Natural for Mainframes	Version 8.2.5 for Mainframes	SEARCH   CONTENTS   |   PDF BOOKS   |   HOME   UP   PREV   NEXT

DEFINE PRINTER		([logical-printer-name=]n)
[OUTPUT operand1]
	PROFILE operand2 CODEPAGE operand2 FORMS operand2 NAME operand2 DISP operand2 CLASS operand2 COPIES operand3 PRTY operand4

This document covers the following topics:

• Function

• Syntax Description

• Printer Name under z/OS Batch, TSO and Server

• Printer Name under z/VSE Batch

• Printer Name under BS2000/OSD Batch and TIAM

• Printer Name under CICS

• Printer Name under Com-plete

• Printer Name under Com-plete/SMARTS

• Printer Names under Natural Advanced Facilities

• Printer Name for Additional Reports and Remote Destinations

• Examples

For an explanation of the symbols used in the syntax diagram, see Syntax Symbols.

Related Statements: AT END OF PAGE | AT TOP OF PAGE | CLOSE PRINTER | DISPLAY | EJECT | FORMAT | NEWPAGE | PRINT | SKIP | SUSPEND IDENTICAL SUPPRESS | WRITE | WRITE TITLE | WRITE TRAILER

Belongs to Function Group: Creation of Output Reports

Function

The DEFINE PRINTER statement is used to assign a symbolic name to a report number and to control the allocation of a report to a logical destination. This provides you with additional flexibility when creating output for various logical print queues.

When this statement is executed and the specified printer is already open, the statement will implicitly cause that printer to be closed. To explicitly close a printer, however, you should use the CLOSE PRINTER statement.

For further information on the DEFINE PRINTER statement, see Unicode and Code Page Support in the Natural Programming Language, section Statements.

Syntax Description

Operand Definition Table:

Syntax Element Description:

Spooling System Parameters

With the following clauses, you can provide values for parameters of the TP monitor's spooling system. The default value of these clauses can be set with the corresponding keyword subparameters of profile parameter PRINT. See PRINT Keyword Subparameters for DEFINE PRINTER Statement in the Parameter Reference.

When a printer is closed, all options are reset to their default values. If the definitions are not clear in a Natural environment, Software AG recommends to set them in each module using DEFINE PRINTER statement.

Syntax Element Description:

Printer Name under z/OS Batch, TSO and Server

This section covers the following topics:

• Logical Data Set Names

• Physical Data Set Names

• HFS File

• JES Spool File Class

• NULLFILE

• Allocation and De-Allocation of Data Sets

• Print Files in Server Environments

For a printer number that is defined with access method AM=STD, you can use operand1 to specify a logical or a physical data set name to be assigned to that printer number.

operand1 can be 1 to 253 characters long and can be one of the following:

• a logical data set name (DD name, 1 to 8 characters);

• a physical data set name of a cataloged data set (1 to 44 characters), or a physical data set member name (1 to 44 characters for the data set name, plus 1 to 8 characters in parentheses for the member name);

• a path name and member name of an HFS file (1 to 253 characters) in an MVS UNIX Services environment;

• a JES spool file class;

• NULLFILE (to indicate a dummy data set).

Logical Data Set Names

For example:

DEFINE PRINTER (21) OUTPUT 'SYSPRINT'

The specified data set with DD-name SYSPRINT must have been allocated before the DEFINE PRINTER statement is executed. For further information, see Allocation and De-Allocation of Data Sets.

The allocation can be done via JCL, CLIST (TSO) or dynamic allocation (SVC 99). For dynamic allocation you can use the application programming interface USR2021N in library SYSEXT.

The data set name specified in the DEFINE PRINTER statement overrides the name specified with the keyword subparameter DEST of profile parameter PRINT.

Optionally, the data set name may be prefixed by DDN= to indicate that it is a DD-name and to avoid name conflicts with additional reports. For example:

DEFINE PRINTER (22) OUTPUT 'DDN=SOURCE'

Physical Data Set Names

For example:

DEFINE PRINTER (23) OUTPUT 'TEST.PRINT.FILE'

The specified data set must exist in cataloged form. When the DEFINE PRINTER statement is executed, the data set is allocated dynamically by SVC 99 with the current DD-name and JCL option DISP=SHR. For further information, see Allocation and De-Allocation of Data Sets.

