HISTOGRAM

`HISTOGRAM`		`ALL` (`operand1`)		[`MULTI-FETCH-clause`] [`multi-fetch-factor`] [`IN`] [`FILE`] `view-name`
[`PASSWORD=operand2`]
	[`IN`]		`ASCENDING` `DESCENDING` `VARIABLE` `operand3` `DYNAMIC` `operand3`		[`SEQUENCE`]
[`VALUE`] [`FOR`] [`FIELD`] `operand4`
[`STARTING/ENDING-clause`]
[`WHERE` `logical-condition`]
`statement`
`END-HISTOGRAM`				(structured mode only)
`LOOP`				(reporting mode only)

This document covers the following topics:

HISTOGRAM Usage
HISTOGRAM Restrictions
HISTOGRAM Syntax Description
System Variables Available with HISTOGRAM
HISTOGRAM Examples

For an explanation of the symbols used in the syntax diagram, see Syntax Symbols.

Belongs to Function Group: Database Access and Update

HISTOGRAM Usage

The HISTOGRAM statement is used to read the values of a database field which is defined as a descriptor, subdescriptor, or a superdescriptor. The values are read directly from the Adabas inverted lists. The HISTOGRAM statement causes a processing loop to be initiated but does not provide access to any database fields other than the field specified in the HISTOGRAM statement.

See also the following sections in the Programming Guide:

Note:
For SQL databases: HISTOGRAM returns the number of rows which have the same value in a specific column.

HISTOGRAM Restrictions

This statement cannot be used with XML databases.
This statement cannot be used with Entire System Server.

HISTOGRAM Syntax Description

Operand Definition Table:

Operand	Possible Structure		Possible Formats									Referencing Permitted	Dynamic Definition
`operand1`	C	S		N	P	I		B *				yes	no
`operand2`	C	S	A									yes	no
`operand3`		S	A									yes	no
`operand4`		S	A	N	P	I	F	B	D	T	L	no	no

* Format B of operand1 may be used only with a length of less than or equal to 4.

Syntax Element Description:

Syntax Element	Description
`operand1 / ALL`	Number of Descriptor Values: You can limit the number of descriptor values to be processed with the `HISTOGRAM` statement by specifying `operand1` - either as a numeric constant (`0 - 4294967295`) or as a user-defined variable (containing an integer value). `ALL` may optionally be specified to emphasize that all descriptor values are to be processed. For this statement, the specified limit has priority over a limit set with a `LIMIT` statement. If a smaller limit is set with the `LT` parameter (Limit for Processing Loops), the `LT` limit applies. Note: If you wish to process a 4-digit number of descriptor values, specify it with a leading zero `(0nnnn)`; because Natural interprets every 4-digit number enclosed in parentheses as a line-number reference to a statement. `operand1` is evaluated when the `HISTOGRAM` loop is entered. If the value of `operand1` is modified within the `HISTOGRAM` loop, this does not affect the number of values read.
`MULTI-FETCH-clause`	MULTI-FETCH Clause: See MULTI-FETCH Clause below.
`view-name`	View Name: As `view-name`, you specify the name of a view, which is defined either within a `DEFINE DATA` statement or in a separate global or local data area. The view must not contain any other fields apart from the field used in the `HISTOGRAM` statement (`operand4`). If the field in the view is a periodic-group field or multiple-value field that is defined with an index range, only the first occurrence of that range is filled by the `HISTOGRAM` statement; all other occurrences are not affected by the execution of the `HISTOGRAM` statement. In reporting mode, `view-name` is the name of a DDM if no `DEFINE DATA LOCAL` statement is used.
`PASSWORD=operand2`	PASSWORD Clause: The `PASSWORD` clause is used to provide a password (`operand2`) when retrieving data from an Adabas file which is password-protected. See the statements `FIND` and `PASSW` for further information.
`SEQUENCE`	SEQUENCE Clause: This clause can only be used for Adabas and SQL databases. With this clause, you can determine whether the records are to be read in ascending sequence or in descending sequence. The default sequence is ascending (which may, but need not, be explicitly specified by using the keyword `ASCENDING`). If the records are to be read in descending sequence, you specify the keyword `DESCENDING`. If, instead of determining it in advance, you want to have the option of determining at runtime whether the records are to be read in ascending or descending sequence, you either specify the keyword `VARIABLE` or `DYNAMIC`, followed by a variable (`operand3`). `operand3` has to be of format/length A1 and can contain the value `A` (for "ascending") or `D` (for "descending"). If keyword `VARIABLE` is used, the reading direction (value of `operand3`) is evaluated at start of the `HISTOGRAM` processing loop and remains same until the loop is terminated, regardless if the `operand3` field is altered in the `HISTOGRAM` loop or not. If keyword `DYNAMIC` is used, the reading direction (value of `operand3`) is evaluated before every record fetch in the `HISTOGRAM` processing loop and may be changed from record to record. This allows to change the scroll sequence from ascending to descending (and vice versa) at any place in the `HISTOGRAM` loop. Examples of `SEQUENCE` clause: Example 2 - HISTOGRAM Statement with Records Read in Descending Sequence Example 3 - HISTOGRAM Statement Using Variable Sequence
`operand4`	Descriptor: As `operand4`, a descriptor, subdescriptor, superdescriptor or hyperdescriptor may be specified. A descriptor contained within a periodic group may be specified with or without an index. If no index is specified, the descriptor will be selected if the value specified is located in any occurrence. If an index is specified, the descriptor will be selected only if the value is located in the occurrence specified by the index. The index specified must be a constant. An index range must not be used. For a descriptor which is a multiple-value field an index must not be specified; the descriptor will be selected if the value is located in the record regardless of the position of the value.
`STARTING-ENDING-clause`	STARTING/ENDING Clause: Starting and ending values may be specified using the keywords `STARTING` and `ENDING` (or `THRU`) followed by a constant or a user-defined variable representing the value with which processing is to begin/end. For further information, see Specifying Starting/Ending Values below.
`WHERE logical-condition`	WHERE Clause: The `WHERE` clause may be used to specify an additional selection criteria (`logical-condition`) which is evaluated after a value has been read and before any processing is performed on the value (including the `AT BREAK` evaluation). The descriptor specified in the `WHERE` clause must be the same descriptor referenced in the `HISTOGRAM` statement. No other fields from the selected file are available for processing with a `HISTOGRAM` statement. The syntax for a `logical-condition` is described in the section Logical Condition Criteria (in the Programming Guide).
`END-HISTOGRAM`	End of HISTOGRAM Statement: In structured mode, the Natural reserved word `END-HISTOGRAM` must be used to end the `HISTOGRAM` statement. In reporting mode, the Natural statement `LOOP` must be used to end the `HISTOGRAM` statement.
`LOOP`

