This document covers various aspects concerning the handling of date information in Natural applications.
The following topics are covered:
If you wish the value of a date field to be output in a specific representation, you usually specify an edit mask for the field. With an edit mask, you determine character by character what the output is to look like.
If you wish to use the current date in a specific representation, you need not define a date field and specify an edit mask for it; instead you can simply use a date system variable. Natural provides various date system variables, which contain the current date in different representations. Some of these representations contain a 2-digit year component, some a 4-digit year component.
For more information and a list of all date system variables, see the System Variables documentation.
The profile parameter DTFORM
determines
the default format used for dates as part of the default title on Natural
reports, for date constants and for date input.
This date format determines the sequence of the day, month and year components of a date, as well as the delimiter characters to be used between these components.
Possible DTFORM
settings are:
Setting | Date Format* | Example |
---|---|---|
DTFORM=I
|
yyyy-mm-dd
|
2005-12-31 |
DTFORM=G
|
dd.mm.yyyy
|
31.12.2005 |
DTFORM=E
|
dd/mm/yyyy
|
31/12/2005 |
DTFORM=U
|
mm/dd/yyyy
|
12/31/2005 |
* dd
= day,
mm
= month,
yyyy
= year.
The DTFORM
parameter can be set in the
Natural parameter module/file or dynamically when Natural is invoked. By
default, DTFORM=I
applies.
If an edit mask is specified, the representation of the field value
is determined by the edit mask. If no edit mask is specified, the
representation of the field value is determined by the session parameter
DF
in
combination with the profile parameter DTFORM
.
With the DF
parameter, you can choose one of
the following date representations:
For each representation, the sequence of the day, month and year
components, and the delimiter characters used, are determined by the
DTFORM
parameter.
By default, DF=S
applies (except for INPUT
statements; see below).
The session parameter DF
is evaluated at
compilation.
It can be specified with the following statements:
INPUT
,
DISPLAY
,
WRITE
and
PRINT
at statement
and element (field) level,
MOVE
,
COMPRESS
,
STACK
,
RUN
and
FETCH
at element
(field) level.
When specified in one of these statements, the
DF
parameter applies to the following:
Statement | Effect of DF parameter |
---|---|
DISPLAY ,
WRITE ,
PRINT
|
When the value of a date variable is output with one of
these statements, the value is converted to an alphanumeric representation
before it is output. The DF parameter determines which
representation is used.
|
MOVE ,
COMPRESS
|
When the value of a date variable is transferred to an
alphanumeric field with a MOVE or COMPRESS statement,
the value is converted to an alphanumeric representation before it is
transferred. The DF parameter determines which
representation is used.
|
STACK ,
RUN ,
FETCH
|
When the value of a date variable is placed on the
stack, it is converted to alphanumeric representation before it is placed on
the stack. The DF parameter determines which representation is
used.
The same applies when a date variable is specified as a
parameter in a |
INPUT
|
When a data variable is used in an INPUT
statement, the DF parameter determines how a value must
be entered in the field.
However, when a date variable for which no
|
Note:
With DF=S
, only 2 digits are provided for the year
information; this means that if a date value contained the century, this
information would be lost during the conversion. To retain the century
information, you set DF=I
or DF=L
.
These examples assume that DTFORM=G
applies.
/* DF=S (default) WRITE *DATX /* Output has this format: dd.mm.yy END
FORMAT DF=I WRITE *DATX /* Output has this format: ddmmyyyy END
FORMAT DF=L WRITE *DATX /* Output has this format: dd.mm.yyyy END
This example assumes that DTFORM=E
applies.
DEFINE DATA LOCAL 1 #DATE (D) INIT <D'31/12/2005'> 1 #ALPHA (A10) END-DEFINE ... MOVE #DATE TO #ALPHA /* Result: #ALPHA contains 31/12/05 MOVE #DATE (DF=I) TO #ALPHA /* Result: #ALPHA contains 31122005 MOVE #DATE (DF=L) TO #ALPHA /* Result: #ALPHA contains 31/12/2005 ...
This example assumes that DTFORM=I
applies.
DEFINE DATA LOCAL 1 #DATE (D) INIT <D'2005-12-31'> 1 #ALPHA1(A10) 1 #ALPHA2(A10) 1 #ALPHA3(A10) END-DEFINE ... STACK TOP DATA #DATE (DF=S) #DATE (DF=I) #DATE (DF=L) ... INPUT #ALPHA1 #ALPHA2 #ALPHA3 ... /* Result: #ALPHA1 contains 05-12-31 /* #ALPHA2 contains 20051231 /* #ALPHA3 contains 2005-12-31 ...
This example assumes that DTFORM=I
applies.
