Software AG Products 10.7 | Using API Gateway | API Gateway Administration | Security Configuration | Custom Assertions | Example: Custom Assertions
 
Example: Custom Assertions
API Gateway, by default, uses the asymmetric binding assertion with X.509v3 token for implementing SOAP message protection. If you would like to enforce any authentication (other than the predefined authentications shipped with API Gateway), include additional WSS custom assertions, sign and encrypt SOAP messages, and define custom properties, such as the algorithms and layout of security header, you can create custom assertions that would construct the custom policy file to suit your specific security requirements.
Following is a policy file that API Gateway generates when a WSS username token is enforced by the Inbound Authentication Message policy for an API.
<wsp:Policy wsu:Id="9dbda2fb-9cef-4ff9-bc70-115c942a3b76"
xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"
xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/
oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsp:ExactlyOne>
<wsp:All>
(L01) <sp:AsymmetricBinding xmlns:sp=
"http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702"
xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy">
<wsp:Policy>
<sp:InitiatorToken>
<wsp:Policy>
<sp:X509Token sp:IncludeToken
"http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702
/IncludeToken/Never">
<wsp:Policy>
<sp:WssX509V3Token10 />
</wsp:Policy>
</sp:X509Token>
</wsp:Policy>
</sp:InitiatorToken>
<sp:RecipientToken>
<wsp:Policy>
<sp:X509Token sp:IncludeToken=
"http://docs.oasis-open.org/ws-sx/ws-securitypolicy
/200702/IncludeToken/Never">
<wsp:Policy>
<sp:WssX509V3Token10 />
</wsp:Policy>
</sp:X509Token>
</wsp:Policy>
</sp:RecipientToken>
<sp:AlgorithmSuite>
<wsp:Policy>
<sp:TripleDesRsa15 />
</wsp:Policy>
</sp:AlgorithmSuite>
<sp:Layout>
<wsp:Policy>
<sp:Strict />
</wsp:Policy>
</sp:Layout>
<sp:ProtectTokens/>
</wsp:Policy>
</sp:AsymmetricBinding>
<sp:SupportingTokens xmlns:sp=
"http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702">
<wsp:Policy>
<sp:UsernameToken sp:IncludeToken=
"http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702/
IncludeToken/AlwaysToRecipient"/>
</wsp:Policy>
</sp:SupportingTokens>
</wsp:All>
</wsp:ExactlyOne>
</wsp:Policy>
You might have a requirement to change the policy assertion that is available by default in API Gateway. For example, you might want to generate the above security policy using a symmetric binding instead of the default asymmetric binding, and modify the username token that is defined by default as a supporting token to a signed supporting token. You could then create custom policy assertions to achieve these specific requirements.
Important:
When adding a custom policy assertion, make sure that both the syntax and the semantics of the assertion are valid and in compliance with the Web Services Security Policy specification.
Symmetric Binding Assertion
You might want to use a symmetric binding (instead of the default asymmetric binding) when only API Gateway possess the X.509v3 token for authentication. You might also want to sign and encrypt the SOAP messages, modify the encryption algorithm, and include timestamp on the SOAP messages. You would then create a custom binding assertion with the specific property lines:
<sp:SymmetricBinding
xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702"
xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy">
<wsp:Policy>
<sp:ProtectionToken>
<wsp:Policy>
<sp:X509Token sp:IncludeToken=
"http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702/
IncludeToken/AlwaysToRecipient">
<wsp:Policy>
<sp:WssX509V3Token10/>
<sp:WssX509PkiPathV1Token10/>
</wsp:Policy>
</sp:X509Token>
</wsp:Policy>
</sp:ProtectionToken>
<sp:AlgorithmSuite>
<wsp:Policy>
<sp:TripleDesRsa15/>
</wsp:Policy>
</sp:AlgorithmSuite>
<sp:Layout>
<wsp:Policy>
<sp:Strict/>
</wsp:Policy>
</sp:Layout>
<sp:IncludeTimestamp/>
<sp:ProtectTokens/>
<sp:OnlySignEntireHeadersAndBody/>
<sp:SignBeforeEncrypting/>
</wsp:Policy>
</sp:SymmetricBinding>
You could create custom assertions to include one or more of the following security requirements:
Supporting Token Assertions
You might want to sign the supporting token for example, WSS username token, and use SignedSupportingTokens assertion. You might also want to specify that the signed username token must always be included in the messages sent to the recipient. You would then create a custom token assertion with the specific property lines:
<sp:SignedSupportingTokens xmlns:sp=
"http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702">
<wsp:Policy>
<sp:UsernameToken sp:IncludeToken=
"http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702/
IncludeToken/AlwaysToRecipient"/>
</wsp:Policy>
</sp:SignedSupportingTokens>
WSS Token Assertions
You might want to include WSS10 and WSS11 assertions to provide additional SOAP message security. You would then create two separate custom token assertions with the specific property lines:
Wss10 assertion:
<sp:Wss10
xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702"
xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy">
<wsp:Policy>
<sp:MustSupportRefIssuerSerial/>
</wsp:Policy>
</sp:Wss10>
Wss11 assertion:
<sp:Wss11
xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702"
xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy">
<wsp:Policy>
<sp:MustSupportRefIssuerSerial/>
<sp:MustSupportRefThumbprint/>
<sp:RequireSignatureConfirmation/>
</wsp:Policy>
</sp:Wss11>
After you have defined these custom assertions in API Gateway, execution of a policy that is configured with all of these custom assertions in the Inbound Auth - Message policy, would construct the custom security policy file as follows:
<wsp:Policy wsu:Id="1e747a18-b55d-4e99-ac67-80a8eafd76b3"
xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"
xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/
oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsp:ExactlyOne>
<wsp:All>
<sp:SymmetricBinding xmlns:sp=
"http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702">
<wsp:Policy>
<sp:ProtectionToken>
<wsp:Policy>
<sp:X509Token sp:IncludeToken=
"http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702/
IncludeToken/AlwaysToRecipient">
<wsp:Policy>
<sp:WssX509PkiPathV1Token10/>
</wsp:Policy>
</sp:X509Token>
</wsp:Policy>
</sp:ProtectionToken>
<sp:AlgorithmSuite>
<wsp:Policy>
<sp:TripleDesRsa15/>
</wsp:Policy>
</sp:AlgorithmSuite>
<sp:Layout>
<wsp:Policy>
<sp:Strict/>
</wsp:Policy>
</sp:Layout>
<sp:OnlySignEntireHeadersAndBody/>
</wsp:Policy>
</sp:SymmetricBinding>
<sp:SignedSupportingTokens xmlns:sp=
"http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702">
<wsp:Policy>
<sp:UsernameToken sp:IncludeToken=
"http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702/
IncludeToken/AlwaysToRecipient"/>
</wsp:Policy>
</sp:SignedSupportingTokens>
<sp:Wss11 xmlns:sp=
"http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702">
<wsp:Policy>
<sp:MustSupportRefIssuerSerial/>
<sp:MustSupportRefThumbprint/>
<sp:RequireSignatureConfirmation/>
</wsp:Policy>
</sp:Wss11>
<sp:Wss10 xmlns:sp=
"http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702">
<wsp:Policy>
<sp:MustSupportRefIssuerSerial/>
</wsp:Policy>
</sp:Wss10>
<sp:EncryptedParts xmlns:sp
"http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702">
<sp:Body/>
</sp:EncryptedParts>
</wsp:All>
</wsp:ExactlyOne>
</wsp:Policy>