Using EntireX RPC for CL under IBM i

This document covers the following topics:

Note:
The EntireX RPC Server for IBM i of EntireX version 7.1.1 running under IBM i (AS/400) is no longer supported. We strongly recommend using the new RPC Server for AS/400 or the EntireX Adapter. See also Connection Parameters for AS/400 Connections.


Creating a Sample Server in CL

This section describes how to build a server application using the IBM i ILE language CL. The sample server will be named SENDMESS. Using the IBM i command SNGPGMMSG (send program message), it sends a message to a given IBM i user and returns a confirmation to the RPC client.

This section tells you how to

Create the Client/Server Interface

Using the Designer on your PC, create a Software AG IDL file similar to the following:

Library 'EXAMPLE' Is
 Program 'SENDMESS' Is
  Define Data Parameter
   1 UserID           (A10)  In
   1 Message_Text     (A70)  In
   1 Confirmation     (A40)  Out
  End-Define

Section Software AG IDL to CL Mapping describes how IDL data types are mapped to CL data items.

Create the Server

The server is implemented as an ILE CL program of type *PGM.

For our IDL example SENDMESS, the implemented server looks similar to the example below:

        PGM        PARM(&USER &MESSTEXT &CONFIRM)
 /*--------------------------------------------------------------------*/ 
        DCL        VAR(&USER) TYPE(*CHAR) LEN(10)     /* the user ID   */
        DCL        VAR(&MESSTEXT) TYPE(*CHAR) LEN(70) /* the text      */
        DCL        VAR(&CONFIRM) TYPE(*CHAR) LEN(40)  /* returned text */
 /*--------------------------------------------------------------------*/
        CHGVAR     VAR(&CONFIRM) VALUE(' ')           /* clean it */
        SNDPGMMSG  MSG(&MESSTEXT) TOUSR(&USER) MSGTYPE(*COMP)

        MONMSG     MSGID(CPF0000) EXEC(GOTO CMDLBL(BAD))
        CHGVAR     VAR(&CONFIRM) +
           VALUE('Message sent to user' *BCAT &USER)
        GOTO       CMDLBL(DONE)                       /* sending was ok */
 /*---------------------------------------------------------------------*/
 BAD:   CHGVAR     VAR(&CONFIRM) +
           VALUE('Message sending failed')
 DONE:  ENDPGM

Because servers are running in a multithreaded environment, your application programs must be thread-safe. This implies that all commands and subprograms accessed in your servers must allow multithreads.

Compile and Link the Server

Compile the server source using the IBM i command CRTBNDCL (create bound CL program).

The following example procedure demonstrates how to compile and bind an ILE CL program:

          PGM        /* Compile and Bind a CL Server program         */
 /*------------------------------------------------------------------*/ 
          DCL        VAR(&MODNAME) TYPE(*CHAR) LEN(10) VALUE(SENDMESS) 
          DCL        VAR(&LIBL) TYPE(*CHAR) LEN(10) VALUE(EXAMPLE) 
          DCL        VAR(&SRCF) TYPE(*CHAR) LEN(10) VALUE(QCLSRC)
          DCL        VAR(&OPTL) TYPE(*CHAR) LEN(10) VALUE(*NONE)
          DCL        VAR(&DBGV) TYPE(*CHAR) LEN(10) VALUE(*ALL)
 /*------------------------------------------------------------------*/
          MONMSG     MSGID(CPF6801) EXEC(GOTO CMDLBL(DONE)) 
                     /* If PF12 is pressed */ 
  
          CRTBNDCL   ??PGM(&LIBL/&MODNAME) ??SRCFILE(&LIBL/&SRCF) + 
                     ??SRCMBR(&MODNAME) DFTACTGRP(*NO) + 
                       ACTGRP(*CALLER) OUTPUT(*PRINT) + 
                       OPTIMIZE(&OPTL) DBGVIEW(&DBGV) 
    
          MONMSG     MSGID(LNC9001) EXEC(GOTO CMDLBL(ERRXT)) 
          GOTO       CMDLBL(DONE)   
 /*------------------------------------------------------------------*/ 
  ERRXT:  SNDPGMMSG  MSG('MSG: Program Linkage Failed') 
  DONE:   RETURN 
          ENDPGM

Important:
When linking/binding servers, the binding parameter ACTGRP(*CALLER) must be specified. This guarantees that the server application runs in the same activation group as the calling RPC Server.

