ROWTABAREA and COLTABAREA

Height of the control.

There are three possibilities to define the height:

(A) You do not define a height at all. As consequence the control will be rendered with its default height. If the control is a container control (containing) other controls then the height of the control will follow the height of its content.

(B) Pixel sizing: just input a number value (e.g. "20").

(C) Percentage sizing: input a percantage value (e.g. "50%"). Pay attention: percentage sizing will only bring up correct results if the parent element of the control properly defines a height this control can reference. If you specify this control to have a height of 50% then the parent element (e.g. an ITR-row) may itself define a height of "100%". If the parent element does not specify a width then the rendering result may not represent what you expect.

100

150

200

250

300

250

400

50%

100%

Inserts a horizontal distance left of the first "tab" and shifts the "tabs" to the right as consequence. The value you may define represents the number of pixels that are inserted.

1

2

3

int-value

If set to "true" then small icons will appear on the right border of the control. If the size of the "tabs" is too big and some tabs are cut as consequence then you can use these icons for scrolling left and right.

true

false

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

If you want a close-icon to be shown at the right top corner of the tab, set this property value to "true". Default is "false".

true

false

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

If you want a close-icon to be shown at the right top corner of the tab, set this property value to "true". Default is "false".

true

false

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

If you want a close-icon to be shown at the right top corner of the tab, set this property value to "true". Default is "false".

true

false

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

If you want a close-icon to be shown at the right top corner of the tab, set this property value to "true". Default is "false".

true

false

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

If you want a close-icon to be shown at the right top corner of the tab, set this property value to "true". Default is "false".

true

false

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

If you want a close-icon to be shown at the right top corner of the tab, set this property value to "true". Default is "false".

true

false

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

If you want a close-icon to be shown at the right top corner of the tab, set this property value to "true". Default is "false".

true

false

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

If you want a close-icon to be shown at the right top corner of the tab, set this property value to "true". Default is "false".

true

false

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

If you want a close-icon to be shown at the right top corner of the tab, set this property value to "true". Default is "false".

true

false

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

If you want a close-icon to be shown at the right top corner of the tab, set this property value to "true". Default is "false".

true

false

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

If you want a close-icon to be shown at the right top corner of the tab, set this property value to "true". Default is "false".

true

false

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

If you want a close-icon to be shown at the right top corner of the tab, set this property value to "true". Default is "false".

true

false

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

If you want a close-icon to be shown at the right top corner of the tab, set this property value to "true". Default is "false".

true

false

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

If you want a close-icon to be shown at the right top corner of the tab, set this property value to "true". Default is "false".

true

false

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

If you want a close-icon to be shown at the right top corner of the tab, set this property value to "true". Default is "false".

true

false

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

If you want a close-icon to be shown at the right top corner of the tab, set this property value to "true". Default is "false".

true

false

Name of adapter parameter which represents the index of the "tab" that is currently opened.

There are two ways of using the property: either you can define which "tab" should be opened or you can react to "tab" selections by the user. (Also have a look onto the property OPENMETHOD!).

The property must be of type "int" or "Integer" (or "String"). The left most "tab" represents index "0", the next one "1", etc.

Name of the event that is sent to the adapter when the user does a "tab" selection. The index of the "tab" that is opened can be transferred to the adapter by using the property OPENEDINDEXPROP.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

tabselectedstyleprop1

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop1

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop1

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop2

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop2

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop2

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop3

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop3

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop3

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop4

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop4

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop4

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop5

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop5

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop5

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop6

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop6

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop6

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop7

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop7

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop7

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop8

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop8

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop8

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop9

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop9

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop9

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop10

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop10

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop10

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop11

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop11

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop11

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop12

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop12

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop12

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop13

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop13

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop13

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop14

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop14

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop14

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop15

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop15

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop15

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop16

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop16

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop16

background-color: #FF0000

color: #0000FF

font-weight: bold

If specified as "false" then no left border will be drawn.

true

false

If specified as "false" then no right border will be drawn.

true

false

If specified as "false" then no bottom border will be drawn.

true

false

Some controls offer the possibility to define style variants. By this style variant you can address different styles inside your style sheet definition file (.css). If not defined "normal" styles are chosen, if defined (e.g. "VAR1") then other style definitions (xxxVAR1xxx) are chosen.

Purpose: you can set up style variants in the style sheet defintion and use them multiple times by addressing them via the "stylevariant" property. CIS currently offerst two variants "VAR1" and "VAR2" but does not predefine any semantics behind - this is up to you!

VAR1

Index that defines the tab order of the control. Controls are selected in increasing index order and in source order to resolve duplicates.

-1

0

1

2

5

10

32767

The control by default renders some blank vertical space (2 pixels) on top of its area. Reason: if you vertically arrange one ROW/COLAREA after the other then automatically some distance is put between.

By specifying "false" you can avoid this behaviour. "

true

false

Number of pixels between the left border and the area's content. Default is 5 pixels.

1

2

3

int-value

Number of pixels between the right border and the area's content. Default is 5 pixels.

1

2

3

int-value

Number of pixels between the top border and the area's content. Default is 5 pixels.

1

2

3

int-value

Number of pixels between the bottom border and the area's content. Default is 5 pixels.

1

2

3

int-value

Adds animation effects when the user uses the control.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view.

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Width of the control.

There are three possibilities to define the width:

(A) You do not define a width at all. In this case the width of the control will either be a default width or - in case of container controls - it will follow the width that is occupied by its content.

(B) Pixel sizing: just input a number value (e.g. "100").

