Text |
ESY5650 Invalid sequential file. |
Expl. |
The requested sequential file does not exist. |
Actn. |
Check file name, and re-run program. |
Text |
ESY5651 Requested catalog does not exist. |
Expl. |
The requested CVOL does not exist. |
Actn. |
Specify valid CVOL. |
Text |
ESY5652 Catalog structure inconsistent. |
Expl. |
The catalog structure is inconsistent. |
Actn. |
Notify the systems programmer. |
Text |
ESY5653 Cannot delete index. |
Expl. |
The index cannot be deleted. |
Actn. |
No action is required. |
Text |
ESY5654 Index structure does not exist. |
Actn. |
No action is required. |
Text |
ESY5655 Insufficient space on catalog data set. |
Expl. |
The catalog data set is full. |
Actn. |
Notify the systems programmer. |
Text |
ESY5656 Error cataloging generation data set. |
Expl. |
An error occurred while cataloging a generation data set. |
Actn. |
Check specified values; if valid, contact the systems programmer. |
Text |
ESY5657 I/O error on catalog. |
Expl. |
An I/O error occurred while accessing the catalog. |
Actn. |
This is probably a hardware error. Contact the systems programmer. |
Text |
ESY5658 Data set is not catalogued. |
Expl. |
The specified data set is not catalogued. |
Actn. |
No action is required. |
Text |
ESY5659 Data set is already catalogued. |
Expl. |
The specified data set is already catalogued. |
Actn. |
No action is required. |
Text |
ESY5660 ... - ... module not available. |
Expl. |
The specified Natural module was not found. |
Actn. |
Specify the name of an existing Natural module. |
Text |
ESY5661 ... - Natural sub-task already active. |
Expl. |
A Natural subtask is already active for this user. |
Actn. |
Make sure that subtask is closed prior restarting it. |
Text |
ESY5662 ... - Natural sub-task not allowed. |
Expl. |
The Natural subtask system has not been initialized. |
Actn. |
Notify systems programmer. |
Text |
ESY5663 ... - Natural sub-task not active. |
Expl. |
The Natural subtask does not exist. |
Actn. |
No action is required. |
Text |
ESY5664 ... - Natural sub-task table full. |
Expl. |
The maximum number of Natural subtasks is reached. |
Actn. |
Notify systems programmer. |
Text |
ESY5665 ... - invalid action requested. |
Expl. |
An invalid action was requested. |
Actn. |
Specify valid action. |
Text |
ESY5666 ... - Natural sub-task must have parameters. |
Expl. |
An attempt was made to start a Natural subtask without parameters. |
Actn. |
Specify parameter for Natural subtask. |
Text |
ESY5669 :1:. |
Expl. |
An error occurred during a SPOOL-UPDATE request. The error message text generally is a POWER error message returned by the internally generated PALTER command. |
Actn. |
Check operands for validity and consistency and resubmit. |
Text |
ESY5670 View not supported. |
Expl. |
This view is not supported on the local operating system. |
Text |
ESY5671 Class missing or is invalid. |
Expl. |
The function CHANGE requires a valid NEW-CLASS, NEW-DESTINATION or NEW-USERID value. |
Text |
ESY5672 Segment option requires JOBNAME/JOBNUMBER. |
Expl. |
Specifying the SEGMENT option (SEGMENT-NUMBER>0) requires that the job is identified with JOB-NAME and JOB-NUMBER. |
Text |
ESY5673 Access error due to FILETABLE=STATIC. |
Expl. |
The requested file could not be accessed because the Entire System Server startup parameter FILETABLE was specified as STATIC. Only those files available at NPR initialization time (STD,PARSTD & TEMP labels) can therefore be accessed. |
Actn. |
To allow dynamic access of files NOT specified at NPR initialization time, change the FILETABLE parameter to DYNAMIC and restart Entire System Server. |
Text |
ESY5674 VTOC error reading format-3 labels. |
Expl. |
VTOC error reading format-3 labels for the requested file. |
Actn. |
Information message only. No action necessary or possible. |
Text |
ESY5675 ... not supported. |
Expl. |
Entire System Server has detected that the requested file has attributes which are not supported by this version of Entire System Server, e.g. multi-volume files, multi-extent output files etc. |
