REQUEST DOCUMENT

REQUEST DOCUMENT FROM operand1

  WITH    

  [ USER operand2]      
  [PASSWORD operand3]      
  [HEADER[[NAME] operand4 [VALUE] operand5]}...]    

DATA

ALL operand6 [ENCODED [[IN] CODEPAGE operand7]]

{[NAME] operand8 [VALUE] operand9}...
                     

RETURN      

HEADER [ALL operand10] [[NAME] operand11 [VALUE] operand12]...
[PAGE operand13 [ENCODED [[FOR TYPES[S] operand14...] [IN] CODEPAGE operand15]]]
  RESPONSE operand16    
[GIVING operand17]

This document covers the following topics:

For an explanation of the symbols used in the syntax diagram, see Syntax Symbols.

Belongs to Function Group: Internet and XML


Function

The REQUEST DOCUMENT statement gives you the means to access an external system, see Statements for Internet and XML Access in the Programming Guide.

For information on Unicode support, see Statements in the Unicode and Code Page Support documentation.

See also the description of the Natural profile and session parameter RQTOUT, which specifies the timeouts used for HTTP requests issued internally by the REQUEST DOCUMENT statement.

Restrictions for Cookies

Under the HTTP Protocol, a server uses cookies to maintain state information on the client workstation.

REQUEST DOCUMENT is implemented using internet option settings. This means that, depending on the security settings, cookies will be used.

If the internet option setting Disabled is set, no cookies will be sent, even if a cookie header (operand4/operand5) is sent.

For server environments, do not use the internet option setting Prompt. This setting leads to a "hanging" server, because no client will be able to answer the prompt.

In mainframe environments, cookies are not supported and are ignored.

The following profile parameters have to be considered: NOPROX, PROXPORT, PROX, SSLPRX, SSLPRXPT, NOSSLPRX. For information on these profile parameters, refer to the Parameter Reference.

For HTTPS, OpenSSL must be installed.

Syntax Description

Operand Definition Table:

Operand Possible Structure Possible Formats Referencing Permitted Dynamic Definition
operand1 C S       A                       yes no
operand2 C S       A                       yes no
operand3 C S       A                       yes no
operand4 C S       A                       yes no
operand5 C S       A   N P I F   D T L     yes no
operand6 C S       A U N P I F B D T L     yes no
operand7 C S       A                       yes no
operand8 C S       A                       yes no
operand9 C S       A   N P I F   D T L     yes no
operand10   S       A                       yes yes
operand11 C S       A                       yes no
operand12   S       A   N P I F B D T L     yes yes
operand13   S       A U         B           yes yes
operand14 C S       A                       yes no
operand15 C S       A                       yes no
operand16   S               I4               yes yes
operand17   S               I4               yes no

Syntax Element Description:

Syntax Element Description
DOCUMENT FROM operand1
Location of Document:

operand1 is the URL to access a document.

Note:
The information below is only valid if operand1 begins with http:// or https://.

WITH
WITH Clause:

This clause may be used to specify optional user/password, header and data details for the request.

USER operand2
User Name:

operand2 is the name of the user that will be used for the request.

PASSWORD operand3
User Password:

operand3 is the password of the user that will be used for the request.

HEADER {[[NAME] operand4 [VALUE] operand5]}...
Header Clause:

operand4 and operand5 can only be used in conjunction with each other:

  • operand4 is the name of a HEADER variable sent with this request.

  • operand5 is the value of a HEADER variable sent with this request.

Note:

Header Name for operand4:

Header names must not contain a carriage return (CR), a line feed (LF) or a colon (:). This will not be checked by the REQUEST DOCUMENT statement. For valid header names, please see the HTTP specifications. For compatibility with the web interface, header names can be written with underscore (_) instead of a dash (-). (Internally, the underscore is replaced by a dash).

Header Value for operand5:

Header values are not allowed to contain CR/LF. This will not be checked by the REQUEST DOCUMENT statement. For valid header values and formats, please see the HTTP specifications.

General Information on Headers:

For a HTTP request, some headers are required, for example: Request-Method or Content-Type. These headers will be automatically generated depending on the parameters given with the REQUEST DOCUMENT statement.

See also Automatically Generated Headers.

DATA
DATA Clause:

You may specify either a specific DATA variable name and value (see operand8 and operand9 below) or the complete document (see DATA ALL Clause below).

