Natural System Error Messages 0600-0649

NAT0600: "END-IF" missing for IF statement in line :1:.

Text
"END-IF" missing for IF statement in line ....
Expl.
In structured mode, an IF statement block must be terminated with
a corresponding END-IF statement.
Example:
  READ ...
   IF ...
      COMPUTE ...
      COMPUTE ...
   END-IF
  DISPLAY
  END-READ
  END
Actn.
Correct error in program.

NAT0601: "END-START" missing for AT START OF DATA in line :1:.

Text
"END-START" missing for AT START OF DATA in line ....
Expl.
In structured mode, an AT START OF DATA statement block
must be terminated with a corresponding END-START statement.
Example:
  READ ...
    AT START OF DATA
       MOVE ...
       DISPLAY ...
    END-START
  DISPLAY ...
  END-READ
  END
Actn.
Correct error in program.

NAT0602: "END-ENDDATA" missing for AT END OF DATA in line :1:.

Text
"END-ENDDATA" missing for AT END OF DATA in line ....
Expl.
In structured mode, an AT END OF DATA statement block must be
terminated with a corresponding END-ENDDATA statement.
Example:
  READ ...
    AT END OF DATA
       COMPUTE ...
       DISPLAY ...
    END-ENDDATA
  DISPLAY ...
  END-READ
  END
Actn.
Correct error in program.

NAT0603: "END-BREAK" missing for AT BREAK statement in line :1:.

Text
"END-BREAK" missing for AT BREAK statement in line ....
Expl.
In structured mode, an AT BREAK statement block must
be terminated by a corresponding END-BREAK statement.
Example:
  READ ...
    AT BREAK ...
       DISPLAY ...
    END-BREAK
  DISPLAY
  END-READ
  END
Actn.
Correct error in program.

NAT0604: "END-TOPPAGE" missing for AT TOP OF PAGE in line :1:.

Text
"END-TOPPAGE" missing for AT TOP OF PAGE in line ....
Expl.
In structured mode, an AT TOP OF PAGE statement block must
be terminated by a corresponding END-TOPPAGE statement.
Example:
  READ ...
  DISPLAY ...
   AT TOP OF PAGE
      WRITE ...
   END-TOPPAGE
  DISPLAY ...
  END-READ
  END
Actn.
Correct error in program.

NAT0605: "END-ENDPAGE" missing for AT END OF PAGE in line :1:.

Text
"END-ENDPAGE" missing for AT END OF PAGE in line ....
Expl.
In structured mode, an AT END OF PAGE statement block must
be terminated by a corresponding END-ENDPAGE statement.
Example:
  READ ...
   AT END OF PAGE
     DISPLAY ...
     WRITE TRAILER ...
   END-ENDPAGE
  DISPLAY ...
  END-READ
  END
Actn.
Correct error in program.

NAT0606: "END-BEFORE" missing for BEFORE BREAK in line :1:.

Text
"END-BEFORE" missing for BEFORE BREAK in line ....
Expl.
In structured mode, a BEFORE BREAK PROCESSING statement block
must be terminated by a corresponding END-BEFORE statement.
Actn.
Correct error in program.

NAT0607: "END-NOREC" missing for IF NO RECORDS FOUND.

Text
"END-NOREC" missing for IF NO RECORDS FOUND.
Expl.
In structured mode, an IF NO RECORDS FOUND clause must
be terminated with a corresponding END-NOREC statement.
Example:
  FIND ...
   IF NO RECORDS FOUND
      DISPLAY ...
   END-NOREC
  DISPLAY
  END-FIND
Actn.
Correct error in program.

NAT0608: "END-ENDFILE" missing for AT END OF FILE in line :1:.

Text
"END-ENDFILE" missing for AT END OF FILE in line ....
Expl.
In structured mode, an AT END OF FILE statement block must
be terminated by a corresponding END-ENDFILE statement.
Example:
  READ WORK FILE
   AT END OF FILE
      COMPUTE ...
      DISPLAY ...
   END-ENDFILE
  DISPLAY ...
  END
Actn.
Correct error in program.

NAT0609: "END-ERROR" missing for ON ERROR statement in line :1:.