If the data set name is 8 characters or shorter and does not contain a period (.), it might be misinterpreted as a DD-name. To avoid this, prefix the name with DSN=. For example:

DEFINE PRINTER (22) OUTPUT 'DSN=PRINTXYZ'

If the data set is a PDS member, you specify the PDS member name (1 to 8 characters) in parentheses after the data set name (1 to 44 characters). For example:

DEFINE PRINTER (4) OUTPUT 'TEST.PRINT.PDS(TEST1)'

If the specified member does not exist, a new member of that name will be created.

HFS File

For example:

DEFINE PRINTER (14) OUTPUT '/u/nat/rec/test.txt'

The specified path name must exist. When the DEFINE PRINTER statement is executed, the HFS file is allocated dynamically. If the specified member does not exist, a new member of that name will be created.

For the dynamic allocation of the data set, the following z/OS path options are used:

PATHOPTS=(OCREAT,OTRUNC,ORDWR)
PATHMODE=(SIRUSR,SIWUSR,SIRGRP,SIWGRP)
FILEDATA=TEXT

When an HFS file is closed, it is automatically de-allocated by z/OS (regardless of the setting of keyword subparameter FREE of profile parameter PRINT).

JES Spool File Class

To create a JES spool data set, you specify SYSOUT=x (where x is the desired spool file class). For the default spool file class, you specify SYSOUT=*.

Examples:

DEFINE PRINTER (10) OUTPUT 'SYSOUT=A'
DEFINE PRINTER (12) OUTPUT 'SYSOUT=*'

To specify additional parameters for the dynamic allocation, use application programming interface USR2021N in library SYSEXT instead of the DEFINE PRINTER statement.

NULLFILE

To allocate a dummy data set, you specify NULLFILE as operand1:

DEFINE PRINTER (n) OUTPUT 'NULLFILE

This corresponds to the JCL definition:

// DD-name DD DUMMY

Allocation and De-Allocation of Data Sets

When the DEFINE PRINTER statement is executed and a physical data set name, HFS file, spool file class or dummy data set has been specified, the corresponding data set is allocated dynamically. If the logical print file is already open, it will be closed automatically, except when the keyword subparameter CLOSE=FIN (Time of Closure) of profile parameter PRINT has been specified, in which case an error will be issued. Moreover, an existing data set allocated with the same current DD-name is automatically de-allocated before the new data set is allocated.

To avoid unnecessary overhead by unsuccessful premature opening of print files not yet allocated at the start of the program, print files should be defined with keyword subparameter OPEN=ACC (open at first access) of profile parameter PRINT.

In the case of an HFS file, or a print file defined with the keyword subparameter FREE=ON of profile parameter PRINT, the print file is automatically de-allocated as soon as it has been closed.

As an alternative for the dynamic allocation and de-allocation of data sets, the application programming interface USR2021N in library SYSEXT is provided. This API also allows you to specify additional parameters for dynamic allocation.

Print Files in Server Environments

In server environments, errors may occur if multiple Natural sessions attempt to allocate or open a data set with the same DD-name. To avoid this, you either specify the print file with keyword subparameter DEST=* of profile parameter PRINT, or you specify OUTPUT '*' in the DEFINE PRINTER statement; Natural then generates a unique DD-name at the physical data set allocation when the first DEFINE PRINTER statement for that print file is executed.

All print files whose DD-names begin with CM are shared by all sessions in a server environment. A shared print file is opened by the first session, and is physically closed when the server is terminated. For further information, see the section Natural as a Server in the Operations documentation.

Printer Name under z/VSE Batch

For a printer number that is defined with the access method AM=STD, operand1 can be:

• a logical data set name (DD-name, 1 to 7 characters);

• NULLFILE (to indicate a dummy data set).

Logical Data Set Names

Example:

DEFINE PRINTER (2) OUTPUT 'SYSOUT1'

The specified data set SYSOUT1 must have been defined in the JCL or in the z/VSE standard or partition labels.