Name the resulting server program like the program name in the IDL file and put it in a library whose name corresponds to the library name in the IDL file.

Example:

If a client performs a request that is based on the IDL program SENDMESS in the IDL library EXAMPLE, the ILE server program SENDMESS in the IBM i library EXAMPLE is executed. If no corresponding program can be found, the access will fail.

Note:
The EntireX RPC Server for IBM i of EntireX version 7.1.1 running under IBM i (AS/400) is no longer supported. We strongly recommend using the new RPC Server for AS/400 or the EntireX Adapter. See also Connection Parameters for AS/400 Connections.

Verifying the Server

To verify the server program SENDMESS, use the EntireX IDL Tester when the RPC Server for AS/400 and EntireX Broker are used.

Start of instruction setTo verify the server

  1. Confirm that an EntireX Broker and an RPC Server for AS/400 are available in your network.

  2. Make sure the IBM i host server is started on your IBM i machine.

  3. Create a Software AG IDL File using the IDL Editor as described under Create the Client/Server Interface.

  4. Start the IDL Tester.

Note:
When using the EntireX Adapter, use the Service Development perspective of the Software AG Designer for testing.

Software AG IDL to CL Mapping

This section describes the specific mapping of Software AG IDL data types to the CL programming language. See also hints and restrictions on the Software AG IDL data types valid for all programming language bindings under IDL Data Types in the IDL Editor documentation.

The following topics are covered here:

Mapping IDL Data Types to CL Data Types

In the table below, the following metasymbols and informal terms are used for the IDL.

  • The metasymbols "[" and "]" enclose optional lexical entities.

  • The informal term number (or in some cases number1.number2) is a sequence of numeric characters, for example 123.

Software AG IDL Description CL Data Type See Notes
An Alphanumeric TYPE(*CHAR) LEN(n)  
P(n - p)[.p] Packed decimal TYPE(*DEC) LEN(n [p]) 1

See also hints and restrictions on the Software AG IDL data types valid for all programming language bindings under IDL Data Types in the IDL Editor documentation.

Notes:

  1. n must be less than or equal to 15. The maximum value for p is 9.
    For example, the IDL definition P10.2 corresponds to TYPE(*DEC) LEN(12 2)

Other IDL data types have no appropriate equivalent in the CL language.

Mapping Program and Library Names

Do not use the special characters '#', '$', '&', '+', '-', '.', '/' and '@' within names of programs and libraries in the IDL file. These characters are not allowed within names of server programs and libraries created on IBM i.

Mapping Arrays, Groups and Structures

Arrays, Groups and Structures are not supported for the CL language.

Mapping the Direction Attributes In, Out, InOut

The IDL syntax allows you to define parameters as IN parameters, OUT parameters, or IN OUT parameters (which is the default if nothing is specified). This direction specification is reflected in the stubless call of the RPC Server as follows:

  • Direction attributes do not change the call interface because parameters are always treated as "called by reference".

  • Usage of direction attributes may be useful to reduce data traffic between RPC client and RPC server.

  • Parameters with the IN attribute are sent from the RPC client to the RPC server.

  • Parameters with the OUT attribute are sent from the RPC server to the RPC client.

  • Parameters with the IN and OUT attribute are sent from the RPC client to the RPC server and then back to the RPC client.

Note that only the direction information of the top-level fields (Level 1) is relevant. Group fields always inherit the specification from their parent. A different specification is ignored.

See the attribute-list under Software AG IDL Grammar in the IDL Editor documentation for the syntax on how to describe attributes within the Software AG IDL file and refer to direction-attribute.