This page explains unit of work and persistence messages from the EntireX Broker Log and Console. These messages have the format:
ETBWnnnn
where | ETBW | is the message class, and |
nnnn | is the message number in the range 0000-9999 |
ETBW0138 | ETBW0145 | ETBW0313 | ETBW0314 | ETBW0317 | ETBW0318 | ETBW0330 | ETBW0331 | ETBW0332 | ETBW0333 | ETBW0334 | ETBW0354 | ETBW0426 | ETBW0506 | ETBW0517 | ETBW0521 | ETBW0526 | ETBW0537 | ETBW0595 | ETBW0607 | ETBW0616 | ETBW0618 | ETBW0636 | ETBW0640 | ETBW0663 | ETBW0684 | ETBW0686 | ETBW0786 | ETBW0809 | ETBW0811 | ETBW0916 | ETBW0940 | ETBW0947
ETBW0138 | PSI: Maximum Extents used for Cell Pool |
Explanation |
The Broker detected that the persistent store has no more cells available for cell pool xxxxxxxx (see diagnostic message ETBD0286 next to additional info for the name of the cell pool) and the maximum number of extents have been reached. |
Action |
Review the persistent store startup parameters and increase the initial allocation value for the exhausted cell pool. For the new value to take effect, you must cold start the persistent store and restart the Broker. |
ETBW0145 | PSI: Attempt to expand beyond Dataspace Boundary |
Explanation |
The Broker attempted to expand the persistent store beyond the dataspace boundary. |
Action |
Review the persistent store startup parameter for dataspace pages and increase accordingly to an appropriate value. Restart the Broker. |
ETBW0313 | Broker RESTART failed |
Explanation |
During broker startup, an error has been detected during the restart processing phase. |
Action |
Examine the EntireX Broker log. Determine the cause of the error. Correct the error and restart the Broker. If the cause cannot be determined, contact Software AG support. |
ETBW0314 | API: UOW status invalid |
Explanation |
The unit of work status code is not a recognized value. |
Action |
This is probably an internal EntireX Broker error. Contact Software AG support. |
ETBW0317 | PSI: Persistent Store termination failed |
Explanation |
An attempt to shut down the persistent store failed. |
Action |
None. |
ETBW0318 | PSI: Function input parms invalid |
Explanation |
The requested persistent store function is not supported by the PSTORE handler. The request is ignored. |
Action |
Contact Software AG support. |
ETBW0330 | PSI: Restart-Temp Msg File Open Failed |
Explanation |
This is an internal error. |
Action |
Contact Software AG support. |
ETBW0331 | PSI: Restart-Temp Msg IDX Open Failed |
Explanation |
This is an internal error. |
Action |
Contact Software AG support. |
ETBW0332 | PSI: Restart-Msg Index Length Zero |
Explanation |
This is an internal error. |
Action |
Contact Software AG support. |
ETBW0333 | PSI: Restart-Msg File Read Failure |
Explanation |
This is an internal error. |
Action |
Contact Software AG support. |
ETBW0334 | PSI: Restart-Temp Msg File Write Failure |
Explanation |
This is an internal error. |
Action |
Contact Software AG support. |
ETBW0354 | EntireX License Key Error |
Explanation |
Your EntireX License has expired. |
Action |
Please contact your local Software AG office or distributor to extend your license. |
ETBW0426 | Start of ETB_SHUTDOWN thread failed |
Explanation |
UNIX/Windows only. The "etbnuc" process encountered an error while creating shutdown thread. Broker could not be initialized. |
Action |
Contact Software AG support. |
ETBW0506 | ** Communicator not available anymore ** |
Explanation |
The Communication Manager of the transport layer stops due to unrecoverable errors, exceeded retry limit or shutdown. |
Action |
Check the log file for error messages. Ignore this warning if shutdown was requested. |
ETBW0517 | Terminate Restart Handling |
Explanation |
The Communication Manager did not succeed in running the transport-specific Communicator. All attempts to restart the Communicator were not successful. |
Action |
Check the log file for error messages. |
ETBW0521 | Unexpected Communicator Nucleus Status |
Explanation |
A component of the transport layer detected an unexpected status and will stop immediately. |
Action |
Check the log file for error messages or shutdown. |
ETBW0526 | Broker kernel not running with Security |
Explanation |
An operator command was issued that interacts with Broker's security component. However, security was not activated for this Broker. |
Action |
Do not issue security relevant operator commands without activating security. |
ETBW0537 | Ambiguous: CONVERSION and TRANSLATION |
Explanation |
Broker detected that attributes of the indicated service specify both
|
Action |
For a full migration from |
ETBW0595 | This PSTORE-TYPE is not supported |
Explanation |
This |
Action |
Enter valid |
ETBW0607 | Command logging switched off |
Explanation |
Command logging was requested. However, it is not possible to switch on command logging due to configuration errors. |
Action |
Fix the problem and switch on command logging. |
ETBW0616 | CPU limit reached |
Explanation |
The CPU time of the task is exceeded. Broker received the interrupt from the operating system and will go down. |
Action |
Specify a |
ETBW0618 | Transport not active |
Explanation |
The transport-specific operator command cannot be executed. The transport is currently not active. |
Action |
Issue the operator command when the transport is active. |
ETBW0636 | No assignment for PARSER Report |
Explanation |
The PARSER report was requested but the file assignment is missing. |
Action |
Specify DD name |
ETBW0640 | EntireX License Key Warning |
Explanation |
A warning occurred while processing the EntireX License file. Additional error test will provide more information. |
Action |
Consult the additional error text and take appropriate action. |
ETBW0663 | No assignment for LICENSE Report |
Explanation |
Under z/OS and BS2000, the license is printed during startup. However, the assignment for the license report output file is missing. |
Action |
Assign the license report output file. |
ETBW0684 | Cannot make Broker non-swappable |
Explanation |
Broker not APF-authorized. |
Action |
Ensure that all load libraries in the Broker kernel steplib are APF-authorized. |
ETBW0686 | Requested service(s) not found |
Explanation |
Shutdown service failed. The service was not used by servers. |
Action |
None. |
ETBW0786 | CONVERSION=SAGTRPC ignored. CONVERSION=SAGTCHA used. |
Explanation |
An incorrect character conversion configuration for a broker service ( |
Action |
Correct the Broker attribute file. See Broker's Mechanism for Choosing the Character Conversion Approach under Introduction to Internationalization. |
ETBW0809 | No assignment for CONFIG Report |
Explanation |
The |
Action |
Specify DD name |
ETBW0811 | No assignment for MODULE Report |
Explanation |
The |
Action |
Specify DD name |
ETBW0916 | :1: of max :2: connections in use |
Explanation |
The defined percentage value defined with broker attribute |
Action |
None. This message is for information purposes only. |
ETBW0940 | ARF SINGLE-CONV-MODE and PSTORE=NO |
Explanation |
This may indicate a configuration problem with Broker. Adabas Event Replication usually needs a Broker with a persistent store. However, this Broker is currently running without persistent store. |
Action |
Stop Broker, configure a persistent store and start Broker with |
ETBW0947 | No assignment for TASK Report |
Explanation |
The TASK report was requested but the file assignment is missing. |
Action |
None. |