EntireX Security under z/OS

This document introduces EntireX Security under z/OS through overviews of the functionality and components of EntireX Security. The location where Broker Kernel is installed determines the functionality made available for EntireX Security. This document covers the following topics:

Note:
Installation of the security software is described under Installing EntireX Security under z/OS.


Functionality of EntireX Security

This table lists the security functionality available with EntireX Security running broker kernel under the respective operating system.

Security Functionality z/OS UNIX Windows BS2000 z/VSE Comment
Authentication of user Yes Yes Yes Yes Yes Verify broker user ID and broker password sent by an application to the broker. Under z/OS the broker verifies a long broker password as a RACF password phrase.
User password change Yes No No No No  
LDAP authentication No Yes Yes No No Authenticate using LDAP repository.
Trusted user ID Yes No No No No Trusted computer base, avoiding plain text password.
Verified client user ID Yes No No Yes Yes Provide verified identity of client to server.
Authorization of client request Yes No No No No  
Authorization of server register Yes No No No No  
Authorize IP connection Yes No No No No  
Authorization rules No Yes Yes No No An authorization rule is used to perform access checks for authenticated user IDs against lists of services defined within the rule. This feature is available on UNIX and Windows using EntireX Security on these platforms. Authorization rules can be stored in the Broker attribute file or in an LDAP repository. See Authorization Rules.
SSL/TLS (1) Yes Yes No (2) Industry standard encryption mechanism. See SSL/TLS and Certificates with EntireX.

Notes:

  1. Establishing an SSL/TLS connection on z/OS is done with IBM's Application Transparent Transport Layer Security (AT-TLS)
  2. Establishing an SSL/TLS connection on z/VSE requires BSI's Automatic Transport Layer Security (ATLS).

EntireX Security Components

This diagram depicts the location where the broker kernel must be installed and where the broker stubs can be installed. It also depicts the location of the security components of the kernel and stubs of broker.

Overview of EntireX Security

The broker acts as an agent to make the creation and operation of client/server applications simpler and more effective. Any number of server applications can be built for use by any number of clients. EntireX Security allows you to protect your server applications and clients independently. Clients and servers are authenticated by user ID and password on their first contact with the system.

Configuration Options for Broker

This section describes the parameters for configuring EntireX Security under z/OS. You may either accept or modify the default settings which are specified in the Broker attribute file DEFAULTS=SECURITY. Always check installation options against the corresponding resource profile. See Resource Profiles in EntireX Security.

This section covers the following topics:

See also Security-specific Attributes and Operator Commands.

Authentication

Authentication is mandatory and performed for both client and server applications based on user ID and password. First contact with the Broker results in the host security system being referenced. If authentication fails, access is denied and the application is informed with a suitable error message.

An Implicit Logon is possible where the attribute file contains AUTOLOGON=YES. This means the first command you issue does not have to be LOGON. In this case the application must supply user ID and password credentials for commands SEND or REGISTER.

Authentication expires after a period of non-activity after which it must be repeated. User ID and password must be resupplied before further access is possible. The time limits CLIENT-NONACT and SERVER-NONACT determine these timeout periods and are defined in the Broker attribute file.

For more information see Authentication under Writing Applications using EntireX Security in the ACI Programming documentation.

Trusted User ID

No password is required for applications executing under mainframe where the trusted user ID option is implemented. This is true for both client and server application components. EntireX Security automatically acquires the logged-on user ID. Utilizing the "trusted" user ID avoids having to supply the password again. It also requires customers to configure security for their mainframe environment(s), for example ensuring that the CICS system is protected by RACF. Applications must not provide a password if they intend to use trusted user ID, see Enable Trusted User ID (Optional) under Installing EntireX Security under z/OS. Activate this option with Security-specific broker attribute TRUSTED-USERID:

TRUSTED-USERID=N Require user ID/password for z/OS application components.
TRUSTED-USERID=Y Leverage trusted user ID mechanism for z/OS applications.

Make sure the Adabas Security Interface is enabled by specifying the following parameter in the source assembled by job member WALvrs.JOBS(ASMGBLS):

SAF=YES Adabas Security Interface in use.

Request Authorization

Clients request distributed processing using the SEND command, indicating the class, name and service to be invoked. The Broker transmits the request to the server only if the client has access to the relevant resource profile. Similarly, servers are allowed to REGISTER services only if the server has access to the resource profile. The default profile make-up comprises class.name.service of the service. The following system parameters will modify the resource profile if required:

INCLUDE-CLASS ={YES,NO} Include Class in resource check.
INCLUDE-NAME ={YES,NO} Include Name in resource check.
INCLUDE-SERVICE ={YES,NO} Include Service in resource check.