(C) Percentage sizing: input a percantage value (e.g. "50%"). Pay attention: percentage sizing will only bring up correct results if the parent element of the control properly defines a width this control can reference. If you specify this control to have a width of 50% then the parent element (e.g. an ITR-row) may itself define a width of "100%". If the parent element does not specify a width then the rendering result may not represent what you expect.

100

120

140

160

180

200

50%

100%

Inserts a horizontal distance left of the first "tab" and shifts the "tabs" to the right as consequence. The value you may define represents the number of pixels that are inserted.

1

2

3

int-value

If set to "true" then small icons will appear on the right border of the control. If the size of the "tabs" is too big and some tabs are cut as consequence then you can use these icons for scrolling left and right.

true

false

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

Text that is shown in the corresponding "tab". Either define the text as NAME or as language dependent TEXTID.

Text ID that is transferred in a corresponding literal at runtime by the multi language management.

Id of the TABPAGE that is defined as child of the TABAREA. Use an id that is unique within the page and that is a "healthy" id: starting with characters, without blanks and without "strange" characters.

For each "tab" of the TABAREA you have to create one corresponding TABPAGE below - holding exactly the id that is defined in the PAGE property.

Name of adapter parameter which represents the index of the "tab" that is currently opened.

There are two ways of using the property: either you can define which "tab" should be opened or you can react to "tab" selections by the user. (Also have a look onto the property OPENMETHOD!).

The property must be of type "int" or "Integer" (or "String"). The left most "tab" represents index "0", the next one "1", etc.

Name of the event that is sent to the adapter when the user does a "tab" selection. The index of the "tab" that is opened can be transferred to the adapter by using the property OPENEDINDEXPROP.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of property that defines if the corresponding tag is visible or not. NOTICE: If you want the framework to automatically set the focus to the first visible tab you also must apply a name for the attribute OPENEDINDEXPROP. You don't have to set a value at runtime, but you need to specify a valid name.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Name of the adapter parameter that dynamically defines if the control is disabled or enabled at runtime. If the value at runtime is set to TRUE the control is visible but disabled. In COLTABAREA controls this property is only supported for IE.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

Property of adapter that dynamically defines the title of the control. The title is displayed as tool tip when ther user moves the mouse onto the control.

tabselectedstyleprop1

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop1

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop1

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop2

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop2

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop2

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop3

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop3

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop3

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop4

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop4

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop4

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop5

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop5

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop5

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop6

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop6

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop6

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop7

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop7

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop7

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop8

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop8

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop8

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop9

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop9

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop9

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop10

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop10

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop10

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop11

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop11

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop11

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop12

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop12

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop12

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop13

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop13

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop13

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop14

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop14

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop14

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop15

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop15

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop15

background-color: #FF0000

color: #0000FF

font-weight: bold

tabselectedstyleprop16

background-color: #FF0000

color: #0000FF

font-weight: bold

tabunselectedstyleprop16

background-color: #FF0000

color: #0000FF

font-weight: bold

tabdisabledstyleprop16

background-color: #FF0000

color: #0000FF

font-weight: bold

If specified as "false" then no left border will be drawn.

If specified as "false" then no right border will be drawn.

If specified as "false" then no bottom border will be drawn.

Some controls offer the possibility to define style variants. By this style variant you can address different styles inside your style sheet definition file (.css). If not defined "normal" styles are chosen, if defined (e.g. "VAR1") then other style definitions (xxxVAR1xxx) are chosen.

Purpose: you can set up style variants in the style sheet defintion and use them multiple times by addressing them via the "stylevariant" property. CIS currently offerst two variants "VAR1" and "VAR2" but does not predefine any semantics behind - this is up to you!

VAR1

Index that defines the tab order of the control. Controls are selected in increasing index order and in source order to resolve duplicates.

-1

0

1

2

5

10

32767

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Tooltip text that appears on the corresponding tab.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Text ID for the tooltip of the corresponding "tab". At runtime the multi language management replaces the textid with a language dependent literal.

Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view.

Id of the TABPAGE. Each page has an id that refers to the PAGE1 .. PAGE9 definition inside the ROW/COLTABAREA control that contains the TABPAGE. Clicking a "tab" will display the TABPAGE with the associated id.

Initial display status of the TABPAGE. The first TABPAGE inside the ROW/COLTABAREA control must be set to "". All others need to be set ot "none". - If a ROW/COLTABAREA should show up with two or more pages being visible one below the other then check the setting of this property!"

Indicates if the content of the control's area gets the full available height.

If you use percentage sizing inside the control's area then this property must be switched to 'true'. If you use no explicit vertical sizing at all - or you use vertical pixel sizing for your controls - the property must be switched to 'false'.

Background information: container control's internally open up a table in which you place rows (ITR/TR) which then hold controls (e.g. LABEL/FIELD). The table that is opened up normally has no explicit height and grows with its content as consequence. By specifying "takefullheight=true" the table itself is sized to fill the maximum height of the available area.

true

false

The fixlayout property is important for saving rendering performance inside your browser. To become effective it requires to have specified the height and the width (if available as property) of the control.

If setting fixlayout to "true" then the control's area is defined as area which is not sized dependent on its content (as normally done with table rendering). Instead the size is predefined from outside without letting the browser "look" into the content of the area. If the content is not fitting into the area then it is cut.

You typically use this control if the content of the control's area is flexibly sizable. E.g. if the content (e.g. a TEXTGRID control) is following the size of the container.

When using vertical percentage based sizing you should pay attention to set the fixlayout-property to "true" as often as possible. - The browser as consequence will be much faster in doing its rendering because a screen consists out of "building blocks" with simple to calculate sizes.

true

false

Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view.