Entire Operations 5.5 SP2 Fix 0011 readme Apr 2024 _________________________________________________________________ Contents: 1.0 Fix Name 2.0 Fix ID 3.0 Product(s)/Component(s) Affected 4.0 Requirements 5.0 Platform Support 6.0 Cautions and Warnings 7.0 Fix Contents 8.0 Installation 9.0 Uninstallation 10.0 Globalization 11.0 Copyright 12.0 Contacting Us 1.0 Fix Name Entire Operations 5.5 SP2 Fix 0011 2.0 Fix ID NOP_5.5_SP2_Fix11 3.0 Product(s)/Component(s) Affected This fix affects product Entire Operations. 4.0 Requirements For language pack requirements, see the Globalization section of the Software AG Empower Product Support website at https://empower.softwareag.com/Products/Globalization/default.asp 5.0 Platform Support Same platforms as product release. 6.0 Cautions and Warnings None. 7.0 Fix Contents Changes made for cumulative Fix NOP552I011 ------------------------------------------------------------------------ NOPALL-4084 MACRO TEST: Email for missing Symbol: Context Information missing MACRO TEST: E-mail (e.g. global message) for missing symbol:The creation of the context information is corrected.The context line in the e-mail now looks like:Owner :1: - Network :2: - Job :3: NOPALL-4069 Dummy job is executed although execution node is not available Dummy and temporary dummy jobs are allowed to be executed, even if the execution node is not active.Corrected a node testing issue related to this. NOPALL-4070 Email Sending - Loop, if wildcard in attachment 1. Avoid monitor loop, if an e-mail attachment name contains '*' (asterisk).2. Wildcard handling for attachments is explicitly not supported.3. Unix (Linux) only:Attachment file names containing '*' (asterisk) are allowed. NOPALL-4062 CUI: Stuck in NOP Active Scheduling Parameters Screen CUI: Corrected the job active scheduling parameters definition. NOPALL-4089 Multiple symbol values are cut to 54 characters by symbol function MV (multiple value) Corrected the passing of the returned symbol value for the symbol function MV.The maximum symbol value length (120 bytes) is returned again.This is a post-correction for NOPALL-3993. NOPALL-4082 Follow-up for NOPALL-4026 - No Event, when 'File in Use' message is issued for SYSOUT copy to BS2000 1. Global messages and / or Event Store messages will be written for the described error, if the following setting is enabled:Global Messages for Events Message Event Sending Store...Job not ok, or execution error Y Y2. The global message for the described case was made more readable.See attached hardcopy. NOPALL-4088 OGC 5.5.2.10 - Saving large JCL with Location NAT causes error EOR4000 - Editor error: STAT 504 Session does not exist NOPALL-4090 CUI: EOR4000 - Editor-Fehler: ADD - Cannot allocate BP block - New message, if the buffer pool is full during Unix (Linux) and Windows SYSOUT Browsing preparation: EOR4102 - SYSOUT too large - Editor Buffer Pool full- Always write to Unix (Linux) and Windows SYSOUT: EOR0338 - SYSOUT Size is :1: BytesNumber ...... EOR5524102English EOR4102 - SYSOUT too large - Editor Buffer Pool fullGerman EOR4102 - SYSOUT zu gross - Editor Buffer Pool vollTx. EOR4102 - SYSOUT too large - Editor Buffer Pool full .Ex. The SYSOUT doesn't fit into the Editor Buffer Pool. Notes: - For NOP on Unix (Linux): Consider the Natural parameter EDTBPSIZE and it's maximum value. - You may define a 'SYSOUT Line Limit' for SYSOUT Browsing. .Ac. Consider to open the SYSOUT in OGC. You may also try to browse the SYSOUT it's original locationTx. EOR4102 - SYSOUT zu gross - Editor Buffer Pool voll .Ex. Der SYSOUT passt nicht in den Editor Buffer Pool. Anmerkungen: - Fuer NOP auf Unix (Linux): Pruefen sie ggf. den Natural-Parameter EDTBPSIZE und seinen maximalem Wert. - Sie koennen ein 'Limit fuer