COMBODYN2

The COMBODYN control is the dynamic counterpart of the COMBOFIX control. Whereas the selection options inside the COMBOFIX control are defined in a fixed way inside the page definition, the COMBODYN2 control offers the possibility to derive the selection options dynamically from adapter properties.

The following topics are covered below:


Example

graphics/image098.png

The XML layout definition looks as follows:

<rowarea name="ComboDyn">
    <itr>
        <label name="Cost Center" width="120">
        </label>
        <combodyn2 valueprop="costCenter" validvaluesprop="validCostCenters"
                   width="200" size="1">
        </combodyn2>
    </itr>
</rowarea>

The definition of the COMBODYN2 control refers to a valueprop property: this is the property of the adapter class in which the selection is actually passed. In addition, the definition refers to a validvaluesprop property: this is the property from which the options are taken.

The code of the corresponding adapter class looks as follows:

import com.softwareag.cis.server.Adapter;
import com.softwareag.cis.server.util.COMBODYNValidValues;

// This class is a generated one.

public class ComboFixAdapter
    extends Adapter
{
    // property >costCenter<
    String m_costCenter;
    public String getCostCenter() { return m_costCenter; }
    public void setCostCenter(String value) { m_costCenter = value; }

    // property >validCostCenters<
    COMBODYNValidValues m_validCostCenters = new COMBODYNValidValues();
    public COMBODYNValidValues getValidCostCenters() { return m_validCostCenters; }

    /** initialisation - called when creating this instance*/
    public void init()
    {
        m_validCostCenters.addValidValue("0001","Marketing");
        m_validCostCenters.addValidValue("0002","Sales");
        m_validCostCenters.addValidValue("0003","Development");
    }
}

Typical Problems with COMBODYN2

The rendering problems with the internally used HTML control SELECT also apply for the COMBODYN2 control. See the corresponding information in the section Typical Problems with COMBOFIX.

For this reason, COMBODYN2 offers the property renderasfield: when switched to "true", the rendering is not done by using the HTML control SELECT, but by using the normal Application Designer FIELD with valid value support. Rendering as FIELD has the following advantages:

  • There are no overlapping conflicts anymore.

  • Valid values are brought to the client at the point of time when the user requests value help.

But there is also a disadvantage:

  • When selecting a value from the valid value list, the value is displayed with its ID - not with its description.

Properties

Basic
valueprop

Server side property representation of the control.

Obligatory  
validvaluesprop

Adapter property that provides for the valid values that are available as selectable options.

The adapter property must be of type "COMBODYNValidValues".

Obligatory  
width

Width of the control.

There are three possibilities to define the width:

(A) You do not define a width at all. In this case the width of the control will either be a default width or - in case of container controls - it will follow the width that is occupied by its content.

(B) Pixel sizing: just input a number value (e.g. "100").

(C) Percentage sizing: input a percantage value (e.g. "50%"). Pay attention: percentage sizing will only bring up correct results if the parent element of the control properly defines a width this control can reference. If you specify this control to have a width of 50% then the parent element (e.g. an ITR-row) may itself define a width of "100%". If the parent element does not specify a width then the rendering result may not represent what you expect.

Sometimes obligatory

100

120

140

160

180

200

50%

100%

comment

Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view.

Optional  
Appearance
width (already explained above)    
size

Number of rows that are displayed inside the control. If specified as "1" (default) then the control is rendered as combo box - if ">1" then the control is rendered as multi line selection.

Optional  
displayonly

If set to true, the FIELD will not be accessible for input. It is just used as an output field.

Optional  
direction

Presets the default(BiDi) direction of the control. Use black string in order to have the default value.

Optional

rtl

ltr

align

Horizontal alignment of control in its column.

Each control is "packaged" into a column. The column itself is part of a row (e.g. ITR or TR). Sometimes the size of the column is bigger than the size of the control itself. In this case the "align" property specifies the position of the control inside the column. In most cases you do not require the align control to be explicitly defined because the size of the column around the controls exactly is sized in the same way as the contained control.

If you want to directly control the alignment of text: in most text based controls there is an explicit property "textalign" in which you align the control's contained text.

Optional

left

center

right

valign

Vertical alignment of control in its column.

