
Natural for Mainframes	Version 8.2.5 for Mainframes	SEARCH CONTENTS \| PDF BOOKS \| HOME UP PREV NEXT

— Terminal Commands —

%Y - Control of PF-Key Lines

%Y

N
S
P
W
U
A
H
B
T
[-]nn
F
L
X
I
V
C

Alternatively, you may specify:

%Y=color-code [color-code] [color-code]

The terminal command %Y is used to control the display of the Natural PF-key lines.

Note:
On graphical user interfaces, this command is ignored.

Application Programming Interface: USR1005N.

This document covers the following topics:

Display Format of Function-Key Lines
Single- and Double-Line Display
Positioning of Function-Key Lines
Range of Displayed Function Keys
Intensified or Reverse Video Display of Function-Key Lines
Coloring of Function-Key Lines
Cursor Sensitivity

Display Format of Function-Key Lines

Command	Function
`%YN`	Displays the function-key lines in normal tabular Software AG format.
`%YS`	Displays the function-key lines in sequential format, and only showing those keys to which names have been assigned (`PF1=value`,`PF2=value`, etc.).
`%YP`	Displays the function-key lines in PC-like sequential format; corresponds to `%YS`, except that `Fn=` instead of `PFn=` is displayed before the names.
`%YW`	Corresponds to `%YP` - but applies only if the function-key lines are displayed within a window.
`%YU`	Cancels the effect of `%YW`.

Single- and Double-Line Display

Command	Function
`%YA`	All-line display. Displays both function-key lines.
`%YH`	Half display. Displays only one function-key line; for normal tabular display mode (`%YN`), this is the line with the function-key names; for the other two display modes (`%YS` and `%YP`), this is the upper line to be displayed.

Positioning of Function-Key Lines

Command	Function
`%YB`	Displays the function-key lines at the bottom of the screen.
`%YT`	Displays the function-key lines at the top of the screen.
`%Ynn`	Displays the function-key lines on line `nn` on the screen.
`%Y-nn`	Displays the function-key lines on the `nn`th line from the bottom of the screen. If the line number `nn` or -`nn` is not within the current screen, the function-key lines will not be displayed.

Range of Displayed Function Keys

Command	Function
`%YF`	Displays the first range of function keys (that is, usually 1 to 12).
`%YL`	Displays the last range of function keys (that is, usually 13 to 24).
`%YX`	Is used to toggle-switch between the two displays.

Intensified or Reverse Video Display of Function-Key Lines

Command	Function
`%YI`	Displays the function-key lines intensified. Enter `%YI` again to switch back from intensified to non-intensified display.
`%YV`	Displays the function-key lines in reverse video. Enter `%YV` again to switch back from reverse video display to normal display.

Coloring of Function-Key Lines

Command Function

Command	Function
`%Y=color-code(s)`	Displays the function-key lines in the specified colors. The `color-codes` you can specify are the same as with the session parameter `CD`). You can specify up to three `color-codes`: the first `color-code` refers to the first function-key line (the one displaying the function-key numbers), the second `color-code` refers to the second function-key line (the one displaying the function-key names), and the third `color-code` refers to the background of both lines. For example, `%Y=GRPIYE` would cause the characters in the first line to be displayed in green, the characters in the second line in pink, and the background of both lines in yellow. Note: The third `color-code` will be ignored.


                     %Y=color-code(s)

Displays the function-key lines in the specified colors. The color-codes you can specify are the same as with the session parameter CD).

You can specify up to three color-codes: the first color-code refers to the first function-key line (the one displaying the function-key numbers), the second color-code refers to the second function-key line (the one displaying the function-key names), and the third color-code refers to the background of both lines.

For example, %Y=GRPIYE would cause the characters in the first line to be displayed in green, the characters in the second line in pink, and the background of both lines in yellow.

Note:
The third color-code will be ignored.

Cursor Sensitivity

Command Function

Command	Function
`%YC`	This command makes the function-key lines cursor-sensitive. This means that they react like an action bar on a PC screen: the user just moves the cursor to the desired function-key number or name displayed and presses ENTER, and Natural will react as if the corresponding function key had been pressed. Enter `%YC` again to switch cursor-sensitivity off again (toggle switch). By using `%YC` in conjunction with tabular Software AG display format (`%YN`) and having only the function-key names displayed (`%YH`), you may equip your applications with very comfortable action bar processing: the user merely has to select a function name with the cursor and press ENTER, and the function will be executed.

%YC

This command makes the function-key lines cursor-sensitive. This means that they react like an action bar on a PC screen: the user just moves the cursor to the desired function-key number or name displayed and presses ENTER, and Natural will react as if the corresponding function key had been pressed.

Enter %YC again to switch cursor-sensitivity off again (toggle switch).

By using %YC in conjunction with tabular Software AG display format (%YN) and having only the function-key names displayed (%YH), you may equip your applications with very comfortable action bar processing: the user merely has to select a function name with the cursor and press ENTER, and the function will be executed.

To activate the display of the function-key lines in a program, you use the session parameter KD=ON.

For further information, see Control of Function-Key Lines - Terminal Command %Y (in the Programming Guide).

SEARCH CONTENTS | PDF BOOKS | HOME UP PREV NEXT