My webMethods Server Messages

ClassPathComponentsMapper.folder.cannot.read Cannot read from folder.
Explanation

Cannot read from file. The file was deleted with no read rights.

Action

Check to see if the file exists and if you have read rights.


ClassPathComponentsMapper.folder.not.exists The folder does not exist:
Explanation

The provided folder does not exist.

Action

You must specify an existing folder.


ClassPathComponentsMapper.folder.not.valid The specified path is not a valid folder.
Explanation

The specified path is not valid folder; it might be a file and not a folder.

Action

Specify a valid folder path.


Error.POP.0.0.001 Error sending mail
Explanation

When a forum message is retracted, an e-mail notification is sent to the configured forum administrator. This error occurs if there are any problems sending this e-mail to the administrator.

Action

Check the My webMethods Server logs for additional information about the specific e-mail failure. It may be caused by the e-mail server not being available, or because of an invalid forum administrator e-mail address. See Check the My webMethods Server logs for more details. See ..\MWS\server\<serverName>\logs


POP.001.0002 A "{0}" occurred with the Message "{1}"
Class E
Explanation

An unexpected error occurred during deployment.

Action

Examine the install.log, and optionally try again. In the log file, look for any information specific to the deployed component.


POP.002.0004 Context is in an invalid state.
Class E
Explanation

The server attempted to use an invalid context object. This error is the result of attempting to use a context object before it has been initialized or after it has been uninitialized.

Action

Always use the provider com.webmethods.portal.bizPolicy.IContextProvider (available through the com.webmethods.portal.system.PortalSystem) to acquire a context object.


POP.002.0005 Unable to locate command: {0}
Class E
Explanation

The requested command is not deployed on the server.

Action

Log in to My webMethods Server and use the Install Administration portlet to deploy the command to the server.


POP.002.0006 Unable to locate biz policy for resource: {0}
Class E
Explanation

The server cannot resolve the business policy for the specified resource because no policy has been registered for the resource type.

Action

Create and register a business policy for the resource type. Consult the My webMethods Server documentation to learn more about business policies.


POP.002.0007 Unknown error encountered while trying to resolve business policy for uri {0}
Class E
Explanation

The server cannot resolve a business policy for specified resource because of an internal error.

Action

Check the _problems_.log in the ..\MWS\server\default\logs directory for more specific error information.


POP.002.0008 Uri is not a valid thingID: {0}
Class E
Explanation

The server cannot invoke the RemoveAcess command on a resource that is not a metadata resource.

Action

Correct the command-invoking source code to specify a metadata resource using either the 'resourceURI' parameter or the context's current resource.


POP.002.0009 Invalid arguments to create Alias command
Class
Explanation

You cannot invoke this command without the required arguments: key and target.

Action

If you invoked this command programatically, review the Javadocs and make the required changes to the invoking code.


POP.002.0010 The arguments are not valid
Class
Explanation

When invoking the alias commands you must supply valid arguments.

Action

If you invoked this command programatically, review the Javadocs and make the required changes to the invoking code.


POP.002.0011 You cannot flush another user's cache
Class
Explanation

Only an Administrator can flush another user's cache.

Action

You must log in to My webMethods Server with Administrator credentials to be able to flush another user's cache.


POP.002.0012 Class group name is not specified
Class E
Explanation

You must specify the groupName parameter when invoking the ReloadClasses command.

Action

Correct the command-invoking code to specify the 'groupName' parameter. The parameter value should be the name of the group's class-loader bundle.


POP.002.0014 Unable to authenticate user: {0}
Class E
Explanation

The server cannot authenticate the user either because the user does not exist or because the user's password is incorrect.

Action

Try again with correct username and password. If necessary, log in to My webMethods or My webMethods Server and use the User Management feature to add the user to the server


POP.002.0016 Error listing directory groups
Class E
Explanation

The server cannot list the groups of a particular directory service, most likely because of a problem connecting to the directory service.

Action

If the directory service is a newly configured directory service, log in to the My webMethods Server and double-check the configuration using the Folders > System > Portlets > Administration > Directory Services Administration portlet. If the directory service is an existing directory service for which groups could be listed previously, validate that the LDAP or ADSI server to which the directory service is connected is up and running properly. Also check that the machine which hosts My webMethods Server is able to connect to the LDAP or ADSI server using the hostname and port specified in the directory service's configuration.


POP.002.0017 Error retrieving template list
Class E
Explanation

The server cannot list directory service templates, because an error occurred loading the templates.

Action

Check the ..\MWS\server\default\logs\_problems_.log file for more specific error information.


POP.002.0018 Error listing users
Class E
Explanation

The server cannot list the users of a particular directory service, most likely because of a problem connecting to the directory service.

Action

If the directory service is a freshly configured directory service, go back to the Portal Admin Dashboard, and double-check the configuration using the Directory Service Administration portlet (in the Portal Configuration category). If the directory service is an existing directory service for which groups could be listed previously, validate that the LDAP or ADSI server to which the directory service is connected is up and running properly. Also check that the machine which hosts the Portal server is able to connect to the LDAP or ADSI server using the hostname and port specified in the directory service's configuration.


POP.002.0019 Error updating directory
Class E
Explanation

The server cannot update the directory service configuration because an error occurred in validating or storing the configuration settings.

Action

Check the ..\MWS\server\default\logs\_problems_.log file for more specific error information.


POP.002.0020 Invalid command ID: {0}
Class
Explanation

The requested command is not found.

Action

Verify that the command has been properly installed. This can be done by logging in to My webMethods Server as sysadmin and viewing the commands in the folder Folders > System > Manager > Commands directory.


POP.002.0021 Cannot resolve install mechanics for: {0}
Class E
Explanation

An error occurred during the installation of a server component.

Action

Look in the ..\MWS\server\default\logs\_problems_.log file for the stack trace of the error. The stack trace may not provide enough detail to say why the error was thrown, but it will show where the error originated.


POP.002.0022 Location is not a folder: {0}
Class
Explanation

When the Install Services commands are instructed to deploy all of the components of a folder, the resource must be a folder and cannot be a file.

Action

Ensure that either the Autodeploy folder is properly configured or that the object passed to the InstallComponents command is a folder.


POP.002.0023 Cannot find folder: {0}
Class
Explanation

When the Install Services commands are instructed to deploy all of the components of a folder, the folder must be available.

Action

Ensure that either the Autodeploy folder is properly configured or that the objecgt passed to the InstallComponents command is an available folder.


POP.002.0025 Command name is not specified
Class E
Explanation

The Ant build file does not contain the command name needed to invoke the ExecuteCommand ant task.

Action

Correct the Ant build file to provide the command name with the 'name' attribute of the ExecuteCommand task.


POP.002.0026 Cannot resolve command [name, type] [{0}, {1}]
Class E
Explanation

The server cannot execute the command by means of an Ant task because the specified command has not been deployed to the server.

Action

Deploy the command specified by the error message.


POP.002.0027 Attribute target is required
Class E
Explanation

The target for invoking the ExecuteTargetLoop Ant task has not been specified.

Action

This error can occur if a developer modifies an Ant build file used to deploy comments to the server. Correct the Ant build file to add a 'target' attribute to the ExecuteTargetLoop task invocation.


POP.002.0028 Cannot create IInitializableComponentData from: {0}
Class E
Explanation

The component configuration data is not one of the following types: xml (serialized XML document), xmlLocation (URL specifying an XML document), properties (serialized properties map), propertiesLocation (URL specifying a properties file location).

Action

Correct the component configuration in the phaseProvider.xml configuration file to specify component configuration data as either xml, xmlLocation, properties, or propertiesLocation.


POP.002.0029 Attribute source is required
Class E
Explanation

The server cannot execute an Ant task because the task requires a source attribute to be specified.

Action

Correct the Ant build file to add a 'src' attribute to RunJavaScript and RunSQLScript tasks. The 'src' attribute must specify the file path to the script to be run.


POP.002.0030 Cannot create IInitializableComponentData from {0} for provider {1}
Class E
Explanation

The server cannot unregister the specified component. The component's configuration data has become corrupted.

Action

Reinstall the component with the Folders > Administrative Folders > Administration Dashboard > Configuration > Install Administration portlet, and then re-try uninstalling the component.


POP.002.0031 Cannot find IComponent using IComponentData {0} in provider {1}
Class
Explanation

An attempt was made to unregister a component that is not currently registered.

Action

No further action is required.


POP.002.0032 Cannot get IComponentData for component {0} from provider {1}
Class E
Explanation

An error occurred during the unregistration of a server component.

Action

Look in the ..\MWS\server\default\logs\_problems_.log file for the stack trace of the error. The stack trace may not provide enough detail to say why the error was thrown, but it will show where the error originated. It is likely that you need to restart the server.


POP.002.0033 Component Provider not found: {0}
Class E
Explanation

The server cannot unregister the component because component data has become corrupted.

Action

Re-install the component with the Folders > Administrative Folders > Administration Dashboard > Configuration > Install Administration portlet, then re-try uninstalling.


POP.002.0034 Attribute descriptorSrc is required
Class E
Explanation

The Ant task does not have skin descriptor content.

Action

Correct the Ant build file to provide skin descriptor content using the 'descriptorSrc' attribute to CreateSkinInstance, GetSkinInfo, and RemoveSkinInstance Ant tasks.


POP.002.0035 Skin name is empty
Class E
Explanation

The server cannot determine the skin name because the skin descriptor does not contain the skin name or because the skin descriptor is improperly structured.

Action

Correct the skin descriptor to include the skin name in the 'name' attribute value of the 'wm_xt_skin' element.


POP.002.0036 Portlet info is not specified
Class E
Explanation

Portlet descriptor content is not included in the GetPortletInfo Ant task.

Action

Correct the Ant build file to provide portlet descriptor content using the 'descriptorSrc' attribute.


POP.002.0037 Portlet name is empty
Class E
Explanation

The server cannot determine the portlet name because the portlet descriptor does not contain the portlet name or because the portlet descriptor is improperly structured.

Action

Correct the portlet descriptor to include the portlet name as the content of the 'name' element.


POP.002.0038 Portlet is not available: {0}
Class E
Explanation

The specified portlet is not deployed on the server.

Action

Use the Folders > Administrative Folders > Administration Dashboard > Configuration > Install Administration portlet to deploy the portlet specified by the error message.


POP.002.0040 Cannot find system folder for the portlet: {0}
Class E
Explanation

An error occurred during installation of a portlet.

Action

Look in the ..\MWS\server\default\logs\_problems_.log file for the stack trace of the error. It may be necessary to reinstall the component.


POP.002.0041 Page have to be a folder type
Class
Explanation

When cloning pages, the source of the cloning operation must be of the appropriate type

Action

Ensure that an appropriate source is used for the cloning operation.


POP.002.0042 Destination container is not a valid thing: {0}
Class E
Explanation

The server cannot clone a remote resource; the resource must be cloned to a metadata destination container.

Action

Correct the command-invoking source code to specify a metadata destination container using the 'destContainerURI' parameter.


POP.002.0043 Source item container is not a valid thing: {0}
Class E
Explanation

The server cannot clone the remote resource; only metadata resources can be cloned.

Action

Correct the command-invoking source code to specify a metadata resource using either the 'resourceURI' parameter or the server context's current resource.


POP.002.0044 Invalid XType: {0}
Class E
Explanation

The server cannot resolve the DBO type of the remote item to be cloned. The most likely reason is that the DBO type has been uninstalled from the system.

Action

Normally, a DBO type cannot be uninstalled from the system until all instances of the type have been deleted. This message may also indicate that a damaged instance of the remote item is still present but cannot be cloned or recovered. No further action can be taken.


POP.002.0046 Item is not a valid thing: {0}
Class E
Explanation

The server cannot invoke the metadata command because the command must be invoked against a metadata resource.

Action

Correct the command-invoking source code to specify a metadata resource using either the 'resourceURI' parameter or the server context's current resource.


POP.002.0047 Can not create an item with an empty name
Class
Explanation

When creating a new resource, a 'name' property is required.

Action

When creating the resource, ensure that a name is supplied.


POP.002.0048 Delete operation failed
Class E
Explanation

The container cannot be deleted because at least one of the items in the container cannot be deleted. Refer to the the list of contained items that cannot be deleted, displayed in the user interface along with this message.

Action

Manually delete the specified undeletable contained items individually. This may result in more detailed information as to why the items cannot be deleted.


POP.002.0049 Error obtaining owned folder
Class E
Explanation

The server cannot obtain the owned folder because of an internal server error.

Action

Check the ..\MWS\server\default\logs\_problems_.log file for more specific error information.


POP.002.0050 Cannot get current resource uri
Class E
Explanation

Cannot invoke the portlet command because a target portlet for the command is not specified.

Action

Correct the command-invoking code to specify the portlet with the 'resourceURI' parameter or with the server context's current resource.


POP.002.0051 ResourceURI is not specified
Class E
Explanation

The server cannot invoke the portlet command because a target portlet for the command is not specified.

Action

Correct the command-invoking source code to specify the portlet with the 'resourceURI' parameter or with the server context's current resource.


POP.002.0052 PortletBean is not ICommandBean
Class E
Explanation

The command cannot be invoked against the portlet because the portlet's portlet-bean does not implement the com.webmethods.portal.bizPolicy.command.ICommandBean interface.

Action

Modify portlet's portlet-bean source code to make the portlet-bean implement ICommandBean. Rebuild and redeploy the portlet.


POP.002.0053 UserID is not of type IThingID or String
Class E
Explanation

The command was invoked using RMI with an inappropriate userID data type. This error is usually a result of a bug in the command-invoking code.

Action

Correct the command-invoking code to ensure it invokes the command with a userID specified either as a java.lang.String or a com.portal.webmethods.meta2.thing.IThingID object.


POP.002.0054 Search library not found: {0}.
Class E
Explanation

An attempt was made to delete a search library that does not exist.

Action

Log in to My webMethods Server and use the Search Administration portlet to check the name of the search library against the available libraries.


POP.002.0056 Saved Searches folder not found.
Class E
Explanation

The server cannot save a search because the user's saved-searches folder does not exist.

Action

User folders such as the user's saved-searches folder are created automatically for users when they login to My webMethods Server. Try logging out as the user, and then logging in again.


POP.002.0057 No name parameter found
Class E
Explanation

The server cannot invoke the save-search command name; the command does not specify a name parameter.

Action

Correct the command-invoking source code to specify a 'name' parameter.


POP.002.0058 Not a valid skin: {0}
Class E
Explanation

The server cannot invoke the ReloadSkin command; the specified skin identifier does not identify a valid skin.

Action

Correct the command-invoking source code to specify a valid skin resource using the 'skin' parameter.


POP.002.0059 Default xmlimport requires an IThingID for the parent: {0}
Class E
Explanation

The server cannot import a metadata resource using xmlImport unless the parent of the resource is also a metadata resource.

Action

Correct the xmlImport file to move or remove elements contained by the element specified by the error message.


POP.002.0060 Default xmlimport requires the parent to be a container: {0}
Class
Explanation

When executing an XML import script, every new child must be created within a valid container.

Action

Check the script to ensure that each created item has a valid parent.


POP.002.0061 Unable to locate acl for aclName: {0}
Class E
Explanation

The server cannot modify the access control list (ACL) for a resource specified in xmlImport because the access control list was referenced by an alias that does not exist.

Action

Correct the xmlImport file to replace the 'aclName' attribute value specified by the error message with a valid value.


POP.002.0062 Unable to find value for acl
Class E
Explanation

The server cannot create an access control entry using xmlImport because the ACL element requires a value attribute.

