Natural System Error Messages 7651-7700

Text

Connect to server ... port ... failed; socket code ....

Explanation

A connection to the development server failed due to one of the
following reasons:
- A wrong development server name was specified.
- The specified port ID does not match the port where the
  development server is listening.
- The development server is not active.
- The server machine hosting the development server is not active.

Action

Check that the specified name matches the development server name,
the development server is active, its port matches the specified port,
and the server machine is accessible (e.g. via 'ping' command).

Text

Protocol mismatch of Server Nat ... (...) and Nat Studio (...)

Explanation

The protocol versions of the Natural Development Server and the
Natural Studio do not match. Although the Natural Studio can run
with servers using an older or newer version of the protocol,
some functionality might not or only partly be supported.

Action

Upgrade the Natural Development Server or the Natural Studio.

Text

Development server file for application ... not unique.

Explanation

The specified development server file differs from the active
development server file. All mapped applications have to use
one common development server file.

Action

Change the development server file for the current application.

Text

Connection to NDV server lost or network failure.

Explanation

The remote Natural session or the Natural Development Server (NDV) has
terminated abnormally, or a network failure has occurred.
-
Examine the NDV trace output for information on the connection
termination. If NDV trace contains no such information, contact your
network administrator.
Try to remap the session to the server.
-
If the problem persists, check in the NDV server trace whether your
buffer has arrived:
- If data have arrived, check for error information in subsequent
  trace records.
- If no data have arrived, contact your network administrator.

Action

See explanation above.

Text

Command not applicable within the current context.

Explanation

The issued command cannot be executed in the selected remote
environment or application context.

Possible reasons are:
 - The command is not available for the selected environment
   or application; e.g. the command 'Connect' is issued for
   a compound application.
 - The command is not available for the current state of the
   selected environment or application; e.g. the command
   'Activate' is issued for a disconnected environment, although only
   connected environments can be activated.

Action

Check whether all conditions for issuing the command are fulfilled.

Text

Command not supported by Natural Development Server.

Explanation

The issued command is not supported by the protocol version
of the Natural Development Server.

Action

Upgrade the Natural Development Server.

Text

Invalid value specified.

Explanation

The value which has been assigned to a property or was specified
as method parameter is not allowed in this context.

Action

Assign a valid attribute value, or use a valid method parameter.

Text

Natural ... cannot be used to access NDV server.

Explanation

This Natural version is not capable of using the
requested NDV server.

Action

Upgrade Natural Studio.

Text

Environment name ... already exists.

Explanation

The specified environment name is already used either
by another mapped environment or by a mapped application.

Action

Use a different name for the environment to be mapped.

Text

Function not available, because ... is not installed.

Explanation

The required component must be installed in order to perform the
function specified or to process the object specified.

Action

Install component, or do not use this function.

Text

Remote Debug could not be started.

Explanation

An internal error occurred which prevented the session for
Remote Debug from being started. For details see the NDV trace,
at least trace-level bit 15 should be activated.

Action

Contact Software AG support.

Text

Internal error during Remote Debug, terminating.

Explanation

The connection to Remote Debug could not be maintained because of
internal errors. For details see the NDV trace, at least trace-level
bit 15 should be activated.

Action

Contact Software AG support.

Text

Parameter error in MAP/UNMAP command.

Explanation

The MAP/UNMAP command cannot be performed, because the specified
parameters are not correct.
Possible errors are, for example:
- Mandatory parameters of the MAP command are missing (for APPL=
  at least the application name has to be specified; for ENV= at least
  the server name and the port number have to be specified).
- No parameters are specified for the UNMAP command, but the local
  environment is active.
- The application/environment specified in the UNMAP command cannot
  be found.

See the Natural system commands documentation for further information.

Action

Correct the parameter specification.

Text

The debugger port is already in use.

Explanation

The debugger port specified via the SPODDEBUGPORT parameter is already
used by a different program. Therefore the remote connection to the
Natural application could not be established.

Action

Set the SPODDEBUGPORT parameter to a different value.
Or set the SPODDEBUGPORT parameter to 0; Natural Studio will then
automatically select a free port on the machine for debugging.

Text

... locked by ....

Explanation

No detailed explanation available.