Message Class 1004 - IDL Compiler

This message class is returned if an error occurred concerning the Software AG IDL Compiler. Messages of this class have the format:

1004nnnn

where	1004	is the message class, and
	`nnnn`	is the message number in the range 0000 - 9999.

Overview of Messages

10040001 | 10040002 | 10040003 | 10040004 | 10040005 | 10040006 | 10040007 | 10040008 | 10040009 | 10040010 | 10040011 | 10040012 | 10040013 | 10040014 | 10040015 | 10040016 | 10040017 | 10040018 | 10040019 | 10040020 | 10040021 | 10040022 | 10040023 | 10040024 | 10040025 | 10040026 | 10040027 | 10040028 | 10040029 | 10040030 | 10040031 | 10040032 | 10040033 | 10040034 | 10040035 | 10040036 | 10040037 | 10040038 | 10040039 | 10040040 | 10040041 | 10040042 | 10040043 | 10040044 | 10040045 | 10040046 | 10040047 | 10040048 | 10040049 | 10040050 | 10040051 | 10040052 | 10040053 | 10040054 | 10040055 | 10040056 | 10040057 | 10040058 | 10040059 | 10040060 | 10040061 | 10040062 | 10040063 | 10040064 | 10040065 | 10040066 | 10040067 | 10040068 | 10040069 | 10040070 | 10040071 | 10040072 | 10040073 | 10040074 | 10040075 | 10040076 | 10040077 | 10040078 | 10040079 | 10040080 | 10040083 | 10040084 | 10040085 | 10040086 | 10040087 | 10040088 | 10040089 | 10040090 | 10040091 | 10040092 | 10040093

10040001	No template file given
Explanation	A template file is mandatory to run the Software AG IDL Compiler.
Action	Specify a template file using the `-t` option.

10040002

Template file <file-name> open failed

Explanation

The template file specified could not be opened for one of the following reasons:

The path or template file does not have read access.
The template file is missing.

Action

Depending on the situation above, provide the template file and grant read access to the IDL Compiler.

10040003	Template file <file-name> is too large (Max. 1MB)
Explanation	The maximum size for the template file has been exceeded.
Action	For customer-written template files: Create several smaller files from your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040004	#endif expected in template
Explanation	When parsing the template file, the following error was detected: An expected #endif preprocessor statement was not found in the template file.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040005	Premature end of template file occurred
Explanation	When parsing the template file, an unexpected end-of-file condition occurred.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040006	Illegal opcode in template
Explanation	When running the template file an illegal operation code was detected.
Action	Contact Software AG support.