Action

Correct the xmlImport file to add a 'value' attribute to the 'acl' elements. The 'value' attribute values must contain one of the following My webMethods Server access right names (comma separated): READ, CREATE_ITEM, CREATE_CONTAINER, MODIFY, DELETE, PORTLET_MODIFY_PROPERTIES_INSTANCE, PORTLET_MODIFY_PROPERTIES_USER, ALL.


POP.002.0063 Unable to find ace value for: {0}
Class E
Explanation

The server cannot create access an control entry using xmlImport because the xmlImport entry references an unknown right value.

Action

Correct the xmlImport file to add a 'value' attribute to the 'acl' elements. The 'value' attribute values must contain one of the following My webMethods Server access right names (comma separated): READ, CREATE_ITEM, CREATE_CONTAINER, MODIFY, DELETE, PORTLET_MODIFY_PROPERTIES_INSTANCE, PORTLET_MODIFY_PROPERTIES_USER, ALL.


POP.002.0064 Unable to find alias name to set the acl
Class
Explanation

The required argument 'value' was not set on this xmlimport element.

Action

Ensure that the ACL element has a 'value' attribute


POP.002.0065 Alias attribute missing on context node
Class E
Explanation

The server cannot establish the resource context during xmlImport because the context element requires an alias attribute.

Action

Correct the xmlImport file to add an 'alias' attribute to 'context' elements. The alias attribute value must contain the name of a valid alias; elements enclosed by the context apply to the resource identified by this alias.


POP.002.0069 Root users folder not found
Class S
Explanation

The server cannot create the user's home folder because the server users folder does not exist.

Action

Create a new server folder, and set its alias to 'folder.users'.


POP.002.0076 The basic update properties requires a thingID: {0}
Class E
Explanation

The server cannot invoke the ImportFiles command because it does not specify a target folder for the import.

Action

Correct the command-invoking source code to specify a folder using either the 'resourceURI' parameter or the server context's current resource.


POP.002.0077 Adding to version control requires a thingID: {0}
Class E
Explanation

The server cannot invoke the version-control command without specifying a versionable resource.

Action

Correct the command-invoking source code to specify a versionable resource using either the 'resourceURI' parameter or the server context's current resource.


POP.002.0078 The resource does not support IVersionableMechanics: {0}
Class E
Explanation

The server cannot invoke the version-control command on the resource because the resource is not versionable.

Action

Do not invoke the AddToVersion command against resources that are not versionable. Only server folders and server content items are versionable.


POP.002.0079 Command requires a thingID: {0}
Class E
Explanation

The server cannot invoke the version-control command without specifying a versionable resource.

Action

Correct the command-invoking source code to specify a versionable resource using either the 'resourceURI' parameter or the server context's current resource.


POP.002.0080 Invalid version Uri: {0}
Class E
Explanation

The server cannot display the server version information of an item because the identifier used to specify the version is not a valid version identifier.

Action

Correct the source code that invokes the ViewVersion command to provide a valid version identifier.


POP.002.0081 Invalid thing ID: {0}
Class E
Explanation

The server cannot display the server version information of an item because the identifier used to specify the item does not identify a valid resource

Action

Correct the command-invoking source code to provide a valid versioned-item identifier for the 'targetURI' parameter.


POP.002.0082 User {0} don't have rights to view {1}
Class
Explanation

The current user failed the permissions check to see a particular version of an item.

Action

Check the permissions on that item.


POP.002.0083 Could not acquire context, principal data not found on session
Class E
Explanation

The server cannot create a server context for the specified javax.servlet.http.HttpSession because the HttpSession has not been initialized with the necessary server session data.

Action

Restart My webMethods Server.


POP.002.0085 Can't create subscription for non Thing: {0}
Class E
Explanation

The server cannot create a subscription from xmlImport data because subscriptions are supported only for metadata resources.

Action

Correct the xmlImport file to remove 'subscription' elements from non-metadata resource contexts. The best way to determine specifically which subscription elements in the xmlImport file are causing this error is the trial-and-error approach: remove each subscription element in the xmlImport file one by one and then try re-importing from the xmlImport file.


POP.002.0086 Unable to import xml. No uid.
Class E
Explanation

An attempt to create an access control entry or subscription using xmlimport did not specify the user ID of the My webMethods Server user or group.

Action

Correct the xmlImport file to add a 'uid' attribute to 'subscription' and 'ace' elements. The 'uid' attribute value must contain the user ID (LDAP user ID) of a valid My webMethods Server user or the cn (LDAP group ID) of a valid My webMethods Server group.


POP.002.0087 Unable to import xml. Could not acquire uri for uid: {0}
Class W
Explanation

The user referenced in the xmlImport file does not exist on My webMethods Server.

Action

Log in to My webMethods or My webMethods Server with appropriate permissions and add the user, or change the xmlImport file.


POP.002.0089 Unable to import subscription. No value specified for 'deliveryMode'.
Class E
Explanation

The server cannot create a subscription from xmlImport data because the subscription element requires a deliveryMode attribute. This error is caused by importing from an improperly constructed xmlImport file.

Action

Correct the xmlImport file by adding a 'deliveryMode' attribute to 'subscription' elements. The valid value for 'deliveryMode' attribute is "email", indicating notifications for this subscription are to be delivered to the user's e-mail address.


POP.002.0090 Unable to import subscription. No value specified for 'criteria'.
Class E
Explanation

The server cannot create the subscription from xmlImport data because the subscription element requires a criteria attribute that contains the name of at least one criterion valid for the type of resource subscribed to.

Action

Correct the 'subscription' elements in the xmlImport file so that they all contain valid 'criteria' attribute values. Valid values are not empty; they must contain a comma-separated list of criterion names. The criterion names for basic folders are: 'added', 'removed', 'modified', 'deleted', and 'moved'. The criterion names for basic links, forms, portlets, and content items are 'modified', 'deleted', and 'moved'. Custom DBO types may have additional criteria.


POP.002.0091 No matching criteria found for type: {0} and for criteria: {1}.
Class E
Explanation

The server cannot create a subscription from xmlImport data because the subscription element requires a criteria attribute that contains the name of at least one criterion valid for the type of resource subscribed to.

Action

Correct the xmlImport file so that 'subscription' elements contained by any element of the type specified by the error message's resource-typeName have valid 'criteria' attribute values. Valid values are not empty; they must contain a comma-separated list of criterion names. The criterion names for basic folders are: 'added', 'removed', 'modified', 'deleted', and 'moved'. The criterion names for basic links, forms, portlets, and content items are 'modified', 'deleted', and 'moved'. Custom DBO types may have additional criteria.


POP.002.0092 Can't set ace for non Thing: {0}
Class E
Explanation

The server cannot modify the access control entry (ACE) for a resource specified in xmlImport because the resource does not support My webMethods Server access control entries.

Action

Correct the xmlImport file to remove the 'ace' element for the resource specified by the error message.


POP.002.0093 Unable to locate alias for: {0}
Class E
Explanation

The server cannot establish the resource context during xmlImport because the alias specified for the context does not exist.

Action

Log in to My webMethods Server and use the Alias Management portlet to create the alias specified by the error ,message or fix the xmlImport file to use an alias that does exist. To fix the xmlImport file, locate the alias attribute with the value specified by the error message and replace that value with the name of an existing alias.


POP.002.0095 Unable to create alias: {0} because it already exists.
Class
Explanation

The command failed because an alias of the same name has already been registered.

Action

Either apply a different name to the new alias or modify the existing alias that uses the same name.


POP.002.0096 Mechanics is not an IBasicMechanics
Class E
Explanation

The server cannot use xmlImport to update the properties of a resource that is not a metadata resource.

Action

Correct the xmlImport file to not update the properties of non-metadata resources. The best way to determine the element in the xmlImport file that is causing this error is the trial-and-error approach: remove each element in the xmlImport file one-by-one and then try re-importing from the xmlImport file.


POP.002.0097 Unable to complete import because type: {0} doesn't exist.
Class E
Explanation

The server cannot import a resource specified in xmlImport because the resource is an instance of a DBO that is not currently deployed in My webMethods Server.

Action

Deploy the DBO specified by the error message and then rerun the xmlImport.


POP.002.0098 Role xmlimport requires attributes of 'roleProvider' and 'name'
Class
Explanation

When creating a new role using an xmlImport script, the attributes must be available.

Action

Modify the xmlimport script to include the required 'roleProvider' and 'name' properties.


POP.002.0099 Role xmlimport unable to locate roleProvider: {0}
Class
Explanation

The type of role is not registered on the current system.

Action

Check the 'roleProvider' attribute to make sure it is correct.


POP.002.0103 Failed to set Alias {0} for resource {1}.
Class
Explanation

The system failed to correctly set an alias during the xmlimport.

Action

Check the server logs at ..\MWS\server\default\logs for any additional exceptions that occurred during the import.


POP.002.0105 Failed to load xml document from {0}
Class
Explanation

The XML file specified for the xmlimport script is either not found or not well-formed.

Action

Verify that the XML file exists in the specified location and that the contents of the file are valid XML.


POP.002.0107 Failed to invoke remote command: {0}. Original error message: {1}
Class
Explanation

A problem occured when executing a command on a remote server.

Action

Check the logs on the remote server for additional information.


POP.002.0108 User UID can not be found in MWS directories: {0}
Explanation

No user is found with the specific user ID.

Action

Specify a valid user ID.


POP.002.0110 You have insuffient privileges to impersonate other users.
Explanation

You have insufficient privileges to impersonate other users.

Action

The log file indicates how to grant user impersonate privileges. Contact a system administrator if you need such privileges.


POP.002.0111 Illegal Argument: Command result may not be serialized.
Explanation

The command result cannot be serialized.

Action

Make sure the command result can be serialized.


POP.002.0113 The parent of the task is already completed
Explanation

You cannot create a new child task if its parent task has been completed.

Action

Contact the parent task owner to determine how to handle the additional work.


POP.002.0114 User {0} does not have the functional privilege to delegate task {1}
Explanation

The user has not been granted the functional privilege to delegate the task.

Action

Please contact the system administrator if you need such privileges.


POP.002.0118 Thing with name "{0}" for locale "{1}" already exists in "{2}". Unable to rename "{3}"

POP.003.0003 No access model specified in property "{0}".
Class S
Explanation

The framework.access.model system property does not specify an access model.

Action

Update the portal.properties file to specify framework.access.model property value. The choices are permissive or restrictive.


POP.003.0004 Unable to register principal types: "{0}".
Class S
Explanation

The system directory is corrupted.

Action

Restore the underlying system user directory content from a backup or manually restore the user directory. In the case of LDAPd, you can reinstall the LDAPd server using the webMethods Installer.


POP.003.0005 Unable to register search service: "{0}".
Class S
Explanation

An error occurred in registering a new search service.

Action

You might need to reinstall My webMethods Server.


POP.003.0006 Error initializing content service: "{0}".
Class S
Explanation

The content service cannot be initialized.

Action

Check the Content Service Administration portlet to verify that the content service is properly configured.


POP.003.0007 Cannot list roles, directory service "{0}" not found.
Class E
Explanation

The directory service cannot be found.

Action

Check the Directory Service Administration portlet to verify that the directory service is properly configured and functional.


POP.003.0008 Could not locate system directory: "{0}".
Class E
Explanation

The server cannot find the system user directory.

Action

Verify that the system directory is present in Directory Services Administration portlet, and that it is configured and functional.


POP.003.0009 Error setting system directory: "{0}".
Class E
Explanation

The command failed to change the system directory service.

Action

Do not attempt to change the system directory.


POP.003.0012 "{0}" does not have permission to modify the Administrators group.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu to open the Permissions portlet to give the user access rights.


POP.003.0013 "{0}" does not have permission to modify the directory configuration.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu to open the Permissions portlet to give the user access rights.


POP.003.0014 Cannot update directory config, domain not found: "{0}".
Class E
Explanation

An attempt was mademto update the config information for a directory service using an invalid domain name.

Action

Use a valid domain name.


POP.003.0015 Cannot update directory config, Administrator user not found: "{0}".
Class S
Explanation

The system directory or the database is corrupted.

Action

Restore the underlying system user directory content from a backup or do so manually. If LDAPd, you can reinstall the LDAPd server using the webMethods Installer.


POP.003.0016 Cannot update directory config, Everyone group not found: "{0}".
Class E
Explanation

The system directory does not have an everyone group or the directory is corrupted.

Action

Restore the underlying system user directory content from a backup or do so manually. In the case of LDAPd, you can reinstall the LDAPd server using the webMethods Installer.


POP.003.0017 Cannot update directory config, Guest user not found: "{0}".
Class S
Explanation

The system directory is corrupted.

Action

Restore the underlying system user directory content from a backup or do so manually. In the case of LDAPd, you can reinstall the LDAPd server using the webMethods Installer.


POP.003.0018 Cannot remove the system directory.
Class E
Explanation

The system directory services cannot be removed.

Action

Do not try to remove the system directory.


POP.003.0021 System directory does not have Administrator user.
Class E
Explanation

The LDAP user store is missing the administrator user.

Action

Add a user to the system LDAP user store whose UID matches the Portal Administrator UID. This should only be necessary if the LDAP user store has become corrupted or the PortalAdmin user has been removed.


POP.003.0022 System directory does not have Everyone group. Everyone group access will not be available.
Class S
Explanation

The system directory is corrupted.

Action

Restore or create the everyone group in the system directory. Use the directory's administration UI or tools for that purpose.


POP.003.0023 System directory does not have Guest user. Guest access will not be available.
Class E
Explanation

The system directory does not have a guest user or it is corrupted.

Action

Restore the underlying system user directory content from a backup or do so manually. In the case of LDAPd, you can reinstall the LDAPd server using the webMethods Installer.


POP.003.0024 The type "{0}" is either 'disabled' or not deployed to this MWS cluster node. Please contact the My webMethods Server Administrator.
Class W
Explanation

An attempt was made to view a portlet for which the status has been set to disabled.

Action

Use the Manage Components portlet in the Administration Dashboard to change the status of the portlet type.


POP.003.0025 {0} cannot view the content of {1}.
Class W
Explanation

The user is denied access to view a portlet item

Action

Use the Permissions page to set the authentication scheme for the item to one of the installed authentication schemes.


POP.003.0026 {0} cannot list the shortcuts to {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0027 {0} cannot list the notes for {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0028 {0} cannot view the access list for {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0029 {0} cannot view the authentication scheme for {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0030 {0} cannot create an item of type {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open up the Permissions portlet to give the user access rights.


POP.003.0031 {0} cannot update the content of {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0032 {0} cannot add the note for {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0033 {0} cannot remove the note for {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0034 {0} cannot update the properties of {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0035 {0} cannot delete {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0037 {0} cannot destroy {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0038 {0} cannot store content {1}.
Class
Explanation

An attempt was made to store a document on a type that does not support document storage

Action

Ensure that content is stored on document types


POP.003.0039 {0} cannot contain a duplicate reference to {1}.
Class W
Explanation

You cannot create items with the same name under the same folder.

Action

When naming items in a folder, make sure each item uses a name that is unique within the folder.


POP.003.0040 Cannot uninstall "{0}" because it has "{1}" published instances. Please delete them first and try again.
Class W
Explanation

The DBO cannot be uninstalled because it has published instances.

Action

Manually delete all published instances of this DBO and try to uninstall it again. You can use Publish History portlet to help you find all published instances.


POP.003.0044 {0} is checked out.
Class W
Explanation

The item cannot be checked out because it is already checked out.

