| XCO0009I X-COM node is initialized.
|
X-COM has initialized the target and is ready for work. |
No action required. |
| XCO0010W Wrong ECB found.
|
The type of returned event indicator is not valid and will be
ignored. X-COM nucleus continues to wait for requests.
|
Please contact Software GmbH. |
| XCO0011E X-COM data error.
|
The routine to check X-COM data has detected an inconsistency.
X-COM nucleus terminates abnormally.
|
Please contact Software GmbH. |
| XCO0012E USER RET (R15) error.
|
One of the routines called by X-COM nucleus has returned an
error. X-COM nucleus terminates abnormally.
|
Please contact Software GmbH. |
| XCO0013E Delete ECB error.
|
An ECB cannot be removed from the wait list. X-COM nucleus
terminates abnormally.
|
Please contact Software GmbH. |
| XCO0014E No ANSWER entry point.
|
The entry point for the reply handler could not be found. X-COM
nucleus cannot process any user replies and terminates abnormally.
|
Please contact Software GmbH. |
| XCO0015E APPL ECB already deleted.
|
The X-COM nucleus was posted to send the reply to the user but
could find the related X-COM data. X-COM nucleus ignores the post and continues
to wait for requests.
|
No action required. |
| XCO0016I Operator command: :1:.
|
Message confirming operator input. |
No action required. |
| XCO0019E X-COM parm list wrong.
|
The request or reply handler has returned inconsistent data.
X-COM nucleus terminates abnormally.
|
Please contact Software GmbH. |
| XCO0020I X-COM stopped
|
X-COM nucleus is calling the termination handler for shutdown
|
No action required |
| XCO0021W This X-COM is no longer active
|
X-COM nucleus has successfully executed the termination handler
|
No action required |
| XCO0022I X-COM cancel will proceed
|
The operator command XCANCEL to cancel Entire System Server was
entered
|
No action required |
| XCO0023I X-COM halted
|
The operator command XHALT was entered. This means that no more
calls are possible,
but the Entire System Server task is still available and can be
restarted with the XSTART command
|
No action required |
| XCO0024I X-COM started
|
The operator command XSTART was entered. This means that calls
are now processed again
|
No action required |
| XCO0025I X-COM end will proceed
|
The operator command XEND to end Entire System Server was
entered
|
No action required |
| XCO0026E APPL stop error
|
The shutdown handler has returned an error |
Please contact Software GmbH |
| XCO0027E Timer error
|
Setup of timer services has failed.
X-COM nucleus terminates abnormally
|
Please contact Software GmbH |
| XCO0028I Number of active users = :1:
|
Output of command XUSER reporting the current number of user
requests
|
No action required |
| XCO0029I Highest number of active users = :1:
|
Output of command XUSER reporting the highest number of user
requests
|
No action required |
| XCO0030I Number of active CQE-S = :1:.
|
Output of command XCQES reporting the current number of user
requests.
|
No action required. |
| XCO0031I Highest number of active CQE-S = :1:.
|
Output of command XCQES reporting the highest number of user
requests.
|
No action required. |
| XCO0032I Parameters for this session:.
|
Output of command XPARM. |
No action required. |
| XCO0033I SVC number = :1:.
|
Output of command XPARM reporting the used SVC number on z/OS. |
No action required. |
| XCO0034I Node number = :1:.
|
Output of command XPARM reporting the ESY node number. |
No action required. |
| XCO0035I CQE number = :1:.
|
Output of command XPARM reporting the startup parameter NCQE.
|
No action required. |
| XCO0036I NAB number = :1:.
|
Output of command XPARM reporting the startup parameter NABS.
|
No action required. |
| XCO0037I User-application = :1:.
|
Output of command XPARM reporting the name of MAIN function.
|
No action required. |
| XCO0039I Total number of commands = :1:.
|
Output of command XSTAT reporting the accumulated number of
received user requests.
|
No action required. |
| XCO0041E Invalid operator command.
|
An invalid operator command was entered. |
Correct it. |
| XCO0043E Error during request of memory.
|
Not enough memory available. X-COM nucleus terminates
abnormally.
|
Please check your environment for available memory. |
| XCO0044E Error during release of memory.
|
Error in FREEMAIN/FREEVIS/RELM. |
Please contact Software GmbH. |
| XCO0045E OPER command init error.
|
Adabas operator command interface could not be established.
X-COM nucleus terminates abnormally.
|
Please contact Software GmbH. |
| XCO0046E Add CQHAECB error.
|
Adabas could not add the command queue to the ECB wait list.