10040007	Illegal number
Explanation	When running the template file, an illegal number was found in a template variable.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040008	Illegal character occurred in code: '<code>'
Explanation	When parsing the template file, an illegal character was detected.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040009	%block without block
Explanation	When parsing the template file, the following error was detected: A block was missing.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040010	%library{ } must not be an inner loop
Explanation	When parsing the template file, the following error was detected: A `library` loop could not be placed within another `library` loop.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040011	%program{ }-loop must be embedded in %library{ }-loop
Explanation	When parsing the template file, the following error was detected: A `program` loop must be placed within a `library` loop.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040012	%name{ }-loop must be embedded in %program or %x_struct { }-loop
Explanation	When parsing the template file, the following error was detected: A `name` loop must be placed within a `program` or `x_struct` loop.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040013	%x_struct{ }-loop must be embedded in %library{ }-loop
Explanation	When parsing the template file, the following error was detected: An `x_struct` loop must be placed within a `library` loop.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040014	Illegal environment variable syntax
Explanation	When parsing the template file, the following error was detected: The syntax for environment variables is incorrect. Environment variables must be surrounded by parentheses: '(' and ')'.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040015	Illegal numeric variable: '%compute'
Explanation	When parsing or running the template file, an illegal numeric variable was found in a template variable.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040016	Illegal string variable <variable>: '%assign'
Explanation	When parsing or running the template file, an illegal string was detected in a template variable.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040017	Illegal closing brackets of array string variable <variable>: '%assign'
Explanation	When parsing or running the template file, an array string variable could not be determined correctly.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040018	Illegal opening brackets of array string variable <variable>: '%assign'
Explanation	When parsing or running the template file, an array string variable could not be determined correctly.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040019	Array string variable out of bounds
Explanation	When running the template file, an array string variable could not be determined correctly. Array variables must be in the range 0 - 8.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040020	%Sanitize<flag> is unknown
Explanation	When parsing the template file, an illegal statement was detected.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040021	%using I must have specified 1, 2 or 4
Explanation	When parsing the template file, an illegal length for the data type integer was detected.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040022	%using F must have specified 4 or 8
Explanation	When parsing the template file, an illegal length for the data type float was detected.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040023	Illegal character occurred in %using <type>: '<char>' (0x%.2X)
Explanation	When parsing the template file, an illegal data type was detected.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040024	Recursive type specification, <output-statement> used in %u clause
Explanation	When parsing the template file, an error was detected.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040025	Illegal %-specification '<char>'
Explanation	When parsing the template file, an illegal statement was detected.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040026	} without block
Explanation	When parsing the template file, a closing brace was detected without the corresponding opening one.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040027	Unsupported %-format: <char>
Explanation	When running the template file, an unsupported format was detected.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040028	<statement> is unknown
Explanation	An incorrect <statement> was found in the template file.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040029	Illegal string
Explanation	When parsing the template file, a string could not be determined correctly.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040030	String continues on next line
Explanation	When parsing the template file, a string could not be determined correctly. A string must not continue on the next line.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040031	String missing: <string>
Explanation	When parsing the template file, a string was expected but did not occur.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040032	Missing ')' in expression
Explanation	When running the template file, an illegal expression was detected.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040033	Bad expression (read '<expression>')
Explanation	When running the template file, an illegal expression was detected.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040034	Level nesting exceeded
Explanation	When running the template file, the maximum number of levels was exceeded.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040035	Recursion too deep
Explanation	When parsing the template file, an error was detected.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040036	<statement> blocks exceeded, maximum is <number>
Explanation	When parsing the template file, the maximum number of nested blocks for statement <statement> of <number> was exceeded.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040037	Internal error
Explanation	An unexpected error occurred when running the Software AG IDL Compiler.
Action	Contact Software AG support.

10040038	Can access <output-statement> only in <control-statement>-loop
Explanation	When running the template file, a statement was executed which was not placed in its proper loop statement.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040039	Premature EOF within preprocessor block in template
Explanation	When parsing the template file, an unexpected end-of-file condition occurred.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040040	Unknown preprocessor command <command> in template
Explanation	When parsing the template file, an unknown statement was detected.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040041	#endif found without #ifdef in template
Explanation	When parsing the template file, an `#endif` was found without a corresponding `#ifdef` preprocessor statement.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040042	#else found without #ifdef in template
Explanation	When parsing the template file, an `#else` was found without a corresponding `#ifdef` preprocessor statement.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040043	#elif found without #ifdef in template
Explanation	When parsing the template file, an `#elif` was found without a corresponding `#ifdef` preprocessor statement.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040044	#elif found after #else in template
Explanation	When parsing the template file, an `#elif` was found after a corresponding `#else` preprocessor statement.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040045	#ifdef found before #endif in template
Explanation	When parsing the template file, an `#ifdef` was found before an `#endif` preprocessor statement.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040046	<statement> found without `DEFINITION` in template
Explanation	An incorrect <`statement`> was found in the template file.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040047

Software AG IDL file <file-name> open failed

Explanation

The Software AG IDL file specified could not be opened for one of the following reasons:

The path or Software AG IDL file does not have read access.
An incorrect name was given for the IDL file or it is missing.

Action

Depending on the situation above, provide the Software AG IDL file and/or give read access to the IDL Compiler.

10040048	Software AG IDL file parse error
Explanation	When parsing the Software AG IDL file, an error occurred.
Action	Correct your IDL file and rerun the IDL Compiler.