ALL operand6

operand6 is a complete document that is to be sent. This value is needed for the HTTP request method PUT (see Automatically Generated Headers).

See Encoding of Incoming/Outgoing Data, DATA ALL Clause.

[ENCODED [[IN] CODEPAGE operand7]

operand6 will be encoded from the default code page (value of the system variable *CODEPAGE) to the code page given in operand7.

See Encoding of Incoming/Outgoing Data, DATA ALL Clause.

{[NAME] operand8 [VALUE] operand9}...
DATA Variable Name and Value:

operand8 and operand9 can only be used in conjunction with each other:

  • operand8 is the name of a DATA variable to be sent with this request.

  • operand9 is the value of a DATA variable to be sent with this request. This value is needed for the HTTP request method POST (URL-encoding necessary, especially ampersand (&), equal sign (=), percent sign (%) characters).

Restriction:

If operand8/operand9 is given, and the communication is http:// or https:// by default, the request method POST (see Automatically Generated Headers) with content type application/x-www-form-urlencoded is used. During the request, operand8/operand9 will be separated by equal sign (=) and ampersand (&) characters. Therefore the operands are not allowed to contain equal sign (=), ampersand (&) and, because of URL-encoding, percent sign (%) characters. These characters are considered "unsafe" and need to be encoded as:

Character
URL-Encoding Syntax
% %25
& %26
= %3D
See also General Note for URL-Encoding.
RETURN
RETURN Clause:

This clause can be used to specify the HEADER and/or PAGE return information.

HEADER [ALL operand10]
RETURN HEADER ALL Clause:

When this clause is specified, operand10 contains all header values delivered with the HTTP response.

The first line contains the status information and all following lines contain the headers as pairs of name and value. The names always end in a colon (:) and the values end in a linefeed (LF). Internally, all carriage returns/line feeds (CR/LF) are transformed into line feeds (LF).

HEADER [[NAME] operand11] [VALUE] operand12]...
RETURN HEADER NAME/VALUE Clause:

When this clause is specified, only specific header information is returned.

operand11 and operand12 can only be used in conjunction with each other:

  • operand11 is the name of a HEADER received with this request. The HEADER is needed for HTTP.

  • operand12 is the value of a HEADER received with this request. The HEADER is needed for HTTP.

Return Header Name for operand11:

For compatibility with the web interface, header names can be written with underscore (_) instead of dash (-) characters.

Internally, the underscore is replaced by a dash. If operand11 is a blank string, the status information is returned.

HTTP/1.0 200 OK
RETURN PAGE
RETURN PAGE Clause:

You can use the PAGE clause if you want to have the incoming data encoded in a specific code page.

See Encoding of Incoming/Outgoing Data, RETURN PAGE Clause below.

PAGE operand13

operand13 is the document returned for this request.

See Encoding of Incoming/Outgoing Data, RETURN PAGE Clause below.

[ENCODED [[FOR TYPE[S] operand14...] [IN] CODEPAGE operand15]]

operand14 is the list of mime-types for which an encoding of the returned document in operand13 will be performed.

See Encoding of Incoming/Outgoing Data, RETURN PAGE Clause below.

operand15 is the code page which, if necessary, will be used for the encoding of operand13.

If the value of operator15 is blank, no conversion occurs. operand13 is then encoded in the default code page (profile parameter CP in the Configuration Utility).

See Encoding of Incoming/Outgoing Data, RETURN PAGE Clause below.

RESPONSE operand16
RESPONSE Clause:

The RESPONSE clause is used to display the response code number of the request.

operand16 is the response code number of the request, for example: 200 (Request Completed).

See also Overview of Response Numbers for HTTP Requests.

GIVING operand17
GIVING Clause:

operand17 contains the Natural error if the request could not be performed.

Automatically Generated Headers (operand4/5)

Request-Method

The following values are supported for operand5: HEAD, POST, GET, and PUT.

The following table shows the automatic calculation of Request-Method depending on the given operands:

Operand Request Method
HEAD POST GET PUT

WITH HEADER

(operand4/operand5)

optional optional optional optional

WITH DATA

(operand7/operand8)

not specified specified not specified only with option ALL (operand6)

RETURN HEADER

(operand10 to operand12)

specified optional optional optional

RETURN PAGE

(operand13)

not specified specified specified optional

Content-Type

If the request method is POST, a content-type header has to be delivered with the HTTP request. If no content-type is set explicitly, the automatically generated value of operand5 is:

application/x-www-form-urlencoded

Note:
It is possible to overwrite the automatically generated headers. Natural will not check them for errors. Unexpected errors may occur.