Note:
At least one option must be "YES" for authorization to be performed.

For example: if INCLUDE-CLASS=YES, INCLUDE-NAME=YES and INCLUDE-SERVICE=YES, the structure of the resource profile checked is:

<class_name>.<server_name>.<service_name>

But with INCLUDE-CLASS=YES, INCLUDE-NAME=NO and INCLUDE-SERVICE=YES, the profile would look like:

<class_name>.<service_name>

Alternatively, with INCLUDE-CLASS=NO, INCLUDE-NAME=YES and INCLUDE-SERVICE=YES, the resource profile to be checked is:

<server_name>.<service_name>

Clients require READ access to obtain processing from a server application and servers require CONTROL access in order to REGISTER successfully, otherwise the command is rejected.

Discrete or generic resource profiles can be defined for this purpose.

Note:
If you set SECURITY-NODE, the Broker ID is used as a prefix for all authorization checks.

Request Authorization for Command and Info Services

If you are using one of the following RPC servers with a broker protected by, for example, RACF or CA Top Secret, at least READ access is required to resources SAG.ETBCIS.INFO and SAG.ETBCIS.CMD.

  • RPC Server for CICS ECI

  • RPC Server for IMS Connect

  • RPC Server for Micro Focus

  • RPC-ACI Bridge

  • RPC Server for IBM MQ

  • RPC Server for Java

  • RPC Server for XML/SOAP

Ignore Security Token

A security token is generated by EntireX. It is the responsibility of the application to clear the security token before making the first call and thereafter to maintain the contents of the field for the duration of communication for the user.

If validation of security token is not required - for example, where applications or packages do not maintain the security token in the ACI control block - this option may be switched off. The default setting is "NO" (do not ignore Security Token).

IGNORE-STOKEN={YES,NO} Do not ignore Security Token.

Authorize IP Connection

Communication between distributed application components and the Broker via TCP/IP can be subject to an authorization check at connection time. Define the following system parameter if this option is required:

CHECK-IP-ADDRESS={YES,NO} Authorize IP connection.

Access to Undefined Resources

The normal mode of operation is to prevent access to resources not defined to the security system. Profiles representing services are added to the security repository with either a default access or by granting access to specific users and groups. Access to undefined resources can be permitted using the following system parameter:

UNIVERSAL={YES,NO} Allow access to undefined resources.

Note:
This option does not permit access to resources defined with universal access "none". See also note on defining resources to ACF.

Alternate Resource Class/Type Names

By default, the resource class/type NBKSAG is used when performing authorization checks. The name of an alternate resource class can be specified using the following system parameter:

SAF-CLASS=NBKSAG Resource class for Broker.

Length of Resource Class/Type Profile

By default, the maximum length of the resource class/type profiles is 80 characters when performing authorization checks. Longer resource profiles can be checked by increasing the maximum resource profile length as follows. Make sure you also increase the maximum profile length in the SAF Class/Type Descriptor table in z/OS.

MAX-SAF-PROF-LENGTH=<nn> Max resource profile length.

Password to Uppercase

To cater for situations where a site is in transition from uppercase to mixed case passwords setting this parameter can convert all passwords to uppercase. It is not recommended you use this option by default.

PASSWORD-TO-UPPER-CASE={NO,YES} Convert password to uppercase.

Security Level

The following parameters can be used to modify the functionality of EntireX Security:

SECURITY-LEVEL=AUTHENTICATION User authentication is performed but without any resource authorization (the normal default operation).
SECURITY-LEVEL=AUTHORIZATION User authentication and resource authorization are both applied.

Note:
In version 8.0, the default value for this parameter was "AUTHORIZATION".

Verified Client User ID

It is often important for server applications to know the identity of the client issuing the request. For this reason, the Broker kernel communicates the ACI field CLIENT-UID to the server application during the RECEIVE function. EntireX Security guarantees that the CLIENT-UID has been formally authenticated. EntireX Security automatically substitutes the value from trusted user ID where this is applicable.

Note:
There is an uppercase translation when the USER-ID field is propagated to the CLIENT-UID field under EntireX Security when the broker kernel is running under z/OS.

PROPAGATE‑TRUSTED‑USERID=YES Set ACI field CLIENT-UID to the user ID of the client. This will be authenticated by EntireX Security and may be obtained according to the trusted user ID mechanism where installed.
PROPAGATE‑TRUSTED‑USERID=NO Do not set this value unless explicitly instructed to do so by Software AG support.