Text
"END-ERROR" missing for ON ERROR statement in line ....
Expl.
In structured mode, an ON ERROR statement block must
be terminated by a corresponding END-ERROR statement.
Example:
  FIND ...
  UPDATE ...
    ON ERROR
       RETRY
    END-ERROR
  END TRANSACTION
  END-FIND
  END
Actn.
Correct error in program.

NAT0610: This statement is not permitted in reporting mode.

Text
This statement is not permitted in reporting mode.
Expl.
An attempt was made to issue a statement which is valid
in structured mode only.
Actn.
Make sure you are working in the correct programming mode.

NAT0611: Loop/condition not properly closed.

Text
Loop/condition not properly closed.
Expl.
An active loop or condition was not properly closed.
For example, in structured mode, a FIND statement was
issued without a corresponding END-FIND statement.
Actn.
Check program and correct error.

NAT0612: Specified close loop only permitted in structured mode.

Text
Specified close loop only permitted in structured mode.
Actn.
Check programming mode, program, and correct error.

NAT0613: END-FIND/END-SELECT missing for FIND/SELECT in line :1:.

Text
END-FIND/END-SELECT missing for FIND/SELECT in line ....
Expl.
In structured mode, a loop initiated with a FIND/SELECT statement
must be closed with a corresponding END-FIND/END-SELECT statement.
Examples:
  FIND ...                 *        SELECT ...
    UPDATE                 *          DISPLAY ...
    END TRANSACTION        *        END-SELECT
  END-FIND                 *
Actn.
Supply END-FIND/END-SELECT to close the FIND/SELECT loop.

NAT0614: END-READ missing for READ in line :1:.

Text
END-READ missing for READ in line ....
Expl.
In structured mode, a READ statement must be followed by a
corresponding END-READ statement.
Example:
  READ ...
    DISPLAY
    COMPUTE ...
  END-READ
Actn.
Supply END-READ to close the READ loop.

NAT0615: END-HISTOGRAM missing for HISTOGRAM in line :1:.

Text
END-HISTOGRAM missing for HISTOGRAM in line ....
Expl.
In structured mode, a HISTOGRAM statement must be
followed by a corresponding END-HISTOGRAM statement.
Example:
  HISTOGRAM ...
    DISPLAY ...
  END-HISTOGRAM
Actn.
Supply END-HISTOGRAM to close the HISTOGRAM loop.

NAT0616: END-SORT missing for SORT in line :1:.

Text
END-SORT missing for SORT in line ....
Expl.
In structured mode, a SORT statement must be followed by
a corresponding END-SORT statement.
Example:
  FIND
  ...
  END-ALL
  SORT ...
    DISPLAY ...
  END-SORT
Actn.
Supply END-SORT to close the SORT loop.

NAT0617: END-REPEAT missing for REPEAT in line :1:.

Text
END-REPEAT missing for REPEAT in line ....
Expl.
In structured mode, a REPEAT statement must be followed
by a corresponding END-REPEAT statement.
Example:
  REPEAT ...
  ...
  ...
  END-REPEAT
Actn.
Supply END-REPEAT to close the REPEAT loop.

NAT0618: END-FOR missing for FOR in line :1:.

Text
END-FOR missing for FOR in line ....
Expl.
In structured mode, a FOR statement must be followed
by a corresponding END-FOR statement.
Example:
  FOR ...
    ...
  END-FOR
Actn.
Supply END-FOR to close the FOR loop.

NAT0619: END-WORK missing for READ WORK FILE in line :1:.

Text
END-WORK missing for READ WORK FILE in line ....
Expl.
In structured mode, a READ WORK FILE statement must
be followed by a corresponding END-WORK statement.
Example:
  READ WORK FILE
  ...
  ...
  END-WORK
Actn.
Supply END-WORK to close the READ WORK FILE loop.

NAT0620: END-FILE missing for CALL FILE in line :1:.

Text
END-FILE missing for CALL FILE in line ....
Expl.
In structured mode, a CALL FILE statement must be
followed by a corresponding END-FILE statement.
Example:
  CALL FILE  ...
  ...
  ...
  END-FILE
Actn.
Supply END-FILE to close the CALL FILE loop.

NAT0621: END-LOOP missing for CALL LOOP in line :1:.

Text
END-LOOP missing for CALL LOOP in line ....
Expl.
In structured mode, a CALL LOOP statement must be
followed by a corresponding END-LOOP statement.
Example:
  CALL LOOP ...
  ...
  ...
  END-LOOP
Actn.
Supply END-LOOP to close the CALL LOOP loop.

