Most Predict functions can be used either online or in batch mode. Batch mode is useful
when processing a large number of objects
when redocumenting entire libraries
when reports are created regularly, for example with the same restrictions and output options.
This section covers the following topics:
Most commands are described in the section Predict Commands in the Predict Reference documentation.
For generation, incorporation and comparison functions: the valid keywords depend on the type of external object and are listed in the appropriate section of this documentation.
For Coordinator functions: in the section Data Transfer Examples in the Predict Coordinator documentation.
For conversion functions: in the section Converting Dictionary Data in Batch Mode.
For LIST XREF commands: in the
section LIST
XREF Commands in the Predict Reference
documentation.
Keywords are also listed in the help text displayed by entering ? in the first input field of a particular function, for example Object ID for generation functions, or Retrieval type for retrieval functions. Command descriptions can easily be found using the index.
This section contains:
The following functions can be performed in batch mode.
All generation functions. See the section Generation in the External Objects in Predict documentation.
Punch out previously generated code command:
PUNCH or WRITE. See the
section Predict
Commands in the Predict Reference
documentation.
All comparison functions. See the section Comparison in the External Objects in Predict documentation.
All incorporation functions except Incorporate DDM. See the section Incorporation in the External Objects in Predict documentation.
Produce retrieval reports. See the sections Retrieval, Active Retrieval and LIST XREF for Natural of the Predict Reference documentation.
Execute the preprocessor. See the section Preprocessor in the External Objects in Predict documentation.
File Implementation. See the section File Implementation Plans in the External Objects in Predict documentation.
The following special functions. See the section Special Functions.
Delete old sets
Reposition implementation data
Recover
Consistency of Predict
Conversion Functions (Library SYSDICCO)
Convert Predict data. See the section
Conversion.
Coordinator Functions (Library SYSDICBE)
Unload/load Predict data. See the
Predict Coordinator
documentation.
Metadata Administration Functions (Library
SYSDICMA)
All metadata administration functions must be performed
online.
LIST XREF Functions
See the the section
LIST XREF
Commands in the Predict Reference
documentation.
Not all functions are available on all operating systems. This section lists the operating systems in which Predict can be run and lists any restrictions that apply to the particular operating system.
z/OS, z/VSE, BS2000, CMS
All Predict commands available in batch mode can be used.
For some functions, work files or reports must be specified. The names of these
files and the record format/length depend on the operating system and are given
in the section
Natural
Workfiles and Additional Reports in Batch Mode.
UNIX
See the Natural documentation on installation and
operation.
This section contains:
To execute Predict functions in batch mode, a Natural batch session must be started. The following Natural parameters should always be set:
MAXCL=0 CC=OFF INTENS=1 LANG=1 MADIO=0
When entering commands in batch mode, do not specify any profile parameters which influence the system variable *DEVICE.
For example: If you specify PC=ON, the system variable *DEVICE=PC will be set.
Predict functions that can be performed in batch mode are located in libraries SYSDIC, SYSDICBE or SYSDICCO. See Overview of Possible Functions.
Logon to the required library with the command:
LOGON <library>
or, if you are working with Natural Security,
LOGON <library><user-ID><password>
Then code the following command to put Predict into the required state for processing batch commands:
MENU
There are two commands to terminate your Predict/Natural session. With both commands, global variables are reset, but values in the Predict hot object table remain.
FIN
The FIN command terminates the
Predict/Natural session.
END or.
The END or
. command will perform a logoff in Natural Security
if no command is on the stack, and the input mode is set to forms mode (IM=F).
The other parameters are not altered.
Any number of Predict commands may be coded between
MENU and FIN or
END. The batch mode commands are the same as the
Predict commands in online mode. The following rules apply:
In z/OS, z/VSE and BS2000 environments, input is read in fixed-length format of 80-character records. The last 8 characters are ignored.
Input mode is always delimiter mode (Natural profile parameter
IM=D).