Each control is "packaged" into a column. The column itself is part of a row (e.g. ITR or TR). Sometimtes the size of the column is bigger than the size of the control. In this case the "align" property specify the position of the control inside the column.

Optional

top

middle

bottom

colspan

Column spanning of control.

If you use TR table rows then you may sometimes want to control the number of columns your control occupies. By default it is "1" - but you may want to define the control to span over more than one columns.

The property only makes sense in table rows that are snychronized within one container (i.e. TR, STR table rows). It does not make sense in ITR rows, because these rows are explicitly not synched.

Optional

1

2

3

4

5

50

int-value

rowspan

Row spanning of control.

If you use TR table rows then you may sometimes want to control the number of rows your control occupies. By default it is "1" - but you may want to define the control to span over more than one columns.

The property only makes sense in table rows that are snychronized within one container (i.e. TR, STR table rows). It does not make sense in ITR rows, because these rows are explicitly not synched.

Optional

1

2

3

4

5

50

int-value

renderasfield

If set to "true" then the combo box is rendered like a FIELD control that offers valid value support.

Default is "false".

The normal translation of COMBODYN2 into HTML renders an HTML-select control. This control has certain limitations inside Internet Explorer: it only offers a very reduced set of styles to manipulate its look and feel and - much worse: it always occupies z-index "0" i.e. if you other areas overlapping the COMBODYN2 area then COMBODYN2 is always on the top. This is quite ugly if e.g. a menu is opened and parts of the menu overlap a COMBODYN2 control.

Optional

true

false

allowmultiselection

If set to true then multiple selections are allowed.

Optional

true

false

combostyle

CSS style definition that is directly passed into this control.

With the style you can individually influence the rendering of the control. You can specify any style sheet expressions. Examples are:

border: 1px solid #FF0000

background-color: #808080

You can combine expressions by appending and separating them with a semicolon.

Sometimes it is useful to have a look into the generated HTML code in order to know where direct style definitions are applied. Press right mouse-button in your browser and select the "View source" or "View frame's source" function.

Optional  
invisiblemode

If the visibility of the control is determined dynamically by an adapter property then there are two rendering modes if the visibility is "false":

(1) "invisible": the control is not visible.

(2)"cleared": the control is not visible but it still occupies space.

Optional

invisible

cleared

tabindex

Index that defines the tab order of the control. Controls are selected in increasing index order and in source order to resolve duplicates.

Optional

-1

0

1

2

5

10

32767

datatype

By default, the control is managing its content as string. By explicitly setting a datatype you can define that the control will format the data coming from the server: if the field has datatype "date" and the user inputs "010304" then the input will be translated into "01.03.2004" (or other representation, dependent on date format settings).

Please note: the datatype "float" is named a bit misleading - it represents any decimal format number. The server side representation may be a float value, but also can be a double or a BigDecimal property.

Optional

xs:string

------------------------

N n.n

P n.n

string n

Binding
valueprop (already explained above)    
validvaluesprop (already explained above)    
displayprop

Name of adapter property that controls whether the field is displayonly(true) or not (false).

By using this property you can dynamically control the "display"-status of the control by your adapter object.

Optional  
statusprop

Name of the adapter property that dynamically passes information how the field should be rendered and how it should act.

Optional  
titleprop

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Optional  
flush

Flushing behaviour of the input control.

By default an input into the control is registered within the browser client - and communicated to the server adapter object when a user e.g. presses a button. By using the FLUSH property you can change this behaviour.

Setting FLUSH to "server" means that directly after changing the input a synchronization with the server adapter is triggered. As consequence you directly can react inside your adapter logic onto the change of the corresponding value. - Please be aware of that during the synchronization always all changed properties - also the ones that were changed before - are transferred to the adapter object, not only the one that triggered the synchonization.

Setting FLUSH to "screen" means that the changed value is populated inside the page. You use this option if you have redundant usage of the same property inside one page and if you want to pass one changed value to all its representaion directly after changing the value.

Optional

screen

server

flushmethod

When the data synchronization of the control is set to FLUSH="server" then you can specify an explicit method to be called when the user updates the content of the control. By doing so you can distinguish on the server side from which control the flush of data was triggered.

Optional  
Online Help
helpid

Help id that is passed to the online help management in case the user presses F1 on the control.

Optional  
titleprop (already explained above)    
Miscellaneous
testtoolid

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Optional