The ROWTABLEAREA2 is a container control that allows other controls to be arranged inside its grid management.
The ROWTABLEAREA2 control supports server-side scrolling and sorting. This concept is explained in Server-Side Scrolling and Sorting. An example for the usage of server-side scrolling and sorting with the ROWTABLEAREA2 control is contained in the Natural for Ajax demos.
This document covers the following topics:
There is a grid that contains a header row and 10 lines. Each line contains one check box and two fields. Some of the lines are highlighted.
The XML layout definition is:
<rowarea name="Grid">
<rowtablearea2 griddataprop="lines" rowcount="10" width="100%" withborder="true">
<tr>
<hdist>
</hdist>
<label name="First Name" asheadline="true">
</label>
<label name="Last Name" asheadline="true">
</label>
</tr>
<repeat>
<str valueprop="selected">
<checkbox valueprop="selected" flush="screen" width="30">
</checkbox>
<field valueprop="firstname" width="50%">
</field>
<field valueprop="lastname" width="50%">
</field>
</str>
</repeat>
</rowtablearea2>
<vdist height="10">
</vdist>
<itr>
<button name="Add new Line" method="onAddLine">
</button>
<hdist>
</hdist>
<button name="Remove selected Lines" method="onRemoveLines">
</button>
</itr>
</rowarea>
Note the following:
There is a ROWTABLEAREA2 definition with the property
griddataprop="lines". There is a
rowcount definition of
"10". This is the same as for the text grid
processing: the grid container is bound to a server-side collection. Similar to
the TEXTGRIDSSS2 definition, there is a row count that defines the number of
lines.
Inside the ROWTABLEAREA2 definition, there is first the
definition of a normal table row (TR) in which a distance and two labels are
defined. The labels are rendered with
asheadline="true".
Inside the REPEAT definition, there is a special table row definition "STR" (selectable table row) that itself contains one CHECKBOX and two FIELD definitions. CHECKBOX and FIELDs are bound to properties themselves.
After the ROWTABLEAREA2 definition, there is a vertical distance and a row that contains two buttons with which a user can manipulate the grid.
The content of the REPEAT block is repeated as many times as defined
inside the rowcount definition of ROWTABLEAREA2.
The content holds a table row (STR) - therefore the result is a grid.
In the parameter data area of the adapter, the grid data is represented by the following data structure:
1 LINES (1:*) 2 FIRSTNAME (U) DYNAMIC 2 LASTNAME (U) DYNAMIC 2 SELECTED (L)
If the grid has been configured for server-side scrolling and
sorting, the data structure contains additional fields that control server-side
scrolling and sorting (see below). In order to use server-side scrolling and
sorting, set the property natsss in NATPAGE to
"true".
1 LINES (1:*) 2 FIRSTNAME (U) DYNAMIC 2 LASTNAME (U) DYNAMIC 2 SELECTED (L) 1 LINESINFO 2 ROWCOUNT (I4) 2 SIZE (I4) 2 SORTPROPS (1:*) 3 ASCENDING (L) 3 PROPNAME (U) DYNAMIC 2 TOPINDEX (I4)
value-of-griddataprop.onTopindexChanged
value-of-griddataprop.onFirstPage
(block scrolling only)
value-of-griddataprop.onLastPage
(block scrolling only)
value-of-griddataprop.onPageDown
(block scrolling only)
value-of-griddataprop.onPageUp
(block scrolling only)
value-of-griddataprop.onCtrlSelect
value-of-griddataprop.onSelect
value-of-griddataprop.onShiftSelect
value-of-griddataprop.onSelectAll
value-of-griddataprop.onDeselectAll
value-of-griddataprop.onSort
value-of-griddataprop.reactOnContextMenuRequest
Fields typically contain a high number of FIELD controls. Typically, a FIELD control has a certain rendering that renders a field with a border and with a certain background color.
Be aware that inside the FIELD definition, there are two important properties:
noborder - if set to
"true", no border will be drawn
transparentbackground - if set to
"true", the field will always take over the
background of the controls in which it is positioned (e.g. STR row).
Have a look at the difference between the following screens. One screen uses the properties, the other screen does not use them.
