Natural System Error Messages 4600-4649

NAT4600: Multiple commands not allowed.

Text

Multiple commands not allowed.

Explanation

Only one command may be entered per screen.
If multiple commands are detected, no update and no command
interpretation are performed.

Action

Enter only one command.

NAT4601: Invalid screen operation in line :1:, column :2:.

Text

Invalid screen operation in line ..., column ....

Explanation

A field variable must not be changed to a text constant.

Action

Delete the field or move it to another position by using the
appropriate field command, then insert the text.

NAT4602: Use ".E" command to edit field.

Text

Use ".E" command to edit field.

Explanation

The modification or definition of an edit mask for a field is only
possible by invoking "extended field editing" with the command ".E".

Action

Use the field command ".E".

NAT4603: Error in DDM.

Text	Error in DDM.
Explanation	An error was detected in the currently used Data Definition Module.
Action	Correct the DDM.

NAT4604: Use edit mask to change format.

Text	Use edit mask to change format.
Action	Use edit mask to change format.

NAT4605: Use ".A" command to define array.

Text	Use ".A" command to define array.
Action	Enter the field command ".A" in the field.

NAT4606: Invalid object name.

Text	Invalid object name.
Action	Specify a valid object name.

NAT4607: No DDM loaded.

Text	No DDM loaded.
Explanation	An internal error occurred while trying to load a DDM.
Action	Contact Software AG - Natural support.

NAT4608: The requested DDM is too large.

Text	The requested DDM is too large.
Explanation	The requested DDM is too large to be processed by the map editor.
Action	Reduce the size of the DDM.

NAT4609: Invalid edit mask.

Text	Invalid edit mask.
Explanation	The edit mask specified is invalid. See the Natural documentation for detailed information on edit masks.
Action	Correct error.

NAT4610: Invalid field format.

Text	Invalid field format.
Explanation	The specified field format is invalid. See the Natural documentation for valid format definitions.
Action	Correct error.

NAT4611: Field name contains illegal characters.

Text	Field name contains illegal characters.
Explanation	The field name contains characters which are not allowed within a field name.
Action	Correct error.

NAT4612: Too many digits before and/or after decimal character.

Text

Too many digits before and/or after decimal character.

Explanation

There are too many decimal digits before and/or after the
decimal character.
See the Natural documentation for additional information.

Action

Correct error.

NAT4613: The source area is empty.

Text	The source area is empty.
Explanation	An attempt was made to edit an empty source area.
Action	Use function "I" (Initialize map) or "R" (Read map) to place a map into the source area.

NAT4614: Map not found in source area.

Text

Map not found in source area.

Explanation

The source area does not contain the map with the specified name.
Function "L" may be used to determine if a map is currently in the
source area; or the map-entry field may be left blank to cause all
maps in the source area to be displayed.

Action

Use function "I" (Initialize map) or "R" (Read map) to place a map
into the source area.

NAT4615: Specified object not found in current or steplib library.

Text

Specified object not found in current or steplib library.

Explanation

The Natural object (program, subprogram, data area, etc.) with the
specified name could not be found either in the current library or
in any concatenated library (steplib).

Action

Specify the correct name of the object.

NAT4616: Invalid use of a command.

Text	Invalid use of a command.
Explanation	An attempt was made to use a command incorrectly. (for example, using the command ".A" for a text constant.
Action	Enter correct command in correct field.

NAT4617: No delimiter matches attributes.

Text

No delimiter matches attributes.

Explanation

The specified attributes are not consistent with the delimiter settings
in the map profile.

Action

Use other attributes or change delimiter settings in the map profile.

NAT4618: Too many occurrences of field in line :1:, column :2:.

Text	Too many occurrences of field in line ..., column ....
Explanation	An output field was used in more than 98 occurrences.
Action	Specify a new field.

NAT4619: Multiple fields not allowed here: line :1:, column :2:.

Text	Multiple fields not allowed here: line ..., column ....
Explanation	An input-only field or a modifiable field must not be used in multiple occurrences.
Action	Correct error.

NAT4620: String too long: line :1:, column :2:.

Text

String too long: line ..., column ....

Explanation

A text constant of over 58 characters was specified.
Only text which consists of the repeated concatenation of the
same character may be longer than 58 characters.

Action

Divide the text into 2 constants or use a variable containing the text.

NAT4621: System variable must be an output field.

Text	System variable must be an output field.
Explanation	System variables may only used in output mode.
Action	Use a delimiter which indicates output mode.

NAT4622: Overlapping detected in line :1:, column :2:.

Text

Overlapping detected in line ..., column ....

Explanation

This error may be caused by any of the following:
  - overlapping of one variable with another;
  - overlapping of a variable with the right border of the map;
  - overlapping of a variable and a text constant;
  - an invalid command was interpreted as text.

Action

Correct error.

NAT4623: Type conflict with DDM definition: line :1:, column:2:.

Text

Type conflict with DDM definition: line ..., column....

Explanation

The DDM variable attribute is not assigned to the screen variable
attribute in the case of incompatible formats.
  Incompatible:    A,B with N,P.
                   A with B.
  Compatible  :    N with P.

Action

Change screen specification and then reassign.

NAT4624: Reassignment not possible in line :1:, column :2:.

Text

Reassignment not possible in line ..., column ....

Explanation

This error may be caused by the following:
- the variable is already assigned;
- the variable is a system variable.

Action

Delete the variable and generate it from the DDM.

NAT4625: Name of field/variable must be specified.

Text	Name of field/variable must be specified.
Action	Enter a field/variable name.

NAT4626: Internal format error in map definition.

Text

Internal format error in map definition.

Explanation

The map editor has detected an internal format error in the
map definition.
A possible cause is the attempt to edit the map source area
via another utility or program.