SYSOUT-Zeilen' definieren. .Ac. Versuchen sie ggf. den SYSOUT in OGC zu oeffnen. Versuchen Sie ggf. den SYSOUT an seinem originalen Speicherplatz direkt zu lesen. NOPALL-4095 NOP 552 CF10: CUI: JCL location change on ActiveQueue doesn't work any more (Side effect of NOPALL-4005. Due to multiple GET statement. The last state was lost. It is fixed now.)1. Post-correction for NOPALL-4005 Avoid multiple GET statement.2. CUI, Job Master and Job Active: Don't show member selection, if member field empty. Instead, show message EOR0043: EOR0043 - Member Name missing NOPALL-4096 Error in NOP: PQC-SY-N 1455 - JV def. record missing 1. Avoid superfluous database updates during prerequisite checking for input conditions depending on symbol value. This is a post-correction for NOPALL-4051.2. Input conditions depending on symbol value: Corrections to the symbol replacement in the symbol name and symbol value definitions. NOPALL-4117 Monitor Error NAT3145 in JARSPWFN Line 1630 Applied some additional END TRANSACTION statements.This shall reduce the likelihood of NAT3145 errors.Please note that the issue could not be reproduced in the NOP development environment. NOPALL-4074 Monitor Error NAT3009 in JA-SCS-P Line 2410 NOPALL-4093 NOP 5.5.2.CF10 - Follow up of SI-492225 and NOPALL-3894 - Input condition reference WCW-1 does not work over turn of the year - RN-TI--N (Run numbers in time interval) For more robustness, the 'COND-TIME' FIND loop was exchanged by a READ loop.- If an input condition is not found, and if it's reference is not RUN, additional information about the active condition search will be logged.Example:WCW-A - any - WCW-10 not found... Reference WCW-10 from 02.01.24 00:00 to 02.01.24 23:59 NOPALL-4097 Truncation of File Name with DAT Job View EOR-JOB-ACTIVE:A-FTP-REMOTE-HOST is a redefinition of A-DAT-TARGET-FILE, using the same Adabas field.Enlarged it's size from A50 to A54, like A-DAT-TARGET-FILE.This shall avoid the unwanted cutting of A-DAT-TARGET-FILE to 50 bytes. NOPALL-4094 OGC 552 CF10 - JCL Load Mode 'S': Changes to the active JCL of a job are not taken into account when the job is repeated The text for the third re-submission option was incorrect and misleading.This is corrected.See attached hardcopies and doc input in NOPALL-4107. NOPALL-4106 NOP543/13 CL-SYA-P 2120 NAT3113 Specified ISN invalid. DB/FNR/Subcode 216/36/0 CL-SYA-P:Corrected the deletion of active symbols. The deletion is separated from the READ loop now.Tx. EOR2873 - Cleanup by Monitor locked since :1: .Ex. The Cleanup is locked, to prevent other parallel cleanups to be processed. .Ac. If the cleanup lock is not released automatically, you may consider to release it with the utility CLLOCK-T. NOPALL-4114 OGC 5.5.2 CF10: Last 20 lines duplicated during SAVE with JCL Location MAC NOPALL-4098 Follow up of NOPALL-4081 and SI-548810 for 5.5.2 CF10- Usage of NOP API NOPUNX1N - LOGOUT during READ-FILE Loop 1. Corrected and enhanced the setting of NPROS session-related parameters, mainly for the API NOPUNX1N.This is required for the enhanced session handling, which comes with NPROS-409 (NPROS 2.1.17 CF2).2. At some locations additional error handling for the new NPROS error codes (with NPROS-409):#define NPR_SESSION_REQUIRED 50 /* session required 21H 02 ff. NP409 */ /* The function requires a session number, but none is given. NP409 */#define NPR_SESSION_NOT_FOUND 51 /* session not found 21H 02 ff. NP409 */ /* The session was not found in the internal session table NP409 */3. Additional correction for NOP CUI SYSOUT browsing for NPROS Windows. Using identifier N4098.1 .4. API NOPUNX1N return texts are missing sometimes. Using identifier N4098.2 . NOPALL-4120 MAC-GE-P does not catalog MACROs for job type DAT MACRO bulk generation (MAC-GE-P):Corrected the filter for suitable job master objects:- The JCL location must be 'MAC'.