General Note for URL-Encoding

When sending POST data with the content type application/x-www-form-urlencoded, certain characters must be represented by means of URL-encoding, which means substituting the character with %hexadecimal-character-code. The full details of when and why URL-encoding is necessary are discussed in RFC 1630, RFC 1738 and RFC 1808. Some basic details are given here. All non-ASCII characters (that is, valid ISO 8859/1 characters that are not also ASCII characters) must be URL-encoded, for example, the file köln.html would appear in an URL as k%F6ln.html.

Some characters are considered to be "unsafe" when web pages are requested by e-mail.

These characters are:

Character URL-Encoding Syntax
the tab character %09
the space character %20
[ %5B
\ %5C
] %5D
^ %5E
` %60
{ %7B
| %7C
} %7D
~ %7E

When writing URLs, you should URL-encode these characters.

Some characters have special meanings in URLs, such as the colon (:) that separates the URL scheme from the rest of the URL, the double slash (//) that indicates that the URL conforms to the Common Internet Scheme syntax and the percent sign (%). Generally, when these characters appear as parts of file names, they must be URL-encoded to distinguish them from their special meaning in URLs (this is a simplification, read the RFCs for full details).

These characters are:

Character URL-Encoding Syntax
" %22
# %23
% %25
& %26
+ %2B
, %2C
/ %2F
: %3A
< %3C
= %3D
> %3E
? %3F
@ %40

Overview of Response Numbers for HTTP Requests

Status Value Response
STATUS CONTINUE 100 OK to continue with request
STATUS SWITCH_PROTOCOLS 101 Server has switched protocols in upgrade header
STATUS OK 200 Request completed
STATUS CREATED 201 Object created, reason = new URL
STATUS ACCEPTED 202 Async completion (TBS)
STATUS PARTIAL 203 Partial completion
STATUS NO_CONTENT 204 No info to return
STATUS RESET_CONTENT 205 Request completed, but clear form
STATUS PARTIAL_CONTENT 206 Partial GET fulfilled
STATUS AMBIGUOUS 300 Server could not decide what to return
STATUS MOVED 301 Object permanently moved
STATUS REDIRECT 302 Object temporarily moved
STATUS REDIRECT_METHOD 303 Redirection w/o new access method
STATUS NOT_MODIFIED 304 If-modified-since was not modified
STATUS USE_PROXY 305 Redirection to proxy, location header specifies proxy to use
STATUS REDIRECT_KEEP_VERB 307 HTTP/1.1: keep same verb
STATUS BAD_REQUEST 400 Invalid syntax
STATUS DENIED 401 Access denied
STATUS PAYMENT_REQ 402 Payment required
STATUS FORBIDDEN 403 Request forbidden
STATUS NOT_FOUND 404 Object not found
STATUS BAD_METHOD 405 Method is not allowed
STATUS NONE_ACCEPTABLE 406 No response acceptable to client found
STATUS PROXY_AUTH_REQ 407 Proxy authentication required
STATUS REQUEST_TIMEOUT 408 Server timed out waiting for request
STATUS CONFLICT 409 User should resubmit with more info
STATUS GONE 410 The resource is no longer available
STATUS LENGTH_REQUIRED 411 The server refused to accept request w/o a length
STATUS PRECOND_FAILED 412 Precondition given in request failed
STATUS REQUEST_TOO_LARGE 413 Request entity was too large
STATUS URL_TOO_LONG 414 Request URL too long
STATUS UNSUPPORTED_MEDIA 415 Unsupported media type
STATUS SERVER_ERROR 500 Internal server error
STATUS NOT_SUPPORTED 501 "Required" not supported
STATUS BAD_GATEWAY 502 Error response received from gateway
STATUS SERVICE_UNAVAIL 503 Temporarily overloaded
STATUS GATEWAY_TIMEOUT 504 Timed out waiting for gateway
STATUS VERSION_NOT_SUP 505 HTTP version not supported

Response 301 - 303 (Redirection)

Redirection means that the requested URL has moved. As a response, the Return Header with the name LOCATION will be displayed. This header contains the URL where the requested page has moved to. A new REQUEST DOCUMENT request can be used to retrieve the page moved.