Security Node

This parameter can be used to specify a prefix which is added to all authorization checks, hence enabling broker kernels in different environments to perform authorization checks on different sets of resource profiles. For example, it is often important to distinguish among production, test, and development environments when performing authorization checks. The following settings are available:

SECURITY-NODE=YES This causes the Broker ID - i.e., ETB113 - to be used as a prefix for all authorization checks.
SECURITY-NODE=<node_name> This will utilize the string "node_name" (maximum 8 characters) as the prefix for all authorization checks.
SECURITY-NODE=NO This causes the actual text (max 8 characters) to be prefixed onto all authorization checks..

Client RPC Authorization

For services supporting Natural RPC or other applications that know RPC, you can optionally perform authorization checks on the client making the RPC request by defining the "per service" attribute CLIENT-RPC-AUTHORIZATION=YES in the Broker attribute file. Setting this parameter to "YES" will cause the RPC library and program names to be appended to the profile associated with the authorization check. The resource profile would then appear as follows:

Class.server.service.rpc-library.rpc-program

Note:
Natural Security performs its resource authorization checks as follows:

<prefix-character>.rpc-library.rpc-program

To allow conformity with Natural Security, the CLIENT-RPC-AUTHORIZATION parameter can optionally be defined with a prefix character as follows:

CLIENT-RPC-AUTHORIZATION=(YES,<prefix-character>)

Considerations for Mainframe Natural Application Components

Application components running in a mainframe Natural environment which communicate using EntireX Broker interact with EntireX Security in the following ways:

  • No password is required for applications executing under mainframe Natural where the trusted user ID option is implemented. This is true for both client and server application components. EntireX Security automatically acquires the logged-on user ID. Utilizing the trusted user ID avoids having to supply the password again. It also requires the customers to configure security for their mainframe environment(s), for example,ensuring that the CICS system is protected by RACF.

  • Applications can override the trusted user ID by supplying a valid user ID/password combination in the ACI control block. This causes EntireX Security to ignore the trusted user ID in favor of the supplied credentials. Applications must therefore ensure that they do not assign an incorrect user ID or spurious password to the ACI control block, where trusted user ID is implemented. The CLIENT-ID as conveyed in the ACI to the server component of the application now represents the client's verified user ID, derived either from valid user ID/password credentials or from trusted user ID itself.

Resource Profiles in EntireX Security

This section describes the definitions required in the SAF repository according to the underlying security system used (RACF, CA ACF2, CA Top Secret). It covers the following topics:

Introduction

EntireX Security enables the secure deployment of EntireX Broker. This involves defining the resource profiles in the SAF repository to protect all distributed and mainframe application components. This philosophy is consistent with maintaining a single user ID and password.

Each SAF security system provides the facilities required for maintaining resource profiles.

RACF enables the grouping of similar resource profiles into a resource Class. CA ACF2 provides resource types which give equivalent functionality.

The name of the SAF class/type used to hold the EntireX-related resource profiles is specified with the Security-specific attribute SAF-CLASS. Default is NBKSAG.

The default length of the resource profile is 80 bytes, and this can be increased if necessary. See MAX-SAF-PROF-LENGTH. If you increase the maximum profile length, you must also increase the maximum profile length defined in the RACF class descriptor table.

Format of Resource Profiles

This section describes the format of various resource profiles. Note that the specific contents of resource files themselves will vary, depending upon the configuration options specified in the Security-specific Attributes.

EntireX Broker Client/Server

Resource profiles protecting Broker client and server applications normally comprise Broker class, name and service. It is possible to omit any of these components from the resource profile. See also Request Authorization. The following resource profile shows an example service:

ETB.POLICY.QUOTE1

Client applications must execute with a user ID that has READ access to allow them to send to the given service. Registration of services is also secured. Server applications require CONTROL access to register a service with the Broker.

EntireX Broker TCP/IP Address Verification

If optional TCP/IP address checking is required at authentication time, the relevant resource profiles must be defined in the security system. Users will require READ access in order to connect, using TCP/IP, from a particular address. A typical TCP/IP address would be entered in the security system as follows:

247.72.46.239

Note:
You can perform TCP/IP address checking by setting CHECK-IP-ADDRESS=YES. This results in an authorization check for the IP address for the user ID under which EntireX Broker itself executes.

Command and Information Services

Access to Command and Information Services is controlled by permitting, or denying, access to Software AG supplied services which implement Command and Information Services.