If the parameters will not fit in one record, the last parameter in the record must be followed by a percent character (%). Parameters in the next line are then concatenated.
If entering commands in keyword form (see below), an assign character is used to separate the keyword and the parameter value. There must be no blanks between keyword, assign character and parameter value. Throughout the documentations, an equals sign (=) is used as the assign character.
You can change the assign character with the Natural parameter
IA.
Input parameters may be separated by blanks or by the input delimiter character. Throughout the documentations, a comma is used as the delimiter character.
You can change the input delimiter with the Natural parameter
ID.
Comments in batch jobs must be proceeded with an asterisk.
With most commands the command parameters are entered in the same line as the command word. With the commands listed below, however, parameters are entered in the line(s) following the command.
GENERATE ...
COMPARE ... (with I option)
INCORPORATE ...
IMPLEMENT FILE
SPECIAL ...
For example:
GENERATE COBOL FILE-ID=TEST-FILE,REPLACE=Y,PREFIX=NEW-
Note:
To generate an external object using the generation
defaults, code the file ID in the same line as the command. No other parameters
can be specified.
For example:
GENERATE COBOL TEST-FILE
Most commands can be entered in keyword form, positional form or a mixture of both. Positional form is obtained by omitting the keywords and the Natural assign character.
COMMAND KEY1=value1,KEY2=value2,KEY3=value3
or, if parameter 2 is omitted:
COMMAND KEY1=value1,KEY3=value3,KEY4=value4
COMMAND value1,value2,value3
or, if parameter 2 is omitted:
COMMAND value1,,value3,value4
The keyword and positional form of specifying command parameters can be mixed.
COMMAND KEY5=value5,value6,,value8
Some functions (for example generation, migration, incorporation, active references and preprocessor functions) may return condition codes. A non-zero condition code can terminate processing without executing any subsequent commands.
| Code | Meaning |
|---|---|
| 0 | Function completed normally. |
| 4 | Either Natural detected an error condition or at least one Predict command ended with a warning. |
| 8 | Natural could not be started. This condition code does not originate in Predict. |
| 101 | Generation warnings. An error condition was detected during the generation of record layouts and/or the format buffer which gave rise to a warning message. |
| 103 | Invalid statement found. An invalid Predict preprocessor statement was found. The preprocessor continues. |
| 106 | Functions in the implementation plan were executed with errors or terminated abnormally, or the plan contains at least one generation task that already failed or could not be executed (status impossible). |
| 107 |
External object has not been generated or no code has been saved/generated (the requested code has not been included in the output file). For example, the generation function fails or the Copy Code must be regenerated before it can be included by the preprocessor. |
| 109 | Storage overflow in extended buffer. Increase the
Natural parameter ESIZE.
|
| 110 | The data dictionary administrator has specified that all programs must be documented in Predict. The preprocessor detected that a Predict program object documenting the program does not exist. The program is not processed. |
| 111 | The preprocessor could not be started. The specified input file could not be found. |
| 112 | Program name not found by preprocessor. |
| 115 | An error occurred. Detailed message is written to report 0. |
| 117 | Invalid command, or function not allowed in batch mode (FILOB, PUNCH). |
Note:
If several commands are executed and one of these commands
causes an error, Predict will continue processing the remaining commands until
a FIN command is executed. Predict then returns
condition code 115.
Predict condition codes can be evaluated under BS2000. The following is required:
The BS2000 facility "Job Variables" must be installed.
The SET parameter "&JV" in the Natural BS2000 batch driver NATBS2 must be set.
The job variable used for the condition code must be
declared in the Predict batch job with the link name *NATB2JV. The necessary
DECLARE statement looks as follows: /DCLJV
NATBJV,LINK=*NATB2JV
Note:
See the Natural Operations
documentation for Mainframes for more information.
For some batch commands, workfiles or additional reports must be defined.
This section contains:
The following commands write output to Natural workfile 1:
GENERATE (if Punch/output is set
to Y), also if generation commands are called from an implementation plan.