Text |
ESY5676 Not first volume of a multi-volume file. |
Expl. |
Entire System Server has detected that the file on the specified volume is NOT the first volume/extent of a multi-volume file. |
Expl. |
A FAMS error occurred while COPY-FILE was copying one or more program objects. |
Actn. |
Check the console log for IGW prefixed messages issued by FAMS for further information |
Text |
ESY5678 Member already exists. |
Expl. |
In WRITE-FILE or COPY-FILE, REPLACE = "NO" was specified, however the member exists. |
Actn. |
No action required. |
Text |
ESY5679 Input and output files are incompatible. |
Expl. |
COPY-FILE has determined that the record formats of the input and output files are not compatible (RECFM does not match, block size incompatibilities, etc.). |
Actn. |
Verify data set attributes and reissue request with correct parameters. |
Text |
ESY5680 Job/output is protected. |
Expl. |
The user is not authorized to access the specified job/output. |
Actn. |
Notify systems programmer. |
Text |
ESY5681 Job/output is active. |
Expl. |
The specified job/output is currently active. |
Actn. |
There is no action required. |
Text |
ESY5682 Job/output is not dispatchable. |
Expl. |
The job/output is not dispatchable. |
Actn. |
There is no action required. |
Text |
ESY5683 FAMS error, R15=..., R0=.... |
Expl. |
A FAMS error occurred while COPY-FILE was copying one or more program objects. |
Actn. |
Check the console log for IGW prefixed messages issued by FAMS for further information. |
Text |
ESY5684 Remote program object copy currently unsupported. |
Expl. |
In this release of Entire System Server, use of COPY-FILE on OS/390 for copying program objects between different nodes is not supported. This message is also issued if a program object copy request is issued to a VSE/ESA node. |
Actn. |
A workaround is to first copy the program object to a PDS on the local node, then copy to a PDS on the remote node, then copy to the target PDSE. |
Text |
Unload data not processed, I/O exit not active. |
Expl. |
PDSE unload data could not be processed because the FAMS I/O exit was not active. The ERROR-NODE and ERROR-VIEW fields will show which node and which view encountered the error. More information like FAMS error messages (IGW01nnnt) may be found in the job log. |
Actn. |
Contact Software AG support. |
Text |
ESY5687 Bad variable record. |
Expl. |
Bad variable record. |
Actn. |
No action is required. |
Text |
ESY5688 Return code ... HCF function .... |
Expl. |
The HCF function failed. The return code is the HCF return code. |
Actn. |
Notify systems programmer. |
Text |
ESY5690 ... error ... during .... |
Expl. |
An error occurred accessing PANVALET or LIBRARIAN data. |
Actn. |
Notify systems programmer. |
Text |
ESY5691 Error while accessing librarian member. |
Expl. |
An error occurred accessing a LIBRARIAN member. |
Actn. |
There is no action required. |
Text |
ESY5692 You are not permitted to access member. |
Expl. |
This user is not authorized to access the specified member. |
Actn. |
Check with systems programmer. |
Text |
ESY5693 .... |
Expl. |
A PANVALET error occurred. |
Actn. |
See message text. |
Text |
ESY5694 Strange error opening VTOC. |
Expl. |
A strange internal error occurred reading the VTOC. |
Actn. |
Notify systems programmer. |
Text |
ESY5695 VTOC is in use. |
Expl. |
The VTOC is currently in use. |
Actn. |
Retry. |
Text |
ESY5696 Cannot assign logical unit. |
Expl. |
A logical unit could not be assigned. |
Actn. |
Notify systems programmer. |
Text |
ESY5697 Library/sublibrary not found. |
Expl. |
The specified library/sublibrary was not found. |
Actn. |
Specify valid library/sublibrary name. |
Text |
ESY5698 Internal LIBRARIAN error has occurred. |
Expl. |
An internal LIBRARIAN error occurred. |
Actn. |
Notify systems programmer. |
Text |
ESY5699 Not enough main storage available. |
Expl. |
Not enough main storage was available to process the request. |
Actn. |
Notify systems programmer. |