10040049	Usage error
Explanation	The Software AG IDL Compiler was called with an incorrect template file, IDL file or option settings.
Action	Supply the IDL Compiler with correct parameters.

10040050	Out of memory
Explanation	A memory request by the IDL Compiler could not be fulfilled by the operating system.
Action	Increase your memory resources and rerun the IDL Compiler.

10040051	Pushback character limit reached
Explanation	The maximum number of pushback characters was reached by the operating system.
Action	Contact Software AG support.

10040052	Label table overflow
Explanation	The maximum number of labels was reached by the operating system.
Action	Contact Software AG support.

10040053	Output buffer overflow
Explanation	An overflow of the output buffer occurred.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040054	Library name is too long
Explanation	A library name specified in the IDL file is too long. The maximum number of characters is 128.
Action	Correct your IDL file and rerun the IDL Compiler.

10040055	Library name is empty
Explanation	A library name specified in the IDL file contains no characters.
Action	Correct your IDL file and rerun the IDL Compiler.

10040056	Library alias name is too long
Explanation	A library alias name specified in the IDL file is too long. The maximum number of characters is 128.
Action	Correct your IDL file and rerun the IDL Compiler.

10040057	Library alias name is empty
Explanation	A library alias name specified in the IDL file contains no characters.
Action	Correct your IDL file and rerun the IDL Compiler.

10040058	Program <program-name> already defined
Explanation	A program with the same name has already been defined in the IDL file.
Action	Correct your IDL file and rerun the IDL Compiler.

10040059	Program alias <alias-name> already defined
Explanation	A program alias with the same name has already been defined in the IDL file.
Action	Correct your IDL file and rerun the IDL Compiler.

10040060	Program name is too long
Explanation	A program name specified in the IDL file is too long. The maximum number of characters is 128.
Action	Correct your IDL file and rerun the IDL Compiler.

10040061	Program name is empty
Explanation	A program name specified in the IDL file contains no characters.
Action	Correct your IDL file and rerun the IDL Compiler.

10040062	Program alias name is too long
Explanation	A program alias name specified in the IDL file is too long. The maximum number of characters is 128.
Action	Correct your IDL file and rerun the IDL Compiler.

10040063	Program alias name is empty
Explanation	A program alias name specified in the IDL file contains no characters.
Action	Correct your IDL file and rerun the IDL Compiler.

10040064	Structure <structure-name> already defined
Explanation	A structure with the same name has already been defined in the IDL file.
Action	Correct your IDL file and rerun the IDL Compiler.

10040065	Structure name is too long
Explanation	A structure name specified in the IDL file is too long. The maximum number of characters is 128.
Action	Correct your IDL file and rerun the IDL Compiler.

10040066	Structure name is empty
Explanation	A structure name specified in the IDL file contains no characters.
Action	Correct your IDL file and rerun the IDL Compiler.

10040067	Structure <structure-name> not defined
Explanation	An structure not defined in the IDL file was referenced.
Action	Correct your IDL file and rerun the IDL Compiler.

10040068	Level must be at least <level-number>
Explanation	An incorrect level for parameters is specified in the IDL file.
Action	Correct your IDL file and rerun the IDL Compiler.

10040069	Level must be <level-number>
Explanation	An incorrect level for parameters is specified in the IDL file.
Action	Correct your IDL file and rerun the IDL Compiler.

10040070	Parameter name is too long
Explanation	A parameter name specified in the IDL file is too long. The maximum number of characters is 31.
Action	Correct your IDL file and rerun the IDL Compiler.

10040071	Maximum level is <level-number>
Explanation	An incorrect level for parameters is specified in the IDL file.
Action	Correct your IDL file and rerun the IDL Compiler.

10040072	Index bound is too high
Explanation	A dimension specification for a parameter in the IDL file was too high. The maximum limit for upper bounds is 1073741824.
Action	Correct your IDL file and rerun the IDL Compiler.

10040073	Invalid dimension specification
Explanation	The specification of a dimension for a parameter in the IDL file was incorrect.
Action	Correct your IDL file and rerun the IDL Compiler.