NAT0622: RETURN/END-SUBROUTINE missing for DEFINE SUBROUTINE in line :1:.

Text
RETURN/END-SUBROUTINE missing for DEFINE SUBROUTINE in line ....
Expl.
This error occurs under one of the following conditions:
1) A subroutine was started in a conditional statement block (e.g. IF,
   DECIDE) or in a loop-initiating statement (e.g. REPEAT, FIND),
   but it was not closed at the end of this statement (e.g. END-IF,
   END-REPEAT,).
   Examples: | IF FIELD = "A" THEN      |   REPEAT                   |
             |   DEFINE SUBROUTINE ABC  |     DEFINE SUBROUTINE ABC  |
             |   WRITE "HELLO"          |     WRITE "HELLO"          |
             | END-IF                   |   END-REPEAT               |
2) A subroutine was started, but it was still not closed at program end.
   Example: DEFINE SUBROUTINE ABC
            END
Actn.
Supply RETURN or END-SUBROUTINE to close the subroutine.

NAT0623: Variable/field/view must be defined in DEFINE DATA.

Text
Variable/field/view must be defined in DEFINE DATA.
Expl.
If a DEFINE DATA statement is present, all variables/fields to be
used must be defined in the DEFINE DATA statement in an LDA, GDA
or PDA, which are referenced with the keyword USING in the
DEFINE DATA statement.
If this error occurs for a DDM and a DEFINE DATA statement is
present, a view of the DDM (and of any database field referenced
in the program) must be defined in the DEFINE DATA statement.
Actn.
Check program and correct error.

NAT0624: Statement END-... either missing or misplaced.

Text
Statement END-... either missing or misplaced.
Expl.
Example:     READ ...
                IF AGE > 65 THEN
                    COMPUTE ...
                DISPLAY ...
             END-READ
             END-IF
             END
The statement END-IF must be before the END-READ and after the last
statement to be executed in the THEN-clause of the IF-statement.
This could be after the COMPUTE or the DISPLAY statement, depending
on the actual function the program is to perform.
Statements with the syntax "xxx ... END-xxx" must be correctly
paired.
Actn.
Make sure that all statement blocks are terminated with corresponding
"END-..." statements, and that the "xxx" and "END-xxx" statements are
correctly paired.

NAT0625: END-DECIDE missing for DECIDE statement.

Text
END-DECIDE missing for DECIDE statement.
Expl.
A statement block initiated with a DECIDE ON or DECIDE FOR statement
must be terminated with an END-DECIDE statement.
This error may also occur if an END-DECIDE statement is misplaced.
Actn.
Make sure that each DECIDE statement is correctly paired with a
corresponding END-DECIDE statement.

NAT0626: Statement not supported with :1:.

Text
Statement not supported with ....
Expl.
The statement cannot be used with the database type you
are using. For details as to which statements support
which database types, see the Natural documentation.
Actn.
Check program and correct error.

NAT0627: Value range with keyword "TO" not supported for :1:.

Text
Value range with keyword "TO" not supported for ....
Expl.
The statement option "TO" cannot be used with the database
type you are using.
When "TO" is used to specify a value range in a READ
or HISTOGRAM statement, the end-value check will not be done
by Natural, but is performed by the database. However, this
requires a corresponding capability of the accessed database.
Therefore, option "TO" can only be used if the underlying
database is Adabas Version 7 (or above), VSAM, DL/I or DB2.
For details as to which statements support which database
types, see the Natural documentation.
Actn.
Check program and correct error.

NAT0628: Invalid usage of MULTI-FETCH option for :1:.

Text
Invalid usage of MULTI-FETCH option for ....
Expl.
The MULTI-FETCH option can only be used if the underlying database is
Adabas.
The MULTI-FETCH option is not permitted, if a
- READ or HISTOGRAM statement contains a "DYNAMIC .. SEQUENCE" clause;
- READ or FIND statement contains an "IN SHARED HOLD" clause.
For further details, see the Natural documentation.
Actn.
Check program and correct error.

NAT0629: Incompatible range combinations in relational expression.