Action

Wait until the item is checked in and try again.


POP.003.0045 {0} is not versioned.
Class W
Explanation

The item is not versioned.

Action

Add the item to version control using the item's local menu.


POP.003.0046 {0} cannot view version number of {1}.
Class
Explanation

An attempt was made to view a version of a document that failed a permissions check

Action

Verify that the current user has sufficient permissions


POP.003.0047 {0} cannot list the versions of {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0048 {0} cannot add to versioning {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0049 {0} cannot remove from versioning {1}.
Class
Explanation

An attempt was made to remove a version from version control that failed a permissions check

Action

Verify that the current user has sufficient permissions


POP.003.0050 {0} is checked out by {1}.
Class W
Explanation

The item is already checked out.

Action

Wait until the item is checked in and before trying to check out.


POP.003.0051 {0} cannot set the current version of {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0052 {0} cannot publish a version of {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0053 {0} cannot check out {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0054 {0} is not checked out.
Class W
Explanation

You cannot check the item in because it is not checked out.

Action

Do not attempt to check in an item that was not checked out.


POP.003.0055 {0} cannot check in {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0056 {0} cannot undo the check out of {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's 'rmissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0057 Source branch is not found: "{0}".
Class E
Explanation

The server cannot find a source version branch for this object.

Action

Do not try to add this object to version control.


POP.003.0058 Destination branch is not found: "{0}".
Class
Explanation

Version control system was unable to create a new branch required to complete the add to versioning command.

Action

Check the logs for additional information such as out of disk space.


POP.003.0059 {0} cannot be added to versioning because parent is null.
Class W
Explanation

The item is invalid because it does not have a parent.

Action

Use the local item menu to delete the item.


POP.003.0060 Not initialized: call init(PageData) first.
Class W
Explanation

An internal error has occurred.

Action

Try the operation again.


POP.003.0061 Column must be contained by a row.
Class W
Explanation

The page data xml is not valid. The column element must reside inside a row element.

Action

If you are using My webMethods Server when you got this message, the My webMethods Server page data has been corrupted. Try editing and then saving the page. If you cannot load the page into the page editor you need to delete the page and then recreate it.


POP.003.0062 Property must be contained by a portlet.
Class E
Explanation

The page data xml is not valid. The property element must be inside portlet element.

Action

If you are using My webMethods Server when you got this message, the My webMethods Server page data has been corrupted. Try to edit and then save the page. If you cannot load the page into the page editor you need to delete the page and then recreate it.


POP.003.0063 Portlet must contain 'uri' attribute.
Class E
Explanation

The page data xml file is not valid. The portlet definition does not have an URI attribute.

Action

If you are using My webMethods Server when you got this message, the My webMethods Server page data has been corrupted. Try to edit and then save the page. If you cannot load the page into the page editor you need to delete the page and then recreate it.


POP.003.0064 Property must contain 'name' attribute.
Class W
Explanation

The page data xml is not valid. The property element must have a name attribute.

Action

If you are using My webMethods Server when you got this message, the My webMethods Server page data has been corrupted. Try to edit and then save the page. If you cannot load the page into the page editor you need to delete the page and then recreate it.


POP.003.0065 Wiring must be contained by a portlet.
Class E
Explanation

The page data xml is not valid. The property element must reside inside the portlet element.

Action

If you are using My webMethods Server when you got this message, the My webMethods Server page data has been corrupted. Try to edit and then save the page. If you cannot load the page into the page editor you need to delete the page and then recreate it.


POP.003.0066 Wiring must contain 'name' attribute.
Class W
Explanation

The page data xml is not valid. The wiring element must have a name attribute.

Action

If you are using My webMethods Server when you got this message, the My webMethods Server page data has been corrupted. Try to edit and then save the page. If you cannot load the page into the page editor you need to delete the page and then recreate it.


POP.003.0067 Wiring must contain 'portlet' attribute.
Class E
Explanation

The page data xml file is not valid. The wiring definition does not have a portlet attribute.

Action

If you are using My webMethods Server when you got this message, the My webMethods Server page data has been corrupted. Try to edit and then save the page. If you cannot load the page into the page editor you need to delete the page and then recreate it.


POP.003.0069 The content service "{0}" is not available. Please contact the My webMethods Server Administrator.
Class E
Explanation

The server failed to update the contents of a file that was saved to My webMethods Server.

Action

Verify that the location for the My webMethods Server content repository exists.


POP.003.0070 "{0}" is not editable as it does not exist in a sandbox.
Class
Explanation

An invalid attempt to check in a versioned item was made.

Action

Check out a new version and the the item check in.


POP.003.0071 Cannot lookup install service: "{0}".
Class E
Explanation

The server cannot find the install service for this component.

Action

The component is not supported.


POP.003.0072 ComponentUri is not a thingID: "{0}".
Class E
Explanation

The server cannot determine the location of the installed component based on the passed URI.

Action

Correct the calling code to specify a thingID as the componentUri parameter of the uninstallComponent command.


POP.003.0073 {0} cannot install component.
Class E
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0074 {0} cannot read search service.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0075 {0} cannot set access entries on {1}.
Class
Explanation

An attempt was made to set permissions which failed a permissions check

Action

Ensure the current user has sufficient permissions to edit the permissions on the current object


POP.003.0076 {0} cannot remove access entries from {1}.
Class W
Explanation

The specified user cannot remove entries from the access control list of the specified item.

Action

Grant the user the rights to perform the operation, or have the operation performed by a different user with permission to change the access control list of the target item.


POP.003.0077 {0} cannot set the authentication scheme of {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0078 {0} cannot set the owner of {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0079 Internal error. Access right lengths do not match.
Class E
Explanation

Internal error. A database API inconsistency exists.

Action

Use the Manage Components portlet to edit permissions for this My webMethods Server object.


POP.003.0080 No auth scheme for auth Level: "{0}".
Class W
Explanation

The authentication scheme might not be installed yet, or the specified authentication level is not valid.

Action

Install the missing authentication scheme wm_<schema>Auth.cdp component or correct the authLevel attribute value of your custom xmlImport.xml file.


POP.003.0081 No implementation for auth scheme: "{0}".
Class E
Explanation

The authentication scheme for the target My webMethods Server item is invalid.

Action

Use the Permissions page to set the authentication scheme for the item to one of the installed authentication schemes.


POP.003.0082 {0} cannot list the contents of {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0083 {0} cannot add an item to {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0084 {0} cannot add a shortcut to {1}.
Class W
Explanation

Most likely user does not have appropriate access rights.E145

Action

Give the user access rights.


POP.003.0085 {0} cannot remove an item from {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open Permissions portlet to give the user access rights.


POP.003.0086 {0} cannot remove a shortcut from {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0087 You cannot copy this container into a descendant of itself.
Class
Explanation

A paste operation was attempted inside the source container.

Action

Paste the clipboard contents into an external container.


POP.003.0088 You cannot move this container into a descendant of itself.
Class W
Explanation

The folder cannot move into one of its subfolders.

Action

If you need to move the folder, do not attempt to move it into a subfolder of itself.


POP.003.0090 {0} cannot contain a duplicate name.
Class W
Explanation

The folder or page cannot have items with duplicate names.

Action

When naming items in a folder, make sure each item has a name that is unique within the folder.


POP.003.0091 Unable to create xtype with null name: "{0}".
Class E
Explanation

The xtype id passed into the createChild command is not valid.

Action

Pass a valid xtype id parameter value. The valid values are listed in the tblXTypes tables.


POP.003.0092 {0} is a reserved folder and cannot be modified.
Class W
Explanation

The folder is a system folder and cannot be modified.

Action

Do not try to modify a system folder.


POP.003.0093 You cannot move a reserved item.
Class W
Explanation

The item is reserved and cannot be moved.

Action

Do not attempt to move reserved items.


POP.003.0094 {0} is a reserved folder and can not be versioned.
Class W
Explanation

The folder cannot be added to the version control because it is a special folder type.

Action

Do not try to add this folder to version control.


POP.003.0095 {0} cannot change the columns of {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0096 {0} cannot move portlet {1}.
Class
Explanation

An attempt to move a portlet failed a permissions check

Action

Verify that the current user has sufficient permissions


POP.003.0097 {0} cannot minimize portlet {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0099 {0} cannot view this item.
Class W
Explanation

The user attempted to view an item but does not have permission to see it.

Action

The My webMethods Server administrator should use the Manage Components portlet to edit permissions for this My webMethods Server object.


POP.003.0102 Unable to locate: "{0}".
Class W
Explanation

The server cannot find the user in the directory.

Action

The user might have been removed from the directory. Determine if this user belongs in the directory.


POP.003.0103 Unable to locate: "{0}" invalid type.
Class W
Explanation

The directory might be corrupted or improperly configured.

Action

Check the Directory Service Administration portlet to verify that the directory service is properly configured and functional.


POP.003.0104 {0} cannot modify user.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0105 Cannot modify attribute on principal, {0} not found.
Class W
Explanation

The server cannot find the user in the directory.

Action

The user might have been removed from the directory. Determine if this user belongs in the directory.


POP.003.0106 Cannot set email address on principal, email address attribute not configured properly.
Class W
Explanation

The email attribute is not configured for this user directory.

Action

Update the directory configuration in Directory Service Administration portlet to specify an email attribute name and try again.


POP.003.0107 {0} cannot create an alias.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0108 Alias not found: "{0}".
Class W
Explanation

An attempt was made to remove an alias that does not exist.

Action

Verify that the remove alias call uses an existing alias name.


POP.003.0109 {0} cannot delete the "{2}" alias.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0110 Internal ScheduleMechanics error.
Class E
Explanation

The paging cookie is invalid.

Action

Close the browser, then open it again, and retry the action.


POP.003.0111 {0} cannot view the subscription of {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0112 {0} cannot list the subscriptions to {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0113 {0} cannot edit the subscription to {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0115 Cannot create cookie for URI: "{0}".
Class W
Explanation

The system directory or the database is corrupted.

Action

Restore the underlying system user directory content from a backup or do so manually. In the case of LDAPd, you can reinstall the LDAPd server using the webMethods Installer.


POP.003.0116 User page size must be >= 0 (zero indicates default).
Class W
Explanation

The page size cannot be negative.

Action

Correct the calling code to pass the pageSize parameter as a positive number.


POP.003.0117 Cannot set password on user, user not found: "{0}".
Class W
Explanation

The system directory or the database is corrupted.

Action

Restore the underlying system user directory content from a backup or do so manually. In the case of LDAPd, you can reinstall the LDAPd server using the webMethods Installer.


POP.003.0118 Cannot get roles for user, user not found: "{0}".
Class E
Explanation

The server cannot find the user in the directory.

Action

The user might have been removed from the directory. Determine if this user belongs in the directory.


POP.003.0119 Unable to locate mechanics: "{0}".
Class E
Explanation

Mechanics were not found for the given name or URI.

Action

If the error is related to a standard portlet, try to redeploy the portlet using the Install Administration portlet. If you have created a custom portlet, you need to correct the calling code in CAF and redeploy the portlet.


POP.003.0120 {0} cannot cut {1}.
Class W
Explanation

The user does not have appropriate access rights.

Action

Use the item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0121 {0} cannot cut {1}.
Class W
Explanation

The user does not have the appropriate access rights.

Action

Use the item's Permissions local menu item to open the Permissions portlet to give the user access rights.


POP.003.0122 A datasource named "{0}" already exists.
Class W
Explanation

An attempt was made to register a SQL datasource with a datasource name that has already been used for another datasource.

Action

Use a different name for the new datasource.


POP.003.0123 You cannot copy a reserved item.
Class W
Explanation

The item is reserved.

Action

Do not attempt to copy a reserved item.


POP.003.0124 {0} cannot access datasource.
Class
Explanation

An attempt to issue a SQL statement was made with an invalid argument for the datasource

Action

Ensure that the datasource is registered


POP.003.0126 compression not allowed.
Class W
Explanation

The presentation cache content cannot be compressed.

Action

Correct the calling code to not call PresentationCacheContent.setCompressed(true).


POP.003.0129 Cannot initialize principal, invalid type: "{0}".
Class W
Explanation

The directory might be corrupted or improperly configured

Action

Check the Directory Service Administration portlet to verify that the directory service is properly configured and functional.


POP.003.0130 Error in thread resyncing group properties [domain]: "{0}".
Class E
Explanation

The server failed to refresh the metadata for a Group from the LDAP server.

Action

Validate the connectivity to the LDAP server using an LDAP browser tool, the directory native Administration UI, or other tools.


POP.003.0132 "{0}" depends on "{1}".
Class
Explanation

During the wiring resolution phase an error occurred

Action

Check the wiring configuration for the portlets on the current page.


POP.003.0134 {0}'s account has been disabled.
Class W
Explanation

The user account has been disabled.

Action

Enable the user account in the underlying user directory. Use the directory Administration UI or other tools for that purpose.


POP.003.0135 Unable to find the content location for: "{0}". Content service is not available or out of sync with the database. Please try again. If the problem persists, contact the My webMethods Server Administrator.
Class W
Explanation

The content store is corrupted.

Action

Delete the item and try again.


POP.003.0136 Cannot install component "{0}" because it requires "{1}" to be installed first.
Class W
Explanation

The component being installed depends on another component that is not yet installed and not listed in the items to install list.

Action

Install the required components before attempting to install the component that raised the error.


POP.003.0137 Unable to create with unknown type: "{0}".
Class W
Explanation

Cannot create an item because the xtype is invalid.

Action

Pass a valid xtype parameter to createChild command. All valid xtypes are found in the XTypes system folder in the My webMethods Server UI.


POP.003.0139 Component "{0}" installation failed. System state is recovered by uninstalling the component. Original error: {1}
Class W
Explanation

The installation of the component failed.

Action

Uninstall the component to recover the system state. Look at the install.log file for details of why the installation failed.


POP.003.0140 Component "{0}" installation failed. System state is recovered by reinstalling the previous version of the component. Original error: {1}"
Class E
Explanation

The installation of the component failed.

Action

Uninstall the component to recover the system state. Look at the install.log file for details of why the installation failed.


POP.003.0141 The username/password you entered is invalid.
Class
Explanation

The login attempt failed.

Action

Verify that the username and password are correct.


POP.003.0142 Invalid principal type: "{0}".
Class
Explanation

An attempt to modify a group's membership failed.

Action

Verify that the group exists prior to attempting to modify the group.


POP.003.0143 {0} cannot set policy on {1}.
Class
Explanation

An attempt was made to add an item to a Security Realm failed a permissions check.

Action

Verify that the current user has sufficient permissions.


POP.003.0144 {0} cannot remove policy from {1}.
Class
Explanation

An attempt to remove an item from a Security Realm failed a permissions check.

Action

Verify that the current user has sufficient permissions.


POP.003.0146 {0} cannot modify the members of group: {1}
Class
Explanation

An attempt to modify the members of group failed a permissions check.

Action

Verify that the current user has sufficient permissions.


POP.003.0147 {0} cannot modify the membership of principal: {1}
Class
Explanation

An attempt to modify the groups and roles a principal belongs to failed a permissions check.

Action

Verify that the current user has sufficient permissions.


POP.003.0148 Command Error, Parent is not a container. Class= {0}
Class
Explanation

An attempt was made to create a new item inside a parent that is not a valid container.

Action

Ensure that the attempt is made to create a child inside a valid container.


POP.003.0150 {0} cannot create users or groups in the "{1}" directory service."
Class
Explanation

An attempt was made to create a user or group failed a permissions check.