The data set name specified in the DEFINE PRINTER statement overrides the name specified with keyword subparameter DEST of the PRINT profile parameter.

Optionally, the data set name may be prefixed by DDN= to indicate that it is a DD-name. For example:

DEFINE PRINTER (5) OUTPUT 'DDN=MYPRINT'

NULLFILE

To allocate a dummy data set, you specify NULLFILE as operand1:

DEFINE PRINTER (n) OUTPUT 'NULLFILE

Printer Name under BS2000/OSD Batch and TIAM

For a printer number that is defined with the access method AM=STD, you can use operand1 to specify a file name, link name or system file that is allocated to this printer number.

In this case, operand1 can have a length of from 1 to 253 characters and one of the following meanings:

• Link Name

• File Name

• Generic File Name

• File Name and Link Name

• Generic File Name and Link Name

• System File SYSOUT

• System File SYSLST

• System File SYSLSTnn - nn=01,...,99

• System File SYSLSTnn with Implicit Allocation

• *DUMMY

The following rules apply:

1. File name and link name can be specified as positional parameters or keyword parameters. The corresponding keywords are FILE= and LINK=. Mixing positional and keyword parameters is allowed but not recommended.

2. A string with a length of 1 to 8 characters without commas is interpreted as a link name. This notation is compatible with earlier versions of Natural. Example:

   DEFINE PRINTER (1) OUTPUT 'P01'

   The corresponding definition with a keyword subparameter is:

   DEFINE PRINTER (1) OUTPUT 'LINK=P01'

3. A string of 9 to 54 characters without commas is interpreted as a file name. Example:

   DEFINE PRINTER (2) OUTPUT 'NATURALvr.TEST.PRINTER02'

   where vr represents the relevant product version.

   The corresponding definition with a keyword subparameter is:

   DEFINE PRINTER (2) OUTPUT 'FILE=NATURALvr.TEST.PRINTER02

4. The following input is interpreted without considering the length and therefore forms exceptions to Rules 2 and 3:

   • keyword input: LINK=, FILE=

   • *DUMMY

   • NULLFILE (equivalent to *DUMMY)

   • *

   • *,*

   • SYSOUT

   • SYSLST or SYSLST(nn)

   Example: DEFINE PRINTER (7) OUTPUT 'FILE=Y' is a valid file allocation and not a link name, although the string of characters contains fewer than 9 characters.

5. Generic file names are formed as follows:

   pnn.userid.tsn.date.time.number

   where

   nn	is a report number
   userid	is a Natural user-ID, 8 characters
   tsn	is the BS2000/OSD TSN of the current task, 4 digits
   date	is DDMMYYYY
   time	is HHIISS
   number	is a sequential number, 5 digits

6. Generic link names are formed as follows:

   NPFnnnnn

   where nnnnn is a 5-digit number that is increased by one after every generation of a dynamic link name.

7. Changing the file allocation for a printer number causes an implicit CLOSE of the print file allocated so far.

You are strongly recommended, in all cases except when you only specify a link name (for example: P01), to work with keyword parameters. This avoids conflicts of names with additional reports and is essential for file names with fewer than 9 characters.

Examples:

DEFINE PRINTER (1) OUTPUT 'LINK=SOURCE'
DEFINE PRINTER (1) OUTPUT 'FILE=SOURCE'
DEFINE PRINTER (1) OUTPUT 'SOURCE'

Link Name

Example:

DEFINE PRINTER (1) OUTPUT 'LINKP01'

means the same as

DEFINE PRINTER (1) OUTPUT 'LINK=LINKP01'

A file with the link LINKP01 must exist at runtime. This can be created either by using JCL before starting Natural or by dynamic allocation from the current application. For dynamic allocation, the application programming interface USR2029 in the library can be used. If, before execution, the link was active as a destination to another file, for example P01, this will be released or retained depending on the value of the keyword subparameter FREE of profile parameter PRINT (possible values are ON and OFF). Release is done via an explicit RELEASE call to the BS2000/OSD command processor.