- JCL file and JCL member must not be empty.- JOB types DUM (dummy) and NET (subnetwork) will be skipped. NOPALL-4079 OGC: MACRO JCL Command TEST - NAT0610 This statement is not permitted in reporting mode NOPALL-4038 New 'effective to' attribute in the Network Schedule Definition NOP CUI:Added 'effective to' attribute in the Network Schedule Definition.Please refer to NOPALL-4039 for the description. NOPALL-4123 CUI: Stuck in NOP Active Scheduling Parameters Screen - follow up to NOPALL-4062 Follow-up fpr NOPALL-4062.Renamed the text for PF4 to 'Quit', to be conform with other such cases.Mentioned PF4 'Quit' in the CUI online help.Prepared documentation input. See NOPALL-4124. NOPALL-4133 Multiple Unix nodes with same node number - No EOJ actions of uninvolved jobs Avoid NAT1316 during Node Logoff for an Unix or Windows node. NOPALL-4128 Export of EOJ string check omits leading blank NOP Export:OBJECT=EOJ-CHECK-MASTERThe attribute EVENT-NAME will be enclosed in double quotes now.Example:EVENT-NAME=" 0 SAETZE"Leading blanks in this attribute will be kept and will be re-imported properly. NOPALL-2873 Direct 'OPEN Natural Member' function in Job Definition dialog Changes made for cumulative Fix NOP552I010 ------------------------------------------------------------------------ NOPALL-4081 Usage of NOP API NOPUNX1N - LOGOUT during READ-FILE loop, when NP NOPALL-4080 Batch catalog of MACROs abends when one member cannot be cataloged NOPALL-4035 z/OS: MACRO JCL loaded incompletely - sporadically NOPALL-4029 Job in passive wait for resource, but resource available NOPALL-4021 NOP 552 CF10 several corrections NOPALL-4037 OGC - Error NAT1316 while attempting to set a condition, within Network Graphics NOPALL-4048 After using wildcard for profile when adding a new user, user won't be added NOPALL-4005 Error NAT3144 in line 5595 of JA-DJ--P NOPALL-3980 NOP 5.5.2.8 + Hotfix 31: NOP on Unix: Error NAT0104 occurs during batch catalog NOPALL-4057 P-REPEAT and P-REPEAT-COUNT symbols faulty NOPALL-4051 Recursive Symbol Resolution in Input Conditions NOPALL-4008 BS2000 LMS Member Name in Job List of Network only 8 Characters NOPALL-4054 NPR Node not active - due to end-of-job check issues for excessive Unix SYSOUT size --> SYSOUT Size Limit NOPALL-4042 OGC/RPC - EXX10030069 opening SYSOUT (for one user only) after NPR upgrade NOPALL-4071 OGC - DAT Job cannot be defined for BS2000 execution nodes (ESA) NOPALL-4073 Error handling using program MAC-GE-P (MACRO Generation) Changes made for cumulative Fix NOP552I009 ------------------------------------------------------------------------ NOPALL-4027 OGC and NOW: Waiting for: Actions for active Input Conditions dep NOPALL-3894 Input condition reference WCW-1 does not work over turn of the year NOPALL-3987 CAPS setting cannot be saved in SAG Editor NOPALL-4010 BS2000: Line wrap undercuts subsystem specific double-slash NOPALL-3979 SYSOUT Browsing: Unix SYSOUT not found, after SYSOUT Copy to BS2000. GUI OK. NOPALL-4006 Finish editing JCL with SAVE will not save last change NOPALL-3998 Follow-up of itrac NOPALL-3966: Blockade Situation with Resources NOPALL-3981 Cyclic job: JCL load behavior, load mode 'S' NOPALL-4020 SYSOUT Browsing Issues with UTF-8 characters NOPALL-4026 No Event, when 'File in Use' message is issued for SYSOUT copy to BS2000 NOPALL-4028 NAT-Error in symbol function in input condition check causes emergency Monitor shutdown[or abend NOPALL-3991 When calling a subnet with more than 5 levels, the subnet is not 'terminated' NOPALL-3971 Logon Prompt to Linux Node with unresolved Symbol in User ID NOPALL-3978 OGC: Deleting an active input condition: EOR0070 - No Objects found