Action

Verify that the current user has sufficient permissions.


POP.003.0151 {0} cannot modify the members of role: {1}
Class
Explanation

An attempt to modify the members of a role failed a permissions check.

Action

Verify that the current user has sufficient permissions.


POP.003.0153 {0} cannot add a {2} to {1}.
Class
Explanation

An attempt to create a new child failed a permissions check.

Action

Verify that the current user has sufficient permissions.


POP.003.0154 {0} cannot remove a {2} from {1}.
Class
Explanation

An attempt to remove a child from a folder failed a permissions check.

Action

Verify that the current user has sufficient permissions.


POP.003.0155 My webMethods Server webspace {0} should have an valid alias
Class
Explanation

Webspaces must have a valid name in order to be created.

Action

Ensure that a valid alias name is supplied.


POP.003.0156 Unclosed skin property: "{1}". Please close with "].
Class
Explanation

During the dynamic skin property resolution, a malformed skin property was referenced.

Action

Ensure that the javaScript file with the dynamic skin property is properly formed.


POP.003.0160 Failed to resolve wiring for property "{0}"
Class E
Explanation

Wiring cannot be resolved for the <propertyName> property of a portlet instance.

Action

Open the Wiring settings for this portlet, make sure the source portlet and its property are still available. Adjust the wiring settings if necessary.


POP.003.0162 A group cannot be a member of itself.
Class
Explanation

A malformed attempt to modify a group was made.

Action

Do not set a group as a member of itself.


POP.003.0163 Invalid username or Password.
Explanation

The username or password is invalid.

Action

Specify a valid username and password.


POP.003.0164 {0} cannot copy {1}.
Explanation

The user does not have the privilege to copy.

Action

Please contact the system administrator if you need this privilege.


POP.003.0165 {0} cannot clone {1}.
Explanation

The user does not have the privilege to clone.

Action

Please contact the system administrator if you need this privilege.


POP.003.0166 {0} is a system component. And will not be uninstalled.
Explanation

System components cannot be uninstalled.

Action

Do not attempt to uninstall a system component.


POP.003.0167 Too many failed login attempts for: "{0}". You may try to login again in {1} minutes.
Explanation

The user is not allowed to login because of too many failed login attempts. The user must wait a specified amount of time before trying again.

Action

Make sure you are using a valid username and password. Contact the system administrator if your existing credentials are not working.


POP.003.0168 Password has expired for: "{0}". Please contact an administrator to reset your password.
Explanation

The user's password has expired.

Action

Contact an administrator to reset your password.


POP.003.0169 {0} is reserved and cannot be used for an alias.
Explanation

The specified name is reserved by the system and cannot be used for an alias name.

Action

Specify a differnt name as an alias.


POP.003.0171 The uploaded file type is not allowed. The allowed file extensions are: {0}
Explanation

The uploaded file type is not supported by the system.

Action

Be sure to upload only supported file types.


POP.004.0001 The Resource Bundle for "{0}" was not found.
Class E
Explanation

The server cannot load the specified resource bundle class. The bundle is a portlet class that has not been deployed or was deployed in a different portlet.

Action

Use the Portlet Developer to add the resource bundle class to the invoking portlet. Redeploy the portlet.


POP.004.0002 The Message Key "{0}" was not found in the Resource Bundle "{1}".
Class E
Explanation

The resource bundle message key is missing.

Action

Correct the resource bundle to include a resource for the key specified by the error message.


POP.004.0003 There was no Object found for Message Key "{0}".
Class
Explanation

No object was found for the specified message key.

Action

Specify a valid message key.


POP.004.0004 An error occurred while formatting the Message Key "{0}".
Class E
Explanation

The resource bundle message key is missing or the message could not be formatted because its content is invalid.

Action

Correct the resource bundle to include the key specified by the error message, or correct the resource content identified by the key.


POP.004.0005 Error creating search pools "{0}".
Class S
Explanation

The server cannot initialize some search service data structures because an internal portal error occurred.

Action

Use the specific error message details to diagnose the problem.


POP.004.0006 Invalid cache ID: "{0}".
Class S
Explanation

The server cannot initialize an invalid cache.

Action

Correct the thing cache configuration in the cache.xml My webMethods Server configuration file. A valid entry is: <cache name="Thing Cache" class="com.webmethods.portal.service.cache.impl.TransientCache" maxSize="10000" isClustered="true" ID= "1" enabled="true"/>


POP.004.0008 Unable to initialize content service component: "{0}".
Class E
Explanation

Cannot initialize the content service.

Action

If you cannot reconfigure the offending content service. Call Software AG Global Support for a reset directive.


POP.004.0010 No provider for directory [name, type] : [{0}, {1}]
Class E
Explanation

The server cannot initialize the specified directory service because the directory service is an unknown type.

Action

Correct the directoryConfig.xml My webMethods Server configuration file to remove the Service element with the name attribute value specified by the error message.


POP.004.0011 Invalid XML for directory, no DirectoryConfig element found: "{0}".
Class E
Explanation

The server cannot initialize the directory service because its configuration data is corrupt.

Action

Correct the directoryConfig.xml My webMethods Server configuration file to remove the Service element with the name attribute value specified by the error message.


POP.004.0012 Unable to construct component data for directory: "{0}".
Class S
Explanation

The server cannot initialize the directory service.

Action

Use the Directory Services Administration portlet to create a new directory service and then delete the old one.


POP.004.0013 Alias Cache not found.
Class S
Explanation

The server cannot initialize the alias service because the alias cache is not configured.

Action

Add the following entry to the cache.xml My webMethods Server configuration file: <cache name="AliasCache" class="com.webmethods.portal.service.cache.impl.AliasCache" maxSize="5000" isClustered="true" ID="2" enabled="true"/>


POP.004.0014 Can't create alias cache.
Class E
Explanation

The server cannot initialize the metadata service because the required cache was not located.

Action

Correct the thing cache configuration in the cache.xml My webMethods Server configuration file. A valid entry is: <cache name="Thing Cache" class="com.webmethods.portal.service.cache.impl.TransientCache" maxSize="10000" isClustered="true" ID= "1" enabled="true"/>


POP.004.0015 Unable to create MetaContext: "{0}".
Class E
Explanation

The server cannot create a connection to metadata datasource because the configuration information for the datasource was not retrieved.

Action

Correct the metaContext.xml My webMethods Server configuration file to remove the Context element with the connection attribute value specified by the error message.


POP.004.0016 Can't get schedule list: "{0}".
Class S
Explanation

The server was unable to list all of the My webMethods Server schedules.

Action

Verify that the database has been properly configured and that the My webMethods Server schema was properly installed by paying close attention to the installation process.


POP.004.0017 Thing Cache not found.
Class S
Explanation

The server cannot initialize the metadata service because the required cache was not located.

Action

Correct the thing cache configuration in the cache.xml My webMethods Server configuration file. A valid entry is: <cache name="Thing Cache" class="com.webmethods.portal.service.cache.impl.TransientCache" maxSize="10000" isClustered="true" ID= "1" enabled="true"/>


POP.004.0018 Can't create thing cache.
Class S
Explanation

The server cannot initialize the metadata service because the thing cache configuration is invalid.

Action

Correct the thing cache configuration in the cache.xml My webMethods Server configuration file. A valid entry is: <cache name="Thing Cache" class="com.webmethods.portal.service.cache.impl.TransientCache" maxSize="10000" isClustered="true" ID= "1" enabled="true"/>


POP.004.0019 No queue specified.
Class S
Explanation

The server cannot initialize the e-mail notification deliverer because the notification queue name was not specified in the deliverer's configuration.

Action

Specify the queue name in the queue attribute of the delivery initializers in the phaseProvider.xml My webMethods Server configuration file.


POP.004.0020 Unexpected exception: "{0}".
Class S
Explanation

The server cannot initialize the e-mail notification deliverer because an unexpected error occurred.

Action

Check the _problems_.log in the My webMethods Server current logging directory for more specific error information.


POP.004.0021 Invalid ConnectionManager config file.
Class S
Explanation

The server cannot initialize the datasource connection manager because it cannot acquire its configuration file.

Action

Validate that the portal.properties My webMethods Server configuration file contains the following entry: 'sled.connectionmanager.config=config:/db.xml'.


POP.004.0022 Could not acquire meta context : version service name: "{0}".
Class E
Explanation

The server cannot acquire the metadata datasource by name because the specified name is unrecognized.

Action

Restart the server where My webMethods Server is installed.


POP.004.0023 Could not find root folder of version services.
Class E
Explanation

The root folder of the version service does not exist.

Action

Reinstall the version service using the My webMethods Server Configurator.


POP.004.0024 Could not create service thing : version service name: "{0}".
Class S
Explanation

The server cannot initialize the version service.

Action

Verify that all of the versioning components have been deployed. This includes the version service and version portlet which can be located in the system portal folders.


POP.004.0027 Ftp login failed for user [{0}] : {1}.
Class E
Explanation

The server cannot login to the remote FTP server.

Action

Verify that the credentials are valid for the FTP connection service, and that the network connectivity is valid.


POP.004.0028 Ftp Connection Error: Access Denied
Class E
Explanation

The server cannot connect to the remote FTP server.

Action

Validate that the credentials and configuration are valid for the FTP connection service, using the Content Service Admin portlet. Verify that the network connectivity is valid.


POP.004.0029 Ftp Connection Error: "{0}".
Class E
Explanation

The server cannot connect to the remote FTP server.

Action

Validate that the credentials and configuration are valid for the FTP connection service, using the Content Service Admin portlet. Verify that the network connectivity is valid.


POP.004.0032 Invalid ID's in createThing.
Class E
Explanation

The server was unable to publish a new My webMethods Server object.

Action

Correct the invoking method to pass in a valid owner and parent ID parameters.


POP.004.0033 Database is busy or unavailable.
Class E
Explanation

The server cannot execute the SQL command because the database is not responding to My webMethods Server in a timely fashion. The database could be experiencing too much load preventing it from responding to My webMethods Server and the server might not be able to access the database's server or port. In addition, the database might not be running.

Action

Verify that the database is running, and is not experiencing heavy load. Verify that the database has an adequate number of connection threads available. Verify that the machine on which the My webMethods Server is running can access the datasource's configured host name and port.


POP.004.0034 Datasource Mismatch, passed ({0}) to API on ({1}).
Class E
Explanation

The metadata datasource cannot operate on a resource from a different datasource.

Action

Correct the invoking source code to use a metadata service to operate on a resource that belongs to the service's datasource. Consult the API documentation for more information.


POP.004.0035 Invalid URI
Class E
Explanation

The server cannot resolve the datasource for a metadata My webMethods Server identifier.

Action

The identifier that caused this error does not identify a resource, do not use it to identify a resource.


POP.004.0036 Invalid schedule info: interval "{0}", timeAt "{1}": Unable to parse 'timeAt' and/or 'interval'
Class E
Explanation

An attempt to create or modify a schedule has failed because of invalid schedule parameters.

Action

Correct the invoking code to pass valid schedule parameters. Valid interval and timeAt parameter values are the time values formatted according to the ISO 8601 date/time format.


POP.004.0037 Invalid schedule info: interval "{0}", timeAt "{1}": 'timeAt' overlaps with 'interval'
Class E
Explanation

The server cannot execute the scheduled event because the time to wait (timeAt), after the interval setting but before executing the event, is approximately as long as the interval itself.

Action

Edit the schedule using the Event Administration portlet, in the Portal Configuration category in the My webMethods Server Admin Dashboard, so the interval is longer than the On/At time-to-wait, such that weeks instead of days, hours instead of minutes.


POP.004.0038 Unknown thing type: {0}
Class E
Explanation

The server was unable to identify the base type of the metadata service object.

Action

Verify that the portlet was built using the My webMethods Server.


POP.004.0039 Unable to unregister XType: {0}
Class E
Explanation

The xtype was not registered or there are published instances of that xtype.

Action

Ensure that all instances of that xtype have been deleted prior to unregistering. These types are found by using the Publish History reporting portlet.


POP.004.0040 Can't convert to xtype of different base type
Class E
Explanation

Xtype conversion is unsupported.

Action

Correct the invoking method and do not attempt to modify the xtype parameter.


POP.004.0041 Invalid Principal.
Class E
Explanation

The server cannot modify the access control entry.

Action

Correct the invoking method to specify a principal parameter.


POP.004.0042 Invalid Ace. Cannot set both granted and denied on the same right.
Class E
Explanation

The server cannot set a single access control entry to grant and deny the same access right.

Action

Correct the invoking source code. Consult the API documentation for more information.


POP.004.0043 Invalid Ace. Unknown right.
Class E
Explanation

The server cannot set access control entry with the right bit outside of the defined right bit range, as defined by the access service API.

Action

Correct the invoking source code. Consult the API documentation for more information.


POP.004.0045 Invalid Ace. Cannot delegate a right not granted.
Class E
Explanation

The server cannot modify the access control entry.

Action

Correct the invoking method to include the proper right set parameter.


POP.004.0046 Setting user name is not supported.
Class
Explanation

Internal group and user objects cannot have their name set

Action

Check and correct directory API usage


POP.004.0047 Cookie is not set in this view.
Class E
Explanation

The server cannot display the inbox notifications because a paging cookie was not set.

Action

Log out, log in, and try again.


POP.004.0048 Unable to load Subscription object. Subscription no longer exists.
Class E
Explanation

The server cannot locate the subscription information that triggered the notification.

Action

Delete the notification by locating the offending notification in the My webMethods Server inbox and deleting it.


POP.004.0049 Unable to load Event.
Class E
Explanation

The server cannot load event data because an error occurred in querying the database.

Action

Check the _problems_.log in My webMethods Server current logging directory for more specific error information.


POP.004.0050 Unable to remove Notification.
Class E
Explanation

The server was unable to locate the notification in order to delete it.

Action

Correct the invoking method to specify a valid notification parameter.


POP.004.0051 Unable to remove Event.
Class E
Explanation

The server cannot remove the event item from the database due to a SQL error while executing the stored procedure that performs the removal.

Action

Check the _problems_.log in My webMethods Server current logging directory for more specific error information.


POP.004.0052 Start index beyond end of list.
Class E
Explanation

The server cannot list a page of metadata resources because the specified start index of the page is greater than the total number of resources in the list.

Action

Correct the source code that executes the query. Specify a start index that is less than the total number of resources in the list by modifying the start property of the com.webmethods.portal.service.view.IPagingCookie.


POP.004.0053 Paged before first item.
Class E
Explanation

The server cannot list a page of metadata resources because the specified start or end index of the page is less than one.

Action

Correct the source code that executes the query. Specify a start index that is less than the total number of resources in the list by modifying the start or end properties of the com.webmethods.portal.service.view.IPagingCookie.


POP.004.0054 Invalid end index.
Class E
Explanation

The server cannot execute a paged container query because the page-start index is greater than the page-end index.

Action

Correct the source code that executes the query. Specify a start index that is less than the end index by modifying the start and end properties of the com.webmethods.portal.service.view.IPagingCookie.


POP.004.0055 Invalid sort order for getTreeView.
Class E
Explanation

The server cannot sort the tree view's results with the supplied sort parameter.

Action

Correct the invoking code to pass valid sort parameters.


POP.004.0056 Error saving subscription. No subscription or source information.
Class E
Explanation

The server cannot add the subscription because the subscription information is corrupted.

Action

Correct the invoking method to specify a valid subscription parameter.


POP.004.0057 Error adding subscription. No subscription or source information.
Class E
Explanation

The server cannot add the subscription because the subscription information is corrupted.