Text
Incompatible range combinations in relational expression.
Expl.
When two arrays are compared in a relational expression,
the number of occurrences in each dimension of the one array
must match the number of occurrences in the corresponding
dimension of the other array.
If no corresponding dimension is defined for the other array,
the dimension is assumed to be 1.
A variable number of occurrences in one dimension must not
be compared with a fixed number of occurrences in the
corresponding dimension of the other array.
Actn.
Correct error in program.

NAT0630: Error in RESET INITIAL statement.

Text
Error in RESET INITIAL statement.
Expl.
See the Natural documentation for information on the correct usage
of the RESET INITIAL statement.
Note in particular that a RESET INITIAL of fields resulting from
a redefinition is not possible, and RESET INITIAL cannot be
applied to database fields.
Actn.
Check program and correct error.

NAT0631: Invalid index specified in arithmetic/ASSIGN statement.

Text
Invalid index specified in arithmetic/ASSIGN statement.
Actn.
Check program and correct error.

NAT0632: Invalid view structure defined for HISTOGRAM statement.

Text
Invalid view structure defined for HISTOGRAM statement.
Expl.
When using the HISTOGRAM statement with a view, it must
be defined with only one variable: the search variable.
Actn.
Check program and correct error.

NAT0633: Invalid use of view which contains super-/subdescriptor.

Text
Invalid use of view which contains super-/subdescriptor.
Expl.
Depending on the Adabas version, a sub- or superdescriptor may be read
with a HISTOGRAM statement only or with all database access statements.
However, an UPDATE or STORE statement must not be applied to a sub-
or superdescriptor.
Actn.
Correct error in program.

NAT0634: Access criterion not supported for this type of database.

Text
Access criterion not supported for this type of database.
Expl.
The DBID of this DDM identifies a non-Adabas database.
Non-Adabas databases introduce certain restrictions for
Natural"s database-access statements.
Actn.
See the Natural documentation for restrictions which apply to
the type of database you wish to access.

NAT0635: Incorrect use of "BY VALUE" or "OPTIONAL" in DEFINE DATA.

Text
Incorrect use of "BY VALUE" or "OPTIONAL" in DEFINE DATA.
Expl.
The keyword "BY VALUE" or "OPTIONAL" may only be supplied for fields
defined in a DEFINE DATA PARAMETER clause.
However, this is not permitted for REDEFINE fields or groups.
Actn.
Correct error in program.

NAT0636: Incorrect usage of STARTING WITH ISN clause for :1:.

Text
Incorrect usage of STARTING WITH ISN clause for ....
Expl.
A STARTING WITH ISN clause can only be used for
- Adabas access : FIND
                  READ logical
                  READ physical
- VSAM access   : READ physical
Actn.
Correct error in program.

NAT0637: Invalid USING clause specified.

Text
Invalid USING clause specified.
Expl.
Invalid USING clause specified in OPEN CONVERSATION statement.
Possible reasons for this error are:
1. Keyword USING missing.
2. Incorrect object name specified. Either a constant or a
   variable of type alpha and length <= 8 is expected.
Actn.
Correct error in program.

NAT0638: Invalid clause in CLOSE CONVERSATION statement.

Text
Invalid clause in CLOSE CONVERSATION statement.
Expl.
The operand in a CLOSE CONVERSATION statement is incorrect.
Please specify keyword ALL or *CONVID or a variable of type (I4).
Actn.
Correct error in program.

NAT0639: Referenced GDA cannot be converted to the current version.

Text
Referenced GDA cannot be converted to the current version.
Expl.
When a GDA cataloged with Version 2.2, 2.3 or 3.1 is referenced in a
DEFINE DATA GLOBAL statement, the GDA contents will automatically be
converted to the layout required by the current Natural version.
However, for internal reasons, this does not work for this GDA object.
Actn.
Recatalog the GDA.

NAT0640: Label reference not permitted for this statement type.

Text
Label reference not permitted for this statement type.
Expl.
Labels may be used to reference the following statements only:
FIND, READ, GET, HISTOGRAM, SORT, FOR, CALL FILE, CALL LOOP,
STORE and REPEAT.
Actn.
Check program and correct error.

NAT0641: Invalid DEFINE PRINTER statement syntax.

