                 Entire Operations 5.5 SP2 Fix 0011 readme
                             Apr 2024

_________________________________________________________________


Contents:

1.0   Fix Name
2.0   Fix ID
3.0   Product(s)/Component(s) Affected
4.0   Requirements
5.0   Platform Support
6.0   Cautions and Warnings
7.0   Fix Contents
8.0   Installation
9.0   Uninstallation
10.0  Globalization
11.0  Copyright
12.0  Contacting Us



1.0 Fix Name

Entire Operations 5.5 SP2 Fix 0011


2.0 Fix ID

NOP_5.5_SP2_Fix11



3.0 Product(s)/Component(s) Affected

This fix affects product Entire Operations.



4.0 Requirements

For language pack requirements, see the Globalization section of
the Software AG Empower Product Support website at
https://empower.softwareag.com/Products/Globalization/default.asp



5.0 Platform Support

Same platforms as product release.



6.0 Cautions and Warnings

None.



7.0 Fix Contents

Changes made for cumulative Fix NOP552I011
------------------------------------------------------------------------

NOPALL-4084 MACRO TEST: Email for missing Symbol: Context
  Information missing
     MACRO TEST: E-mail (e.g. global message) for missing
     symbol:The creation of the context information is
     corrected.The context line in the e-mail now looks
     like:Owner :1: - Network :2: - Job :3:
NOPALL-4069 Dummy job is executed although execution node is
  not available
     Dummy and temporary dummy jobs are allowed to be executed,
     even if the execution node is not active.Corrected a
     node testing issue related to this.
NOPALL-4070 Email Sending - Loop, if wildcard in attachment
     1. Avoid monitor loop, if an e-mail attachment name contains
     '*' (asterisk).2. Wildcard handling for attachments is
     explicitly not supported.3. Unix (Linux)
     only:Attachment file names containing '*' (asterisk)
     are allowed.
NOPALL-4062 CUI: Stuck in NOP Active Scheduling Parameters
  Screen
     CUI: Corrected the job active scheduling parameters
     definition.
NOPALL-4089 Multiple symbol values are cut to 54 characters by
  symbol function MV (multiple value)
     Corrected the passing of the returned symbol value for the
     symbol function MV.The maximum symbol value length (120
     bytes) is returned again.This is a post-correction for
     NOPALL-3993.
NOPALL-4082 Follow-up for NOPALL-4026 - No Event, when 'File in
  Use' message is issued for SYSOUT copy to BS2000
     1. Global messages and / or Event Store messages will be
     written for the described error, if the following setting
     is enabled:Global Messages for Events
     Message  Event
     Sending  Store...Job
     not ok, or execution error     Y       Y2. The
     global message for the described case was made more
     readable.See attached hardcopy.
NOPALL-4088 OGC 5.5.2.10 - Saving large JCL with Location NAT
  causes error EOR4000 - Editor error: STAT 504 Session does not
  exist
NOPALL-4090 CUI: EOR4000 - Editor-Fehler: ADD - Cannot allocate
  BP block
     -  New message, if the buffer pool is full during Unix
     (Linux) and Windows SYSOUT Browsing preparation:
     EOR4102 - SYSOUT too large - Editor Buffer Pool full-
     Always write to Unix (Linux) and Windows SYSOUT:
     EOR0338 - SYSOUT Size is :1: BytesNumber ......
     EOR5524102English       EOR4102 - SYSOUT too large -
     Editor Buffer Pool fullGerman        EOR4102 - SYSOUT
     zu gross - Editor Buffer Pool vollTx. EOR4102 -
     SYSOUT too large - Editor Buffer Pool full    .Ex.
     The SYSOUT doesn't fit into the Editor Buffer Pool.
     Notes:    - For NOP on Unix (Linux):      Consider
     the Natural parameter EDTBPSIZE and it's maximum value.
     - You may define a 'SYSOUT Line Limit' for SYSOUT
     Browsing.    .Ac. Consider to open the SYSOUT in
     OGC.    You may also try to browse the SYSOUT it's
     original locationTx. EOR4102 - SYSOUT zu gross
     - Editor Buffer Pool voll    .Ex. Der SYSOUT passt
     nicht in den Editor Buffer Pool.    Anmerkungen:
     - Fuer NOP auf Unix (Linux):      Pruefen sie ggf. den
     Natural-Parameter EDTBPSIZE und seinen maximalem
     Wert.    - Sie koennen ein 'Limit fuer SYSOUT-Zeilen'
     definieren.    .Ac. Versuchen sie ggf. den SYSOUT
     in OGC zu oeffnen.    Versuchen Sie ggf. den SYSOUT an
     seinem originalen Speicherplatz    direkt zu lesen.
NOPALL-4095 NOP 552 CF10: CUI: JCL location change on
  ActiveQueue doesn't work any more
     (Side effect of NOPALL-4005. Due to multiple GET statement.
     The last state was lost. It is fixed now.)1.
     Post-correction for NOPALL-4005   Avoid multiple GET
     statement.2. CUI, Job Master and Job Active:
     Don't show member selection, if member field empty.
     Instead, show message EOR0043:   EOR0043 - Member Name
     missing
NOPALL-4096 Error in NOP: PQC-SY-N 1455 - JV def. record
  missing