MULTI-FETCH Clause

Note:
This clause can only be used for Adabas databases.

MULTI-FETCH

ON
OFF
[OF] multi-fetch-factor

Note:
[MULTI-FETCH OF multi-fetch-factor] is supported for database types ADA/ADA2. The default processing mode is applied; see profile parameter MFSET. The MULTI-FETCH clause is ignored in case Adabas LA or large objects fields are used or a view size greater than 64KB is defined.

For more information, see the section MULTI-FETCH Clause (Adabas) in the Programming Guide.

Specifying Starting/Ending Values

Starting and ending values may be specified using the keywords STARTING and ENDING (or THRU) followed by a constant or a user-defined variable representing the value with which processing is to begin/end.

If a starting value is specified and the value is not present, the next higher value is used as the starting value. If no higher value is present, the HISTOGRAM loop will not be entered.

If an ending value is specified, values will be read up to and including the ending value.

Hexadecimal constants may be specified as a starting or ending value for descriptors of format A or B.

Syntax Option 1:

[STARTING]

WITH
FROM

[VALUES] operand5

THRU

operand6

ENDING AT

Syntax Option 2:

[STARTING]

WITH
FROM

[VALUES] operand5

TO

operand6

Syntax Option 3:

	<		`operand5`
	`LT`
	`LESS THAN`
	>
	`GT`
	`GREATER THAN`
	`<=`
	`LE`
	`LESS EQUAL`
	`>=`
	`GE`
	`GREATER EQUAL`

Note:
If the comparators of Diagram 3 are used, the options ENDING AT, THRU and TO may not be used. These comparators are also valid for the READ statement.

Operand Definition Table:

Operand	Possible Structure					Possible Formats													Referencing Permitted	Dynamic Definition
`operand5`	C	S				A	U	N	P	I	F	B	D	T	L				yes	no
`operand6`	C	S				A	U	N	P	I	F	B	D	T	L				yes	no

Syntax Element Description:

Syntax Element Description

Syntax Element	Description
`STARTING FROM ... ENDING AT \|TO`	STARTING FROM / ENDING AT Clauses: The `STARTING FROM` and `ENDING AT` clauses are used to limit reading to a user-specified range of values. The `STARTING FROM` clause (`=` or `EQ` or `EQUAL TO` or `[STARTING] FROM)` determines the starting value for the read operation. If a starting value is specified, reading will begin with the value specified. If the starting value does not exist, the next higher (or lower for a `DESCENDING` read) value will be returned. If no higher (or lower for `DESCENDING`) value exists, the `HISTOGRAM` loop will not be entered. In order to limit the values to an end-value, you may specify an `ENDING AT` clause with the terms `THRU`, `ENDING AT` or `TO`, that imply an inclusive range. Whenever the descriptor field exceeds the end-value specified, an automatic loop termination is performed. Although the basic functionality of the `TO`, `THRU` and `ENDING AT` keywords looks quite similar, internally they differ in how they work.
`THRU \| ENDING AT`	THRU / ENDING AT Option: If `THRU` or `ENDING AT` is used, only the start-value is supplied to the database, but the end-value check is performed by the Natural runtime system, after the value is returned by the database. The `THRU` and `ENDING AT` options can be used for all databases which support the `HISTOGRAM` statements.
`TO`	Range: If the keyword `TO` is used, both the start-value and the end-value are sent to the database and Natural does not perform checks for value ranges. If the end-value is exceeded, the database reacts in the same way as when "end-of-file" is reached and the database loop is exited. Since the complete range checking is done by the database, the lower-value (of the range) is always supplied in the start-value and the higher-value filled into the end-value, regardless whether you are browsing in `ASCENDING` or in `DESCENDING` order.

STARTING FROM ... ENDING AT
                                                  |TO

STARTING FROM / ENDING AT Clauses:

The STARTING FROM and ENDING AT clauses are used to limit reading to a user-specified range of values.

The STARTING FROM clause (= or EQ or EQUAL TO or [STARTING] FROM) determines the starting value for the read operation. If a starting value is specified, reading will begin with the value specified. If the starting value does not exist, the next higher (or lower for a DESCENDING read) value will be returned. If no higher (or lower for DESCENDING) value exists, the HISTOGRAM loop will not be entered.

In order to limit the values to an end-value, you may specify an ENDING AT clause with the terms THRU, ENDING AT or TO, that imply an inclusive range. Whenever the descriptor field exceeds the end-value specified, an automatic loop termination is performed. Although the basic functionality of the TO, THRU and ENDING AT keywords looks quite similar, internally they differ in how they work.

THRU | ENDING AT

THRU / ENDING AT Option:

If THRU or ENDING AT is used, only the start-value is supplied to the database, but the end-value check is performed by the Natural runtime system, after the value is returned by the database.

The THRU and ENDING AT options can be used for all databases which support the HISTOGRAM statements.

TO

Range:

If the keyword TO is used, both the start-value and the end-value are sent to the database and Natural does not perform checks for value ranges. If the end-value is exceeded, the database reacts in the same way as when "end-of-file" is reached and the database loop is exited. Since the complete range checking is done by the database, the lower-value (of the range) is always supplied in the start-value and the higher-value filled into the end-value, regardless whether you are browsing in ASCENDING or in DESCENDING order.

Note:
The result of READ/HISTOGRAM THRU/ENDING AT might differ from the result of READ/HISTOGRAM TO if Natural and the accessed database reside on different platforms with different collating sequences.

System Variables Available with HISTOGRAM

The Natural system variables *ISN, *NUMBER, and *COUNTER are available with the HISTOGRAM statement.

*NUMBER and *ISN are only set after the evaluation of the WHERE clause. They must not be used in the logical condition of the WHERE clause.

System Variable Explanation

System Variable	Explanation
`*NUMBER`	The system variable `NUMBER` contains the number of database records that contain the last value read. For SQL databases, see NUMBER for SQL Databases in the System Variables documentation.
`*ISN`	The system variable `ISN` contains the number of the occurrence in which the descriptor value last read is contained. `ISN` will contain `0` if the descriptor is not contained within a periodic group. `*ISN` is not available for SQL databases.
`*COUNTER`	The system variable `*COUNTER` contains a count of the total number of values which have been read (after evaluation of the `WHERE` clause).

*NUMBER

The system variable *NUMBER contains the number of database records that contain the last value read.

For SQL databases, see *NUMBER for SQL Databases in the System Variables documentation.

*ISN

The system variable *ISN contains the number of the occurrence in which the descriptor value last read is contained. *ISN will contain 0 if the descriptor is not contained within a periodic group.

*ISN is not available for SQL databases.

*COUNTER The system variable *COUNTER contains a count of the total number of values which have been read (after evaluation of the WHERE clause).

HISTOGRAM Examples

Example 1 - HISTOGRAM Statement
Example 2 - HISTOGRAM Statement with Records Read in Descending Sequence
Example 3 - HISTOGRAM Statement Using Variable Sequence

Example 1 - HISTOGRAM Statement

** Example 'HSTEX1S': HISTOGRAM (structured mode)                       
************************************************************************
DEFINE DATA LOCAL                                                       
1 EMPLOY-VIEW VIEW OF EMPLOYEES                                         
  2 CITY                                                                
END-DEFINE                                                              
*                                                                       
LIMIT 8                                                                 
HISTOGRAM EMPLOY-VIEW CITY STARTING FROM 'M'                  
  DISPLAY NOTITLE                                                       
          CITY 'NUMBER OF/PERSONS' *NUMBER *COUNTER                     
END-HISTOGRAM                                                      
*                                                                       
END

Output of Program HSTEX1S:

        CITY          NUMBER OF     CNT     
                       PERSONS              
-------------------- ----------- -----------
                                            
MADISON                        3           1
MADRID                        41           2
MAILLY LE CAMP                 1           3
MAMERS                         1           4
MANSFIELD                      4           5
MARSEILLE                      2           6
MATLOCK                        1           7
MELBOURNE                      2           8

Equivalent reporting-mode example: HSTEX1R.

