This page explains diagnostic messages from the EntireX Broker Log and Console. These messages have the format:
ETBDnnnn
where | ETBD | is the message class, and |
nnnn | is the message number in the range 0000-9999 |
ETBD0280 | ETBD0281 | ETBD0282 | ETBD0283 | ETBD0284 | ETBD0285 | ETBD0286 | ETBD0287 | ETBD0288 | ETBD0289 | ETBD0295 | ETBD0296 | ETBD0297 | ETBD0298 | ETBD0303 | ETBD0324 | ETBD0325 | ETBD0353 | ETBD0436 | ETBD0442 | ETBD0443 | ETBD0444 | ETBD0471 | ETBD0518 | ETBD0519 | ETBD0520 | ETBD0552 | ETBD0553 | ETBD0556 | ETBD0557 | ETBD0560 | ETBD0565 | ETBD0658 | ETBD0665 | ETBD0672 | ETBD0677 | ETBD0678 | ETBD0665 | ETBD0694 | ETBD0735 | ETBD0736 | ETBD0943
ETBD0280 | Function Entered |
Explanation |
This message is written to the log data set when tracing is set to a trace level greater than 1. An EntireX Broker internal function module is entered. |
Action |
This message is for diagnostic purposes only. |
ETBD0281 | Cleaned Up: |
Explanation |
This message is written to the log data set from the TOM task when tracing is set to a trace level greater than 0. Resources used internally (CCBs, PCBs and SCBs) are made available again for reuse. |
Action |
This message is for diagnostic purposes only. |
ETBD0282 | SPFX Values: |
Explanation |
This message is written to the log data set from the worker tasks when tracing is set to any trace level greater than 0. It reports the incoming and outgoing calls to EntireX Broker. |
Action |
This message is for diagnostic purposes only. |
ETBD0283 | EntireX Broker Memory Pool Allocations: |
Explanation |
This message is written to the log data set from the EntireX Broker main task for any trace level including level 0. It provides addresses and lengths for all memory pools allocated during Broker initialization processing. |
Action |
This message is for diagnostic purposes only. |
ETBD0284 | Sizes of Broker Memory Pool |
Explanation |
This message is written to the log data set from the EntireX Broker dispatcher task for any trace level including level 0. It provides the length of the virtual memory to be allocated during initialization processing and is divided into several parts, each part concerning a Broker-related object such as conversations or messages. |
Action |
This message is for diagnostic purposes only. |
ETBD0285 | ************* NEW REQUEST ************ |
Explanation |
This message is written to the log data set from the worker tasks when tracing is set to any trace level greater than 1. At this point, the trace for a new call to EntireX Broker begins. |
Action |
This message is for diagnostic purposes only. |
ETBD0286 | Diagnostic Value |
Explanation |
This message is used as header line for various diagnostic messages. |
Action |
None. |
ETBD0287 | EntireX Broker Startup Attributes: |
Explanation |
This message provides information about the global attributes read from the Broker attribute file. It is written to the log data set from the EntireX Broker dispatcher task for any trace level including Level 0. |
Action |
This message is for diagnostic purposes only. |
ETBD0288 | Function completed |
Explanation |
Diagnostic output. |
Action |
None. |
ETBD0289 | %s |
Explanation |
These are messages of the exception handler and provide information about an abnormal error. |
Action |
Contact Software AG support. |
ETBD0295 | Signal received! |
Explanation |
An abnormal error has occurred. The process ID and the signal number are written to the Broker error log. |
Action |
Contact Software AG support. |
ETBD0296 | Additional Information |
Explanation |
This is the first message after error messages that require additional diagnostic data (for example, for any security violations). It is written to the EntireX Broker log file for any trace level including level 0. |
Action |
This message is for diagnostic purposes only. |
ETBD0297 | ETB_SHUTDOWN semaphore posted |
Explanation |
The shutdown semaphore has been posted. The broker kernel will shutdown. |
Action |
This message is for diagnostic purposes only. |
ETBD0298 | Exit Message |
Explanation |
A messages with this number is issued by a user exit, and the meaning of the message depends on the context of the exit that issued it. |
Action |
Depends on exit that issued the message. |
ETBD0303 | Command logging file information |
Explanation |
Information on a z/OS command logging output file is displayed. |
Action |
This message is for diagnostic purposes only. |
ETBD0324 | CLOG file 1 is now ready to be copied |
Explanation |
The first command logging output file ( |
Action |
This message is for diagnostic purposes only. |