Action

Use function "I" (initialize map) or "R" (read map)
to place the original map into the source area.

NAT4627: AL/NL syntax error.

Text	AL/NL syntax error.
Explanation	The specification of AL or NL is incorrect. See the Natural documentation for detailed information.
Action	Specify AL/NL correctly.

NAT4628: You may select only one item from the menu.

Text	You may select only one item from the menu.
Action	Select no more than one item.

NAT4629: Not enough empty lines available for inserting/splitting.

Text

Not enough empty lines available for inserting/splitting.

Explanation

When you use the line commands "..I" (insert) or "..S" (split),
all lines below the inserted/split line(s) will be "pushed" downward
and the last empty line(s) of the map will be deleted to make room
for the insertion/splitting.
However, if there are not enough empty lines at the bottom of the map,
the insert/split command cannot be executed.

Action

Make sure that enough empty lines are available before you insert
new lines or split lines.

NAT4630: Invalid rank setting.

Text

Invalid rank setting.

Explanation

This error message may be caused by any of the following:
- The specified value was not greater than zero.
- The specified value was not smaller than or equal to the rank
  of the array.
- The specified value has already been assigned.
Note: The rank of an array is equal to the number of indexes;
      for example, A(3,4) is an element of array A with rank 2.

Action

Correct rank setting.

NAT4631: Index is out of range.

Text	Index is out of range.
Explanation	The specified index is outside the array dimensions.
Action	Correct the index specification.

NAT4632: Fixed index must be specified.

Text	Fixed index must be specified.
Explanation	If an array with 3 dimensions is used in a map, the index of at least one dimension must be fixed (integer or variable).
Action	Correct index specification.

NAT4633: Invalid color.

Text	Invalid color.
Explanation	An invalid color was specified. The valid color codes may be determined by placing the cursor on the field COLOUR and pressing the HELP key.
Action	Specify a valid color.

NAT4634: No source/object name specified.

Text	No source/object name specified.
Explanation	The source name is missing for a READ or PURGE function; or the object name is missing for the UNCATALOG function.
Action	Specify source/object name.

NAT4635: No profile name specified.

Text	No profile name specified.
Explanation	A profile name must be specified when using function "I" or "M".
Action	Specify a profile name.

NAT4636: Column shift can only be 0 or 1.

Text

Column shift can only be 0 or 1.

Explanation

The standard column shift is "0" .
In order to use the first column position for map fields,
a column shift of "1" may be specified.

Action

Specify "0" or "1" .

NAT4637: Conflict between helptext size/position and screen size.

Text

Conflict between helptext size/position and screen size.

Explanation

The currently defined size of the helptext window does not permit
its being placed in the position you want it to be placed, because
it would not fit onto the screen of the specified device ("Device
Check").
You have to make the window smaller, change its position (or not use
the Device Check option).

Action

Either make the helptext smaller (reduce page size and/or line size),
or change its position.

NAT4638: Map transmitted successfully.

Text	Map transmitted successfully.
Action	No action required.

NAT4639: Field/parameter names in a map must be unique.

Text	Field/parameter names in a map must be unique.
Explanation	The names of fields and parameters used in a map must be unique.
Action	Do not use duplicate field/parameter names in a map.

NAT4640: SAVE command executed.

Text	SAVE command executed.
Explanation	The source has been stored in the current library.
Action	No action required.

NAT4641: Map tested successfully.

Text	Map tested successfully.
Explanation	A RUN command was executed successfully for the current source.
Action	No action required.

NAT4642: Variable already used with other format/array dimensions.

Text

Variable already used with other format/array dimensions.

Explanation

The variable whose name you have specified as help parameter,
attribute control variable or starting-from value has already
been defined elsewhere with a different format or with other
array dimensions.

Action

Use a different name or check the other variable of the same name.

NAT4643: Invalid function code.

Text	Invalid function code.
Explanation	The specified function code is invalid.
Action	Enter a valid function code, or a "?" for help.

NAT4644: Delimiter class must be "A","O","M" or "T".

Text

Delimiter class must be "A","O","M" or "T".

Explanation

An invalid code for the delimiter class was entered.
Possible codes are:
  A  - Input-only field
  O  - Output-only field
  M  - Modifiable field (output and input)
  T  - Text constant

Action

Enter valid delimiter class.

NAT4645: Attribute of delimiter is invalid.

Text

Attribute of delimiter is invalid.

Explanation

Valid attribute codes are:
  B  Blinking                          NE  Neutral
  C  Cursive/italic                    BL  Blue
  D  Default (non-I, B, etc.)          GR  Green
  I  Intensified                       RE  Red
  N  Non-display                       PI  Pink
  U  Underlined                        YE  Yellow
  V  Reversed video                    TU  Turquoise
  Y  Dynamic (attributes to be
     assigned dynamically by
     user program)

Action

Enter valid code.

NAT4646: Delimiter must be a special character.

Text	Delimiter must be a special character.
Explanation	Only special characters may be used as delimiters.
Action	Enter a special character as delimiter.

NAT4647: Page size must be 1 - 250.

Text	Page size must be 1 - 250.
Explanation	The page size value must be in the range from 1 to 250 lines. The standard page size for 3270-type screens is 23 lines.
Action	Enter a valid page size.

NAT4648: Line size must be 5 - 249.

Text

Line size must be 5 - 249.

Explanation

The line size value must be in the range from 5 to 249 characters.
The standard line size for a 3270-type screen is 79 characters.

Action

Enter a valid line size.

NAT4649: Enter "T" (top) or "B" (bottom).

Text	Enter "T" (top) or "B" (bottom).
Explanation	The message line may be located at the top (T) or the bottom (B) of the screen.
Action	Enter valid code ("T" or "B").