     1. Avoid superfluous database updates during prerequisite
     checking for input conditions depending on symbol
     value.   This is a post-correction for
     NOPALL-4051.2. Input conditions depending on symbol
     value:   Corrections to the symbol replacement in the
     symbol name and symbol value definitions.
NOPALL-4117 Monitor Error NAT3145 in JARSPWFN Line 1630
     Applied some additional END TRANSACTION statements.This
     shall reduce the likelihood of NAT3145 errors.Please
     note that the issue could not be reproduced in the NOP
     development environment.
NOPALL-4074 Monitor Error NAT3009 in JA-SCS-P Line 2410
NOPALL-4093 NOP 5.5.2.CF10 - Follow up of SI-492225 and
  NOPALL-3894 - Input condition reference WCW-1 does not work
  over turn of the year
     -  RN-TI--N (Run numbers in time interval)   For more
     robustness, the 'COND-TIME' FIND loop was exchanged by a
     READ loop.-  If an input condition is not found, and if
     it's reference is not RUN, additional information about the
     active condition search will be
     logged.Example:WCW-A - any - WCW-10 not
     found... Reference WCW-10 from 02.01.24 00:00 to
     02.01.24 23:59
NOPALL-4097 Truncation of File Name with DAT Job
     View EOR-JOB-ACTIVE:A-FTP-REMOTE-HOST is a redefinition
     of A-DAT-TARGET-FILE, using the same Adabas
     field.Enlarged it's size from A50 to A54, like
     A-DAT-TARGET-FILE.This shall avoid the unwanted cutting
     of A-DAT-TARGET-FILE to 50 bytes.
NOPALL-4094 OGC 552 CF10 - JCL Load Mode 'S': Changes to the
  active JCL of a job are not taken into account when the job is
  repeated
     The text for the third re-submission option was incorrect
     and misleading.This is corrected.See attached
     hardcopies and doc input in NOPALL-4107.
NOPALL-4106 NOP543/13 CL-SYA-P 2120 NAT3113 Specified ISN
  invalid. DB/FNR/Subcode 216/36/0
     CL-SYA-P:Corrected the deletion of active symbols. The
     deletion is separated from the READ loop now.Tx.
     EOR2873 - Cleanup by Monitor locked since :1:
     .Ex. The Cleanup is locked, to prevent other parallel
     cleanups to be    processed.    .Ac. If the
     cleanup lock is not released automatically, you may
     consider    to release it with the utility CLLOCK-T.
NOPALL-4114 OGC 5.5.2 CF10: Last 20 lines duplicated during
  SAVE with JCL Location MAC
NOPALL-4098 Follow up of NOPALL-4081 and SI-548810 for 5.5.2
  CF10- Usage of NOP API NOPUNX1N - LOGOUT during READ-FILE Loop
     1. Corrected and enhanced the setting of NPROS
     session-related parameters, mainly for the API
     NOPUNX1N.This is required for the enhanced session
     handling, which comes with NPROS-409 (NPROS 2.1.17
     CF2).2. At some locations additional error handling
     for the new NPROS error codes (with NPROS-409):#define
     NPR_SESSION_REQUIRED      50   /* session required
     21H 02 ff.    NP409 */   /* The function
     requires a session number, but none is given.
     NP409 */#define NPR_SESSION_NOT_FOUND     51
     /* session not found                 21H 02 ff.    NP409
     */   /* The session was not found in the internal
     session table                             NP409
     */3. Additional correction for NOP CUI SYSOUT
     browsing for NPROS Windows.   Using identifier N4098.1
     .4. API NOPUNX1N return texts are missing
     sometimes.   Using identifier N4098.2 .
NOPALL-4120 MAC-GE-P does not catalog MACROs for job type DAT
     MACRO bulk generation (MAC-GE-P):Corrected the filter
     for suitable job master objects:-  The JCL location
     must be 'MAC'.-  JCL file and JCL member must not be
     empty.-  JOB types DUM (dummy) and NET (subnetwork)
     will be skipped.
NOPALL-4079 OGC: MACRO JCL Command TEST - NAT0610 This
  statement is not permitted in reporting mode
NOPALL-4038 New 'effective to' attribute in the Network
  Schedule Definition
     NOP CUI:Added 'effective to' attribute in the Network
     Schedule Definition.Please refer to NOPALL-4039 for the
     description.
NOPALL-4123 CUI: Stuck in NOP Active Scheduling Parameters
  Screen - follow up to NOPALL-4062
     Follow-up fpr NOPALL-4062.Renamed the text for PF4 to
     'Quit', to be conform with other such cases.Mentioned
     PF4 'Quit' in the CUI online help.Prepared
     documentation input. See NOPALL-4124.
NOPALL-4133 Multiple Unix nodes with same node number - No EOJ
  actions of uninvolved jobs
     Avoid NAT1316 during Node Logoff for an Unix or Windows
     node.
NOPALL-4128 Export of EOJ string check omits leading blank
     NOP Export:OBJECT=EOJ-CHECK-MASTERThe attribute
     EVENT-NAME will be enclosed in double quotes
     now.Example:EVENT-NAME=" 0 SAETZE"Leading
     blanks in this attribute will be kept and will be
     re-imported properly.
NOPALL-2873 Direct 'OPEN Natural Member' function in Job
  Definition dialog