Action

Correct the invoking method and ensure that the proper parameters are passed.


POP.004.0059 Can't create an archived thing, use deactivate or delete.
Class
Explanation

The archived thing type cannot be created directly. It is created automatically when object is deleted

Action

Check and correct MWS API used when creating new object instance


POP.004.0060 Unable to save Role.
Class
Explanation

A database error occurred when saving role information

Action

Check logs for additional exception details


POP.004.0061 Unable to load Role.
Class E
Explanation

The server cannot load the metadata information for a registered role.

Action

Using the Role Administration portlet, regenerate and configure the role.


POP.004.0062 Missing results from the database.
Class E
Explanation

The server has received invalid results from a stored procedure.

Action

Verify that the database has been properly configured and that the schema was properly installed by paying close attention to the installation process.


POP.004.0063 Access model not set.
Class E
Explanation

The access service cannot evaluate access rights for a user until its access model has been specified.

Action

Correct the portal.properties file in the My webMethods Server config directory so that it has the following line: framework.access.model=restrictive.


POP.004.0064 Access model is not valid.
Class E
Explanation

The server cannot set the access model because the specified model is unknown. The valid model values are 1 (permissive) and 2 (restrictive).

Action

Correct the portal.properties file in the My webMethods Server config directory so that it has the following line: framework.access.model=restrictive.


POP.004.0065 Serialized object version is different then current version: [version, currentVersion] [{0},{1}]
Class E
Explanation

The server cannot read the alias stored in the database because its serialized object version is out of date.

Action

Revert to the previous version of wm-caf-server.jar, and restart the My webMethods Server.


POP.004.0066 Unknown type: {0}
Class E
Explanation

The server cannot initialize the directory search control because the specified query type is unknown.

Action

Correct the code invoking directory search to specify a type of 1 (users) or 2 (groups).


POP.004.0067 Attempted to set subkey on primary-key only key.
Class E
Explanation

The server cannot create the cache key.

Action

Correct the invoking method to include appropriate cache key parameter.


POP.004.0068 Can't find or create valid cache.
Class E
Explanation

The cache update stored procedure cannot resolve the cache identifier.

Action

Correct the invoking source code to provide a cache-key with a valid cacheID. Consult the API documentation for more information.


POP.004.0069 Cache error: data is not a serializable object
Class E
Explanation

The server attempted to cache an object that is not serializable.

Action

Correct the source code that invokes the com.webmethods.portal.service.cache.impl.DBCache.getBytesFromObject() method to pass serializable object.


POP.004.0070 Invalid connection parameters.
Class E
Explanation

The server cannot connect to the remote FTP server.

Action

Verify that the credentials and configuration are valid for the FTP connection service, using the Content Service Admin portlet. Verify that the network connectivity is valid.


POP.004.0071 Error persisting directory config.
Class E
Explanation

The server cannot store the directory configuration modifications.

Action

Use the Directory Services Administration portlet to create a new directory service and then delete the old one.


POP.004.0072 Cannot lookup non user or group thing based objects : {0}
Class E
Explanation

The server cannot look up directory service resources using metadata identifiers unless the resource is a user, group, or role.

Action

The identifier specified by the error message does not identify a directory resource, do not try to use it to identify a directory resource.


POP.004.0073 Invalid URI, no directory service specified for URI - "{0}"
Class E
Explanation

The server cannot locate an invalid directory user.

Action

Use the Directory Service Administration portlet to verify that the directory service is properly configured.


POP.004.0074 Specified domain in URI not found [domain, uri] -- [{0}, {1}]. This can be due to directory service being disabled or removed
Class E
Explanation

The server cannot look up the directory service based on a Portal identifier because the identified directory service does not exist.

Action

This error may have happened because the specified directory service configuration was deleted. Try re-adding the directory service using the Directory Services Administration portlet (in the Portal Configuration category of the Portal Admin Dashboard).


POP.004.0075 Cannot add directory service, service already exists: {0}
Class
Explanation

Directory service name must be unique.

Action

Check and correct directory service name being created.


POP.004.0076 Error adding new directory service: {0}
Class E
Explanation

The server cannot add or update a directory service because of an error in validating or storing the directory service configuration.

Action

Check the _problems_.log in the My webMethods Server current logging directory for more specific error information.


POP.004.0077 Cannot build URI, unknown type 0
Class E
Explanation

The server cannot construct a My webMethods Server identifier for the directory service object because the specified type is not one of user, group, or role.

Action

Correct the source code that invokes the com.webmethods.portal.server.directory.impl.DirectoryTools.constructDirectoryURI() method to specify only either user, group, or role.


POP.004.0078 Invalid escape character in {0} at position {1}
Class E
Explanation

The server was unable to normalize the LDAP DN.

Action

Investigate the original DN and try to remove offending characters if possible.


POP.004.0079 Cannot retrieve most significant attribute; invalid DN: "{0}"
Class E
Explanation

The server cannot parse a directory service object DN (the object's LDAP ID), because the DN is invalid.

Action

Supply a valid DN to the com.webmethods.portal.service.directory.impl.jndi.JNDITools class's getMostSignificantAttr() and getMostSignificantAttrSet() methods.


POP.004.0080 Unable to connect to: {0}
Class E
Explanation

The server cannot connect to the remote LDAP directory store.

Action

Verify that the Directory configuration is valid by using the Directory Service Administration portlet.


POP.004.0081 No user class specified in directory factory config
Class E
Explanation

The server cannot store the directory configuration modifications.

Action

Use the Directory Services Administration portlet to create a new directory service and then delete the old one.


POP.004.0082 No group class specified in directory factory config
Class E
Explanation

The server cannot initialize the directory service.

Action

Verify that the Directory service is properly configured by using the Directory Service Administration portlet.


POP.004.0083 Unable to wrap object. Unkown type: {0}
Class E
Explanation

The server was unable to read an LDAP entry.

Action

Use the Directory Services Administration portlet to verify that the Directory configuration is valid.


POP.004.0084 Unable to wrap LDAP object: {0}
Class
Explanation

There was an error fetching LDAP object properties

Action

Check MWS logs for additional exception details


POP.004.0085 Error setting attribute [name, value, action, message] - [{0}, {1}, {2}, {3}]
Class E
Explanation

The server cannot modify the LDAP attribute.

Action

Verify that the connection to the LDAP directory store has adequate privileges to modify LDAP entries. Use your LDAP vendor's administration tool.


POP.004.0086 No response controls for directory: {0}
Class E
Explanation

The server cannot update the directory search control.

Action

Start a new search.


POP.004.0087 Cannot page backward
Class E
Explanation

The server cannot page directory search control backwards because the control is at the first page of results.

Action

Correct the source code invoking the directory search to check if the search has previous results before trying to page back to previous results. You can determine if a search has previous results by inspecting the value of the hasPrevious property of the com.webmethods.portal.service.view.IPagingCookie that you used to perform the search.


POP.004.0088 Cannot page forward
Class E
Explanation

The server cannot page the directory search control forward because the search has no more results.

Action

Correct the source code invoking the directory search to check if the search has more results before trying to page forward. You can determine if a search has more results by inspecting the value of the hasNext property of the com.webmethods.portal.service.view.IPagingCookie that you used to perform the search.


POP.004.0089 Unable to retrieve user list
Class E
Explanation

The server cannot list the users of a directory service, there might be a problem connecting to the directory service.

Action

If the directory service was recently configured directory service, go back to the My webMethods Server Admin Dashboard, and double-check the configuration using the Directory Service Administration portlet. Verify that the LDAP or ADSI server that connects to the directory service is up and running properly. Verify that the server the hosts My webMethods Server is able to connect to the LDAP or ADSI server using the hostname and port specified in the directory service's configuration.


POP.004.0090 Unable to lookup user {0}
Class E
Explanation

The server cannot locate the specified user.

Action

Use the User and Group Management portlet to verify that the group exists in the LDAP directory store.


POP.004.0091 Invalid username or password
Class E
Explanation

You have supplied invalid credentials.

Action

Try authenticating again with proper user name and password.


POP.004.0092 Could not lookup DN {0}
Class E
Explanation

The server cannot look up a user or group by directory DN, the user or group's LDAP ID, because an error occurred while querying the directory store.

Action

Check the _problems_.log in My webMethods Server current logging directory for more specific error information.


POP.004.0093 Error looking up group {0}
Class E
Explanation

The server cannot locate the specified group.

Action

Verify that the Directory service is configured by using the Directory Service Administration portlet.


POP.004.0094 Unable to perform search : {0}
Class E
Explanation

An unknown error occurred while performing an LDAP directory search.

Action

Correct the invoking method to specify a valid query parameter.


POP.004.0095 Error getting memberships
Class E
Explanation

The server cannot get membership information from the LDAP directory store.

Action

Verify that the Directory configuration is valid by using the Directory Service Administration portlet.


POP.004.0096 Unable to modify password of user {0} because the supplied old password is incorrect.
Class E
Explanation

An attempt was made to change a user's password without supplying the user's existing password.

Action

Supply the correct existing password.


POP.004.0097 INSTALL is not supported operation for: {0}
Class E
Explanation

Installation of the deployable object has failed.

Action

The deployable object does not have any installation code associated with its file extension. Do not attempt to deploy an unsupported type to the My webMethods Server.


POP.004.0098 UNINSTALL is not supported operation for: {0}
Class E
Explanation

The server cannot uninstall the specified type of component.

Action

The specified component was not uninstalled; try again.


POP.004.0100 Component file not found: {0}
Class E
Explanation

The server cannot install the component the component was not found at the specified location.

Action

Specify the correct location. If you are installing a component using the Install Administration portlet, select a valid location using the portlet's Browse button.


POP.004.0101 Cannot set properties for installer: {0}
Class E
Explanation

The server cannot set install services because an internal error occurred.

Action

Check the _problems_.log in My webMethods Server current logging directory for more specific error information.


POP.004.0102 Script file not found: {0}
Class E
Explanation

The server cannot execute a portlet deployment script.

Action

Using My webMethods Server, rebuild and redeploy the portlet.


POP.004.0103 Install script finished with {0} error(s). Please look at the install.log for details
Class E
Explanation

An error occurred while installing or uninstalling a deployable component.

Action

Examine the logs, and try again. Look for the information specific to the deployed component in the install.log file.


POP.004.0104 Error installing/uninstalling component
Class E
Explanation

An error occurred while installing or uninstalling a deployable component.

Action

Examine the logs, and optionally try again. Look for the information specific to the deployed component in the install.log file.


POP.004.0105 Failed to initialize LoggingCollector: {0}
Class E
Explanation

The server cannot initialize logging over the JMS provider.

Action

Verify that the JMS server is running and configured.


POP.004.0106 PortletInfo is not available for uri [{0}]. Probably the portlet is not properly installed. Try to uninstall and then install it again.
Class E
Explanation

Portlet is not currently available.

Action

Try to uninstall and then re-install the portlet again.


POP.004.0107 Invalid portlet descriptor. Portlet/DBO name is not defined
Class E
Explanation

The server cannot load portlet information from the portlet descriptor because the portlet descriptor does not contain the portlet's name, or the portlet descriptor is incorrectly structured.

Action

Using the My webMethods Server to correct the portlet descriptor and redeploy it to the My webMethods Server.


POP.004.0109 Portlet URI is not published instance of the portlet or type. Unable to persist properties
Class E
Explanation

The server cannot persist the properties of a portlet type without a valid portlet or portlet type identifier.

Action

Supply a valid portlet or portlet type identifier to the com.webmethods.portal.service.portlet.impl.PortletType.setProperties() method.


POP.004.0110 Portlet bean class is invalid: {0}
Class E
Explanation

The server cannot initialize the portlet because the portlet does not implement the required interface.

Action

Using My webMethods Server to correct the portlet's deployment descriptor or regenerate the portlet, and then redeploy it.


POP.004.0111 Portlet bean is not poolable: {0}
Class E
Explanation

The server cannot instantiate the portlet bean because the bean does not implement the com.webmethods.portal.system.pool.IPooledObject interface.

Action

Use My webMethods Server to correct the portlet bean source code to implement IPooledObject.


POP.004.0112 Portlet title bar class is invalid: {0}
Class E
Explanation

The server cannot initialize portlet type information because the portlet titlebar class specified by the portlet's descriptor was not found.

Action

Using the Portlet Developer, remove the titlebar class specification from the portlet descriptor and then redeploy the portlet.


POP.004.0113 Invalid URI, no search service specified: {0}
Class E
Explanation

The server cannot locate search provider because of an invalid URI.

Action

Correct the invoking code to use a valid URI.


POP.004.0114 Invalid datasource name: {0}
Class E
Explanation

The server cannot execute a SQL statement against an invalid datasource.

Action

Correct the invoking method to pass the correct parameters. One of the critical parameters is the handle of the datasource, which can be obtained from the DataManager's API.


POP.004.0115 Can't find data service folder: {0}
Class S
Explanation

The server cannot locate the system folder.

Action

It is possible that a system administrator has deleted a critical system folder. If so, you might need to reinstall My webMethods Server.


POP.004.0116 Cannot obtain database connection from pool: {0}
Class E
Explanation

The server cannot obtain a database connection because all connections allocated for My webMethods Server are already in use or My webMethods Server cannot connect to the database.

Action

Verify that the database is running and is not experiencing a heavy load. Verify that the database has an adequate number of connection threads available. Verify that the machine on which the My webMethods Server is running can access the datasource's configured host name and port.


POP.004.0117 Database connection is closed.
Class E
Explanation

The server cannot execute the SQL query because the database connection is closed.

Action

Execute the statement again. If problems persist, shut down and restart My webMethods Server.


POP.004.0118 Error updating Clob field
Class E
Explanation

An error occurred while updating an unbounded size database field at the database level.

Action

Try the operation again.


POP.004.0119 Error updating Blob field
Class E
Explanation

An error occurred in updating an unbounded size database field at the database level.

Action

Try the operation again.


POP.004.0120 Could not find content service for: {0}
Class E
Explanation

The server cannot store versioned content for a resource because the content service for the resource was not found.

Action

Delete the resource.


POP.004.0121 Versioned content uri is null or empty: {0}
Class E
Explanation

The server cannot access the versioning information.

Action

The version information is corrupted. Try to obtain a different version and recreate the changes.


POP.004.0122 Content doesn't exist: {0}
Class E
Explanation

The server cannot read a resource's versioned content because the resource has no content.

Action

Delete the resource using the UI.


POP.004.0123 User ID is invalid: {0}
Class E
Explanation

The server cannot locate the user's information about the versioned object.

Action

The version information is corrupted. Use the Publish portlet to publish a new instance of the item, and add the item to versioning. Consult the My webMethods Server documentation.


POP.004.0124 Could not find user: {0}
Class E
Explanation

Cannot locate the user's information about the versioned object.

Action

The version information is corrupt. Publish a new instance of the item, and add the item to versioning.


POP.004.0125 Could not find thing: {0}
Class E
Explanation

Cannot resolve metadata resource identifier from string.

Action

The resource specified by the identifier does not exist; do not use the identifier.


POP.004.0126 Cookie is not set on the List View
Class E
Explanation

The server cannot sort or slice the list without a paging cookie.

Action

Correct the invoking source code to associate the paging cookie with the list by setting the cookie property of the list.


POP.004.0127 Unable to initialize directory service {0}: {1}
Class E
Explanation

The server cannot initialize the directory service due to an error.