PUNCH / WRITE
| Description | DD Name | BS2000 Link Name | Record | |
|---|---|---|---|---|
| Format | Length | |||
| Generated code | CMWKF01 | W01 | F or FB | 80 |
| V or VB | min. 80 | |||
Note:
When generating ADAFDU definitions with function Generate
ADACMP/ADAWAN definitions in batch mode with parameter Punch / Output set to Y
for one of the following Adabas versions:
any version starting with U,
V3 and above or
P2 and above,
we recommend setting the record format to V or VB with a record length of 250. Otherwise data may be truncated.
The PREPROCESS command requires the
first three Natural workfiles:
| Description | DD Name | BS2000 Link Name | Record | |
|---|---|---|---|---|
| Format | Length | |||
| Input data set for Preprocessor | CMWKF01 | W01 | F or FB | 80 |
| Output data set | CMWKF02 | W02 | F or FB | 80 |
| Temporary workfile | CMWKF03 | W03 | F or FB | 91 |
The preprocessor produces three types of output on the first three Natural reports:
| Description | DD Name | BS2000 Link Name | Record | |
|---|---|---|---|---|
| Format | Length | |||
| Report whether run was successful or not | CMPRT01 | P01 | F or FB | 91 |
| A list of preprocessor commands found | CMPRT02 | P02 | F or FB | 133 |
| A list of errors | CMPRT03 | P03 | F or FB | 133 |
The INCORPORATE COBOL command
requires the first two Natural workfiles:
Note:
If INPUT-TYPE=I, the copy code is read from the Natural
command input stream and written to workfile 1. If input type=W (default), the
workfile must contain the copy code to be incorporated.
| Description | DD Name | BS2000 Link Name | Record | |
|---|---|---|---|---|
| Format | Length | |||
| Input data set | CMWKF01 | W01 | F, FB, V or VB | 80 |
| Temporary data set | CMWKF02 | W02 | V or VB | at least 44 |
The INCORPORATE COBOL command
produces three types of output on the first three Natural reports:
| Description | DD Name | BS2000 Link Name | Record | |
|---|---|---|---|---|
| Format | Length | |||
| Input data set (COBOL Copy Code) | CMPRT01 | P01 | F or FB | 91 |
| COBOL Copy Code with error messages | CMPRT02 | P02 | ||
| Predict file description | CMPRT03 | P03 | ||
The Coordinator uses the Natural workfiles 1, 5, 6, and 7. See the Predict Coordinator documentation.
| Transfer Medium | DD Name | BS2000 Link Name | Record | |
|---|---|---|---|---|
| Format | Length | |||
| Migrate format |
CMWKF01, |
W01, |
V or VB |
Rec length at least 1796, block size at least 1800 |
| ALF format |
CMWKF01 |
W01, |
V or VB |
Rec length at least 110, block size at least 114 |
The examples throughout the documentation assume that the input delimiter character is set to a comma with the Natural parameter
ID=,
and the input assign character is set to equals with the Natural parameter
IA==
This section contains:
List all child and parent object of all types of files starting with "TEST" and having keyword NEW. 60 lines per page are printed, the report will start with a cover page, and for each object up to 10 abstract lines are displayed. The options will stay in effect for all subsequent retrieval functions.
LOGON SYSDIC MENU SET RESTRICTION KEY=NEW SET OUTPUT PS=60,COVER=Y,ABSTRACT-CUR=10 CHILD FILE ALL TEST* PARENT FILE ALL TEST* FIN
Note:
COMMENT-CUR and COMMENT-REL
can be used as synonyms for ABSTRACT-CUR and
ABSTRACT-REL respectively, so that batch jobs created for earlier
versions are still valid.
Perform retrieval model EX (standard Predict explode) with output mode Cross reference on all Files starting with 'TEST'
LOGON SYSDIC MENU EXECMODEL FILE TEST* MODEL=EX,MODE=X FIN
Note:
In batch mode, you must specify output mode X (Cross
reference) or T (Structured list).
