Text |
Logon failed after ... consecutive errors. |
Explanation |
The Natural session has been terminated as a result of too many unsuccessful logon attempts. |
Action |
Start a new Natural session after verifying your user ID and/or password. |
Text |
No access rights defined for this utility. |
Explanation |
The utility is for restricted use only. |
Action |
Please contact your security administrator. |
Text |
Access to system file ... denied, reason .... |
Explanation |
Reason:
1 - Natural for Linux: The system file is not in NATCONF.CFG.
2 - The use of the system file is restricted in a Natural
Development Server environment.
4 - Access denied to this system-file combination.
9 - Natural utility system-file combination is not defined.
10 - Environment profile is not defined.
11 - Your group ID has no access to this system-file combination.
12 - Your user ID has no access to this system-file combination.
14 - User ID has no access to this library and system-file combination.
|
Action |
Contact your Natural Security administrator. |
Text |
Libraries SYSLIB and SYSLIBS reserved for system usage. |
Action |
Log on to another library. |
Text |
Re-enter new password to confirm password change. |
Explanation |
If you wish to change your password, you must type in the new password a second time so as to confirm the password change. This confirmation is necessary to prevent typing errors in passwords (which may occur as the password and new password are not visible on the logon screen). |
Action |
If password modification was intended, enter your new password again. If password modification was not intended, press ENTER to resume the logon procedure. |
Text |
New password was not confirmed; logon failed. |
Explanation |
The logon procedure required that you enter your new password a second time so as to confirm the password change. However, the second time you entered either no new password at all or one which was different from that entered the first time; this means that the password change was not confirmed. |
Action |
Log on again. |
Text |
Library not found. |
Explanation |
The library to which you wish to log on is not defined to Natural Security. Under Natural Security, any Natural library which is to be used must have been defined to Natural Security. |
Action |
Contact your Natural Security administrator. |
Text |
Logon to this library is not permitted. |
Explanation |
The library to which you wish to log on is protected. To be able to log on to this library, you must be linked to it, but you are not. |
Action |
Contact your Natural Security administrator. |
Text |
No restartable library found. |
Explanation |
You have specified "RESTART" in the logon procedure, but no restart library was available. |
Action |
Use the RESTART option only after having been active in a library; and/or contact your Natural Security administrator. |
Text |
Terminal ID not permitted for logon. |
Explanation |
A terminal ID was entered as a user ID. This is not permitted. Access to a terminal-protected library may be gained by using the library ID. |
Action |
Use the appropriate library ID and no user ID. |
Text |
Group ID not permitted for logon. |
Explanation |
A group ID was entered as a user ID in the logon procedure. However, group IDs cannot be used in the logon procedure; they are only relevant for links to libraries. |
Action |
Log on with your correct user ID. |
Text |
A user ID must be entered. |
Explanation |
A Natural session cannot be activated if no user ID is specified for the initial logon to Natural. For subsequent logons, a user ID need not be specified. Natural internally uses the initial user ID until another user ID is specified. If Natural Security is installed, a user ID must be specified with each logon. |
Action |
Enter a valid user ID. |
Text |
User security profile has been illegally manipulated. |
Explanation |
The Natural Security logon procedure has detected an internal inconsistency in the security profile for the specified user ID. The user security profile was modified by a direct manipulation of the data record. |
Action |
Contact your Natural Security administrator. |
Text |
Logon to default library not permitted. |
Explanation |
Your default library is not available to you. |
Action |
Contact your Natural Security administrator. |
Text |
Library ID and/or user ID must be entered. |
Explanation |
On the logon screen, you must enter a library ID, or a user ID, or both. |
Action |
Enter user ID and/or library ID. |
Text |
Please enter a library ID. |
Explanation |
There is neither a default library defined for you nor have you a private library. Therefore you must explicitly specify the library to which you wish to log on. |
Action |
Enter a library ID; or enter a "?" to get a list of the libraries that are available to you. |
Text |
The library may not be accessed from this terminal. |
Explanation |
You have tried to access a library which may be accessed only from certain terminals, but not from the one you are using. |
Action |
Contact your Natural Security administrator. |
Text |
Logon with a batch user ID not permitted in nonbatch mode. |
Explanation |
You attempted to log on using a batch user ID although batch mode is not active. This is not permitted. |
Action |
Log on using a user ID with type not equal to "batch". |
Text |
User ID is missing or this terminal is not defined. |
Explanation |
Either you have forgotten to enter your user ID, or you have tried to log on from a terminal which is not defined to Natural Security. |
Action |
Enter your user ID, or contact your Natural Security administrator. |
Text |
Logon unsuccessful (batch mode execution). |
Explanation |
An unsuccessful attempt to log on in a batch Natural session was detected. This error message follows the detailed error message that describes the reason for the failed logon. |
Action |
Act according to explanation of detailed message. |
Text |
Terminal security profile was illegally manipulated. |
Explanation |
The Natural Security logon procedure detected an internal inconsistency in the security profile of the terminal from which you have tried to log on. The security profile was modified by a direct manipulation of the database record. |
Action |
Contact your Natural Security administrator. |
Text |
Library available only for .... |
Explanation |
You have attempted to log on to a library which may only be used from the device type indicated. |
Action |
Use the library only from the allowed device type. |
Text |
User"s private library only available for .... |
Explanation |
