Advanced

Palette Colors	Allows you to pick multiple colors to use as fill colors for plots (columns, bars, wedges, lines, areas and other graphic shapes) in some charts. To add a color: 1. Click the color swatch. 2. Find a color in the window that opens and close the window when you have the right color. 3. Click Add Color. This adds a swatch to the list along with the hexadecimal value for this color. Colors get added in order and correspond to specific series of data. For pie or doughnut charts, the list of colors simply repeats through the wedges. Click a color in the list to delete it.
Palette	Pre-defined color palettes for chart backgrounds and labels.
Color Range Palette	For dial gauges, determines the list of colors used for each range within the dial.
Animation	Determines whether the chart rendering is animated (true by default) or not. Nonanimated rendering may pause until the entire chart can be displayed.
Smart Line Color	For pie and doughnut charts, the color of lines connecting labels to a wedge.
Smart Line Thickness	For pie and doughnut charts, the thickness in pixels of lines connecting labels to a wedge.
Smart Line Transparency	For pie and doughnut charts, the opacity, from 0-100, as a percentage of lines connecting labels to a wedge. Zero is fully transparent and 100 is fully opaque. If not set, this is fully opaque.
Smart Line Slanted	For pie and doughnut charts, determines how the lines connecting labels to wedges are bent. Slanted is the default which allows different angles. Slanted uses 90 degree bends only.
Round Radius	Sets the radius to use for rounded corners.
Is Sliced	Determines whether funnel slices are sliced-out or not (default).
Is Hollow	Determines whether funnel slices are hollow or filled (default).
Stream Lined Data	Whether to present the data as streamlined data or as section data. Section by default.
Use Same Slant Angle	Assigns identical slant angles to all slices.
Show Plot Border	Whether to show a border around two-dimensional funnel charts.
Plot Border Thickness	Border thickness in pixels for two-dimensional funnel charts.
High Color	The color to use for the high value column in Sparkline Column charts.
Low Color	The color to use for the low value column in Sparkline Column charts.
Win Color	The color to use for win columns in Win/Loss Sparkline charts.
Loss Color	The color to use for loss columns in Win/Loss Sparkline charts.
Radar Radius	Sets a best-fit radius for radar chart plots. If this is not set, the best fit is automatically calculated.
Draw Anchors	Show anchors for data points in a radar chart plot.
Anchor Sides	Sets the number of sides, from 3 up to 20, to use in anchors.
Anchor Radius	Sets the radius, in pixels, for anchors.
Anchor Border Color	The color to use in the border of anchors.
Anchor Border Thickness	The thickness, in pixels, of anchor borders.
Anchor Background Color	The background (or fill) color or anchors.
Anchor Transparency	How opaque anchors are as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Anchor Background Transparency	How opaque anchor backgrounds are as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Interactive Legend	Whether users can click in the legend to visually hide specific series. This is true by default.
Minimize Wrapping in Legend	Whether to minimize text wrapping in the legend. This is true by default.
Legend Column Numbers	Sets the number of columns to show with labels in the legend.
Data Line Color	The color to use in plot lines for data.
Data Line Thickness	The thickness, in pixels, of plot lines for data.
Data Line Transparency	How opaque plot lines for data are as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Data Line Dashed	Whether plot lines for data should be dashed. Defaults to false.
Data Line Dash Length	The length, in pixels of dashes in a plot line when dashing is enabled.
Data Line Dash Gap	The distance, in pixels, between dashes in a plot line when dashing is enabled.
Show Radar Border	Whether to show the outer border in radar charts.
Radar Border Color	The color to use for the outer border in radar charts.
Radar Border Thickness	The thickness, in pixels, for the outer border in radar charts.
Radar Border Transparency	How opaque the outer border for a radar chart should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Radar Fill Color	The fill color for radar plots.
Radar Fill Transparency	How opaque the fill for radar plots should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Radar Spike Color	The color to use for vertices (lines that radiate from the center) in radar plots.
Radar Spike Thickness	The thickness, in pixels, of vertices (lines that radiate from the center) in radar plots.
Radar Spike Transparency	How opaque vertices (lines that radiate from the center) in radar plots should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Reversal Value	The specific value that determines when a horizontal shift should occur to plot the next point.
Reversal Percentage	The percentage of change that determines when a horizontal shift should occur to plot the next point.
Maximum Horizontal Shift Percent	Sets the maximum horizontal shift as a percentage.
Rally Color	The color to use for plot lines that indicate a rally.
Rally Thickness	The thickness, in pixels, for rally lines in the chart.
Rally Transparency	How opaque rally lines should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Rally Dashed	Whether rally lines should be dashed.