Changes made for cumulative Fix NOP552I010
------------------------------------------------------------------------

NOPALL-4081 Usage of NOP API NOPUNX1N - LOGOUT during READ-FILE loop, when NP
NOPALL-4080 Batch catalog of MACROs abends when one member
  cannot be cataloged
NOPALL-4035 z/OS: MACRO JCL loaded incompletely - sporadically
NOPALL-4029 Job in passive wait for resource, but resource
  available
NOPALL-4021 NOP 552 CF10 several corrections
NOPALL-4037 OGC - Error NAT1316 while attempting to set a
  condition, within Network Graphics
NOPALL-4048 After using wildcard for profile when adding a new
  user, user won't be added
NOPALL-4005 Error NAT3144 in line 5595 of JA-DJ--P
NOPALL-3980 NOP 5.5.2.8 + Hotfix 31: NOP on Unix: Error NAT0104
  occurs during batch catalog
NOPALL-4057 P-REPEAT and P-REPEAT-COUNT symbols faulty
NOPALL-4051 Recursive Symbol Resolution in Input Conditions
NOPALL-4008 BS2000 LMS Member Name in Job List of Network only
  8 Characters
NOPALL-4054 NPR Node not active - due to end-of-job check
  issues for excessive Unix SYSOUT size --> SYSOUT Size Limit
NOPALL-4042 OGC/RPC - EXX10030069 opening SYSOUT (for one user
  only) after NPR upgrade
NOPALL-4071 OGC  - DAT Job cannot be defined for BS2000
  execution nodes (ESA)
NOPALL-4073 Error handling using program MAC-GE-P (MACRO
  Generation)


Changes made for cumulative Fix NOP552I009
------------------------------------------------------------------------