ETBD0325 | CLOG file 2 is now ready to be copied |
Explanation |
The second command logging output file ( |
Action |
This message is for diagnostic purposes only. |
ETBD0353 | Contents of ICU data directory: |
Explanation |
The contents of the ICU data directory are listed. |
Action |
None. |
ETBD0436 | Service attributes |
Explanation |
This message informs about service attributes and is written to the log when tracing is set to any trace level greater than 4. |
Action |
None. |
ETBD0442 | RESTART: Processing starting |
Explanation |
This informs the Administrator about the start of the persistent store restore processing. |
Action |
None. |
ETBD0443 | RESTART: Processing finished |
Explanation |
This informs the Administrator about the finished restore processing of the persistent store. |
Action |
None. |
ETBD0444 | Shutdown Statistics: |
Explanation |
This message is written to the log data set when the Broker shuts down after a successful execution. Shutdown statistics and other information are written directly following this message in the log. |
Action |
This message is for diagnostic purposes only. |
ETBD0471 | Topic attributes |
Explanation |
This message informs about Topic attributes and is written to the log when tracing is set to any trace level greater than 4. |
Action |
None. |
ETBD0518 | EntireX Broker ADABAS Attributes: |
Explanation |
This message provides information on all |
Action |
None. |
ETBD0519 | EntireX Broker c-tree Attributes: |
Explanation |
This message provides information on all |
Action |
None. |
ETBD0520 | EntireX Broker DIV Attributes: |
Explanation |
This message provides information on all |
Action |
None. |
ETBD0552 | EntireX Broker SSL Attributes |
Explanation |
This message informs about all |
Action |
None. |
ETBD0553 | EntireX Broker NET Attributes: |
Explanation |
This message informs about all |
Action |
None. |
ETBD0556 | Thread [re]started |
Explanation |
This message informs the Administrator about the start of a Broker thread. This message is written to the log when tracing is set to any trace level greater than 0. |
Action |
None. |
ETBD0557 | Thread stopped |
Explanation |
This message informs the Administrator about the stop of a Broker thread. This message is written to the log when tracing is set to any trace level greater than 0. |
Action |
None. |
ETBD0560 | EntireX Broker TCP/IP Attributes |
Explanation |
This message informs about all |
Action |
None. |
ETBD0565 | z/VSE operating system information |
Explanation |
z/VSE operating system information is displayed. |
Action |
This message is for diagnostic purposes only. |
ETBD0658 | EntireX Broker Memory Pool Settings: |
Explanation |
This message is written to the log data set from the EntireX Broker main task for any trace level including level 0. It provides a summary of pools scheduled for allocation and the number of slots per pool. |
Action |
This message is for diagnostic purposes only. |
ETBD0665 | EntireX Broker AUTH-RULES Attributes: |
Explanation |
This message provides information on |
Action |
None. |
ETBD0672 | Broker Memory Pool Deallocation: |
Explanation |
This message is written to the log data set from the EntireX Broker main task for any trace level including level 0. It provides addresses and lengths for all memory pools deallocated during Broker termination processing. |
Action |
This message is for diagnostic purposes only. |
ETBD0677 | RESTART: PSTORE rebuild started |
Explanation |
The persistent store was not properly finalized. The restart procedure detected an inconsistency that needs to be repaired. The rebuild procedure was just started to re-create the affected files. |
Action |
No action required. |
ETBD0678 | RESTART: PSTORE rebuild stopped |
Explanation |
The rebuild procedure was stopped. |
Action |
No action required. |
ETBD0665 | EntireX Broker AUTH-RULES Attributes: |
Explanation |
This message provides information on |
Action |
None. |
ETBD0694 | EntireX Broker SECURITY Attributes: |
Explanation |
This message provides information on |
Action |
None. |
ETBD0735 | Unload Object |
Explanation |
This message informs the Administrator about the unload of a persistent store record. This message is written to the log when tracing is set to any trace level greater than 0. |
Action |
None. |
ETBD0736 | Upload Object |
Explanation |
This message informs the Administrator about the upload of a persistent store record. This message is written to the log when tracing is set to any trace level greater than 0. |
Action |
None. |
ETBD0943 | AppMon string: |
Explanation |
The application monitoring data is displayed. |
Action |
None. |