File Name

Example:

DEFINE PRINTER (2) OUTPUT 'NATURALvr.TEST.PRINTER02'

where vr represents the relevant product version.

means the same as

DEFINE PRINTER (2) OUTPUT 'FILE=NATURALvr.TEST.PRINTER02'

The file specified in operand1 is set up using a FILE macro call and inherits the link name that was valid for the corresponding print file before execution of the DEFINE PRINTER statement.

Generic File Name

Example:

DEFINE PRINTER (21) OUTPUT '*'

means the same as

DEFINE PRINTER (21) OUTPUT 'FILE=*'

A file with a name created according to Rule 4 is set up using a FILE macro call and inherits the link name that was valid for the corresponding print file before execution of the DEFINE PRINTER statement.

DEFINE PRINTER (22) OUTPUT 'FILE=*,LINK=GENFLK22'

A file with a name created according to Rule 4 is set up with the specified link name using a FILE macro call.

File Name and Link Name

Example:

DEFINE PRINTER (11) OUTPUT 'NATURALvr.TEST.PRINTER11,LNKP11'

where vr represents the relevant product version.

means the same as

DEFINE PRINTER (11) OUTPUT 'FILE=NATURALvr.TEST.PRINTER11,LINK=LNKP11'

which means the same as

DEFINE PRINTER (11) OUTPUT 'FILE=NATURALvr.TEST.PRINTER11,LNKP11'

The file specified in operand1 is set up with the specified link name using a FILE macro call and allocated to the corresponding printer number.

Generic File Name and Link Name

Example:

DEFINE PRINTER (27) OUTPUT '*,*'

means the same as

DEFINE PRINTER (27) OUTPUT 'FILE=*,LINK=*'

A file with a file name and link name created according to Rule 4 and Rule 5 is set up using a FILE macro call and allocated to the specified printer number (27).

Note:
When file name and link name are specified, the previous link name is not released, regardless of the value of keyword subparameter FREE of profile parameter PRINT.

System File SYSOUT

Example:

DEFINE PRINTER (14) OUTPUT 'SYSOUT'

Report 14 is written to SYSOUT.

Under TIAM: SYSOUT is by default output on the screen.

System File SYSLST

Example:

DEFINE PRINTER (15) OUTPUT 'SYSLST'

Report 15 is written to the system file SYSLST.

System File SYSLSTnn - nn=01,...,99

Example:

DEFINE PRINTER (16) OUTPUT 'SYSLST16'

Report 16 is written to the system file SYSLST16.

System File SYSLSTnn with Implicit Allocation

Examples:

DEFINE PRINTER (11) OUTPUT 'SYSLST=LST.PRINTER11'

The system file SYSLST is allocated to the file LST.PRINTER11; Report 11 is written to the system file SYSLST.

DEFINE PRINTER (13) OUTPUT 'SYSLST13=LST.PRINTER13'

The system file SYSLST13 is allocated to the file LST.PRINTER13; Report 13 is written to the system file SYSLST13.

DEFINE PRINTER (19) OUTPUT 'SYSLST19=*'

The system file SYSLST19 is allocated to a file with a name generated according to Rule 4; Report 19 is written to the system file SYSLST19.

Printer Name under CICS

For a printer number defined with the access method AM=CICS, operand1 can be a transient data or temporary storage queue name (1 to 8 characters), depending on keyword subparameter TYPE of profile parameter PRINT for the printer. For TYPE=TD (transient data), only the first 4 characters of operand1 are honored and the transient data destination must be predefined to CICS.

For further information, see also Natural Print and Work Files under CICS (in the TP Monitor Interfaces documentation).

Printer Name under Com-plete

With AM=COMP, a valid printer number (TID) or a logical printer name can be assigned. For example:

DEFINE PRINTER (1) OUTPUT '11'
DEFINE PRINTER (2) OUTPUT 'P102'

Printer Name under Com-plete/SMARTS

With AM=SMARTS, any printer name can be assigned. For example:

DEFINE PRINTER (14) OUTPUT '/nat/path/printer'
DEFINE PRINTER (14) OUTPUT '/nat/path/printer/file/'
DEFINE PRINTER (14) OUTPUT 'printer'

It depends on the MOUNT_FS parameter of SMARTS whether the file is located on a SMARTS portable file system or on the native file system. The first element of the path (/nat/) determines the target file system.