DEFINE DATA LOCAL 1 #DATE1 (D) 1 #DATE2 (D) 1 #DATE3 (D) 1 #DATE4 (D) END-DEFINE ... INPUT #DATE1 (DF=S) /* Input must have this format: yy-mm-dd #DATE2 (DF=I) /* Input must have this format: yyyymmdd #DATE3 (DF=L) /* Input must have this format: yyyy-mm-dd #DATE4 /* Input must have this format: yy-mm-dd or yyyymmdd ...
The session/profile parameter DFOUT
only applies
to date fields in INPUT
,
DISPLAY
,
WRITE
and
PRINT
statements for
which no edit mask is specified, and for which no
DF
parameter applies.
For date fields which are displayed by INPUT
,
DISPLAY
, PRINT
and WRITE
statements and
for which neither an edit mask is specified nor a DF
parameter applies, the profile/session parameter DFOUT
determines the format in which the field values are displayed.
Possible DFOUT
settings are:
DFOUT=S |
Date variables are displayed with a 2-digit year
component, and delimiters as determined by the DTFORM
parameter (yy-mm-dd ).
|
DFOUT=I |
Date variables are displayed with a 4-digit year
component and no delimiters
(yyyymmdd ).
|
By default, DFOUT=S
applies. For either
DFOUT
setting, the sequence of the day, month and year
components in the date values is determined by the
DTFORM
parameter.
The lengths of the date fields are not affected by the
DFOUT
setting, as either date value representation fits
into an 8-byte field.
The DFOUT
parameter can be set in the Natural
parameter module/file, dynamically when Natural is invoked, or at session
level. It is evaluated at runtime.
This example assumes that DTFORM=I
applies.
DEFINE DATA LOCAL 1 #DATE (D) INIT <D'2005-12-31'> END-DEFINE ... WRITE #DATE /* Output if DFOUT=S is set ...: 05-12-31 /* Output if DFOUT=I is set ...: 20051231 WRITE #DATE (DF=L) /* Output (regardless of DFOUT): 2005-12-31 ...
The session/profile parameter DFSTACK
only
applies to date fields used in STACK
,
FETCH
and
RUN
statements for which
no DF
parameter has been specified.
The DFSTACK
parameter determines the format
in which the values of date variables are placed on the stack via a
STACK
, RUN
or FETCH
statement.
Possible DFSTACK
settings are:
By default, DFSTACK=S
applies. DFSTACK=S
means that when a date value is placed on the stack, it is placed there without
the century information (which is lost). When the value is then read from the
stack and placed into another date variable, the century is either assumed to
be the current one or determined by the setting of the
YSLW
parameter (see below). This
might lead to the century being different from that of the original date value;
however, Natural would not issue any error in this case.
DFSTACK=C
works the same as
DFSTACK=S
in that a date value is placed on the stack
without the century information. However, if the value is read from the stack
and the resulting century is different from that of the original date value
(either because of the YSLW
parameter, or the original
century not being the current one), Natural issues a runtime error.
Note:
This runtime error is already issued at the time when the value
is placed on the stack.
DFSTACK=I
allows you to place a date value on the stack
in a length of 8 bytes without losing the century information.
The DFSTACK
parameter can be set in the
Natural parameter module/file, dynamically when Natural is invoked, or at
session level . It is evaluated at runtime.
This example assumes that DTFORM=I
and
YSLW=0
apply.
DEFINE DATA LOCAL 1 #DATE (D) INIT <D'2005-12-31'> 1 #ALPHA1(A8) 1 #ALPHA2(A10) END-DEFINE ... STACK TOP DATA #DATE #DATE (DF=L) ... INPUT #ALPHA1 #ALPHA2 ... /* Result if DFSTACK=S or =C is set: #ALPHA1 contains 05-12-31 /* Result if DFSTACK=I is set .....: #ALPHA1 contains 20051231 /* Result (regardless of DFSTACK) .: #ALPHA2 contains 2005-12-31 ...
The profile parameter YSLW
allows you
determine the century of a 2-digit year value.
The YSLW
parameter can be set in the Natural
parameter module/file or dynamically when Natural is invoked. It is evaluated
at runtime when an alphanumeric date value with a 2-digit year component is
moved into a date variable. This applies to data values which are:
used with the mathematical function
VAL(field)
,
used with the IS(D)
option in a logical
condition,
read from the stack as input data, or
entered in an input field as input data.
The YSLW
parameter determines the range of
years covered by a so-called "year sliding window". The
sliding-window mechanism assumes a date with a 2-digit year to be within a
"window" of 100 years. Within these 100 years, every 2-digit year
value can be uniquely related to a specific century.
With the YSLW
parameter, you determine how
many years in the past that 100-year range is to begin: The
YSLW
value is subtracted from the current year to
determine the first year of the window range.
