This class indicates an error occurred in the evaluation of the EntireX license file. Messages of this class have the format:
1008nnnn
| where | 1008 | is the message class, and |
| nnnn | is the message number in the range 0000 - 9999. |
10080001 | 10080002 | 10080003 | 10080004 | 10080005 | 10080006 | 10080007 | 10080008 | 10080009 | 10080010 | 10080011 | 10080012 | 10080013 | 10080014 | 10080015 | 10080016 | 10080017 | 10080018 | 10080019 | 10080020 | 10080021 | 10080022 | 10080023 | 10080024 | 10080025 | 10080026 | 10080027 | 10080028 | 10080029 | 10080030 | 10080031 | 10080032 | 10080033 | 10080034 | 10080035 | 10080036 | 10080037 | 10080038 | 10080041 | 10080042 | 10080043 | 10080081 | 10080082 | 10080083 | 10080099| 10080001 | EntireX license file :1: not found |
| Explanation |
The EntireX XML license key file was not found. |
| Action |
Check the filename :1:. Check that the EntireX component has read access
to the EntireX license file. On UNIX, check the environment variable |
| 10080002 | The EntireX license has expired |
| Explanation |
Your EntireX license has expired. |
| Action |
Enter a valid license file on the EntireX Installation preference page or contact Software AG Support. |
| 10080003 | EntireX is not licensed for your operating system |
| Explanation |
Your EntireX license is not valid for your operating system. |
| Action |
Enter a valid license file on the EntireX Installation preference page or contact Software AG Support. |
| 10080004 | EntireX license file does not contain a valid key |
| Explanation |
Your EntireX XML license key file is incorrect and thus invalid. |
| Action |
Enter a valid license file on the EntireX Installation preference page or contact Software AG Support. |
| 10080005 | EntireX license file has been changed or is corrupt |
| Explanation |
Your EntireX XML license key file is incorrect and thus invalid. |
| Action |
Enter a valid license file on the EntireX Installation preference page or contact Software AG Support. |
| 10080006 | Internal error :1: in Software AG license interface |
| Explanation |
An internal error occurred during the EntireX license check. |
| Action |
Contact Software AG Support. |
| 10080007 | EntireX license file does not contain EntireX Broker |
| Explanation |
Your EntireX XML license key file is incorrect and thus invalid. |
| Action |
Enter a valid license file on the EntireX Installation preference page or contact Software AG Support. |
| 10080008 | Invalid subcomponent :1: in component :2: |
| Explanation |
The license file does not contain the required subcomponent :1: in the section :2:. |
| Action |
Enter a valid license file on the EntireX Installation preference page or contact Software AG Support. |
| 10080009 | EntireX license: memory allocation error |
| Explanation |
The operating system could not satisfy a memory request. |
| Action |
Increase your memory resources if possible, or contact Software AG Support. |
| 10080010 | Unable to determine SAG_COMMON |
| Explanation |
The environment variable $SAG is missing. The installation would appear to be incorrect. |
| Action |
Make sure that the product you are using was installed correctly. Otherwise contact Software AG Support. |
| 10080011 | PATH length exceeded for license key file |
| Explanation |
The maximum path length is 255 characters. The absolute path (path and file name) of the license file exceeds this maximum length. |
| Action |
If possible, reinstall EntireX on a file system location with a shorter path length. Otherwise contact Software AG Support. |
| 10080012 | EntireX license file has no entry for Version :1: |
| Explanation |
The license file does not contain the required version information. |
| Action |
Enter a valid license file on the EntireX Installation preference page or contact Software AG Support. |
| 10080013 | Price unit value of EntireX license file is not valid |
| Explanation |
z/OS: Your EntireX XML license key file is incorrect and thus invalid. |
| Action |
Contact Software AG Support. |
| 10080014 | Error from QVS interface |
| Explanation |
z/OS: The query interface returned a bad return code. |
| Action |
No action required. |
| 10080015 | CPUID :1: is not defined in EntireX license file |
| Explanation |
z/OS: Your EntireX XML license key file does not contain the CPUID :1:. |
| Action |
Contact Software AG Support. |
| 10080016 | LPAR name :1: is not defined in EntireX license file |
| Explanation |
z/OS: Your EntireX XML license key file does not contain the LPAR name :1:. |
| Action |
Contact Software AG Support. |
| 10080017 | LPAR name is not accepted with CPU-based pricing model |
| Explanation |
z/OS: Your EntireX XML license key file is incorrect. |
| Action |
The error is currently ignored. |
| 10080018 | Machine capacity higher than MSU in EntireX license file |
| Explanation |
z/OS: Your EntireX XML license key file is incorrect. |
| Action |
The error is currently ignored. |
| 10080019 | Please check licensed MSU value :1: with SCRT Report |
| Explanation |
z/OS: Your EntireX XML license key file is incorrect. |
| Action |
The error is currently ignored. |
| 10080020 | High Availability PStore (RUN-MODE=STANDBY) not licensed |