for Selection Criteria NOPALL-3977 Import/Export several runtime errors NOPALL-3972 Batch Cataloging of MACROs on Unix - MAC-GE-P - EOR4000 - Editor Error: UPDM 504 Session does not exist NOPALL-3982 End-of-job action - Set symbol - Length > 80 NOPALL-3984 NOP on Linux: SAG Editor of active JCL duplicates or triples last line after editing NOPALL-3976 MACRO JCL Loading: Logon to Execution Node (an ESA node): NPR5510 NOPALL-3993 Error in Symbol Function TIMN NOPALL-3983 Export Network Defintion HIST-DAY= is displayed with 1 day delay (Tag Versatz) gespeichert NOPALL-4000 NPROS node disappears from system without error messages - NOP Part NOPALL-3994 Usage of Symbol Function ?W with Recursive Symbol Resolution NOPALL-3986 NAT Member as EOJ Exit - Library SYSEORU has precedence before user-defined library NOPALL-4007 Import function refuses EOJ-Action with Symbol length > 20 NOPALL-4001 NOP 5.5.2.8 + Fix31-35: Logon error leaked into other job NOPALL-3989 File existence check with symbols, that are created during the network run NOPALL-4025 No short Text with EOJ Action 'Symbol Setting', if Symbol missing Changes made for cumulative Fix NOP552I008 ------------------------------------------------------------------------ NOPALL-3947 User in OGC has Access to Active Jobs w/o Access Rights in NOP (N NOPALL-3949 BS2000 Job Variable Checking via ESA: Monitor Task Usage is too high NOPALL-3955 File Existence Check with wildcard: Error message instead of defined action NOPALL-3875 OGC - NAT0104 error during TEST or MACRO function of a MACRO NOPALL-3961 Recursive Symbol Resolution in Input Conditions NOPALL-3963 File Existence Check with long Pathname ignored NOPALL-3959 Multiple symbol values are cut to 54 characters by symbol function MV (multiple value) NOPALL-3917 BS2000 via ESA: EOJ Checking, Input Condition depending on Job Variable: Handling of 'Node not active' NOPALL-3953 Import - Status 'aborted' import despite success NOPALL-3860 Error with Monitor Defaults / Monitor UserId NOPALL-3967 Node level user id is not honored as Submit User ID in the search hierarchy NOPALL-3965 Node as a Symbol - Evaluation Error NOPALL-3905 Remove OPO from NOP - CUI and Monitor NOPALL-3966 Blockade Situation with Resources NOPALL-3936 Input Condition Type DUM with Symbol Value not honored NOPALL-3858 EOR2030 Monitor-Fehler NAT0082 in . Zeile 0 NOPALL-3923 NAT1305 in RN-TI--N line 2995 NOPALL-3930 OPJACJ-N: Typo Correction NOPALL-3929 Error NAT1305 in IENMX1-N line 1340 NOPALL-3932 Error NAT0938 in DI-DF--N line 380 with HotFix OP55218 / NOPALL-3820 Changes made for cumulative Fix NOP552I007 ------------------------------------------------------------------------ NOPALL-3892 Email notification: Error message not displayed correctly NOPALL-3895 Condition with reference DUM - subsequent condition depending on BS2000 file is not evaluated - postrequisite for NOPALL-3882 NOPALL-3868 NOP on Unix: SAG Editor randomly displays wrong characters in BS2000 SYSOUT NOPALL-3893 EOJ check, string check in file, job start escape character in fields 'String' and 'in File' NOPALL-3897 No "Ended not OK" if SYSOUT limit reached and default setting 'Interrupt End-of-Job Checking on BS2000' = B NOPALL-3886 "?