For a complete list of profiles representing these services, see Authorization for Command and Information Services.

For more information see Security with Command and Information Services.

Resource Definitions

This section describes the definitions required in the various supported security systems in order to enable Security for EntireX resources. These definitions are described in the following subsections:

Note:
Define resources using uppercase characters only.

Defining Resources to RACF

This section defines how the EntireX resources are defined to RACF. For exact details of the procedures to be followed for the installed RACF version, consult the relevant IBM manuals.

Overview of tasks:

  • Add classes to class descriptor table

  • Update z/OS router table

  • Activate new classes

  • Assign user ID for the Broker started task, if you have not done so already

  • Permit user access to resource profiles

  • Optimize the performance of RAC authorization checks

Start of instruction setTo add classes to class descriptor table

  1. Add the resource classes to the RACF class descriptor table. Refer to the IBM SPL RACF manual.

    For an example, see IBM SYS1.SAMPLIB, member RACINSTL.

  2. You must allocate a class descriptor length for class NBKSAG of 80 bytes in order to prevent the possibility of a system 282 abend, which could occur if the length of your resource (class/server/service) exceeds the length known to RACF. The maximum length allowed by EntireX is 80 bytes, so allow 80 bytes in the RACF class descriptor table.

  3. Define the classes to enable discrete and generic profile use.

  4. Check further attributes controlling the level of RACF messages generated when performing RACROUTE calls, as well as the required level of SMF recording. Sample definitions are provided in source member RACFCLSX.

Start of instruction setTo update z/OS router table

  • Update the z/OS router table as described in the IBM SPL RACF manual. For an example, see the IBM SYS1.SAMPLIB, member RACINSTL, section RFTABLE.

Start of instruction setTo activate new classes

  • Activate new resource classes with SETROPTS (see IBM RACF Command Language Reference manual). For an example, activate class NBKSAG:

    SETROPTS CLASSACT(NBKSAG)
    SETROPTS GENCMD(NBKSAG)
    SETROPTS GENERIC(NBKSAG)

Start of instruction setTo assign user ID for the Broker started task

  • The EntireX Security functions are performed within the address space of EntireX Broker. Assign a user ID to the Broker started task with the relevant RACF authorizations, including the ability to perform RACROUTE, TYPE=EXTRACT, TYPE=AUTH and TYPE=VERIFY calls on profiles belonging to the defined classes.

Start of instruction setTo permit user access to resource profiles

  • After adding profiles to protect the different resources, permits users the required level of access, using the relevant RACF commands. The following example adds resource profile ETB.POLICY.QUOTE1 and grants read access to user ID USER2 and control access to USER3. USER2 represents a client and requires read access to execute while USER3 represents a server component which needs control access to register:

    RDEFINE NBKSAG ETB.POLICY.QUOTE1 UACC(NONE)
    PERMIT ETB.POLICY.QUOTE1 CLASS(NBKSAG) ACCESS(READ) ID(USER2)
    PERMIT ETB.POLICY.QUOTE1 CLASS(NBKSAG) ACCESS(CONTROL) ID(USER3)
  • If you utilize authorization checks based upon TCP/IP address (TCP transport only) then define these resource definitions (RDEFINE) as follows and PERMIT the appropriate user read access as shown:

    RDEFINE NBKSAG 247.72.46.239 UACC(NONE)
    PERMIT 247.72.46.239 CLASS(NBKSAG) ACCESS(READ) ID(USER42)

Start of instruction setTo optimize the performance of RACF authorization checks

  • Use SETROPTS RACLIST(NBKSAG) to cache in memory the RACF general resource profiles belonging to class NBKSAG. If you use a RACF resource class other than NBKSAG, make sure this RACF general resource class is cached in memory.

Defining Resources to CA Top Secret

This section defines how the EntireX classes are defined to CA Top Secret. For exact details of the procedures to be followed for the installed version of CA Top Secret, consult the relevant CA Top Secret manual.

Overview of tasks:

  • Add CA Top Secret Facility

  • Assign user ID for the Broker started task, if you have not done so already

  • Add procedure name for the started task

  • Add resource type to resource definition table

  • Assign ownership of resources

  • Permit defined resources to users

Start of instruction setTo add CA Top Secret Facility

  • CA Top Secret enables a set of authorization checks to be made against a certain facility. For example, this can be used to secure the development environment SAGDEV separately from the production environment SAGPROD. Alternatively, a default facility of batch can be used.