This is a grid:
This is collection of fields:
Columns in a ROWTABLEAREA2 control can be marked as movable so that these columns can be rearranged during execution time. The application program need not be changed.
To enable columns as movable columns, the following prerequisites must be fulfilled:
The header row elements that are to represent movable columns must be defined with GRIDCOLHEADER controls.
A specific column is defined as movable by setting the
movablecol property of the GRIDCOLHEADER control
to "true".
The columns marked as movable must form a consecutive sequence. It is not possible to establish more than one sequence of movable columns within one grid.
When columns are marked as movable, only FIELD and METHODLINK controls are allowed to be used in the table's body definition for the corresponding columns.
The following is an example of a layout definition with movable columns:
<rowarea name="Contents of the LINES structure">
<rowtablearea2 griddataprop="lines" rowcount="15" width="100%"
withborder="true">
<tr>
<label name="No." width="30" asheadline="true">
</label>
<label name="Dept" width="20%" asheadline="true">
</label>
<gridcolheader name="ID" width="20%" propref="id"
withsorticon="false" movablecol="true">
</gridcolheader>
<gridcolheader name="Last Name" width="20%" propref="last"
withsorticon="false" movablecol="true">
</gridcolheader>
<gridcolheader name="First Name" width="20%" propref="first"
withsorticon="false" movablecol="true">
</gridcolheader>
<gridcolheader name="Reference" width="20%" propref="reflink"
withsorticon="false" movablecol="true">
</gridcolheader>
</tr>
<repeat>
<str valueprop="selected">
<selector valueprop="selected" singleselect="false">
</selector>
<treenode3 width="20%" withplusminus="true">
</treenode3>
<field valueprop="id" width="20%" noborder="true">
</field>
<field valueprop="last" width="20%" noborder="true">
</field>
<field valueprop="first" width="20%" noborder="true">
</field>
<methodlink method="reflinkclicked" valueprop="reflink"
width="20%">
</methodlink>
</str>
</repeat>
</rowtablearea2>
</rowarea>
The header row definition of the ROWTABLEAREA2 control contains a
consecutive sequence of four GRIDCOLHEADER controls with the
movablecol property set to
"true". These GRIDCOLHEADER controls correspond to
three FIELD controls and one METHODLINK control in the table's body
definition.
The following functions are supported:
All items are copied to the clipboard. In some versions of Firefox, an additional confirmation pop-up opens, asking you to allow access to the clipboard. In Chrome and Internet Explorer 11/Edge this additional pop-up is not shown.
The selected items are copied to clipboard. Users can select items via the normal multiselect functionality of ROWTABLEAREA2.
All items are written to a .csv (comma separated values) file. The browsers standard dialog for opening or saving a file opens.
The selected items are written to a a .csv
file. Users can select items via the normal multiselect functionality of
ROWTABLEAREA2. Use the properties
withcopytoclipboard,
withselectedtoclipboard,
withexporttofile, and
withselectedtofile to add icons for these
functions to your grid.
The dynamic values of the controls in the grid columns are exported. The columns with the following controls are exported:
field,
checkbox,
combodyn2,
dateinput,
text,
textout,
label,
methodlink,
radiobutton,
combofix.
Additional static text, for example, a label with a static name property, is not exported.