NOPALL-4027 OGC and NOW: Waiting for: Actions for active Input Conditions dep
NOPALL-3894 Input condition reference WCW-1 does not work over
  turn of the year
NOPALL-3987 CAPS setting cannot be saved in SAG Editor
NOPALL-4010 BS2000: Line wrap undercuts subsystem specific
  double-slash
NOPALL-3979 SYSOUT Browsing: Unix SYSOUT not found, after
  SYSOUT Copy to BS2000. GUI OK.
NOPALL-4006 Finish editing JCL with SAVE will not save last
  change
NOPALL-3998 Follow-up of itrac NOPALL-3966: Blockade Situation
  with Resources
NOPALL-3981 Cyclic job: JCL load behavior, load mode 'S'
NOPALL-4020 SYSOUT Browsing Issues with UTF-8 characters
NOPALL-4026 No Event, when 'File in Use' message is issued for
  SYSOUT copy to BS2000
NOPALL-4028 NAT-Error in symbol function in input condition
  check causes emergency Monitor shutdown[or abend
NOPALL-3991 When calling a subnet with more than 5 levels, the
  subnet is not 'terminated'
NOPALL-3971 Logon Prompt to Linux Node with unresolved Symbol
  in User ID
NOPALL-3978 OGC: Deleting an active input condition: EOR0070 -
  No Objects found for Selection Criteria
NOPALL-3977 Import/Export several runtime errors
NOPALL-3972 Batch Cataloging of MACROs on Unix - MAC-GE-P -
  EOR4000 - Editor Error: UPDM 504 Session does not exist
NOPALL-3982 End-of-job action - Set symbol - Length > 80
NOPALL-3984 NOP on Linux: SAG Editor of active JCL duplicates
  or triples last line after editing
NOPALL-3976 MACRO JCL Loading: Logon to Execution Node (an ESA
  node): NPR5510
NOPALL-3993 Error in Symbol Function TIMN
NOPALL-3983 Export Network Defintion HIST-DAY= is displayed
  with 1 day delay (Tag Versatz) gespeichert
NOPALL-4000 NPROS node disappears from system without error
  messages - NOP Part
NOPALL-3994 Usage of Symbol Function ?W with Recursive Symbol
  Resolution
NOPALL-3986 NAT Member as EOJ Exit - Library SYSEORU has
  precedence before user-defined library
NOPALL-4007 Import function refuses EOJ-Action with Symbol
  length > 20
NOPALL-4001 NOP 5.5.2.8 + Fix31-35: Logon error leaked into
  other job
NOPALL-3989 File existence check with symbols, that are created
  during the network run
NOPALL-4025 No short Text with EOJ Action 'Symbol Setting', if
  Symbol missing


Changes made for cumulative Fix NOP552I008
------------------------------------------------------------------------

NOPALL-3947 User in OGC has Access to Active Jobs w/o Access Rights in NOP (N
NOPALL-3949 BS2000 Job Variable Checking via ESA: Monitor Task
  Usage is too high
NOPALL-3955 File Existence Check with wildcard: Error message
  instead of defined action
NOPALL-3875 OGC - NAT0104 error during TEST or MACRO function
  of a MACRO
NOPALL-3961 Recursive Symbol Resolution in Input Conditions
NOPALL-3963 File Existence Check with long Pathname ignored
NOPALL-3959 Multiple symbol values are cut to 54 characters by
  symbol function MV (multiple value)
NOPALL-3917 BS2000 via ESA: EOJ Checking, Input Condition
  depending on Job Variable: Handling of 'Node not active'
NOPALL-3953 Import - Status 'aborted' import despite success
NOPALL-3860 Error with Monitor Defaults / Monitor UserId
NOPALL-3967 Node level user id is not honored as Submit User ID
  in the search hierarchy
NOPALL-3965 Node as a Symbol - Evaluation Error
NOPALL-3905 Remove OPO from NOP - CUI and Monitor
NOPALL-3966 Blockade Situation with Resources
NOPALL-3936 Input Condition Type DUM with Symbol Value not
  honored
NOPALL-3858 EOR2030 Monitor-Fehler NAT0082 in . Zeile 0
NOPALL-3923 NAT1305 in RN-TI--N line 2995
NOPALL-3930 OPJACJ-N: Typo Correction
NOPALL-3929 Error NAT1305 in IENMX1-N line 1340
NOPALL-3932 Error NAT0938 in DI-DF--N line 380 with HotFix
  OP55218 / NOPALL-3820



Changes made for cumulative Fix NOP552I007
------------------------------------------------------------------------

