Natural System Error Messages 3151-3200

NAT3151: A command queue overflow occurred. DB/FNR :1:/:2:.

Text

A command queue overflow occurred. DB/FNR .../....

Explanation

The database administrator may increase the value for the NC parameter,
and/or the command may be issued when a lower level of command activity
is in effect.

Action

Contact your database administrator.

NAT3152: Internal user buffer too small. DB/FNR :1:/:2:.

Text

Internal user buffer too small. DB/FNR .../....

Explanation

The internal user buffer was not large enough to contain the user
buffer areas. The database administrator should increase the value
of the LU parameter.

Action

Contact your database administrator.

NAT3153: Previous Adabas call still in process. DB/FNR :1:/:2:.

Text

Previous Adabas call still in process. DB/FNR .../....

Explanation

A 'CALL Adabas' was issued by a user while a previous call for
the user was still being processed.

Action

Contact your database administrator.

NAT3154: Adabas call has been cancelled. DB/FNR :1:/:2:.

Text	Adabas call has been cancelled by the user. DB/FNR .../....
Action	No action required.

NAT3160: Too many ASSO/DATA blocks active in buffer pool. DB/FNR :1:/:2:.

Text

Too many ASSO/DATA blocks active in buffer pool. DB/FNR .../....

Explanation

Too many Associator and Data Storage blocks were marked as
active in the Adabas buffer pool for a single command.

Action

Contact your database administrator.

NAT3161: Invalid RABN chain in header list. DB/FNR :1:/:2:.

Text	Invalid RABN chain in header list. DB/FNR .../....
Explanation	The RABN chain in the header list of the Adabas buffer pool was invalid.
Action	Contact your database administrator.

NAT3162: No space for Adabas buffer pool header blocks. DB/FNR :1:/:2:.

Text	No space for Adabas buffer pool header blocks. DB/FNR .../....
Explanation	No additional space was available for Adabas buffer pool header blocks.
Action	Contact your database administrator.

NAT3163: RABN was already in chain. DB/FNR :1:/:2:.

Text	RABN was already in chain. DB/FNR .../....
Explanation	The RABN to be linked into the RABN header chain was already in the chain.
Action	Contact your database administrator.

NAT3164: Too many work areas allocated for command. DB/FNR :1:/:2:.

Text	Too many work areas allocated for command. DB/FNR .../....
Action	Contact your database administrator.

NAT3165: Descriptor invalid or non-existent. DB/FNR :1:/:2:.

Text

Descriptor invalid or non-existent. DB/FNR .../....

Explanation

A descriptor name was either invalid or did not exist in the
Descriptor Value Table.

Action

Check program and correct error, or contact your database administrator.

NAT3166: Error detected in inverted list index. DB/FNR :1:/:2:.

Text

Error detected in inverted list index. DB/FNR .../....

Explanation

An error was detected in an inverted list index; a descriptor
value was not found during a delete operation.
o  Locate the descriptor that caused the error in the
   additions 2 field of the user control block.
o  Run the VERIFY option of ADAINV for this descriptor and save
   the output.
o  Reinvert the descriptor.
o  If necessary, restart the database (if this is possible).
o  Send the  following  information  to  your  nearest  support
   centre:
   -  the output of the VERIFY option of ADAINV;
   -  all available PLOGs;
   -  the FDT of the file containing the error;
   -  if the nucleus crashed, the crash directory.

Action

See explanation.

NAT3167: Error detected in inverted list index. DB/FNR :1:/:2:.

Text

Error detected in inverted list index. DB/FNR .../....

Explanation

An error was detected in an inverted list index; a descriptor
value was already present during an insert operation.
o  Locate the descriptor that caused the error in the
   additions 2 field of the user control block.
o  Run the VERIFY option of ADAINV for this descriptor and save
   the output.
o  Reinvert the descriptor.
o  If necessary, restart the database (if this is possible).
o  Send the following information to your nearest support
   centre:
   -  the output of the VERIFY option of ADAINV;
   -  all available PLOGs;
   -  the FDT of the file containing the error;
   -  if the nucleus crashed, the crash directory.

Action

See explanation.

NAT3168: Internal CID for coupling processing not found. DB/FNR :1:/:2:.

Text	Internal CID for coupling processing not found. DB/FNR .../....
Explanation	An internal 'CID' required during coupling processing was not found.
Action	Contact your database administrator.

NAT3170: Adabas RABN for the command not found. DB/FNR :1:/:2:.

Text	Adabas RABN for the command not found. DB/FNR .../....
Explanation	The Adabas RABN required for the command could not be found.
Action	Contact your database administrator.