If the string is terminated with a slash (/), the last element is taken as the name of the print file. Otherwise, the name of the file is generated from the UserID and a sequence number. If the string does not start with a slash, the path of the file is taken from the environment variable $NAT_PRINT_ROOT.

The specified path name must exist. When the DEFINE PRINTER statement is executed, the file is allocated dynamically. If the specified member does not exist, a new member of that name will be created.

Printer Names under Natural Advanced Facilities

For Natural Advanced Facilities users, the name of any predefined logical printer profile can be specified. This logical printer profile needs not belong to the currently active user profile. It may be any logical printer profile defined on the NATSPOOL file. It will be active only for the duration of the Natural program which contains the DEFINE PRINTER statement. For further information, see the Natural Advanced Facilities documentation.

Printer Name for Additional Reports and Remote Destinations

Additional reports and remote print destinations can be assigned by default with the following names:

Printing Data in a Remote JES Environment

You can use the write-to-spool file feature (see the Operations documentation) to route data through a remote JES node and send it to a user or print it on a device defined in the remote JES environment.

Examples

• Example 1 - Printer Name Definition for Com-plete

• Example 2 - Printer Name Definition for Batch Environment

• Example 3 - Print Output to Infoline

• Example 4 - Using a Session with Predefined Printer

Example 1 - Printer Name Definition for Com-plete

/* PRINTER NAME DEFINITION FOR COM-PLETE
*
DEFINE PRINTER (1) OUTPUT 'TID100'
WRITE (1) 'PRINTED ON PRINTER TID100'  
END

Example 2 - Printer Name Definition for Batch Environment

/* OUTPUT ON 'SYSPRINT' (FOR BATCH ENVIRONMENTS)
*
DEFINE PRINTER (REPORT1 = 1) OUTPUT 'SYSPRINT'
WRITE (REPORT1) 'REPORT 1 PRINTED ON PRINTER SYSPRINT'  
*
/* OUTPUT TO DEFAULT PRINTER DESTINATION
/* DEFINED WITH PROFILE PARAMETER 'PRINT', SUBPARAMETER 'DEST'
*
DEFINE PRINTER (REPORT2 = 2)
WRITE (REPORT2) 'REPORT PRINTED TO DESTINATION'

Example 3 - Print Output to Infoline

** Example 'DPIEX1': DEFINE PRINTER                                     
************************************************************************
*                                                                       
SET CONTROL 'XI+'        /* SWITCH INFOLINE MODE ON                     
SET CONTROL 'XT'         /* INFOLINE TOP                                
*                                                                       
DEFINE PRINTER (1) OUTPUT 'INFOLINE'                                   
WRITE (1) 'EXECUTING' *PROGRAM 'BY' *INIT-USER                          
WRITE 'TEST OUTPUT'                                                     
EJECT                    /* FORCE PHYSICAL I/O                          
*                                                                       
SET CONTROL 'X'          /* SWITCH BACK TO NORMAL                       
*                                                                       
END

Output of Program DPIEX1:

EXECUTING DPIEX1   BY HTR
Page      1                                                  05-01-13  14:54:33
TEST OUTPUT

Example 4 - Using a Session with Predefined Printer

** Example 'DPREX1': DEFINE PRINTER                                     
************************************************************************
DEFINE DATA LOCAL                                                       
1 EMPL-VIEW VIEW OF EMPLOYEES                                           
  2 NAME                                                                
END-DEFINE                                                              
*                                                                       
*  USE SESSION WITH DEFINED PRINTER 1                                   
*                                                                       
DEFINE PRINTER (INVOICE-LIST=1) OUTPUT 'OUTQ1'                         
LIMIT 5                                                                 
READ EMPL-VIEW BY NAME                                                  
  WRITE (INVOICE-LIST) NAME                                             
END-READ                                                                
*                                                                       
END

www.softwareag.com

Copyright © 1979-2015 Software AG, Darmstadt, Germany.

SEARCH   CONTENTS   |   PDF BOOKS   |   HOME   UP   PREV   NEXT