Possible values of the YSLW
parameter are 0
to 99. The default value is YSLW=0
, which means that no
sliding-window mechanism is used; that is, a date with a 2-digit year is
assumed to be in the current century.
If the current year is 2005 and you specify
YSLW=40
, the sliding window will cover the years 1965 to
2064. A 2-digit year value nn from 65 to 99 is
interpreted accordingly as 19nn, while a 2-digit
year value nn from 00 to 64 is interpreted as
20nn.
If the current year is 2005 and you specify YSLW=20
,
the sliding window will cover the years 1985 to 2084. A 2-digit year value
nn from 85 to 99 is interpreted accordingly as
19nn, while a 2-digit year value
nn from 00 to 84 is interpreted as
20nn.
The following examples illustrate the effects of using various
combinations of the parameters DFSTACK
and
YSLW
.
Note:
All these examples assume that DTFORM=I
applies.
This example assumes the current year to be 2005, and that the
parameter settings DFSTACK=S
(default) and
YSLW=20
apply.
DEFINE DATA LOCAL 1 #DATE1 (D) INIT <D'1956-12-31'> 1 #DATE2 (D) END-DEFINE ... STACK TOP DATA #DATE1 /* century information is lost (year 56 is stacked) ... INPUT #DATE2 /* year sliding window determines 56 to be 2056 ... /* Result: #DATE2 contains 2056-12-31 even if #DATE1 is set to <D'2156-12-31'>
In this case, the year sliding window is not set appropriately, so that the century information is (inadvertently) changed.
This example assumes the current year to be 2005, and that the
parameter settings DFSTACK=S
(default) and
YSLW=60
apply.
DEFINE DATA LOCAL 1 #DATE1 (D) INIT <D'1956-12-31'> 1 #DATE2 (D) END-DEFINE ... STACK TOP DATA #DATE1 /* century information is lost (year 56 is stacked) ... INPUT #DATE2 /* year sliding window determines 56 to be 1956 ... /* Result: #DATE2 contains 1956-12-31 even if #DATE1 is set to <D'2056-12-31'>
In this case, the year sliding window is set appropriately, so that the original century information is correctly restored.
This example assumes the current year to be 2005, and that the
parameter settings DFSTACK=C
and
YSLW=0
(default) apply.
DEFINE DATA LOCAL 1 #DATE1 (D) INIT <D'1956-12-31'> 1 #DATE2 (D) END-DEFINE ... STACK TOP DATA #DATE1 /* century information is lost (year 56 is stacked) ... INPUT #DATE2 /* 56 is assumed to be in current century -> 1956 ... /* Result: RUNTIME ERROR (UNINTENDED CENTURY CHANGE)
In this case, the century information is (inadvertently) changed.
However, this change is intercepted by the DFSTACK=C
setting.
This example assumes the current year to be 2005, and that the
parameter settings DFSTACK=C
and YSLW=60
(default) apply.
DEFINE DATA LOCAL 1 #DATE1 (D) INIT <D'2056-12-31'> 1 #DATE2 (D) END-DEFINE ... STACK TOP DATA #DATE1 /* century information is lost (year 56 is stacked) ... INPUT #DATE2 /* year sliding window determines 56 to be 1956 ... /* Result: RUNTIME ERROR (UNINTENDED CENTURY CHANGE)
In this case, the century information is changed due to the year
sliding window. However, this change is intercepted by the
DFSTACK=C
setting.
For information on this topic, see the description of the profile
parameter YSLW
.
The session/profile parameter DFTITLE
determines
the format of the date in a default page
title (as output with a DISPLAY
,
WRITE
or
PRINT
statement).
DFTITLE=S
|
The date is output with a 2-digit year component and
delimiters (yy-mm-dd ).
|
DFTITLE=L
|
The date is output with a 4-digit year component and
delimiters (yyyy-mm-dd ).
|
DFTITLE=I |
The date is output with a 4-digit year component and no
delimiters (yyyymmdd ).
|
For each of these output formats, the sequence of the day, month and
year components, and the delimiter characters used, are determined by the
DTFORM
parameter.
The DFTITLE
parameter can be set in the
Natural parameter module/file, dynamically when Natural is invoked, or at
session level. It is evaluated at runtime.
This example assumes that DTFORM=I
applies.
WRITE 'HELLO' END /* /* Date in page title if DFTITLE=S is set ...: 05-10-31 /* Date in page title if DFTITLE=L is set ...: 2005-10-31 /* Date in page title if DFTITLE=I is set ...: 20051031
Note:
The DFTITLE
parameter
has no effect on a user-defined page title as specified with a
WRITE
TITLE
statement.