*TIMN" built-in symbol: leading zeroes missing before 10:00 NOPALL-3865 Number of Active Jobs > 100 NOPALL-3850 API NOPUNX1N - Add F-LINE-LIMIT in parameter area NOPUNX1A NOPALL-3913 Symbol Resolution in File Existence Checks not at Activation Time NOPALL-3914 Input Condition: File Existence Check Fails because of Error: Condition fulfilled NOPALL-3827 Unix script frame - Don't use realpath command, where it is not available NOPALL-3829 OGC Server - Report 'Activation Overview' Message data is not language dependent NOPALL-3826 Report RE-ACO-P - Usage improvements due to performance issues NOPALL-3828 Two entries are generated per activation - one with Type: API and one with Type: Planned - NOP 543 CF21 NOPALL-3832 Additional network execution day displayed at the turn of the year NOPALL-3857 OGC/ESA - ESY5799 at BS2000 LMS Member Selection NOPALL-3835 NOP on Unix: API NOPUMT3N does not find SYSERR messages for library SYSEOR - ESY5999 TCP:socket:24:Too many open files NOPALL-3842 OGC Server ? NAT1316 if too many filters exist for one user NOPALL-3848 CUI: User Definition and Profile / Selection Criteria: Enable modification for General Users NOPALL-3855 NAT1316 in OPJAOP-N Line 4946 NOPALL-3839 Symbol Function D: Error Handling for missing Calendar NOPALL-3854 Node Default User IDs - Differences between NOP and OGC NOPALL-3861 NAT1305 in ICDJV--N Line 3440 NOPALL-3820 Linux: Job result not-ok although it ran with return code 0, if 'command not found' detected in SYSOUT NOPALL-3870 Transfer to NOM even if EOJ action has been removed in active Job NOPALL-3869 Job type DAT: When transferring files with NPR, characters are swallowed NOPALL-3878 API NOPURE2N doesn't block Resource across Network NOPALL-3884 Input condition reference DUM - File existence check without rights: job is started NOPALL-3890 Faulty re-activation, if latest start time exceeded NOPALL-3880 Error in EOJ Definition and Execution, if Symbol Value is longer than 80 Characters NOPALL-3862 Inheritance of Parameter Values from Network to JOB: BS2000 Account Number NOPALL-3885 OGC: Job type DAT: Changing the target file in the active run not possible NOPALL-3891 OGC/ESA - ESY5799 at BS2000 LMS Member Selection - NOP RPC Server Correction Changes made for cumulative fix NOP552I006 ------------------------------------------ NOPALL-3761 OGC: EOR0240 at JCL location modification from TXT to NAT NOPALL-3773 OGC-Server: Incomplete error message text for NAT0104 NOPALL-3779 NOP543 CF20: RE-ACO-P causing performance issue - more logging for a NOPALL-3785 Usage of symbol functions ?D and ?W NOPALL-3788 BS2000: SYSOUT Selection only shows last Repetition (Current JobId) NOPALL-3790 NOP 552 CF6 several corrections NOPALL-3801 Export: EXECUTION-NODE Node Number vs. Short Name NOPALL-3803 EOR2030 - Monitor Error NAT3009 in PWT----P Line 3430 NOPALL-3804 Set NOP Job to DUM using symbols in input condition doesn't work in NOPALL-3809 Job definition: Symbol replacement in SYSOUT user ID NOPALL-3821 OGC - after JCL regeneration and release from hold: job starts witho Changes made for cumulative fix NOP552I005 ------------------------------------------ NOPALL-3427 Validate expiration date in license key at session start NOPALL-3766 SYSEOR7065 and SYSEOR7254 are not included in NOP552 CF3 NOPALL-3767 Log status 7528: Symbol not found - Follow-up for NOPALL-3754 and N NOPALL-3768 Error paging on ActiveQueue - PF7 and PF8 NOPALL-3770 JA-SCS-P Line 1940 Error NAT3009 NOPALL-3772 API NOPUCS1N Function=2, Object Type=S -> RC 103 NOPALL-3786 NAT0966 in RSM-US-N Line 9750 NOPALL-3789 Doc: Input condition reference AAC, Corrections + reference YYYYMMDD Changes made for cumulative fix NOP552I004 ------------------------------------------ NOPALL-3713 Provide exact number of runs on CUI Active Queue NOPALL-3718 E-Mail notification about network waiting for symbol prompting - Pos NOPALL-3721 Monitor Error NAT3041 in NOPSYMVN Line 1370 NOPALL-3725 z/OS: No node logon possible to "technical" RACF userid without pass NOPALL-3728 Unexpected error message 'ICDMS--N 5160 - #EOR-ERC: 70' by using Inp NOPALL-3732 CUI: z/OS RACF Security Error Handling for JCL Definition NOPALL-3734 EOR Import fails with error NAT1319 NOPALL-3738 NOP 5.5.2.3 export file cannot be imported to same version NOPALL-3739 A network activated