Generate ADACMP cards for the file TEST-FILE in database TEST-DA, save them in member TEST in library WANLIB and punch them to workfile 1.
LOGON SYSDIC MENU GENERATE,ADACMP FILE-ID=TEST-FILE,DB=TEST-DA% <-- Continuation record follows PUNCH=Y,MEM=TEST,LIB=WANLIB
Generate COBOL copy code for file TEST-FILE using default options.
GENERATE,COBOL,TEST-FILE FIN
Process the COBOL source program on workfile 1 with the preprocessor and write XRef data under member name COBTEST in library RBN.
LOGON SYSDIC MENU PREPROCESS,COBOL,COBTEST,RBN FIN
Punch the previously generated copy code member TEST from library WANLIB to workfile 1.
LOGON SYSDIC MENU PUNCH TEST,WANLIB FIN
Execute and then display the implementation plan IMP-TEST.
LOGON SYSDIC MENU IMPLEMENT FILE FUNCTION=X,PLAN-ID=IMP-TEST IMPLEMENT FILE D,IMP-TEST FIN
Create Predict program objects for all members of the Natural library NATTEST and replace existing program objects.
Construct the program IDs from the prefix NAT-, the library name and the member name.
Put all comment lines from the source into the extended description.
Assign to all redocumented program objects the owner NEWREDOC and the keyword NEW.
Link all redocumented programs to the system NATTEST-LIBRARY. Use the library structure TREE to determine the programs used.
LOGON SYSDIC MENU REDOCUMENT PROGRAM PROCESS-OPT=R,LIBRARY=NATTEST,STRUCTURE=TREE,DESCRIPTION=A% DEFAULT-OWNER=NEWREDOC,DEFAULT-KEY1=NEW% SYSTEM=NATTEST-LIBRARY,PREFIX=NAT- FIN
Create a Predict sequential file object from the data definitions in the COBOL copy code member on workfile 1 with prefix PRD-, decimal character set to comma, literal delimiter set to single quote. An existing Predict file with the same name is replaced.
LOGON SYSDIC MENU REDOCUMENT PROGRAM PROCESS-OPT=R,LIBRARY=NATTEST,STRUCTURE=TREE,DESCRIPTION=A% DEFAULT-OWNER=NEWREDOC,DEFAULT-KEY1=NEW% SYSTEM=NATTEST-LIBRARY,PREFIX=NAT- FIN
Create a Predict sequential file object from the data definitions in the COBOL Copy Code member with prefix PRD-, decimal character set to comma, literal delimiter set to single quote. An existing Predict file with the same name is replaced.
LOGON SYSDIC MENU INCORPORATE,COBOL PREFIX=PRD-,DECIMAL-CHAR=C,DELIMITER=',STORE=Y,% REPLACE=Y,INPUT-TYPE=I 000100 01 FI-S-INCCOB-1 000110 02 PE-1 OCCURS 30 TIMES. 000120 03 PE-EL-1 PIC XX. 000130 03 PE-EL-2 PIC X(6). 000140 01 FI-S-INCCOB-2 000150 02 PERSON. 000160 03 CHR-NAME PIC X(32). 000170 03 LST-NAME PIC X(32). 000170 02 DUTY PIC X(25) OCCURS 5. END FIN
Convert the data on the Predict system file from version 4.1 to version 4.2 format.
Convert the Predict objects of type report starting with "REP" and with keyword OLD to objects of type program.
Convert the Predict objects of type module with the prefix MOD* and with keyword OLD to objects of type program.
LOGON SYSDICCO MENU CONVERT VERSION42 CONVERT REPORT REP*,OLD,*,N CONVERT MODULE MOD*,*,OLD,*,N FIN
See the Predict Coordinator documentation for more information.
LOGON SYSDIC MENU ACTIVE XREF *SYSPLI* PROGRAM USING VIEW