NOPALL-3892 Email notification: Error message not displayed correctly
NOPALL-3895 Condition with reference DUM - subsequent condition
  depending on BS2000 file is not evaluated - postrequisite for
  NOPALL-3882
NOPALL-3868 NOP on Unix: SAG Editor randomly displays wrong
  characters in BS2000 SYSOUT
NOPALL-3893 EOJ check, string check in file, job start escape
  character in fields 'String' and 'in File'
NOPALL-3897 No "Ended not OK" if  SYSOUT limit reached and
  default setting 'Interrupt End-of-Job Checking on BS2000' = B
NOPALL-3886 "?*TIMN" built-in symbol: leading zeroes missing
  before 10:00
NOPALL-3865 Number of Active Jobs > 100
NOPALL-3850 API NOPUNX1N - Add F-LINE-LIMIT in parameter area
  NOPUNX1A
NOPALL-3913 Symbol Resolution in File Existence Checks not at
  Activation Time
NOPALL-3914 Input Condition: File Existence Check Fails because
  of Error: Condition fulfilled
NOPALL-3827 Unix script frame - Don't use realpath command,
  where it is not available
NOPALL-3829 OGC Server - Report 'Activation Overview' Message
  data is not language dependent
NOPALL-3826 Report RE-ACO-P - Usage improvements due to
  performance issues
NOPALL-3828 Two entries are generated per activation - one with
  Type: API and one with Type: Planned - NOP 543 CF21
NOPALL-3832 Additional network execution day displayed at the
  turn of the year
NOPALL-3857 OGC/ESA - ESY5799 at BS2000 LMS Member Selection
NOPALL-3835 NOP on Unix: API NOPUMT3N does not find SYSERR
  messages for library SYSEOR - ESY5999 TCP:socket:24:Too many
  open files
NOPALL-3842 OGC Server ? NAT1316 if too many filters exist for
  one user
NOPALL-3848 CUI: User Definition and Profile / Selection
  Criteria: Enable modification for General Users
NOPALL-3855 NAT1316 in OPJAOP-N Line 4946
NOPALL-3839 Symbol Function D: Error Handling for missing
  Calendar
NOPALL-3854 Node Default User IDs - Differences between NOP and
  OGC
NOPALL-3861 NAT1305 in ICDJV--N Line 3440
NOPALL-3820 Linux: Job result not-ok although it ran with
  return code 0, if 'command not found' detected in SYSOUT
NOPALL-3870 Transfer to NOM even if EOJ action has been removed
  in active Job
NOPALL-3869 Job type DAT: When transferring files with NPR,
  characters are swallowed
NOPALL-3878 API NOPURE2N doesn't block Resource across Network
NOPALL-3884 Input condition reference DUM - File existence
  check without rights: job is started
NOPALL-3890 Faulty re-activation, if latest start time exceeded
NOPALL-3880 Error in EOJ Definition and Execution, if Symbol
  Value is longer than 80 Characters
NOPALL-3862 Inheritance of Parameter Values from Network to
  JOB: BS2000 Account Number
NOPALL-3885 OGC: Job type DAT: Changing the target file in the
  active run not possible
NOPALL-3891 OGC/ESA - ESY5799 at BS2000 LMS Member Selection -
  NOP RPC Server Correction


Changes made for cumulative fix NOP552I006
------------------------------------------

NOPALL-3761 OGC: EOR0240 at JCL location modification from TXT to NAT
NOPALL-3773 OGC-Server: Incomplete error message text for NAT0104
NOPALL-3779 NOP543 CF20: RE-ACO-P causing performance issue - more logging for a
NOPALL-3785 Usage of symbol functions ?D and ?W
NOPALL-3788 BS2000: SYSOUT Selection only shows last Repetition (Current JobId)
NOPALL-3790 NOP 552 CF6 several corrections
NOPALL-3801 Export: EXECUTION-NODE Node Number vs. Short Name
NOPALL-3803 EOR2030 - Monitor Error NAT3009 in PWT----P Line 3430
NOPALL-3804 Set NOP Job to DUM using symbols in input condition doesn't work in
NOPALL-3809 Job definition: Symbol replacement in SYSOUT user ID
NOPALL-3821 OGC - after JCL regeneration and release from hold: job starts witho

Changes made for cumulative fix NOP552I005
------------------------------------------

NOPALL-3427 Validate expiration date in license key at session start
NOPALL-3766 SYSEOR7065 and SYSEOR7254 are not included in NOP552 CF3
NOPALL-3767 Log status 7528:  Symbol not found - Follow-up for NOPALL-3754 and N
NOPALL-3768 Error paging on ActiveQueue - PF7 and PF8
NOPALL-3770 JA-SCS-P Line 1940 Error NAT3009
NOPALL-3772 API NOPUCS1N Function=2, Object Type=S -> RC 103
NOPALL-3786 NAT0966 in RSM-US-N Line 9750
NOPALL-3789 Doc: Input condition reference AAC, Corrections + reference YYYYMMDD

Changes made for cumulative fix NOP552I004
------------------------------------------