    To add additional facilities, use the following commands:

    AUTHINIT,MULTIUSER,NONPWR,PGM=ETBNUC,NOABEND

Start of instruction setTo assign a user ID for the Broker started task

  • Add one user ID for each instance of the Broker started task.

    If required, different facilities can be assigned to development and production started tasks.

    The designated facility is assigned to the started task user ID:

    TSS CRE(user-id) DEPT(dept) MASTFAC(fac)

Start of instruction setTo add a procedure name for the Broker started task

  • The procedure name under which the Broker started task executes must be defined to CA Top Secret.

    TSS ADD(STC) PROC(proc) ACID(user-id)

Start of instruction setTo add resource type to resource definition table

  • Add the resource types to the CA Top Secret resource definition table (RDT). Resource definitions relating to EntireX are kept in resource type NBKSAG. Refer to the CA Top Secret Reference Guide for a detailed explanation of the following commands and arguments:

    TSS ADD(RDT) RESCLASS(NBKSAG)
    RESCODE(HEXCODE)
    ATTR(LONG)
    ACLST(NONE,READ,CONTROL)
    DEFACC(NONE)

Start of instruction setTo assign ownership of resources

  • Assign ownership to a particular resource as shown in the following example. This must be done before permitting access to defined resource profiles:

    TSS ADD(user1) NBKSAG(etb.policy.quote1)

    This makes user user1 the owner of the Broker service etb.policy.quote1.

    Similarly, to add ownership to profiles used to control access based on TCP/IP address (TCP communications only) follow the steps below. This makes user4 the owner of this resource profile:

    TSS ADD(user4) NBKSAG(247.72.46.239)

Start of instruction setTo permit defined resource to users

  • Permit access to a resource profile as in the following example. In the example, user user2 is permitted read access to the Broker service etb.policy.quote1. This enables the user to execute as a client and issue requests to this Broker service:

    TSS PER(user2) NBKSAG(etb.policy.quote1) FAC(fac) ACCESS(READ)

    Similarly, to permit access to profiles used to control access based on TCP/IP address, use the PER command as shown:

    TSS PER(user42) NBKSAG(247.72.46.239) FAC(fac) ACCESS(READ)

Defining Resources to CA ACF2

See also your CA ACF2 documentation.

Note:
CA ACF2 provides insufficient return codes to determine whether a resource profile does not exist or simply the user does not have access to it. Therefore, if access is denied by CA ACF2, EntireX Security will always report "Access denied resource not allowed" in the error message.

Start of instruction setTo define resources to CA ACF2

  1. The Broker or Broker Services started task executes as a normal started task in z/OS. Define the user ID of started task to CA ACF2 with the following attributes:

    MUSASS, STC

  2. Insert SAFDEF records as follows:

    SAFDEF.EXS1
    FUNCRET(4) FUNCRSN(0) ID(ENTIREX) MODE(GLOBAL)
    RACROUTE(REQUEST=VERIFY SUBSYS=ETBNUC REQSTOR=-)
    RETCODE(4)
    
    SAFDEF.EXS2
    FUNCRET(4) FUNCRSN(0) ID(ENTIREX) MODE(GLOBAL)
    RACROUTE(REQUEST=AUTH SUBSYS=ETBNUC REQSTOR=-)
    RETCODE(4)
    
    SAFDEF.EXS3
    FUNCRET(4) FUNCRSN(0) ID(ENTIREX) MODE(GLOBAL)
    RACROUTE(REQUEST=EXTRACT SUBSYS=ETBNUC REQSTOR=-)
    RETCODE(4)
  3. For the general resource class name used by EntireX Security, define a 3-character CA ACF2 resource type code by inserting a CLASMAP record as follows:

    CLASMAP
    ENTITYLN(0) MUSID() RESOURCE(NBKSAG) RSRCTYPE(NBK)
  4. Define the required security profiles to CA ACF2 using the new type code.

    The following example shows the addition of a Broker service etb.policy.quote1, allowing read access only for user ID user2:

    $KEY(ETB) TYPE(NBK) 
    policy.quote1 UID(user2) SERVICE(READ)   ALLOW
    policy.quote1 UID(-)                     PREVENT

    A service level of DELETE is required for a service to register (this is functionally the same as CONTROL access in RACF).

    The following example secures the TCP/IP connection for checking at authentication time for the TCP/IP address of 247.72.46.239 granting access to all users, except U402451.

    $KEY(247) TYPE(NBK)
    72.46.239 UID(u402451) SERVICE(READ) PREVENT 
    72.46.239 UID(-) SERVICE(READ) ALLOW