10040074	Errors in the IDL file <file-name> detected
Explanation	Errors in the IDL file were detected - generation failed.
Action	Correct your IDL file and rerun the IDL Compiler.

10040075	Recursion of parameter detected - invalid IDL file
Explanation	A parameter recursion occurred in the IDL file.
Action	Correct your IDL file and rerun the IDL Compiler.

10040076	Group parameter '<parameter-name>' has no members
Explanation	A group defined in the IDL file has no members.
Action	Correct your IDL file and rerun the IDL Compiler.

10040077	No output file open
Explanation	When running the template file, an output statement was supposed to be executed but no file was open.
Action	For customer-written template files: Correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: Contact Software AG support.

10040078

Could not open %f file <file-name>

Explanation

An output file could not be opened for one of the following reasons:

The path or file does not have write access.
The file name is incorrect.

Action

Depending on the situation above, provide write access to the IDL Compiler or correct the file name.

10040079	-P Option is limited to 32 characters
Explanation	The IDL Compiler was called with incorrect parameter `-P`. The length of an option is limited to 32 characters.
Action	Supply the IDL Compiler with correct parameters.

10040080	Max. -P options = <max-number>
Explanation	The IDL Compiler was called with too many options. The maximum possible number of options is <`max-number`>.
Action	Supply the IDL Compiler with correct parameters.

10040083	Illegal option - <option>
Explanation	The IDL Compiler was called with incorrect parameters.
Action	Supply the IDL Compiler with correct parameters.

10040084	Option must be followed by whitespace - <option>
Explanation	The IDL Compiler was called with incorrect parameters. All options must be followed by whitespace.
Action	Supply the IDL Compiler with correct parameters.

10040085	Option requires an argument - <option>
Explanation	The IDL Compiler was called with incorrect parameters. The given option requires an argument.
Action	Supply the IDL Compiler with correct parameters.

10040086	Option must not be clustered - <option>
Explanation	The IDL Compiler was called with incorrect parameters. Options must not be clustered.
Action	Supply the IDL Compiler with correct parameters.

10040087	Recursion for structure <structure-name> detected - Invalid IDL file
Explanation	A structure recursion occurred in the IDL file.
Action	Correct your IDL file and rerun the IDL Compiler.

10040088	Syntax error in %execute statement
Explanation	When parsing the template file, an illegal %execute statement was detected.
Action	For customer-written template files: correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: contact Software AG support.

10040089	Parameter <parameter name> has the wrong type in return statement
Explanation	When parsing the template file, a wrong parameter type was detected in the return declaration of the `%execute` statement.
Action	For customer-written template files: check the return declaration of the `%execute` statement and the parameter of the `%return` statement. The parameter types must match. For template files delivered by Software AG: contact Software AG support.

10040090	Count of parameter is wrong in return statement
Explanation	When parsing the template file, the wrong number of parameters was detected in the return declaration of the `%execute` statement.
Action	For customer-written template files: check the return declaration of the `%execute` statement and the parameter of the `%return` statement. The count of parameters must match. For template files delivered by Software AG: contact Software AG support.

10040091	Parser exception occurred in template file <template file name>
Explanation	When parsing the template file, a wrong statement or a syntax error has been detected by the template parser.
Action	For customer-written template files: correct your template file and rerun the IDL Compiler. For template files delivered by Software AG: contact Software AG support.

10040092	%UnsupportedProgram statement must be embedded in %program or %name loop
Explanation	`%UnsupportedProgram` statement needs a `%library { %program { }}` loop.
Action	For customer-written template files: create several smaller files from your template file and rerun the IDL Compiler. For template files delivered by Software AG: contact Software AG support.

10040093	%UnsupportedProgram statement cannot be used if an output file is open
Explanation	`%UnsupportedProgram` must be used before an output file is opened.
Action	For customer-written template files: create several smaller files from your template file and rerun the IDL Compiler. For template files delivered by Software AG: contact Software AG support.