This section describes the parameters relevant for SMA usage under z/VSE.
Note:
In this section, the term "tape" represents any
installation media (e.g. tape and CD-ROM) supported by Software AG. The
information provided here applies to the use of any of these
media.
Global parameters will be used in skeletons SMA-COMMIT, ZAP-COMMIT, TABLOAD2 and SMA-GENERATE-JCL by default. You can modify global parameter settings using the SMA function Administration > Global Parameters.
Parameter Name | Default Value | Function |
---|---|---|
VSE-DB-ID | 1 | DBID of the Adabas database |
VSE-DB-DEVICE | 3390 | Device type of the Adabas database |
VSE-DEV-CLASS | 182 | address of tape device |
VSE-DSN-ADA-LIB | SAGLIB.ADALIB | Name of sublibrary for Adabas |
VSE-DSN-USER-LIB | SAGLIB.USRLIB | Name of the sublibrary containing the executable batch-mode Natural module |
VSE-JOB-CLASS | 0 | Job class |
VSE-JOB-DISP | D | Job disposition |
VSE-LST-CLASS | Q | List class |
VSE-LIB-GROUP | SAGLIB | Name of the library group used as
default, when generating the tape copy job from the SMA Tape menu. If the copy
job is generated from the user environment, the
LIB-GROUP parm from the user environment is used
instead.
|
VSE-LST-DISP | D | List disposition |
VSE-NAT-BATCH | NATBAT | Name of the executable batch-mode Natural module |
VSE-SVC | 43 | SVC number for Adabas |
These global parameters are used in skeleton SMA-GENERATE-JCL.
Parameter Name | Default Value | Function |
---|---|---|
VSE-CMWKF02 | SMA.WORK02 | Name of work data set 2 |
VSE-CMWKF02-EXT | 1,50 | Extent of work data set 2 |
VSE-CMWKF02-VOL | VOL001 | Volser of disk containing work data set |
You may need to adapt the following SMA parameters to meet your site's requirements. Find the following parameters in your SMA environment (Groups BASIC and OPTION). You can change these parameters in the VSE/SP default environment if you want to use them as default values for all other user environments.
These parameters are related to SMA library usage. See also the section Concepts, Library Organization.
Parameter Name | Default Value | Function |
---|---|---|
LIB-GROUP | SAGLIB | Label of the standard library for SAG products |
LIB-VOL | VVVVVV | Default volume of the library for SAG products |
LIBRARY | SMA.SAGLIBRARY | The standard library name for SAG products |
Parameter Name | Default Value | Function |
---|---|---|
DSNPUNCH1 | SMA.SYSPCH.ONE | Data set name of the first work data set for SYSPCH |
DSNPUNCH2 | SMA.SYSPCH.TWO | Data set name of the second work data set for SYSPCH |
DSNPUNCH3 | SMA.SYSPCH.THREE | Data set name of the third work data set for SYSPCH |
DYNCLASS | C | Specify dynamic job class for job card (if dynamic class required) |
ESA-31BIT | blank | Must be set to Y if Natural is to be used in 31-bit mode under z/VSE. Blank otherwise. |
EXTPUNCH1 | 1,150 | Extent of the first work data set in conjunction with CA DYNAM/D. A value of 1 may be defined for starttrck. |
EXTPUNCH2 | 1,150 | Extent of the first work data set in conjunction with CA DYNAM/D. A value of 1 may be defined for starttrck. |
EXTPUNCH3 | 1,150 | Extent of the first work data set in conjunction with CA DYNAM/D. A value of 1 may be defined for starttrck. |
H-ASM | N | Must be set to Y if H-Assembler is to be used |
SLILIB | PRD2.PROD | Sublibary of z/VSE system library containing SLI books |
SYSIPT | FEC | Physical unit address of SYSIPT |
SYSPCH | FED | Physical unit address of SYSPCH |
USRLIB | USRLIB | User load library (sublib) for SAG products. SMA will link all user-specific phases into this sublib. |
VOLPUNCH1 | VVVVVV | Volume of the first work data set for assemblies and some utilities. SMA requires a sequential work file on disk. In conjunction with CA DYNAM/D, a pool-name may be defined here. |
VOLPUNCH2 | VVVVVV | Volume of the second work data set for assemblies and some utilities. SMA requires a sequential work file on disk. In conjunction with CA DYNAM/D, a pool-name may be defined here. |
VOLPUNCH3 | VVVVVV | Volume of the third work data set for assemblies and some utilities. SMA requires a sequential work file on disk. In conjunction with CA DYNAM/D, a pool-name may be defined here. |
VTAPE | N | Use value Y for Virtual Tape Support in your environment. Otherwise use value N. |
VTAPE-CDROM | D: | CD-ROM device used for virtual tape server |
VTAPE-PORT | 2386 | Port number of virtual tape server |
VTAPE-TCPIP-ADDR | 111.111.111.111 | TCPIP address of virtual tape server |
VTAPE-UNIT | 192 | CUU of virtual tape device |
Parameter Name | Default Value | Function |
---|---|---|
DEV-CLASS | CUU | Physical unit address of the tape device |
DISPOSITION | D | Disposition on job statement |
JOB-PREFIX | SMA | Job name prefix of SAG installation jobs, first 3 characters of job name |
JOBCLASS | 0 | Job class on job statement |
LISTCLASS | Q | Power list class for job output |
LISTDESTINATION | * | List destination (VM) on job statement |
LISTDISPOSITION | D | Power list disposition for job output |
Parameter Name | Default Value | Function |
---|---|---|
ADA-ENHANCED-INST | N | Use value Y for enhanced Adabas installation. Use value N for standard Adabas installation. |
CICLIB | CICLIB | User load library (SUBLIB) for CICS-installed products |
CICS-SUBLIB | PRD2.PROD | CICS sublibrary ofz/VSE system library |
CICS-TS1-1 | N | Use value Y for CICS/TS1.1. Use value N for old CICS/VS 2.3. |
CICS2-2 | Y | CICS uses 31-bit addressing. Use value
N if CICS version is below 2.2 or the parameter
CICS-TS1-1 is set to Y.
|
Parameter Name | Default Value | Function |
---|---|---|
VSAM-UCAT | UCATT | Short name of VSAM user catalog (has to be in standard labels) |
VSAM-UCATVOLUMES | SYSWK1 | Volumes containing the VSAM user catalog |
VSAM-USERCATALOG | VSESP.USER.CATALOG.TEST | Long name of VSAM user catalog (has to be in standard labels) |