NOPALL-3713 Provide exact number of runs on CUI Active Queue
NOPALL-3718 E-Mail notification about network waiting for symbol prompting - Pos
NOPALL-3721 Monitor Error NAT3041 in NOPSYMVN Line 1370
NOPALL-3725 z/OS: No node logon possible to "technical" RACF userid without pass
NOPALL-3728 Unexpected error message 'ICDMS--N 5160 - #EOR-ERC: 70' by using Inp
NOPALL-3732 CUI: z/OS RACF Security Error Handling for JCL Definition
NOPALL-3734 EOR Import fails with error NAT1319
NOPALL-3738 NOP 5.5.2.3 export file cannot be imported to same version
NOPALL-3739 A network activated in the OGC does not appear in the Activation Sum
NOPALL-3740 NOP 543 CF19: Missing objects during Export with IE-EXA-P
NOPALL-3742 NOP EOJ Action "T" ends with NPR FILE/COPY Error
NOPALL-3745 OGC: Using nodes in cross-references
NOPALL-3747 Powershell exit code not carried through
NOPALL-3749 Monitor should not be started from MENUEOR in Batch Mode
NOPALL-3754 Input Condition depending on Symbol: If symbol missing, always wait
NOPALL-3755 New julian date formats in symbol function 'D'

Changes made for cumulative fix NOP552I003
------------------------------------------

NOPALL-3161 API NOPUAC5N - add latest start time (in hours) parameter
NOPALL-3656 NOPUNX1N Password only A16; no enciphered password possible
NOPALL-3658 Server functionality to serve GoJS coordinates
NOPALL-3659 BS2000 Submit: Long lines will be cut at column 80
NOPALL-3667 EOR5509 - Logon fehlerhaft, Kn. 1070 User ID SB - in job execution t
NOPALL-3670 CUI Calendar list: Wrong behaviour in filtering owners
NOPALL-3674 NOP Logfile (SATLOG) grows after migration NOP 5.4.3 CF14 to 5.5.2 C
NOPALL-3678 z/OS: No node logon possible to "technical" RACF userid without pass
NOPALL-3679 Error by using empty symbol tables by activating a network - Follow-
NOPALL-3685 Unnecessary continuation lines when starting a job in BS2000 from NO
NOPALL-3691 More than 100 symbol tables in active Network
NOPALL-3693 OGC (Server): Edit of active JCL fails with more than 100 Lines
NOPALL-3697 Report RE-ACO-P: Performance in Batch Mode
NOPALL-3699 Input Condition depending on Symbol: No Log Message, if Symbol is mi
NOPALL-3700 Incomplete SYSOUT transfer from Linux to BS2000
NOPALL-3702 Pre-filled Values For Escape Characters In Job Definition
NOPALL-3704 NAT program defined as EOJ action is executed at network activation
NOPALL-3706 OGC + CUI - EOR1070 - Networks can't be deleted

Changes made for cumulative fix NOP552I002
------------------------------------------

NOPALL-3341 OGC Import / Export e-mail messages: Correction of header and conten
NOPALL-3385 CE: Next scheduled network starts: Deactivate all active Networks in
NOPALL-3478 Temporary elements in library SYSEORU not deleted
NOPALL-3486 Additional network execution displayed at the turn of the year
NOPALL-3515 Performance: Check necessity of Node Logon before Linux Job executio
NOPALL-3563 OGC - Export Summary missing
NOPALL-3564 Pre-generated JCL overwritten, if a network has several versions
NOPALL-3619 NOP 552 CF2 several corrections
NOPALL-3623 NOP does not replace variable for Email for network
NOPALL-3624 Utility to list jobs with empty or invalid JCL userid or submit user
NOPALL-3634 Suspension functionality: Post-corrections
NOPALL-3635 z/VSE Corrections
NOPALL-3636 EXPORT ALL Parameter for IE-EXA-P need to be corrected
NOPALL-3638 Monitor Error NAT0966 in SYSEOR/EJC----P Line 6774
NOPALL-3639 EOR2030 - Monitor Error NAT1305 in RSM-US-N Line 8200
NOPALL-3641 Some adaptations for the ESM Adapter (BS2000)
NOPALL-3647 Unnecessary logon requests with  "Submit Security User Type" = Owner
NOPALL-3648 Definition of a job suffix symbol for dynamic use
NOPALL-3649 NOPUT1-P: API NOPUSY7N invocation: Multiple symbol reading with 'N'
NOPALL-3651 Browsing BS2000 SYSOUT from NOP on Unix fails with 'SO-XB--P 1500 -
NOPALL-3653 Pgm SYSEOR/CL-JA--N Line 2990 Error NAT1257/0000