NAT3171: Constant set used by Adabas not found. DB/FNR :1:/:2:.

Text	Constant set used by Adabas not found. DB/FNR .../....
Action	Contact your database administrator.

NAT3172: ISN less than MINISN or greater than MAXISN. DB/FNR :1:/:2:.

Text

ISN less than MINISN or greater than MAXISN. DB/FNR .../....

Explanation

An ISN was either less than the MINISN setting or greater than the
MAXISN setting in effect for the file.

Action

Check program and correct error, or contact your database administrator.

NAT3173: An invalid data storage RABN was detected. DB/FNR :1:/:2:.

Text	An invalid data storage RABN was detected. DB/FNR .../....
Action	Contact your database administrator.

NAT3174: Starting RABN for L2/L5 not in address converter. DB/FNR :1:/:2:.

Text

Starting RABN for L2/L5 not in address converter. DB/FNR .../....

Explanation

The starting data storage RABN for an L2/L5 command was not
contained in the address converter for the file.

Action

Check program and correct error, or contact your database administrator.

NAT3176: Error in call to Adabas subroutine/inverted list. DB/FNR :1:/:2:.

Text

Error in call to Adabas subroutine/inverted list. DB/FNR .../....

Explanation

An incorrect call to an Adabas subroutine or an inconsistency in
an inverted list was detected.

Action

Check program and correct error, or contact your database administrator.

NAT3177: Record not found in indicated DATA storage block. DB/FNR :1:/:2:.

Text

Record not found in indicated DATA Storage block. DB/FNR .../....

Explanation

A record could not be found in the Data Storage block which should
have contained it as indicated by the Address Converter.

Action

Contact your database administrator.

NAT3178: FDT and internal format buffer not consistent. DB/FNR :1:/:2:.

Text

FDT and internal format buffer not consistent. DB/FNR .../....

Explanation

An inconsistency was detected between the Field Description Table (FDT)
and the internal format buffer;
or an internal occurred when updating a multiple-value field.

Action

Contact your database administrator.

NAT3181: Start of transaction not found on autobackout. DB/FNR :1:/:2:.

Text

Start of transaction not found on autobackout. DB/FNR .../....

Explanation

The start of a transaction could not be found when an
'autobackout' was executed.

Action

Check program and correct error, or contact your database administrator.

NAT3182: Necessary ET data not found in WORK block. DB/FNR :1:/:2:.

Text	Necessary ET data not found in WORK block. DB/FNR .../....
Explanation	The necessary ET data were not found in the appropriate WORK block.
Action	Correct error or contact your database administrator.

NAT3183: Internal no. for database I/O operation invalid. DB/FNR :1:/:2:

Text

Internal no. for database I/O operation invalid. DB/FNR .../...

Explanation

An internally assigned number for a database I/O operation was
found to be invalid.

Action

Contact your database administrator.

NAT3184: A phonetic field name could not be found. DB/FNR :1:/:2:.

Text	A phonetic field name could not be found. DB/FNR .../....
Action	Check program and correct error, or contact your database administrator.

NAT3185: ADAM field not found in compressed record. DB/FNR :1:/:2:.

Text	ADAM field not found in compressed record. DB/FNR .../....
Action	Contact your database administrator.

NAT3196: Referential integrity violated (DB/FNR/sub/con :1:/:2:/:3:/:4:).

Text

Referential integrity violated (DB/FNR/sub/con .../.../.../...).

Explanation

The command has been rejected by Adabas.
Referential integrity has been violated. The error message shows
the database ID, file number, subcode and constraint name of the
violated constraint.

Action

Handle the referential integrity violation;
for example, by issuing an appropriate error message.

NAT3197: Pool for unique descriptor values too small. DB/FNR :1:/:2:.

Text	Pool for unique descriptor values too small. DB/FNR .../....
Action	Contact your database administrator.

NAT3198: Value for unique descriptor already exists. DB/FNR :1:/:2:.

Text

Value for unique descriptor already exists. DB/FNR .../....

Explanation

An attempt was made to duplicate a value for a unique descriptor.

Action

Check program and correct error, or contact your database administrator.

NAT3199: Inconsistency in inverted list index. DB/FNR :1:/:2:.

Text	Inconsistency in inverted list index. DB/FNR .../....
Explanation	During an UPDATE opertion, an inconsistency was detected in an inverted list index.
Action	Contact your database administrator.

NAT3200: Security violation or invalid cipher code. DB/FNR :1:/:2:.

Text	Security violation or invalid cipher code. DB/FNR .../....
Action	Check program and correct error, or contact your database administrator.