| Explanation |
This license option for this feature is missing. |
| Action |
Contact Software AG Support. |
| 10080021 | CPUID :1: is not defined in EntireX license file. It is therefore assumed that you are running in a Disaster Recovery environment |
| Explanation |
z/OS: Your EntireX XML license key file does not contain the CPUID :1:. |
| Action |
Contact Software AG Support. |
| 10080022 | Not running in a VM |
| Explanation |
EntireX is not running in a virtual machine. |
| Action |
Request a new license to run EntireX in a non-VM environment. |
| 10080023 | Error during VM determination |
| Explanation |
An internal error occurred during determination of virtual machine. |
| Action |
Contact Software AG Support. |
| 10080024 | Present CPU is in a higher performance bucket than licensed |
| Explanation |
The performance bucket in the license key file does not match the CPU of the machine. |
| Action |
Contact Software AG Support to request an upgrade of the license key file. |
| 10080025 | Error during determination of bucket |
| Explanation |
An internal error occurred during determination of the bucket. |
| Action |
Contact Software AG Support. |
| 10080026 | Error during determination of CPU model |
| Explanation |
An internal error occurred during determination of the CPU model. |
| Action |
Contact Software AG Support. |
| 10080027 | Provided buffer is too small |
| Explanation |
An internal error occurred. |
| Action |
Contact Software AG Support. |
| 10080028 | File read error (fread) |
| Explanation |
The license key file could not be read. |
| Action |
Check if the license key file can be read. |
| 10080029 | Trial License Key file must not be write-protected |
| Explanation |
The license key file cannot be modified. |
| Action |
Check the file attributes of the license key file. Set it to writable. |
| 10080030 | ASCII-to-EBCDIC (or vice versa) conversion error occurred |
| Explanation |
An internal error occurred during conversion of the license data. |
| Action |
Check if the correct license file was used. |
| 10080031 | UTF Conversion Source exhausted |
| Explanation |
An internal error occurred during conversion of the license data. |
| Action |
Contact Software AG Support. |
| 10080032 | UTF Conversion Target exhausted |
| Explanation |
An internal error occurred during conversion of the license data. |
| Action |
Contact Software AG Support. |
| 10080033 | File write error (fwrite) |
| Explanation |
The license key file cannot be modified. |
| Action |
Check if write permission is missing or if no space is available. |
| 10080034 | GetVersion() failed |
| Explanation |
An internal error occurred. |
| Action |
Contact Software AG Support. |
| 10080035 | File read error (fseek) |
| Explanation |
The license key file is corrupted and cannot be read. |
| Action |
Contact Software AG Support. |
| 10080036 | Number of physical CPUs present exceeded |
| Explanation |
The license key file does not reflect the actual number of physical CPUs. |
| Action |
Contact Software AG Support to request an upgrade of the license key file. |
| 10080037 | Determination of number of CPUs failed |
| Explanation |
An internal error occurred during determination of the number of CPUs. |
| Action |
Contact Software AG Support. |
| 10080038 | Virtualized environment not included in your product license |
| Explanation |
EntireX is running in a virtual machine without being licensed. |
| Action |
Request a new license to run EntireX in a VM environment. |
| 10080041 | Cannot load library :1: |
| Explanation |
The library :1: is not found. |
| Action |
Check if library is missing or has wrong permission. Contact Software AG Support. |
| 10080042 | Cannot find entry point :1: in :2: |
| Explanation |
An internal error. May happen if a license library of a wrong version is used. |
| Action |
Contact Software AG Support. |
| 10080043 | The Java system property entirex.license.location is not set |
| Explanation |
The Java system property |
| Action |
Check that the Java system property |
| 10080081 | The EntireX Adapter license key file does not contain a license for connections to IMS Connect |
| Explanation |
This license option for this feature is missing. |
| Action |
Enter a valid license file on the EntireX Installation preference page or contact Software AG Support. |
| 10080082 | The EntireX Adapter license key file does not contain a license for connections to CICS ECI |
| Explanation |
This license option for this feature is missing. |
| Action |
Enter a valid license file on the EntireX Installation preference page or contact Software AG Support. |
| 10080083 | The EntireX Adapter license key file does not contain a license for connections to Direct RPC |
| Explanation |
This license option for this feature is missing. |
| Action |
Enter a valid license file on the EntireX Installation preference page or contact Software AG Support. |
| 10080099 | Component EntireXBroker without Broker Yes |
| Explanation |
Broker is not authorized to run. Only the Administration Service with |
| Action |
If you want to run a broker other than the Administration Service, contact Software AG Support. |