Example 2 - HISTOGRAM Statement with Records Read in Descending Sequence

** Example 'HSTDSCND': HISTOGRAM (with DESCENDING)                     
***********************************************************************
DEFINE DATA LOCAL                                                      
1 EMPL VIEW OF EMPLOYEES                                               
  2 NAME                                                               
END-DEFINE                                                             
*                                                                      
HISTOGRAM (10) EMPL IN DESCENDING SEQUENCE FOR NAME FROM 'ZZZ' 
  DISPLAY NAME *NUMBER                                                 
END-HISTOGRAM                                                   
END

Output of Program HSTDSCND:

Page      1                                                  05-01-13  13:41:03
                                                                               
        NAME            NMBR                                                   
-------------------- -----------                                               
                                                                               
ZINN                           1                                               
YOT                            1                                               
YNCLAN                         1                                               
YATES                          1                                               
YALCIN                         1                                               
YACKX-COLTEAU                  1                                               
XOLIN                          1                                               
WYLLIS                         2                                               
WULFRING                       1                                               
WRIGHT                         1

Example 3 - HISTOGRAM Statement Using Variable Sequence

** Example 'HSTVSEQ': HISTOGRAM (with VARIABLE SEQUENCE)               
***********************************************************************
DEFINE DATA LOCAL                                                      
1 EMPL VIEW OF EMPLOYEES                                               
  2 NAME                                                               
*                                                                      
1 #DIR      (A1)                                                       
1 #STARTVAL (A20)                                                      
END-DEFINE                                                             
*                                                                      
SET KEY PF3 PF7 PF8                                                    
*                                                                      
MOVE 'ADKINSON' TO #STARTVAL                                           
*                                                                      
HISTOGRAM (9) EMPL FOR NAME FROM #STARTVAL                             
  WRITE NAME *NUMBER                                                   
  IF *COUNTER = 5                                                      
    MOVE NAME TO #STARTVAL                                             
  END-IF                                                               
END-HISTOGRAM                                             
*                                                         
#DIR := 'A'                                               
*                                                         
REPEAT                                                    
  HISTOGRAM EMPL IN VARIABLE #DIR SEQUENCE                
            FOR NAME FROM #STARTVAL                       
    MOVE NAME TO #STARTVAL                                
    INPUT NO ERASE  (IP=OFF AD=O)                         
          15/01 NAME *NUMBER                              
          //   'Direction:' #DIR                          
          //   'Press PF3 to stop'                        
          /    '      PF7 to go step back'                
          /    '      PF8 to go step forward'             
          /    '      ENTER to continue in that direction'
    /*                                                    
    IF *PF-KEY = 'PF7' AND #DIR = 'A'                     
      MOVE 'D' TO #DIR                                    
      ESCAPE BOTTOM                                       
    END-IF                           
    IF *PF-KEY = 'PF8' AND #DIR = 'D'
      MOVE 'A' TO #DIR               
      ESCAPE BOTTOM                  
    END-IF                           
    IF *PF-KEY = 'PF3'               
      STOP                           
    END-IF                           
  END-HISTOGRAM                      
  /*                                 
  IF *COUNTER(0250) = 0              
    STOP                             
  END-IF                             
END-REPEAT                           
END

Output of Program HSTVSEQ:

Page      1                                                  05-01-13  13:50:31
                                                                               
ADKINSON                       8                                               
AECKERLE                       1                                               
AFANASSIEV                     2                                               
AHL                            1                                               
AKROYD                         1                                               
ALEMAN                         1                                               
ALESTIA                        1                                               
ALEXANDER                      5                                               
ALLEGRE                        1                                               
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
                                                                               
MORE

After pressing ENTER:

Page      1                                                  05-01-13  13:50:31
                                                                               
ADKINSON                       8                                               
AECKERLE                       1                                               
AFANASSIEV                     2                                               
AHL                            1                                               
AKROYD                         1                                               
ALEMAN                         1                                               
ALESTIA                        1                                               
ALEXANDER                      5                                               
ALLEGRE                        1                                               
                                                                               
                                                                               
                                                                               
AKROYD                         1                                               
                                                                               
Direction: A                                                                   
                                                                               
Press PF3 to stop                                                              
      PF7 to go step back                                                      
      PF8 to go step forward                                                   
      ENTER to continue in that direction