Action

Verify the connection information to the directory service using the Directory Service Administration portlet. Verify that the login credentials are accurate. Verify that there is network connectivity to the directory service from My webMethods Server.


POP.004.0128 Invalid directory Uri: "{0}"
Class E
Explanation

The URI is malformed.

Action

Correct the invoking method to specify a valid URI parameter.


POP.004.0129 Uri "{0}" should resolve to principal object, but was found: {1}
Class
Explanation

Attempting to look up a directory principal by a URL that does not resolve to a valid directory object.

Action

Check and correct directory API usage. Verify that the URI value used to look up directory object is valid.


POP.004.0130 Unidentified Clob implementation class: {0}
Class E
Explanation

The server cannot retrieve an unbounded-length field from the database because the database driver is incompatible with My webMethods Server.

Action

Modify the datasource driver settings in the db.xml My webMethods Server configuration file to use approved driver.


POP.004.0131 Unidentified Blob implementation class: {0}
Class S
Explanation

The server cannot retrieve result set data because of an incompatible database implementation.

Action

Verify that the correct version of Oracle is installed and that you are using the My webMethods Server supplied database drivers. You can consult your Oracle installation documentation to verify the version of Oracle and ensure that you have nt added any custom Oracle drivers in the class path.


POP.004.0132 Xtype not found: {0}
Class E
Explanation

The server cannot locate the portlet xtype in the metadata store.

Action

Most likely the portlet has been undeployed. Use the Install Administration portlet to redeploy the portlet.


POP.004.0133 XType already registered: {0}
Class
Explanation

Every XType (Portlet Name, Dynamic Business Object) must have a unique name. An attempt was made to install a new portlet or application that contains a portlet or Dynamic Business Object which is already registered in MWS.

Action

Check to see if an application or portlet was renamed. It is also possible that a component un-install was not fully successfull, in this case use /compnonent/development/tools/wm_remove_portlet to clean up and delete component registration in MWS.


POP.004.0134 Error loading class group: {0}
Class E
Explanation

The server cannot load all the classes for the specified class loader group.

Action

Check the _problems_.log in My webMethods Server current logging directory for more specific error information.


POP.004.0135 Error setting config on directory, rolling back to previous config.
Class E
Explanation

The server cannot store the directory configuration modifications.

Action

Use the Directory Services Administration portlet to create a new directory service and then delete the old one.


POP.004.0136 Unable to retrieve group list.
Class E
Explanation

The server cannot get group information from the LDAP directory store.

Action

Verify that the directory configuration is valid by using the Directory Service Administration portlet.


POP.004.0141 No configuration information found for content service, not initializing: {0}.
Class E
Explanation

The server cannot initialize the content service.

Action

If you cannot reconfigure the offending content service by using the Content Service Admin portlet call Software AG Global Support for a reset directive.


POP.004.0144 FTPconnection connect to {0}.
Class I
Explanation

A connection was initiated with the remote FTP server.

Action

This is an informative statement. No action is necessary.


POP.004.0152 No Query Parameters specified.
Class E
Explanation

The server cannot execute the search because there is no search query.

Action

Navigate to the Search portlet and try again.


POP.004.0153 Search Server is unavailable or not properly configured
Class E
Explanation

The server cannot access the search service.

Action

Verify that the search service is properly configured by using the Search Admin portlet.


POP.004.0155 Error adding file to search index: {0}
Class E
Explanation

The server was unable to properly index a My webMethods Server component object.

Action

Determine if the document is in an unknown format or is malformed. Examine the Lucene Search Admin portlet for details on formats.


POP.004.0156 content stream is null
Class E
Explanation

The server cannot locate the content file in the content repository.

Action

Verify that the existence of the content repository and network connectivity. The content repository has some configuration information in the storageConfig.xml. If a custom content service has been mounted, then verify that connectivity between the My webMethods Server process and the network file system is intact. Verify that you can browse to the content using My webMethods Server. Purge all items pending deletion with the Manage Deleted Items Admin Portlet.


POP.004.0157 Error getting resync list for library: {0}
Class E
Explanation

The server cannot resynchronize the search library index because an error occurred in querying the database for the list of resources to index.

Action

Restart the My webMethods Server.


POP.004.0158 Malformed Language Pack: {0}
Class E
Explanation

The server cannot use the language pack because its name is malformed. The name should be one of [language], [language]_[country], or [language]_[country]_[variant], where [language] is a language code such as en or ja, [country] is a country code such as US or JP, and [variant] is a variant code.

Action

Correct the language pack name and re-install language pack.


POP.004.0187 Could not lookup URI {0}
Class
Explanation

If the URI points to an invalid directory object (user or group) an error occurs.

Action

Check and correct directory API usage. Check what URI value was used. This error might also occur if the user was deleted immediately before logging in. The error will go away when MWS caches are updated, usually within seconds.


POP.004.0196 Role Modification is not supported for: {0}.
Class
Explanation

Only static roles support modification of role membership. This error is thrown when attempting to modify membership using the directory APIs for non-static roles

Action

Check and correct directory API usage. Check to see if the role being modified is static role


POP.004.0197 Failed to set property "{0}". Reason: {1}
Class
Explanation

Error has occurred when setting the thing object properties. This might happen when attempting to set the property of a specific java type, but passing in an incompatible value.

Action

Check MWS logs for additional error information. Check the values the code attempted to update and determine if the actual property types are valid.


POP.004.0198 Cannot create a user with a duplicate id: {0}
Class E
Explanation

An attempt was made to create a new user with a duplicate ID of an existing user.

Action

Use a unique identifier when creating a new user, group or role.


POP.004.0199 Cannot create a group with a duplicate id: {0}
Class E
Explanation

An attempt was made to create a new user with a duplicate ID of an existing user.

Action

Use a unique identifier when creating a new user, group or role.


POP.004.0200 Cannot create database connection to default MWS datasource.
Class
Explanation

Unable to create database connection to MWS database schema.

Action

Check MWS database connection configuration in MWS/server/default/config/mws.db.xml config file.


POP.004.0201 Cannot initialize MWS, invalid database schema is specified
Class
Explanation

MWS validates if database schema contains correct tables and then throws this error if it is not configured.

Action

Check if MWS database schema was correctly created by dbConfigurator tool. You might need to drop and re-create MWS schema.


POP.004.0202 Cannot create database connection to default MWS datasource. Please verify database connection parameters in the MWS/server/{0}/config/mws.db.xml configuration file
Class
Explanation

An issue has occurred with the database connection configuration file such as invalid XML or an incorrect JDBC driver name.

Action

Verify the database connection parameters in the MWS/server/default/config/mws.db.xml configuration file.


POP.004.0203 User {0} can not set access on {1}
Class
Explanation

User does not have access rights to set or update permissions.

Action

See if the user or groups and roles, the user is a member of has access rights to set permissions on a given object.


POP.004.0204 Failed to search business data with the "taskTypeID" query term specified.
Explanation

The taskTypeID is not specified in task search term.

Action

Provide a valid taskTypeID as a task search term.


POP.004.0205 Unable to locate whitelist storage object
Explanation

The required whitelist storage object cannot be located.

Action

Contact the system administrator to make sure that whitelist storage has been configured.


POP.004.0206 Failed to connect to database at {0}. Verify hostname/port and connection credentials.
Explanation

Failed to connect to database.

Action

Make sure the database is running and has a network connection, and that the proper credentials are in use. Otherwise, contact the system administrator to make sure database has been configured correctly.


POP.004.0207 Unable to update whitelist storage object
Explanation

Your user account has not been granted the privilege for updating a whitelist storage object.

Action

Contact the system administrator if you need this privilege.


POP.004.0209 Role name is empty.

POP.005.0002 Can Not Re-initialize CDS library
Class E
Explanation

An attempt was made to initialize the system twice.

Action

After My webMethods Server is initialized, do not attempt to do so again.


POP.005.0003 Error parsing segment urls: "{0}"
Class E
Explanation

One of the My webMethods Servers in the cluster has an incorrect URL.

Action

Determine the correct URL for the My webMethods Server, then log in to My webMethods Server as sysadmin and use the Cluster Administration portlet to correct the error.


POP.005.0004 Unable to register component: "{0}" due to "{1}"
Class E
Explanation

My webMethods Server could not register the specified component.

Action

Look in the _problems_.log file for the stack trace of the error. It might be necessary to reinstall the component.


POP.005.0005 Unable to reload component: "{0}" due to "{1}"
Class
Explanation

During dynamic reloading of a component (for example, a portlet), an error occurred.

Action

Check the logs to investigate what component failed to be reloaded. If the component is a portlet, then try uninstalling the portlet and reinstalling it, or try to revert to a previous version of the portlet.


POP.005.0006 This server node is not defined in the MWS cluster configuration: "{0}"
Class E
Explanation

The specified My webMethods Server is not included in the cluster configuration.

Action

Log in to My webMethods Server as sysadmin and use the Cluster Administration portlet to add the specified My webMethods Server to the cluster.


POP.005.0007 Front End URL is not specified in the MWS cluster configuration
Class
Explanation

The cluster doesn't have a valid configuration.

Action

Log in to My webMethods Server as sysadmin and use the Cluster Administration portlet to check the cluster configuration.


POP.005.0008 internal cache error
Class E
Explanation

An internal error occurred while removing an item from a cache.

Action

Inspect the _problems_.log for details of the failure. This error could indicate that there is invalid data in a cache. Restart My webMethods Server to address the problem.


POP.005.0009 Unable to loadComponent: "{0}"
Class E
Explanation

A failure occurred while loading a My webMethods Server component.

Action

Look in the _problems_.log file for the stack trace of the error. It may be necessary to reinstall the component.


POP.005.0010 Unknown object: "{0}"
Class E
Explanation

The ComponentData object for a component is of an unknown type.

Action

The componentData must be one of the handled object types. This error means that a My webMethods Server component could not initialize because it is invalid. Check the component for a valid configuration.


POP.005.0013 Command not found: "{0}"
Class
Explanation

A request to obtain a registered command failed. The command does not exist.

Action

Check the custom portlet invoking the command and ensure that it is specifying a deployed command.


POP.005.0014 Unbalanced "{1}" in value expression: "{0}"
Class
Explanation

A legacy portlet has created an illegal dynamic expression.

Action

Review the custom portlet for proper syntax of any dynamic expressions.


POP.005.0021 Attempting to use non empty My webMethods Server database for fresh deployment. Please make sure to create new empty My webMethods Server database
Class
Explanation

A first time startup check determined that the configured database is not a new database. A new database is required for a new installation.

Action

You must create new (empty) My webMethods Server database and configure My webMethods Server to connect to it. Please refer to the Software AG documentation for installing webMethods products.


POP.005.0022 Wrong version of My webMethods Server database: {0} but expected: {1}
Class
Explanation

A first time startup check determined that the configured database does not match the schema required by My webMethods Server.

Action

Verify that the specified database is properly configured. The database is likely configured with an old or incomplete schema. Please refer to the Software AG documentation for installing webMethods products.


POP.005.0026 Must have at least one server node defined
Class
Explanation

The cluster does not have a valid configuration. No server nodes are defined.

Action

Log in to My webMethods Server as sysadmin and use the Cluster Administration portlet to check the cluster configuration.


POP.005.0028 "{0}" server node must have at least one web stack listener enabled
Class
Explanation

Each node in the cluster is required to have at least one port enabled for accepting web requests.

Action

Log in to My webMethods Server as sysadmin and use the Cluster Administration portlet to check the cluster configuration.


POP.005.0029 server node name must not be empty
Class
Explanation

The cluster does not have a valid configuration. A server node name is not defined.

Action

Log in to My webMethods Server as sysadmin and use the Cluster Administration portlet to check the cluster configuration.


POP.005.0030 Credentials required.
Explanation

Credentials of a valid My webMethods Server user are required.

Action

Provide the user name and password of a valid My webMethods Server user account.


POP.005.0031 Credentials should be String[].
Explanation

Credentials must be supplied in a string array format.

Action

Configure the JMX client to provide credentials in a string array format.


POP.005.0032 Credentials should have 2 elements.
Explanation

Two credential elements (user name and password) were expected, but a non-matching number of elements were provided.

Action

Provide only the user name and password.


POP.005.0033 JMX Authentication failed!
Explanation

The user cannot be authenticated within My webMethods Server.

Action

Provide a valid My webMethods Server user.


POP.005.0034 JMX Authorization failed!
Explanation

The provided user does not have sufficient privileges for connecting via JMX.

Action

Provide a user with the "Connect to JMX" privilege.


POP.005.0035 Insufficient privileges for establishing JMX communication!
Explanation

The provided user does not have sufficient privileges for connecting via JMX.

Action

Provide a user with the "Connect to JMX" privilege.


POP.005.0036 JMX Server Port number cannot be parsed. Port parameter value "{0}".
Explanation

The provided JMX port number is not an available port number.

Action

Change the JMX port configuration property to an available port number.


POP.005.0037 JDK 1.6 or higher is required to run JMX over SSL.
Explanation

My webMethods Server is currently started with JDK 1.5.

Action

Update the My webMethods Server JDK to JDK 1.6.


POP.005.0039 Cannot start CDS library because MWS did not initialize yet
Explanation

The CDS library cannot start because My webMethods Server has not initialized yet.

Action

Wait for My webMethods Server to initialize before starting the CDS library.


POP.005.0040 Cannot start common directory service because IS was started before MWS. Complete the MWS upgrade, which includes starting MWS, before performing the IS upgrade, which includes starting IS. See the upgrade guide for correct order.
Explanation

The CDS library cannot start because the My webMethods Server upgrade has not completed yet.

Action

Complete the My webMethods Server upgrade before starting the CDS library.


POP.005.0041 Unable to start server at port number {0} on host {1} (for: {2}) , reason : {3}. Perhaps another MWS process is already running?
Explanation

The server cannot be started at the specified port on the specified host due to the specified reason.

Action

Make sure that no other My webMethods Server instance is running on the same host using the same port.


POP.005.0042 Unable to start. The server name {0} could not be found in the cluster definition
Explanation

The server cannot start because the specified server name cannot be found in the cluster definition.

Action

Make sure that the server name matches the name specified in the cluster definition.


POP.005.0043 The JMS communication layer for common directory services (CDS) failed to initialize, which causes CDS assets to be out of sync. To enable JMS communication, specify a valid JNDI Provider URL on the Cluster Administration page in My webMethods and restart Integration Server.

POP.006.0003 portlet bean URI not specified
Class E
Explanation

The portlet:bean JSP tag does not contain a uri attribute to identify a valid portlet instance.

Action

Ensure that all instances of the 'portlet:bean' JSP tag include a 'uri' attribute. The attribute value must identify a valid portlet instance. Also, ensure that the portlet type referenced by the 'uri' attribute has been deployed and that all instances referenced by the attribute exist.


POP.006.0004 cannot create portlet bean for the URI "{0}"
Class E
Explanation

The portlet:bean JSP tag does not contain a uri attribute that identifies a valid portlet instance.

Action

Ensure that all instances of the 'portlet:bean' JSP tag include a 'uri' attribute. The attribute value must identify a valid portlet instance. Also, ensure that the portlet type referenced by the 'uri' attribute has been deployed, and that all instances referenced by the attribute exist.


POP.006.0005 parent "{0}" not found
Class
Explanation

The JSP page is invalid, because a JSP tag that is only valid when it is inside of a parent JSP tag is not inside the expected parent.

Action

Locate the error in the JSP page and correct the problem.