X-COM nucleus terminates abnormally.
|
Please contact Software GmbH. |
| XCO0047E Add user ECB error.
|
Adabas could not add the user ECB to the ECB wait list. X-COM
nucleus terminates abnormally.
|
Please contact Software GmbH. |
| XCO0048E WAIT error.
|
The central wait routine has returned an unrecoverable error.
X-COM nucleus terminates abnormally.
|
Please contact Software GmbH. |
| XCO0050E MPM20-error.
|
The Terminate-Target call was unsuccessful. Shutdown will
continue.
|
Please contact Software GmbH. |
| XCO0051W MPM08-error, user gone.
|
The Get-User-Buffer call was unsuccessful. The user is probably
not active any longer. Entire System Server purged this request from the queue.
|
No action required. |
| XCO0052W MPM12-error, user gone.
|
The Post-User call was unsuccessful. The user is probably not
active anymore. Entire System Server has purged this reply from the queue.
|
No action required. |
| XCO0053W MPM36-OK, user gone.
|
The timeout call (TIME elapsed) for a user was successful. The
user is probably not active anymore. Entire System Server has purged this reply
from the queue.
|
No action required. |
| XCO0054W MPM36-error, user not gone.
|
The timeout call (TIME elapsed) for a user was unsuccessful.
Entire System Server has tried to purge the user, but the user fetched data
back at the last moment.
|
No action required. |
| XCO0055I Node currently :1:.
|
Output of command XSTAT. Possible value for :1: are ACTIVE
(normal state) or HALTED (node is halted due to operator command XHALT).
|
No action required. |
| XCO0062W Request for active user found, delete old
user.
|
There is already an active request for the user requesting a new
call. The old session is queued for logoff and the new request has been
assigned to a new session. The X-COM nucleus has removed the old resources used
on the transport level.
|
No action required. |
| XCO0077I Attached buffers above 16M line.
|
Adabas Attached Buffers are allocated above the 16 MBytes line.
|
No action required. |
| XCO0078E No space for new user X-COM block.
|
The number of free user X-COM blocks has been exceeded. This
number depends on the NCQE parameter. Usually a command queue overflow will
occur if the number of parallel user requests is exceeded. X-COM nucleus
terminates abnormally due to data inconsistencies.
|
Please contact Software GmbH. |
| XCO0080E MPM24-error, environment not
established.
|
The Establish-Adabas-Environment call has failed. The Entire
System Server terminates abnormally.
|
Please contact Software GmbH. |
| XCO0081E MPM00-error, target not initialized.
|
The Initialize-Adabas-Target call has failed. The Entire System
Server terminates abnormally.
|
Please contact Software GmbH. |
| XCO0082I :1:.
|
TRACE data output. |
No action required. |
| XCO0083W Duplicate WAIT ECB. User cleaned up.
|
After successful return from request handler: The user was
already waiting. The new request is accepted and the old command queue entry is
purged. The old ECB is reused for the new request.
|
No action required. |
| XCO0084W Multiple active requests. Delete old.
|
After successful return from reply handler: The command queue element of the user is
not unique. Another element has been found with the same cross memory post
information. The old request has been purged and the reply for the new request has
been initiated. This occurs only if a task has been cancelled and immediately
restarted and if the same ASCB has been reused.
|
No action required. |
| XCO0085W Reply handling cancelled. Illegal ECB.
|
After successful return from reply handler: the reply cannot be delivered. The
command queue element of the user is not unique. Another element has been found with
the same cross-memory post information . The reply currently processed is obsolete
and has been purged. This occurs only if a task has been cancelled and immediately
restarted and if the same ASCB has been reused.
|
No action required. |
| XCO0086I APPL ECB: :1:.
|
This message informs about the address of an Event Control
Block. It will be issued only in conjunction with other messages.
|
No action required. |
| XCO0087E Wrong :1: value.
|
:1: value is specified incorrectly in startup parameter file.
|
Correct the value. |
| XCO0091E
Module :1: cannot be found.
|
Load module :1: was not found in any of the libraries in the
STEPLIB chain.
|
Check all Entire System Server (NPR) libraries provided by
Software AG.
|
| XCO0092E
Load for module :1: failed.
|
It was not possible to load module :1: into storage. |
Check the size of the address space. |
| XCO0093E
nnnnn Installation error, NPRLIC not
executable.
|
Installation of license check failed. The NPRLIC module is part
of the installation delivery of the product. The error message indicates that
load-module NPRLIC was overwritten by mistake. The license file must be
referenced with a DD statement, e.g. //LICENSE DD
DISP=SHR,DSN=PPEX.DAEF.NPR.LICENSE It is not possible to convert the
license to a load module as it is allowed in ADABAS.
|
Reload the module NPRLIC from original NPR loadlib
(NPRvrs.LOAD).
|