Changes made for cumulative fix NOP552I001
------------------------------------------

NOPALL-2986 Loading JCL fails due to Invalid UserID
NOPALL-3481 Active condition list: Show modification date + time, instead of act
NOPALL-3561 Import v551/4 rejects jobs (migrated from v543) dependent on symbol
NOPALL-3567 NOP 552 CF1 several corrections
NOPALL-3569 BS2000 openFT Usage - Continuation
NOPALL-3571 Symbol table missing when Network export is executed via batch job
NOPALL-3575 Network Export from Owner SYSTEM impossible
NOPALL-3576 Active Job - SYSOUT Browsing (CUI) - File name in header incorrect,
NOPALL-3590 The "Day Deadline" is not observed
NOPALL-3591 EOR2030 - Monitor Error NAT3009 in SYSEOR/IRREL--N Line 2455
NOPALL-3597 CUI: Change Monitor Node: NAT3144 in DF-MO--P line 5160
NOPALL-3602 Unexpected 'Logon failed' global message during job execution tracki
NOPALL-3603 EOJ Action "Set Symbols Y" not imported correctly





8.0 Installation

Install using the Software AG Update Manager or
Command Central (9.7 or later). For instructions, see the
corresponding documentation at
http://documentation.softwareag.com.

Pre-installation step(s):
The Natural Buffer Pool must be active.


8.1 Installation Requirements
******************************
Prerequisites on Unix Servers:
 - Natural version 
           * 9.2_SP1 or
		   * 9.3_SP1
 - System Automation Tool version SAT 3.5_SP2 or above
 
For Entire Operations GUI client (OGC) users:
 - Natural version which contains
   Entire Operations GUI client version 5.5_SP2
 
Necessary fixes and updates:
 - System Automation Tools fix version 3.5_SP2_Fix3 or above

Recommended fixes and updates:
 - Entire System Server fix version 2.1_SP17 or above
 For Entire Operations GUI client users:
 - Entire System Management GUI Framework
            * EGF_9.2_SP1_Fix6 or
			* EGF_9.3_SP1_Fix3 
   depending of the Natural version



9.0 Uninstallation

Note: These instructions can only be used to uninstall the most
recently installed fix. This action will revert your installation
to the previously installed fix. You cannot apply these
instructions to the previously installed fix.


10.0 Globalization

None


10.1 Localization

None


11.0 Copyright

Copyright © 2006-2024 Software AG, Darmstadt, Germany and/or
Software AG USA Inc., Reston, VA, USA, and/or its subsidiaries
and/or its affiliates and/or their licensors.

The name Software AG and all Software AG product names are either
trademarks or registered trademarks of Software AG and/or
Software AG USA Inc. and/or its subsidiaries and/or its
affiliates and/or their licensors. Other company and product
names mentioned herein may be trademarks of their
respective owners.

Detailed information on trademarks and patents owned by
Software AG and/or its subsidiaries is located at
http://softwareag.com/licenses.

This software may include portions of third-party products.
For third-party copyright notices, license terms, additional
rights or restrictions, please refer to "License Texts,
Copyright Notices and Disclaimers of Third Party Products". For
certain specific third-party license restrictions, please refer
to section E of the Legal Notices available under "License Terms
and Conditions for Use of Software AG Products / Copyright and
Trademark Notices of Software AG Products". These documents are
part of the product documentation, located at
http://softwareag.com/licenses
and/or in the root installation directory of the
licensed product(s).

Use, reproduction, transfer, publication or disclosure is
prohibited except as specifically provided for in your
License Agreement with Software AG.


12.0 Contacting Us

Authorized technical support contacts can reach Software AG
Global Support in the following ways:

Web: https://empower.softwareag.com (online support center)

E-mail: empower@softwareag.com

You can find complete contact information in our
Global Support Contact Directory at:

https://empower.softwareag.com/public_directory.asp

You can also visit our Software AG Developer Communities to
access additional articles, demos, and tutorials, technical
information, samples, useful resources, online discussion forums
moderated by Software AG professionals, and more at:

http://communities.softwareag.com/ecosystem/communities/public/index.html

