguous columns: {0} |
WEPRME2005 | Key field {0} is ambiguous in the schema {1}. |
WEPRME2006 | The key field {0} could not be found in the schema {1}. |
WEPRME2007 | Unexpected duplicate fieldName {0}. |
WEPRME2008 | There are no search attributes defined for cache {0}. |
WEPRME2009 | Cannot sort on case insensitive STRING/CHARACTER in TC Store. |
WEPRME2010 | Cannot determine MIN or MAX on case insensitive STRING/CHARACTER in TC Store. |
WEPRME2011 | The provided server source factory parameters must not be null. |
Explanation |
The input parameter server source factory parameters is null. A valid server source factory parameters object must be provided. |
WEPRME2012 | The classpath entries of the provided server source factory parameter must not be null. |
Explanation |
The input parameter classpath entries is null. A valid array, either containing classpath entries or empty, must be provided. |
WEPRME2013 | The classloading strategy of the provided server source factory parameter must not be null. |
Explanation |
The input classloading strategy is null. A valid classloading strategy object must be provided. |
WEPRME2014 | User can not be added. |
WEPRME2015 | User can not be removed. |
WEPRME2016 | Insufficient permissions to add user account. |
WEPRME2017 | Insufficient permissions to remove user account. |
WEPRME2018 | User must not be null. |
WEPRME2019 | User {0} does not exist. |
WEPRME2020 | User {0} already exists. |
WEPRME2021 | Password does not stand the predicate-test. |
WEPRME2022 | System Authentication doesn't support User Management. |
WEPRMI0001 | Initializing RTM system. |
WEPRMI0002 | Configuring persistent RTM system. |
WEPRMI0003 | Initialization of RTM system finished. |
WEPRMI0004 | Starting RTM system. |
WEPRMI0005 | Start of RTM system finished. |
WEPRMI0006 | Shutting down RTM system. |
WEPRMI0007 | Shutdown of RTM system is finished. |
WEPRMI0008 | User {0} trying to locally connect to RTM system. |
WEPRMI0009 | User {0} connected to RTM system. |
WEPRMI0010 | Current HA role is {0}. |
WEPRMI0013 | HA role has been set to {0}. |
WEPRMI0015 | Slave is preparing recovery. |
WEPRMI0016 | Slave requesting recovery from master. |
WEPRMI0017 | Master has started sending recovery data to slave. |
WEPRMI0018 | Master finished sending recovery data to slave. |
WEPRMI0019 | Slave has started processing recovery request from master. |
WEPRMI0020 | Slave successfully finished processing recovery request from master. |
WEPRMI0021 | Server with newer build number {0} connected as slave. |
WEPRMI0025 | Aborted handshake due to shutdown. |
WEPRMI0026 | Handshake with remote RTM system successfully finished. |
WEPRMI0027 | Snapshot reducibility has been determined for the following query; Owner:{0}; Identifier:{1}; SQL:{2}; Snapshot reducible from:{3}; |
WEPRMI0028 | Could not connect to a running high-availability peer, now attempting to acquire master lock. |
WEPRMI1376 | Properties of RTM system: {0} |
WEPRMI1377 | Properties of JPA : {0} |
WEPRMI1412 | Remote connection server is shutting down. |
WEPRMI1413 | Client starts close procedure. |
WEPRMI1414 | Client finishes close procedure. |
WEPRMI1415 | Client marks connection as broken for address {0}. |
WEPRMI1416 | Client shuts down broken connection to address {0}. |
WEPRMI1417 | Local connection is closed due to {0}. |
WEPRMI1419 | Closing HA result transmission query {0}. |
WEPRMI1420 | Shutting down remote connection handler with remote connection id {0}. |
WEPRMI1426 | Starting to accept new connections on address {0}. |
WEPRMI1430 | Stopped accepting new connections on address {0}. |
WEPRMI1446 | Re-authentication at remote RTM system finished successfully. |
WEPRMI1697 | Client marks connection as shutting down: {0} |
WEPRMI1698 | Client shuts down connection: {0}, isClosing={1}. |
WEPRMI1699 | Client starts recovering connection to {0}. |
WEPRMI1700 | Client is successfully connected to {0}. |
WEPRMI1701 | Ignored NPE when sending {0} to {1}. |
WEPRMI1724 | {0} (connectable source {1}) |
WEPRMI1733 | Nested exceptions: |
WEPRMI1734 | Combined exceptions |
WEPRMI1785 | Starting RTM system (version={0} built at {1}). |
WEPRMI1945 | TCP/IP communication server is listening on local port {0}. |
WEPRMW0001 | Unable to shut down RTM system's persistence manager. |
WEPRMW0002 | Unable to shut down communication servers. |
WEPRMW0003 | Unable to stop communication server. |
WEPRMW0004 | Unable to stop communication client. |
WEPRMW0005 | Unable to shut down client connection handler. |
WEPRMW0006 | Unable to shut down server connection handler. |
WEPRMW0007 | Unable to connect to high availability partner. |
WEPRMW0008 | Unable to shut down master connection handler. |
WEPRMW0009 | Unable to send for slave health request. |
WEPRMW0010 | Server with older build number {0} connected as slave. |
WEPRMW0011 | Unable to shut down slave connection handler. |
WEPRMW0012 | Unable to send for master health request. |
WEPRMW0017 | Unable to call a task on the decoupled sink adapter. |
WEPRMW0018 | Authentication with remote RTM system contains illegal commands. |
WEPRMW1329 | Caught exception during operator initialization. |
WEPRMW1330 | Caught exception during heartbeat processing from input {0}. |
WEPRMW1331 | Caught exception while closing operator. |
WEPRMW1332 | Caught exception processing done signal from input {0}. |
WEPRMW1333 | Error processing element of index {0}. |
WEPRMW1334 | Caught exception while opening operator. |
WEPRMW1410 | Status of local system is not OK; shutting down! |
WEPRMW1411 | Status of cluster is not OK; shutting down! |
WEPRMW1421 | Received a shutdown notification from HA {0} with HA communication address {1}. |
WEPRMW1422 | Server ({0}) lost connection to HA partner system. |
WEPRMW1423 | Server is shutting down broken connection for address {0} as communication to master has been lost. |
Explanation |
This message appears in the log of an HA slave when it loses its connection to a master that supports remote connections. It indicates why clients will lose their connection to that address. |
Action |
Check other messages to see if the reason for the lost connection can be found. |
WEPRMW1522 | Aborting authentication with remote RTM system. |
WEPRMW1687 | Rule-based optimization failed due to: {0} |
Explanation |
The optimizer has failed optimizing the query and falled back to a non-optimized query. |
WEPRMW1694 | Master identifies himself with different address. Is {0}, not {1}. |
WEPRMW1695 | Still connected to old slave. |
WEPRMW1768 | External Subquery Translation failed. Reason was: {0} |
Explanation |
The user query was optimized but the external subquery translation has failed to translate the logical query graph. This could under the circumstances result in a slower query performance. |
Action |
Try to rewrite the query or contact your local software supplier. |
WEPRMW1777 | Search attribute {0} has been skipped as dynamic indexing is not supported for type {1}. |
WEPRMW1783 | Buffer file ''{0}''could not be deleted: {1}. |
WEPRMW1939 | Unable to expand the explicit sub-query {0} for non-incremental query optimization. |
WEPRMW1940 | BigMemory was not able to execute the Search API query against a cache. |
WEPRMW1946 | Exact average value {0} is not accuratly representable as a double. The BigDecimal representation is {1}. |
WEPRMW1991 | {0} push-down failed as there already is an Aggregation being pushed-down. |