in the OGC does not appear in the Activation Sum NOPALL-3740 NOP 543 CF19: Missing objects during Export with IE-EXA-P NOPALL-3742 NOP EOJ Action "T" ends with NPR FILE/COPY Error NOPALL-3745 OGC: Using nodes in cross-references NOPALL-3747 Powershell exit code not carried through NOPALL-3749 Monitor should not be started from MENUEOR in Batch Mode NOPALL-3754 Input Condition depending on Symbol: If symbol missing, always wait NOPALL-3755 New julian date formats in symbol function 'D' Changes made for cumulative fix NOP552I003 ------------------------------------------ NOPALL-3161 API NOPUAC5N - add latest start time (in hours) parameter NOPALL-3656 NOPUNX1N Password only A16; no enciphered password possible NOPALL-3658 Server functionality to serve GoJS coordinates NOPALL-3659 BS2000 Submit: Long lines will be cut at column 80 NOPALL-3667 EOR5509 - Logon fehlerhaft, Kn. 1070 User ID SB - in job execution t NOPALL-3670 CUI Calendar list: Wrong behaviour in filtering owners NOPALL-3674 NOP Logfile (SATLOG) grows after migration NOP 5.4.3 CF14 to 5.5.2 C NOPALL-3678 z/OS: No node logon possible to "technical" RACF userid without pass NOPALL-3679 Error by using empty symbol tables by activating a network - Follow- NOPALL-3685 Unnecessary continuation lines when starting a job in BS2000 from NO NOPALL-3691 More than 100 symbol tables in active Network NOPALL-3693 OGC (Server): Edit of active JCL fails with more than 100 Lines NOPALL-3697 Report RE-ACO-P: Performance in Batch Mode NOPALL-3699 Input Condition depending on Symbol: No Log Message, if Symbol is mi NOPALL-3700 Incomplete SYSOUT transfer from Linux to BS2000 NOPALL-3702 Pre-filled Values For Escape Characters In Job Definition NOPALL-3704 NAT program defined as EOJ action is executed at network activation NOPALL-3706 OGC + CUI - EOR1070 - Networks can't be deleted Changes made for cumulative fix NOP552I002 ------------------------------------------ NOPALL-3341 OGC Import / Export e-mail messages: Correction of header and conten NOPALL-3385 CE: Next scheduled network starts: Deactivate all active Networks in NOPALL-3478 Temporary elements in library SYSEORU not deleted NOPALL-3486 Additional network execution displayed at the turn of the year NOPALL-3515 Performance: Check necessity of Node Logon before Linux Job executio NOPALL-3563 OGC - Export Summary missing NOPALL-3564 Pre-generated JCL overwritten, if a network has several versions NOPALL-3619 NOP 552 CF2 several corrections NOPALL-3623 NOP does not replace variable for Email for network NOPALL-3624 Utility to list jobs with empty or invalid JCL userid or submit user NOPALL-3634 Suspension functionality: Post-corrections NOPALL-3635 z/VSE Corrections NOPALL-3636 EXPORT ALL Parameter for IE-EXA-P need to be corrected NOPALL-3638 Monitor Error NAT0966 in SYSEOR/EJC----P Line 6774 NOPALL-3639 EOR2030 - Monitor Error NAT1305 in RSM-US-N Line 8200 NOPALL-3641 Some adaptations for the ESM Adapter (BS2000) NOPALL-3647 Unnecessary logon requests with "Submit Security User Type" = Owner NOPALL-3648 Definition of a job suffix symbol for dynamic use NOPALL-3649 NOPUT1-P: API NOPUSY7N invocation: Multiple symbol reading with 'N' NOPALL-3651 Browsing BS2000 SYSOUT from NOP on Unix fails with 'SO-XB--P 1500 - NOPALL-3653 Pgm SYSEOR/CL-JA--N Line 2990 Error NAT1257/0000 Changes made for cumulative fix NOP552I001 ------------------------------------------ NOPALL-2986 Loading JCL fails due to Invalid UserID NOPALL-3481 Active condition list: Show modification date + time, instead of act NOPALL-3561 Import v551/4 rejects jobs (migrated from v543) dependent on symbol NOPALL-3567 NOP 552 CF1 several corrections NOPALL-3569 BS2000 openFT Usage - Continuation NOPALL-3571 Symbol table missing when Network export