POP.006.0006 cannot find portlet bean named "{0}" in the current page context
Class E
Explanation

The portlet:portletController JSP tag does not contain a portlet attribute. The value of this attribute is the key to the pageContext entry in which a com.webmethods.portal.service.portlet.IPortletBean object is stored.

Action

Ensure that all instances of the 'portlet:portletController' JSP tag include a 'portlet' attribute that references a valid IPortletBean.


POP.006.0007 cannot obtain portlet info
Class E
Explanation

The portlet:info JSP tag does not contain an info attribute. The value of this attribute is the key to the pageContext entry in which a com.webmethods.portal.service.portlet.info.IPortletInfo object is stored.

Action

Ensure that all instances of the 'portlet:info' JSP tag include an 'info' attribute that references a valid IPortletInfo object.


POP.006.0008 cannot find portlet info named "{0}" in the current page context
Class E
Explanation

The portlet:propertyGroups, portlet:propertyGroup, or portlet:propertyLine JSP tag does not contain an info attribute. The value of this attribute is the key to the pageContext entry in which a com.webmethods.portal.service.portlet.info.IPortletInfo object is stored.

Action

Ensure that all instances of the 'portlet:propertyGroups', 'portlet:propertyGroup', and 'portlet:propertyLine' JSP tags include an 'info' attribute that references a valid IPortletInfo object.


POP.006.0015 cannot obtain portlet property info
Class
Explanation

The portlet configuration information could not be found. This problem could result from an invalid JSP page or a portlet installation that has been corrupted.

Action

Review the JSP page and ensure the portlet:propertyLine JSP tag is contained within a portlet:bean tag. If the JSP is correct and the problem persists, try re-installing the broken portlet.


POP.006.0016 cannot find portlet property info named "{0}" in the current page context
Class E
Explanation

The portlet:propertyLine JSP tag does not contain a propertyInfo attribute. The value of this attribute is the key to the pageContext entry in which a com.webmethods.portal.service.portlet.info.IPortletPropertyInfo object is stored.

Action

Ensure that all instances of the 'portlet:propertyLine' JSP tag include a 'propertyInfo' attribute that references a valid IPortletPropertyInfo.


POP.006.0017 portlet property name not specified
Class
Explanation

The JSP page contains a portlet:propertyLine tag that is missing the required "name" property.

Action

Review the JSP page and correct any missing "name" properties.


POP.006.0018 cannot obtain portlet property bag
Class E
Explanation

The portlet:propertyLine JSP tag does not contain a propertyInfo attribute. The value of this attribute is the key to the pageContext entry in which a com.webmethods.rtl.util.obj.IPropertyBag object is stored.

Action

Ensure that all instances of the 'portlet:bean' JSP tag include a 'propertyInfo' attribute that references a valid IPropertyBag.


POP.006.0019 cannot find portlet property bag named "{0}" in the current page context
Class E
Explanation

The portlet:propertyLine JSP tag does not contain a propertyInfo attribute. The value of this attribute is the key to the pageContext entry in which a com.webmethods.rtl.util.obj.IPropertyBag object is stored.

Action

Ensure that all instances of the 'portlet:bean' JSP tag include a 'propertyInfo' attribute that references a valid IPropertyBag.


POP.006.0020 object named "{0}" in the current page context is not a portlet property bag
Class E
Explanation

The portlet:propertyLine JSP tag does not contain a propertyInfo attribute. The value of this attribute is the key to the pageContext entry in which a com.webmethods.rtl.util.obj.IPropertyBag object is stored.

Action

Ensure that all instances of the 'portlet:bean' JSP tag include a 'propertyInfo' attribute that references a valid IPropertyBag.


POP.006.0021 "{0}" requires body content
Class
Explanation

A JSP page contains an sql:query tag with missing SQL query text in the tag body.

Action

The JSP page must be edited to either remove the tag or add the SQL query text as the tag body.


POP.006.0022 skin property not found
Class
Explanation

In a JSP page, the ui:img tag is trying to render an image from the skin, but the image was not defined in the skin.

Action

Edit the skin to add the missing image, or change the JSP page to reference an image that does exist.


POP.006.0024 'IterateTag' container is null
Class E
Explanation

The util:iterate JSP tag does not contain a container attribute. The value of this attribute is the key to the pageContext entry in which a java.util.Collection, java.util.Iterator, or java.lang.Object[] object is stored.

Action

Ensure that all instances of the 'util:iterate' JSP tag include a 'container' attribute that references a valid container object.


POP.006.0025 "{0}" class not supported as an 'IterateTag' container
Class
Explanation

A JSP page uses the util:iterate tag, but the value of the 'container' property is not one of the supported data types.

Action

The JSP page must be edited to correct the problem.


POP.006.0026 "{0}" requires "{1}" attribute
Class
Explanation

A JSP page uses the util:iterate tag, but the "indexVar" tag attribute was not supplied.

Action

The JSP page must be edited to add the missing tag attribute.


POP.006.0027 cannot find 'PerfStartTag' token named "{0}"
Class
Explanation

A JSP page uses the util:perfEnd tag, but the perf token supplied in the "name" tag attribute does not exist.

Action

This problem most likely results from a malformed JSP page. The JSP developer should review the JSP page for any mismatched util:perfStart/util:perfEnd pairs.


POP.006.0028 cannot find XML DOM node named "{0}" in the current page context
Class E
Explanation

Use of the xml:valueOf JSP tag causes this exception.

Action

Remove all instances of the 'xml:valueOf' JSP tag.


POP.006.0029 cannot create XML DOM document from given XML stream
Class E
Explanation

The XML stream specified for the xml:xml JSP tag does not contain well-formed XML.

Action

Check the _problems_.log in the Portal's current logging directory for more specific error information.


POP.006.0030 cannot load XML DOM document for the specified location "{0}"
Class E
Explanation

The xml:xml JSP tag could not load a file from the location specified by the 'location' attribute.

Action

Edit instances of the 'xml:xml' JSP tag to include a 'location' attribute that correctly specifies the url to an XML document.


POP.006.0031 Required Property Editor parameter "{0}" not specified.
Class
Explanation

A JSP page is rendering a property editor, but a required parameter has not been supplied.

Action

The JSP developer should edit the JSP page to supply the missing required parameter.


POP.006.0032 Property Editor "{0}" not deployed.
Class
Explanation

A JSP page is trying to render a property editor that is not deployed to My webMethods Server.

Action

Deploy the missing property editor to My webMethods Server, or change the JSP page to use a property editor that is deployed to My webMethods Server.


POP.006.0033 invalid portlet bean URI: {0}
Class
Explanation

A JSP page is using either the portlet:bean or the portlet:controller tag in which the supplied portlet URI does not match an existing portlet instance.

Action

Deploy the missing portlet instance. Or, edit the JSP page to change the URI to match an exisitng portlet instance.


POP.007.0002 Error getting directory mechanics: "{0}"
Class
Explanation

The My webMethods Server instance was not properly installed.

Action

Re-create the My webMethods Server database schema and the My webMethods Server server instance.


POP.007.0003 Error rendering layout "{0}" due to "{1}"
Class
Explanation

There was an error either compiling or executing the application *.JSP page.

Action

You may need to run My webMethods Server with a full JDK which includes the Java compiler. Or, if you have modified any system JSP or NBSP pages, there may have been a syntax error.


POP.007.0006 Requested content was not found: "{0}"
Class
Explanation

An error occurred when attempting to browse to a page or file; the page or file does not exist in My webMethods Server.

Action

Verify that the URL being browsed to is correctly formed and specifies a valid URL.


POP.007.0007 Command not Found: "{0}"
Class E
Explanation

An attempt was made to execute a server command that is not deployed.

Action

Log in to My webMethods Server and use the Install Administration portlet to deploy the missing portlet.


POP.007.0008 The requested resource is not a webservice: "{0}"
Class
Explanation

An attempt was made to obtain a WSDL for a resource that is not a web service.

Action

Modify the request to specify a resource that is a web service.


POP.007.0009 You are not authorized to view the resource.
Class
Explanation

The current user does not have permission to view the specified object or page.

Action

Check the permissions for the object or page to ensure that the user has read rights


POP.007.0010 This renderer is unable to render: "{0}"
Class E
Explanation

An attempt was made to use the FolderRenderer to render an item that is not a folder.

Action

You cannot use the FolderRenderer for non-folders; specify a valid folder.


POP.007.0011 Unknown response: "{0}"
Class E
Explanation

The dispatch handler returned an unknown return code.

Action

Correct the dispatch handler to return a valid return code.


POP.007.0012 Cannot redirect to an invalid data type: "{0}"
Class
Explanation

An incorrect API was called when redirecting to new URL. This error is most likely to occur with a custom portlet.

Action

Verify that the portlet specifies the correct API for redirection.


POP.007.0013 Unable to find adequate authentication information to instantiate an http session
Class
Explanation

My webMethods Server is unable to authenticate an HTTP session.

Action

This error can occur because of incorrect implementation of custom authentication (such as, agent based authentication). Review the custom authentication scheme and verify that it is correctly implemented.


POP.007.0023 getWriter() has already been called on this response.
Class
Explanation

This error indicates an incorrect usage of the HttpResponse.getWriter() API and most likely occurred in a custom CAF application.

Action

Review the CAF application and check the implementation of the HttpResponse APIs.


POP.007.0024 getOutputStream() has already been called on this response.
Class
Explanation

This error indicates an incorrect usage of the HttpRespose.getOutputStream() API and most likely occurred in a custom CAF application.

Action

Review the CAF application and check the implementation of the HttpResponse APIs.


POP.007.0026 Response body content already written.
Class
Explanation

This error occurs when attempting to set the HttpResponse header when the response has been already partially or fully committed. This most likely occurred in a custom CAF application.

Action

Review the CAF application and check the implementation of the HttpResponse APIs.


POP.007.0027 Internal Error! Portlet Controller Bean is null.
Class
Explanation

The system cannot serve as the internal controller bean for the portlet.

Action

This error occurs only for non-CAF portlets. Log out and log back in to resolve this problem.


POP.007.0028 User not found: "{0}"
Class
Explanation

This error occurs when a user ID passed into My webMethods Server by a custom authentication handler cannot be matched.

Action

Verify that the specified user exists in the My webMethods Server directories, and check the custom authentication handler logic.


POP.007.0029 No authentication information was found.
Class
Explanation

No user name was supplied to My webMethods Server when authenticating a user. This error can occur with a custom authentication handler.

Action

Check the implementation of the custom authentication handler. Verify the proper operation of any custom login forms.


POP.007.0033 No portlet found to render "{0}" view.
Class
Explanation

This error can occur if there is a registered portlet renderer, but the portlet defined in the renderer is not found.

Action

Renderers are used internally by My webMethods Server to define certain system pages. If this error occurs, check to see if any of the My webMethods Server system components have been un-installed.


POP.007.0035 The value {0} can not be changed
Class
Explanation

An attempt has been made to change the value of an invalid portlet preference.

Action

Verify that the correct portlet preference name is used.


POP.007.0036 The store() method can not be called from a render method
Class
Explanation

An attempt was made to change and persist portlet preferences from the render() method.

Action

Portlet preferences can be changed only with the portlet action method. Correct the code which updates portlet preferences to use the proper method.


POP.007.0037 The state of the portlet can not be changed
Class
Explanation

Portlet preferences can be updated only during the action() request.

Action

Correct the usage of the portlet preferences APIs to change preferences during the action() request.


POP.007.0038 The key given is null.
Class
Explanation

An attempt was made to use the portlet preferences API with a NULL preference name.

Action

Correct the portlet preferences API implementation to specify a valid preference name.


POP.007.0044 The map given is null
Class
Explanation

This error indicates an incorrect usage of the portlet URL APIs; the parameter map setting is NULL.

Action

Correct the portlet URL APIs implementation to specify a valid parameter map.


POP.007.0045 The map given contains a null key
Class
Explanation

This error indicates an incorrect usage of the portlet URL APIs; the parameters map setting contains a NULL key.

Action

Correct the portlet URL APIs implementation to specify a valid parameter map key.


POP.007.0046 The map contains a non String key
Class
Explanation

This error indicates an incorrect usage of the portlet URL APIs; the parameters map setting contains non-String values.

Action

Correct the portlet URL APIs implementation to pass in only String type parameters.


POP.007.0047 Namespace prefix defined more than once for {0}
Class
Explanation

An incorrect URL was passed into My webMethods Server; more than one namespace prefix is provided.

Action

Check that the URL passed into My webMethods Server contains only one single value for the namespace prefix.


POP.007.0048 Namespace prefix is not defined for {0} and the prefix id is not a valid thingID
Class
Explanation

An incorrect URL was passed into My webMethods Server; no namespace prefix is provided.

Action

Modify the URL passed into My webMethods Server to define the missing namespace prefix.


POP.007.0049 The portlet mode {0} is not supported for the {1} markup language.
Class
Explanation

The requested mode is not implemented in the portlet or is not supported.

Action

Check the portlet URL API usage if attempting to set the mode with APIs. If this is a custom portlet, check to see if the portlet implements this mode.


POP.007.0051 Output generated because of an exception
Class
Explanation

An exception occurred while rendering portlet content.

Action

Refer to the server logs at ..\MWS\server\default\logs for additional exception details.


POP.007.0052 sendRedirect was already called
Class
Explanation

An attempt was made to change the portlet window state, mode, or parameters after a redirect request was sent.

Action

Examine and correct the usage of the redirect request in the portlet code.


POP.007.0053 The portlet mode is null
Class
Explanation

An attempt was made to set a NULL portlet mode.

Action

Examine and correct the usage of the Portlet URL API.


POP.007.0054 The window state {0} is not supported by the portlet container
Class
Explanation

An attempt was made to set an invalid window state.

Action

Examine and correct the window state being set by the Portlet URL APIs.


POP.007.0055 The window state is null
Class
Explanation

An attempt was made to set a NULL window state.

Action

Examine and correct the window state being set by the Portlet URL APIs.


POP.007.0056 The portlet mode {0} is not supported by the portlet container
Class
Explanation

An attempt was made to set an invalid portlet mode.

Action

Examine and correct the portlet mode being set by the Portlet URL APIs.


POP.007.0057 The map contains a non String[] value
Class
Explanation

An attempt was made to set a parameter with a value that is not of the type String[].

Action

Examine and correct parameters being by the Portlet URL API; these values must be String or String[] types only.


POP.007.0058 The key given is null
Class
Explanation

An attempt was made to pass in a NULL key value.

Action

Examine and correct the key value that is being passed in by the Portlet URL AP1.


POP.007.0059 The value given is null
Class
Explanation

An attempt was made to pass in a NULL value.

Action

Examine and correct the value being passed in by the Portlet URL API.


POP.007.0060 The sendRedirect method can not be invoked after any of the following methods of the ActionResponse interface has been called: setPortletMode, setWindowState, setRenderParameter, setRenderParameters
Class
Explanation

The sendRedirect method can not be invoked after any of the following methods of the ActionResponse interface has been called: setPortletMode, setWindowState, setRenderParameter, setRenderParameters

Action

Correct the code to ensure that the sendRedirect() method does not occur after these calls during the same action request.


POP.007.0061 A relative or incorrect path URL is given
Class
Explanation

An attempt was made to redirect to an invalid URL.

Action

Check the URL that is the target of the redirect. It must start with "http://", "https://", or "/".


POP.007.0062 You cannot have null as a parameter
Class
Explanation

An attempt was made to pass in a NULL parameter name.

Action

Examine and correct the parameter name used in the PortletContext and PortletRequest APIs.