Rally Dash Length	The length, in pixels, for rally line dashes when dashing is enabled.
Rally Dash Gap	The distance, in pixels, between dashes in rally lines when dashing is enabled.
Decline Color	The color to use for plot lines that indicate a decline.
Decline Thickness	The thickness, in pixels, for decline lines in the chart.
Decline Transparency	How opaque decline lines should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Decline Dashed	Whether decline lines should be dashed.
Decline Dash Length	The length, in pixels, for decline line dashes when dashing is enabled.
Decline Dash Gap	The distance, in pixels, between dashes in decline lines when dashing is enabled.
Plot Price As	What type of plot to use for the price chart: Default Candlestick Line Bar
Plot Closing Price	Whether the closing price is included in the price chart.
Show Volume Chart	Whether to show the volume chart.
Volume Height Percent	The percentage of the overall chart, from 20% to 80%, that the volume chart should occupy. See also Plot Space Percent.
Plot Space Percent	The percentage of the overall chart that the price chart should occupy. See also Volume Height Percent.
Bear Fill Color	The fill color for candles or bars with a bear trend.
Bear Border Color	The border color for candles, wicks (lines) or bars with a bear trend.
Bull Fill Color	The fill color for candles or bars with a bull trend.
Bull Border Color	The border color for candles, wicks (lines) or bars with a bull trend.
Rollover Band Color	The color of the rollover band.
Rollover Band Transparency	How opaque the rollover band should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Show Volume Chart Plot Borders	Whether to show plot borders in the Volume chart.
Volume Chart Plot Border Color	The border color to use for plots in the Volume chart.
Volume Chart Plot Border Thickness	The border thickness, in pixels, for plots in the Volume chart.
Volume Chart Plot Border Transparency	How opaque the plot borders in the Volume chart should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Plot Line Transparency	How opaque the plot lines should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Plot Line Thickness	The thickness, in pixels, for plot lines.
Plot Line Dash Length	The length, in pixels, for dashes in plot lines.
Plot Line Dash Gap	The distance, in pixels, between dashes in plot lines.
Maximum Column Width	Sets the maximum width for columns.
Use 3D Lighting	Turns on advanced gradients and shadows in 3D charts.
Primary Y Axis Name Width	Sets a maximum width for the primary Y axis label.
Secondary Y Axis Name Width	Sets a maximum width for the secondary Y axis label.
Place Values Inside	Whether data values are placed inside columns.
Show Secondary Limits	Whether to show limits for the secondary Y axis.
Show Divisional Line Secondary Value	Whether to show the secondary axis value for divisional lines in the canvas.
Show Cumulative Line	Whether to plot lines as cumulative values for the series.
Show Line Values	Whether to display data point values on lines.
Plot Border Color	The color to use for borders for plots in the chart.
Plot Border Transparency	How opaque the plot borders should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Plot Border Dashed	Whether plot borders should be dashed.
Plot Border Dash Length	The length of dashes, in pixels, for the plot border when dashing is enabled.
Plot Border Dash Gap	The distance, in pixels, between dashes in plot borders when dashing is enabled.
Plot Fill Angle	Sets the angle (0 to 360) for plot fills that use gradients.
Plot Fill Transparency	How opaque the plot fill should be as a percentage (0-100%). Zero is fully transparent and 100 is fully opaque.
Plot Gradient Color	A global color to use in gradient fills for plots in the chart.
Plot Fill Ratio	Sets the fill ratio for gradients in plots for the chart.
Use Round Edges	Sets rounded corners for columns and fills columns with a glass effect gradient.
Show Sum	Show the sum of all segments in a stacked column layout.
Use Percent Distribution	Show data values as percentages.
Show X Axis Percent Values	Show values as percentages along the X axis.
Overlap Columns	Overlap columns in 3D layouts for a richer look.
Gantt Pane Duration Unit	The time unit that is used in a Gantt chart timeline. This defaults to Month.
Gantt Pane Duration	The number of time units to include in a Gantt chart timeline.
Slack Fill Color	If you include percentage of completion statistics for a Gantt chart, this is the color used to fill the bars for the uncompleted portions of tasks.
Show Slack as Fill	Determines whether uncompleted portions of tasks are shown with fill color or not. This defaults to true. This is only applicable if you include percentage of completion statistics for the Gantt chart.
Show Percent Label	Determines whether a label with the percentage of completion is shown for tasks in a Gantt chart. Defaults to No. This is only applicable if you include percentage of completion statistics for the Gantt chart.
Show Task Start Date	Determines whether a label with the start date is shown for tasks in a Gantt chart. Defaults to No.
Show Task End Date	Determines whether a label with the end date is shown for tasks in a Gantt chart. Defaults to No.