HTTP browsers redirect automatically to the new URL, but the REQUEST DOCUMENT statement does not handle redirection automatically.

Response 401 (Denied)

The response Access Denied means that the requested page can only be accessed if a valid user ID and password are provided with the request. As a response, the Return Header with the name WWW-AUTHENTICATE will be delivered with the realm needed for this request.

HTTP browsers normally display a dialog with user ID and password, but with the REQUEST DOCUMENT statement, no dialog is displayed.

Encoding of Incoming/Outgoing Data

Data transfer with the REQUEST DOCUMENT statement normally does not involve any code page conversion. If you want to have the outgoing and/or incoming data encoded in a specific code page, you can use the DATA ALL clause and/or the RETURN PAGE clause to specify this.

DATA ALL Clause

For the encoding of outgoing data, the DATA ALL clause is used:

ALL  operand6 [ENCODED [[IN] CODEPAGE operand7]]

Syntax Element Description:

Syntax Element Description
ALL operand6 operand6 is a complete document that is to be sent. This value is normally needed for the automatically HTTP request method PUT (see Automatically Generated Headers).
[ENCODED [[IN] CODEPAGE operand7]] operand6 will be encoded from the default code page (value of system variable *CODEPAGE) to the code page given in operand7.

RETURN PAGE Clause

For the encoding of incoming data, the RETURN PAGE clause is used:

[PAGE  operand13 [ENCODED [[FOR TYPE[S] operand14...] [IN] CODEPAGE operand15]]]

As a response of an HTTP/HTTPS request, incoming data may contain binary data (for example, image/gif) or character data (for example, text/html). Together with the response, the REQUEST DOCUMENT statement receives a parameter which specifies the type of content of the requested document (mime-type). This parameter may contain information about the code page in which the document is encoded.

This clause provides an automatic conversion to the default code page (value of system variable *CODEPAGE) of the Natural session.

Syntax Element Description:

Syntax Element Description
RETURN PAGE operand13 No encoding at all of the returned page will be done; that is, the page will remain encoded as delivered from the http server.
RETURN PAGE operand13 ENCODED If the returned mime-type contains an encoding, operand13 will be encoded from this code page to the default code page (A/B) or (U). See note below.
RETURN PAGE operand13 ENCODED [IN] CODEPAGE operand15 If the returned mime-type does not contain an encoding, then operand13 will be encoded from the code page defined with operand15 to the default code page (value of system variable *CODEPAGE) (A/B) or (U).
RETURN PAGE operand13 [ENCODED [[FOR TYPE[S] operand14...] [IN] CODEPAGE operand15]] If the returned mime-type does not contain an encoding, then an additional check is performed if the returned mime-type matches one of the types given with operand14. If a match occurs, operand13 will be encoded from the code page defined with operand15 to the default code page (A/B) or (U).

Note:
"Returned mime-type contains an encoding" means that the http server returns a content-type header with a charset= clause, for example: charset=ISO-8859-1.

Examples

Note:
There is an example dialog V5-RDOC for this statement in the example library SYSEXV.

Example 1 - General Request

REQUEST DOCUMENT FROM "http://bolsap1:5555/invoke/sap.demo/handle_RFC_XML_POST" 
  WITH
    USER #User PASSWORD #Password
    DATA
    NAME 'XMLData'       VALUE #Queryxml
    NAME 'repServerName' VALUE 'NT2'
  RETURN
    PAGE #Resultxml
RESPONSE #rc

Example 2 - Simple Get Request (no data)

REQUEST DOCUMENT FROM "http://pcnatweb:8080"
  RETURN
    PAGE #Resultxml
RESPONSE #rc

Example 3 - Simple Head Request (no return page)

REQUEST DOCUMENT FROM "http://pcnatweb"
RESPONSE #rc

Example 4 - Simple Post Request (default)

REQUEST DOCUMENT FROM "http://pcnatweb/cgi-bin/nwwcgi.exe/sysweb/nat-env"
  WITH 
    DATA 
    NAME 'XMLData'       VALUE #Queryxml
    NAME 'repServerName' VALUE 'NT2'
  RETURN
    PAGE #Resultxml
RESPONSE #rc

Example 5 - Simple Put Request (with DATA ALL)

REQUEST DOCUMENT FROM "http://pcnatweb/test.txt"
  WITH 
    DATA ALL     #document
  RETURN
    PAGE #Resultxml
RESPONSE #rc