POP.007.0063 Content type cannot be application/x-www-form-urlencoded
Class
Explanation

Incorrect API usage. The ServletRequest.getReader() and getInputStream() methods are not available for requests where a form is submitted.

Action

Examine and correct the ServletRequest.getReader() and getInputStream() API usage.


POP.007.0064 This method cannot be called, when getReader() method has been called
Class
Explanation

The ServletResponse method cannot be used when the getReader() method has been called.

Action

Examine and correct the ServletResponse API usage.


POP.007.0065 The attribute name cannot be null
Class
Explanation

An attempt was made to get or set an attribute using a NULL name.

Action

Examine and correct the attribute name being passed to the API.


POP.007.0066 Path must start with /
Class
Explanation

An attempt was made to get a resource using an invalid path. The path of the resource must start with "/".

Action

Examine and correct the path name set by the PortletContext API.


POP.007.0069 The content type {0} is not supported.
Class
Explanation

An attempt was made to set an invalid content type.

Action

Check and correct the content type being set by the PortletResponse API.


POP.007.0070 The content type has not been set before calling the getPortletOutputStream() method.
Class
Explanation

The response content type must be set before obtaining the output stream.

Action

Examine and correct the API calls.


POP.007.0071 the output stream has already been called
Class
Explanation

A Writer cannot be obtained for the response after obtaining the output stream.

Action

Examine and correct the API usage.


POP.007.0072 the PrintWriter object has already been called
Class
Explanation

A Writer cannot be obtained for the response because the output stream has already been obtained.

Action

Examine and correct the API usage.


POP.007.0073 Can not serialize Portlet Preferences
Class
Explanation

There was error when serializing portlet preferences. Portlet preferences cannot contain non-serializable objects.

Action

Check the server log for more details. Examine and correct any portlet preferences being set to ensure only serializable objects are used.


POP.007.0074 Portlet Application "{0}" is not properly installed or unavailable.
Class
Explanation

The system cannot load the specified portlet application. It is either not installed or is disabled in the cluster partition.

Action

Re-install the portlet application. Check the server logs for errors during installation. Verify that the application is enabled in the cluster partition.


POP.007.0075 Portlet "{0}" is not found
Class
Explanation

The specified portlet is not installed or is disabled in the cluster partition.

Action

Verify that the portlet application is installed; install if necessary. Check the server logs for any installation errors. Verify that the portlet is enabled in the cluster partition.


POP.007.0076 PortletContainer Servlet "{0}" is not found. Check default web application configuration file (defaultPortletAppWeb.xml)
Class
Explanation

System servlet is not found.

Action

Determine if any changes were made to system configuration files in ../MWS/server/default/deploy/portal.war. Re-install My webMethods Server.


POP.007.0077 You are not authorized to view the resource. {0}
Class
Explanation

The current user does not have permission to read the specified object or resource.

Action

Examine and correct the user account permissions.


POP.007.0078 This action requires an anti-cross-site-request-forgery token.
Class
Explanation

The executed command or action did not specify an anti-cross-site-request-forgery token.

Action

Check if the given command or action does require an AXRF token. If it does require a token, the token must be explicitly generated and passed in as a URL parameter. For example, when calling a CAF action from a portlet URL, the action must either be configured to not require a token (which lessens security), or a token must be generated when calling this action from a direct URL.


POP.007.0101 Illegal Property Editor name: "{0}".
Class
Explanation

A legacy portlet property uses an invalid property-editor name.

Action

Examine and correct the property-editor name in the wm-portlet.xml file (this applies only to legacy non-CAF portlets).


POP.007.0102 Illegal Property Editor parameter value for "{0}": "{1}".
Class
Explanation

An incorrect parameter value was passed to the property editor.

Action

Check the property editor configuration in the wm-portlet.xml file (this applies only to legacy non-CAF portlets).


POP.007.0103 Property Editor requires DHTML.
Class
Explanation

The property editor "dhtml" property configuration is invalid. The property editor requires DHTML to be enabled.

Action

Examine the property editor configuration in the wm-portlet.xml file. Set dhtml=true (this applies only to legacy non-CAF portlets).


POP.007.0105 Property editor "{0}" parameter "{1}" of type "choice" defined without choices.
Class
Explanation

An invalid 'choice' parameter value was supplied to the property editor.

Action

Examine the property editor configuration in the wm-portlet.xml file (this applies only to legacy non-CAF portlets).


POP.007.0106 Illegal property editor "{0}" attribute: "{1}" value: "{2}".
Class
Explanation

An invalid property editor attribute was encountered.

Action

Examine the property editor configuration in the wm-portlet.xml file (this applies only to legacy non-CAF portlets).


POP.007.0107 Illegal property editor "{0}" parameter "{1}" attribute "{2}" value: "{3}".
Class
Explanation

An invalid property editor attribute was encountered.

Action

Examine the property editor configuration in the wm-portlet.xml file (this applies only to legacy non-CAF portlets).


POP.007.0108 Illegal property editor "{0}" parameter "{1}" choice "{2}" attribute "{3}" value: "{4}".
Class
Explanation

An invalid property editor attribute was encountered.

Action

Examine the property editor configuration in the wm-portlet.xml file (this applies only to legacy non-CAF portlets).


POP.007.0109 Property Editor not deployed: "{0}".
Class
Explanation

An incorrect property editor was specified for use

Action

Examine the property editor configuration in the wm-portlet.xml file (this applies only to legacy non-CAF portlets).


POP.007.0110 Illegal Redirect URL: "{0}".
Class
Explanation

An invalid redirect URL was provided.

Action

Check and correct the redirect URL used in the API calls.


POP.009.0001 WebService invocation is disabled for the requested command
Class
Explanation

An attempt was made to invoke a My webMethods Server command as a web service, but the command does not allow invocation as a web service.

Action

1. Enable the command if it is disabled. 2. For some commands it is not possible to execute them with a web service. If this is one of those commands, no other action can be taken.


POP.009.0002 No WebService type mapping found for java class: {0}
Class
Explanation

For a My webMethods Server command being invoked as a web service, one or more of the command bean (input) fields to the command does not have a SOAP serializer (or deserializer) defined. Therefore, the My webMethods Server framework cannot convert the data to a SOAP message.

Action

The command developer must either mark the command as not enabled for web service invocation, or write the custom serializer/deserialzer code for the data type and register it in the type mapping registry by overriding the "initializeSOAPMappingRegistry" method of the command Java class.


POP.009.0003 The CommandBean must implement ISoapComplexTypeBean to be used as a WebService
Class
Explanation

For a My webMethods Server command being invoked as a web service, the command bean Java class does not implement the interface that is required to be used as a web service.

Action

The command developer must either mark the command as not enabled for web service invocation, or change the command bean Java class to have it implement the interface.


POP.009.0004 Error initializing ServiceDesc for WebService: {0}
Class
Explanation

An unexpected exception was detected while preparing a My webMethods Server command to be invoked as a web service.

Action

Inspect the stack trace in the My webMethods Server server log files to determine the cause of the exception.


POP.009.0005 No WebService marshalling factories are defined for type {0}, and the type can not be treated as a javabean because it does not contain a public no-arg constructor
Class
Explanation

For a My webMethods Server command being invoked as web service, one of the inputs or outputs is a complex Java class that does not have a no-arg constructor. Therefore, it cannot be automatically marshalled into a SOAP message.

Action

The command developer must either mark the command as not enabled for web service invocation, or add a no-arg constructor to the Java class.


POP.009.0006 SAML or Hybrid authentication can not be used. Please deploy SAML Security Service component or use Basic authentication instead
Explanation

The SAML security service is not available.

Action

Deploy the SAML security service component or use basic authentication instead.


POP.009.0007 Could not find a user context.
Explanation

Cannot find UID for the user.

Action

Specify a correct UID.


POP.009.0008 The SAML service you are trying to access is not available right now.
Explanation

The SAML service is currently unavailable.

Action

Inspect the stack trace in the My webMethods Server log files to determine the cause of the exception.


POP.009.0009 Failed to initialize WS-Stack clients within {0} milliseconds. They will be disabled.
Explanation

The Web Services Stack client failed to initialize in the specified period.

Action

Check the OSGi configuration at com.softwareag.platform.config.propsloader or restart My webMethods Server to re-initialize Web Services Stack.


POP.009.0102 {0}: {1} is not a IThingIDList
Class
Explanation

The SOAP serializer that is intended to marshall a IThingIDList object into a SOAP message was passed the wrong type of object.

Action

This is most likely a defect in the way the type mapping registry was initialized. Examine the related code to determine the problem and correct as required.


POP.011.0001 The method "{0}" has not been implemented.
Class
Explanation

An attempt was made to improperly invoke a Dynamic API.

Action

Examine the logs for an indication of what component and user action caused this error.


POP.011.0002 must specifiy both 'prefix' and 'uri' parmeters for 'taglib' directive
Class
Explanation

A syntax error occurred while parsing a JSP page.

Action

Correct the syntax error on the JSP page.


POP.011.0003 expected "{0}" end tag but found "{1}" end tag
Class
Explanation

A syntax error occurred while parsing a JSP page.

Action

Correct the syntax error on the JSP page.


POP.011.0005 "{0}" tag declared invalid by TagExtraInfo
Class
Explanation

A syntax error occurred while parsing a JSP page.

Action

Correct the syntax error on the JSP page.


POP.011.0006 "{0}" tag requires "{1}" attribute
Class
Explanation

A syntax error occurred while parsing a JSP page.

Action

Correct the syntax error on the JSP page.


POP.011.0007 specified attribute "{0}" for "{1}" tag not declared in tld
Class
Explanation

A syntax error occurred while parsing a JSP page.

Action

Correct the syntax error on the JSP page.


POP.011.0008 specified attribute "{0}" value for "{1}" tag cannot be request-time expression
Class
Explanation

A syntax error occurred while parsing a JSP page.

Action

Correct the syntax error on the JSP page.


POP.011.0009 request cannot be null
Class
Explanation

An error occurred while uploading a file.

Action

Check the logs for additional information.


POP.011.0010 saveDirectory cannot be null
Class
Explanation

An error occurred while uploading a file.

Action

Use the Content Service page to ensure that a directory is configured to store the uploaded files.


POP.011.0011 maxPostSize must be positive
Class
Explanation

An error occurred while uploading a file.

Action

Use the Content Service page to ensure that a maximum size for uploaded fixes is configured.


POP.011.0012 "{0}" is not a directory.
Class E
Explanation

The temporary location for for saving a file upload is not valid.

Action

Delete all files in the Portal/server/default/temp folder.


POP.011.0013 "{0}" is not writable directory.
Class W
Explanation

The temporary location for saving a file upload is not writable.

Action

Make sure My webMethods Server was started by a user who has rights to the portal temp folder.


POP.011.0014 Posted content type "{0}" isn't multipart/form-data.
Class E
Explanation

My webMethods Server expects to upload a multipart portlet, but the specified content type does not match.

Action

Check the source file for corruption. If the file is valid and correct, try uploading it again.


POP.011.0015 Posted content length of "{0}" MB exceeds limit of "{1}" MB.
Class E
Explanation

An uploaded file is larger than the size allowed by the system administrator.

Action

Upload a smaller file or have the system administrator use the Content Service Administration portlet to increase the maximum allowed file size.


POP.011.0016 Separation boundary was not specified.
Class E
Explanation

The specified file was corrupted before or during the upload process.

Action

Check the source file for corruption. If the file is valid and correct, try uploading it again.


POP.011.0017 Corrupt form data. No leading boundary was found.
Class E
Explanation

The specified file was corrupted before or during the upload process.

Action

Check the source file for corruption. If the file is valid and correct, try uploading it again.


POP.011.0018 Malformed line after disposition "{0}"
Class E
Explanation

The specified file was corrupted before or during the upload process.

Action

Check the source file for corruption. If the file is valid and correct, try uploading it again.


POP.011.0019 The published file was empty or invalid.
Class E
Explanation

The specified file was corrupted before or during the upload process.

Action

Check the source file for corruption. If the file is valid and correct, try uploading it again.


POP.011.0020 Content disposition "{0}" is corrupt.
Class E
Explanation

The specified file was corrupted before or during the upload process.

Action

Check the source file for corruption. If the file is valid and correct, try uploading it again.


POP.011.0021 Invalid content disposition "{0}".
Class
Explanation

An error occurred while processing the uploaded file.

Action

Investigate the contents of the HTTP POST to see if the data was corrupted.


POP.011.0022 Content type corrupt "{0}".
Class E
Explanation

The specified file was corrupted before or during the upload process.

Action

Check the source file for corruption. If the file is valid and correct, try uploading it again.


POP.011.0023 Malformed line after disposition "{0}".
Class E
Explanation

The specified file was corrupted before or during the upload process.

Action

Check the source file for corruption. If the file is valid and correct, try uploading it again.


POP.011.0024 No file name available.
Class
Explanation

An error occurred while uploading a file.

Action

Examine the contents of the HTTP POST to see if the data was corrupted.


POP.011.0025 Failed to create a DocumentBuilderFactory.
Class E
Explanation

The XML parser appears to be missing.

Action

Check for the xercesImpl.jar file in the portal class path. If the file is missing, reinstall My webMethods Server.


POP.011.0026 Failed to create a TransformerFactory.
Class E
Explanation

The Xalan XSTL processor could not be loaded.

Action

Check for the xalan.jar file in the portal classpath. If the file is missing, reinstall My webMethods Server.


POP.011.0027 JMS already initialized with "{0}".
Class
Explanation

An error occurred during startup.

Action

Ensure that startup routines are invoked only once.


POP.011.0028 JMSProvider: failed to get configuration file.
Class E
Explanation

The JMS provider appears to be disconnected.

Action

Verify that the Broker is running and that My webMethods Server can connect to the computer on which the Broker is running.


POP.011.0029 JMSProvider: failed to get configuration file "{0}", due to "{1}".
Class E
Explanation

The JMS provider appears to be disconnected.

Action

Verify that the Broker is running and that My webMethods Server can connect to the computer on which the Broker is running.


POP.011.0030 JNDI name not found: "{0}".
Class E
Explanation

The JMS provider appears to be disconnected.

Action

Verify that the Broker is running and that My webMethods Server can connect to the computer on which the Broker is running.


POP.011.0031 Can't initialize perf service: "{0}".
Class
Explanation

The specified Performance Service failed to initialize.

Action

Check the perfUtils.properties configuration file for spelling errors.


POP.011.0032 Perf Service Not Initialized.
Class
Explanation

An attempt was made to use the Performance Service before it was initialized.

Action

The Performance Service might be disabled. Check the contents of the perfUtils.properties configuration file.


POP.011.0033 Cannot open stream. Location: "{0}".
Class
Explanation

An attempt to access a file failed.

Action

Ensure that the file exists at the specified location.


POP.011.0034 Size read mismatch "{0}" vs "{1}"
Class E
Explanation

An InputStream corruption error occurred.

Action

Examine the _problems_.log file for the stack trace of the error. The stack trace may not provide enough detail to explain why the error was thrown, but it will show where the error originated.


POP.011.0035 Cannot create temporary folder: "{0}"
Class
Explanation

Folder creation failed.

Action

Most likely, the current process lacks Write access to the configured temporary folder.


POP.011.0036 Unable to delete file: "{0}"
Class E
Explanation

An error occurred while removing a temporary file.

Action

Find the specified file and remove it manually.


POP.011.0037 Unable to delete directory: "{0}"
Class E
Explanation

An error occurred while cleaning up temporary files.

Action

Find the specified directory and manually remove the temporary files.