Text
Invalid DEFINE PRINTER statement syntax.
Expl.
The correct syntax is:
   DEFINE PRINTER (logical-name = n) OUTPUT operand1
   where "logical-name" is the name allocated to printer,
   "n" is the printer number in range from 1 to 31,
   "operand1" is the destination within the online spooling system.
Additional reports can be assigned for default with the following names:
   SOURCE   - Output in the Natural source area.
   CONNECT  - Output into a Con-nect folder.
   DUMMY    - Output to be deleted.
   HARDCOPY - Output to the current hardcopy device.
Actn.
Check program and correct error.

NAT0642: Invalid definition of OUTPUT variable/constant.

Text
Invalid definition of OUTPUT variable/constant.
Expl.
This field must be specified with format A8.
Actn.
Check program and correct error.

NAT0643: END-PROCESS missing for PROCESS PAGE MODAL in line :1:.

Text
END-PROCESS missing for PROCESS PAGE MODAL in line ....
Expl.
This error occurs under one of the following conditions:
1) A PROCESS PAGE MODAL statement was started in a conditional
   statement block (e.g. IF, DECIDE) or in a loop-initiating
   statement (e.g. REPEAT, FIND), but it has not been closed yet at
   the end of this statement (e.g. END-IF or END-REPEAT). Examples:
     IF FIELD = "A" THEN         *        REPEAT
       PROCESS PAGE MODAL        *          PROCESS PAGE MODAL
         MOVE #A TO #B           *            MOVE #A TO #B
     END-IF                      *        END-REPEAT
2) A PROCESS PAGE MODAL statement was started, but not yet
   closed at program end.
   Example:        PROCESS PAGE MODAL
                   END
Actn.
Supply END-PROCESS to close the PROCESS PAGE MODAL block.

NAT0644: Maximum number of parameters exceeded.

Text
Maximum number of parameters exceeded.
Expl.
The number of parameters permitted in a CALLNAT or PERFORM statement
is limited to 4096.
Actn.
Reduce the number of parameters.

NAT0645: END-PARSE missing for PARSE XML in line :1:.

Text
END-PARSE missing for PARSE XML in line ....
Expl.
In structured mode, a PARSE XML statement must be followed
by a corresponding END-PARSE statement.
Example:
  PARSE XML #DOC
    DISPLAY ..
  END-PARSE
Actn.
Supply keyword END-PARSE to close the PARSE XML loop.

NAT0646: :1: missing for :2: in line :3:.

Text
... missing for ... in line ....
Expl.
In the case of flexible SQL syntax, the characters ">>" are not
recognized for the matching "<<" characters.
Probably a Natural comment sign "/*" is contained in the flexible SQL
string between the characters "<<" and ">>".
Actn.
Check the flexible SQL syntax for the characters ">>".

NAT0647: Program code not compatible with Version 4.1; reason :1:.

Text
Program code not compatible with Version 4.1; reason ....
Expl.
Compiler parameter V41COMP=ON is set. The following syntax constructions
are not accepted by Natural Version 4.1:
Possible reason codes:
01: Unicode type not allowed.      07: Wrong system variable.
02: X-Array not allowed.           08: I/O field option (DL=..).
03: Constant length > 253 bytes.   09: INCLUDE parameter > 80 bytes.
04: Wrong compiler option.         10: DYNAMIC field used in data view.
05: Wrong statement clause.
06: Wrong use of SET GLOBALS.
For a more detailed error description, see the compiler
parameter V41COMP (NTCMPO macro) in the Natural documentation.
Actn.
Do not use the indicated programming feature, or set V41COMP=OFF.

NAT0648: Parameter :1: inconsistently specified. Reason code :2:.

Text
Parameter ... inconsistently specified. Reason code ....
Expl.
The parameter supplied in a CALLNAT statement or a function call is not
compatible with the corresponding parameter definition in the
subprogram or function.
Reason codes:
04 : The CALLNAT or function call parameter is specified as an empty
     parameter ("nX"), but the parameter definition in the subprogram
     or function is not "OPTIONAL".
08 : A mandatory parameter in the subprogram or function definition is
     missing in the CALLNAT statement or function call.
12 : Parameters do not match in format.
16 : Parameters do not match in length.
20 : Parameters do not match in array definitions.
Actn.
Supply compatible parameter specifications.

NAT0649: Database type :1: is not supported.

Text
Database type ... is not supported.
Expl.
The database type is not supported in the current Natural version.
Actn.
Use another database type.