is executed via batch job NOPALL-3575 Network Export from Owner SYSTEM impossible NOPALL-3576 Active Job - SYSOUT Browsing (CUI) - File name in header incorrect, NOPALL-3590 The "Day Deadline" is not observed NOPALL-3591 EOR2030 - Monitor Error NAT3009 in SYSEOR/IRREL--N Line 2455 NOPALL-3597 CUI: Change Monitor Node: NAT3144 in DF-MO--P line 5160 NOPALL-3602 Unexpected 'Logon failed' global message during job execution tracki NOPALL-3603 EOJ Action "Set Symbols Y" not imported correctly 8.0 Installation Install using the Software AG Update Manager or Command Central (9.7 or later). For instructions, see the corresponding documentation at http://documentation.softwareag.com. Pre-installation step(s): The Natural Buffer Pool must be active. 8.1 Installation Requirements ****************************** Prerequisites on Unix Servers: - Natural version * 9.2_SP1 or * 9.3_SP1 - System Automation Tool version SAT 3.5_SP2 or above For Entire Operations GUI client (OGC) users: - Natural version which contains Entire Operations GUI client version 5.5_SP2 Necessary fixes and updates: - System Automation Tools fix version 3.5_SP2_Fix3 or above Recommended fixes and updates: - Entire System Server fix version 2.1_SP17 or above For Entire Operations GUI client users: - Entire System Management GUI Framework * EGF_9.2_SP1_Fix6 or * EGF_9.3_SP1_Fix3 depending of the Natural version 9.0 Uninstallation Note: These instructions can only be used to uninstall the most recently installed fix. This action will revert your installation to the previously installed fix. You cannot apply these instructions to the previously installed fix. 10.0 Globalization None 10.1 Localization None 11.0 Copyright Copyright © 2006-2024 Software AG, Darmstadt, Germany and/or Software AG USA Inc., Reston, VA, USA, and/or its subsidiaries and/or its affiliates and/or their licensors. The name Software AG and all Software AG product names are either trademarks or registered trademarks of Software AG and/or Software AG USA Inc. and/or its subsidiaries and/or its affiliates and/or their licensors. Other company and product names mentioned herein may be trademarks of their respective owners. Detailed information on trademarks and patents owned by Software AG and/or its subsidiaries is located at http://softwareag.com/licenses. This software may include portions of third-party products. For third-party copyright notices, license terms, additional rights or restrictions, please refer to "License Texts, Copyright Notices and Disclaimers of Third Party Products". For certain specific third-party license restrictions, please refer to section E of the Legal Notices available under "License Terms and Conditions for Use of Software AG Products / Copyright and Trademark Notices of Software AG Products". These documents are part of the product documentation, located at http://softwareag.com/licenses and/or in the root installation directory of the licensed product(s). Use, reproduction, transfer, publication or disclosure is prohibited except as specifically provided for in your License Agreement with Software AG. 12.0 Contacting Us Authorized technical support contacts can reach Software AG Global Support in the following ways: Web: https://empower.softwareag.com (online support center) E-mail: empower@softwareag.com You can find complete contact information in our Global Support Contact Directory at: https://empower.softwareag.com/public_directory.asp You can also visit our Software AG Developer Communities to access additional articles, demos, and tutorials, technical information, samples, useful resources, online discussion forums moderated by Software AG professionals, and more at: http://communities.softwareag.com/ecosystem/communities/public/index.html