You have attempted to log on to a private library which may only be used from the device type indicated. |
Action |
Use the private library only from the allowed device type. |
Text |
Logon with a batch user ID is not permitted. |
Explanation |
You attempted to log on using a batch user ID. This user ID cannot be used to log on directly in batch mode. |
Action |
Log on using a user ID with type not equal to "batch". |
Text |
Library security profile was illegally manipulated. |
Explanation |
The Natural Security logon procedure has detected an internal inconsistency in the security profile of the specified library. The security profile was modified by a direct manipulation of the database record. |
Action |
Contact your Natural Security administrator. |
Text |
Security profile has been illegally manipulated. |
Explanation |
The Natural Security logon procedure has detected an internal inconsistency in a security profile invoked. The security profile was modified by a direct manipulation of the database record. |
Action |
Contact your Natural Security administrator. |
Text |
Invalid number. Please enter valid number. |
Explanation |
Only one of the displayed numbers may be entered during the logon procedure. |
Action |
Enter a valid number. |
Text |
No available library found. |
Explanation |
No library for this user ID is available from this terminal. |
Action |
Contact your Natural Security administrator. |
Text |
You may not logon to "SYSSEC". |
Explanation |
You have no permission to log on the Natural Security library "SYSSEC". |
Action |
Contact your Natural Security administrator. |
Text |
Password change not permitted. |
Explanation |
You cannot change your password because updating of the Natural Security system file has been prohibited. |
Action |
Contact your Natural Security administrator. |
Text |
Help screen not confirmed. |
Explanation |
An attempt was made to enter logon processing, but the requested confirmation was not provided. |
Action |
Continue logon. |
Text |
***** Natural LOGON PROCEDURE ***** |
Explanation |
Text displayed in line 1 during Natural logon procedure. |
Text |
**** YOU ARE LINKED DIRECTLY TO: ... **** |
Explanation |
Text displayed in line 2 during Natural logon procedure. |
Text |
**** YOU ARE LINKED VIA A GROUP TO: ... **** |
Explanation |
Text displayed in line 3 during Natural logon procedure. |
Text |
*** YOUR TERMINAL IS LINKED TO: ... *** |
Explanation |
Text displayed in line 2 during Natural logon procedure. |
Text |
*** PUBLIC LIBRARIES ARE: ... *** |
Explanation |
Text displayed on line 2 as a result of entering a "?" as library ID during Natural logon procedure. |
Text |
Press ENTER for next page, or enter "." for logon screen. |
Explanation |
Text displayed during logon processing for trailer line 1. |
Text |
Or select a library by entering its number ==> |
Explanation |
Text displayed as trailer line 2 during logon processing. |
Text |
Change your password. Enter the old and a new password. |
Explanation |
According to your Natural Security profile, you must change your password periodically. |
Action |
Enter your old password in the "Password" field and a new password in the "New Password" field. When prompted to confirm the new password, enter the new password again in the "New Password" field. |
Text |
The library "SYSSEC" ... has not been found. |
Explanation |
The library "SYSSEC" is indispensable for a security environment. The FSEC system file could not be initialized correctly, because in the system file, the internal control record for the library "SYSSEC" is missing. |
Action |
Contact your Natural Security administrator. |
Text |
Private library not found. |
Explanation |
The security profile of the private library specified for you could not be found. The Natural Security logon procedure has found an internal inconsistency: a private library is specified in your user security profile but there is no security profile for the private library. |
Action |
Contact your Natural Security administrator. |
Text |
This user has no private library. |
Explanation |
A logon to a private library is only possible for users of type "ADMINISTRATOR" or "PERSON" and only if these users have a private library defined in their security profile. |
Action |
Enter a library ID, or a "?" to get a list of libraries that are available to you. |
Text |
Logon to a private library is not allowed. |
Explanation |
You have attempted to log on to somebody else"s private library. You cannot log on to another user"s private library, only to your own (if there is one defined for you). |
Action |
Enter a library ID, or a "?" to get a list of libraries that are available to you. |
Text |
Invalid user ID for automatic logon. |
Explanation |
If "Automatic Logon" is active (that is, the Natural parameter AUTO=ON has been set), the user ID as contained in the Natural system variable *INIT-USER will be used to log on to the Natural session. In this case, the value of *INIT-USER must be identical to the value of the Natural system variable *USER. |
Action |
Either make sure that the values of *INIT-USER and *USER are identical for the logon; or log on with AUTO=OFF. |
Text |
This user is not defined. Restart not allowed. |
Explanation |
The last library of a user is stored in his/her security record. A user who has not been defined to Natural Security does not have such a record. Restart is only allowed for a user who is defined to Natural Security. However, you are not defined to Natural Security. |
Action |
Contact your Natural Security administrator. |
Text |
Command mode prohibited, no startup transaction specified. |
Explanation |
If command mode is not allowed, either a startup transaction must have been specified or a command/program must be in the Natural stack. |
Action |
Contact your Natural Security administrator. |
Text |
Group not found. |
Explanation |
You are linked via a group to the library, but the group cannot be found. |
Action |
Contact your Natural Security administrator. |
Text |
Library ID must start with an alphabetical character. |
Explanation |
The first character of a library ID must be an alphabetical character. |
Action |
Enter a library ID which starts with an alphabetical character. |
Text |
Startup transaction ... cannot be found. |
Explanation |
The startup transaction specified in the security profile of the used library cannot be found, neither in the library itself nor in any steplib. |
Action |
Contact your Natural Security administrator. |
Text |
A library with that ID already exists. |
Explanation |
User/library IDs must be unique. |
Action |
Enter a user ID which is not equal to any library ID. |