You can add icon bars to the ROWTABLEAREA2 control. BLOCKSCROLLINGBAR is an icon bar which contains the blockscrolling buttons. Use ICONBAR and ICONBARLINE controls to create your own icon bar. The icons TOCLIPBOARDICON and TOFILEICON support the "copy to clipboard" and/or "export to file" functionality,
| Basic | |||
| comment |
Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view. |
Optional | |
| styleclass |
CSS style class used for rendering. |
Optional | |
| float |
If set to left, the bar is rendered on the left of the row. If set to right the bar is rendered at the right of the row. Default is right. |
Optional |
left right inherit |
| Basic | |||
| styleclass |
CSS style class used for rendering. |
Optional | |
| float |
If set to left, the bar is rendered on the left of the row. If set to right the bar is rendered at the right of the row. Default is right. |
Optional |
left right inherit |
| comment |
Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view. |
Optional | |
| Basic | |||
| height |
Height of the control. There are three possibilities to define the height: (A) You do not define a height at all. As consequence the control will be rendered with its default height. If the control is a container control (containing) other controls then the height of the control will follow the height of its content. (B) Pixel sizing: just input a number value (e.g. "20"). (C) Percentage sizing: input a percentage value (e.g. "50%"). Pay attention: percentage sizing will only bring up correct results if the parent element of the control properly defines a height this control can reference. If you specify this control to have a height of 50% then the parent element (e.g. an ITR-row) may itself define a height of "100%". If the parent element does not specify a width then the rendering result may not represent what you expect. |
Optional |
100 150 200 250 300 250 400 50% 100% |
| comment |
Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view. |
Optional | |
| Basic | |||
| image |
URL that points to the image that is shown as icon. The URL either is an absolute URL or a relative URL. If using a relative URL then be aware of that the generated page is located directly inside your project's directory. Example: "images/icon.gif" points to an icon in an images-folder that is parallel to the page itself. "../HTMLBasedGUI/images/new.gif" point to a URL that is located inside a different project. |
Obligatory |
gif jpg jpeg |
| comment |
Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view. |
Optional | |
| imagewidth |
Pixel width of the image that is shown inside the icon. If not defined then the icon is rendered with its normal width. |
Optional |
10 20 40 100 300 |
| imageheight |
Pixel height of the image that is shown inside the icon. If not defined then the icon is rendered with its normal height. |
Optional |
10 20 40 100 300 |
| selectedonly |
If set to true only the selected items of the grid are exported. |
Optional |
true false |
| title |
Text that is shown as tooltip for the control. Either specify the text "hard" by using this TITLE property - or use the TITLETEXTID in order to define a language dependent literal. |
Optional | |
| titletextid |
Text ID that is passed to the multi lanaguage management - representing the tooltip text that is used for the control. |
Optional | |
| testtoolid |
Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification |
Optional | |
| Basic | |||
| image |
URL that points to the image that is shown as icon. The URL either is an absolute URL or a relative URL. If using a relative URL then be aware of that the generated page is located directly inside your project's directory. Example: "images/icon.gif" points to an icon in an images-folder that is parallel to the page itself. "../HTMLBasedGUI/images/new.gif" point to a URL that is located inside a different project. |
Obligatory |
gif jpg jpeg |
| comment |
Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view. |
Optional | |
| imagewidth |
Pixel width of the image that is shown inside the icon. If not defined then the icon is rendered with its normal width. |
Optional |
10 20 40 100 300 |
| imageheight |
Pixel height of the image that is shown inside the icon. If not defined then the icon is rendered with its normal height. |
Optional |
10 20 40 100 300 |
| selectedonly |
If set to true only the selected items of the grid are exported. |
Optional |
true false |
| title |
Text that is shown as tooltip for the control. Either specify the text "hard" by using this TITLE property - or use the TITLETEXTID in order to define a language dependent literal. |
Optional | |
| titletextid |
Text ID that is passed to the multi lanaguage management - representing the tooltip text that is used for the control. |
Optional | |
| testtoolid |
Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification |
Optional | |
| Basic | |||
| griddataprop |
Name of the adapter parameter that represents the control in the adapter. |
Obligatory | |
| rowcount |
Number of rows that are rendered inside the control. There are two ways of using this property - dependent on whether you in addition define the HEIGHT property: If you do NOT define the HEIGHT property then the control is rendered with exactly the number of rows that are defined as ROWCOUNT value. If a HEIGHT value is defined in addition (e.g. as percentage value "100%") then the number of rows depend on the actual height of the control. The ROWCOUNT value in this case indicates the maximum number of rows that are picked from the server. You should define this value in a way so that it is not too low - otherwise your grid will not be fully filled. On the other hand it should not be defined too high ("100") because this causes more communication traffic and more rendering effort inside the browser. |
Optional | |
| height |
Height of the control. There are three possibilities to define the height: (A) You do not define a height at all. As consequence the control will be rendered with its default height. If the control is a container control (containing) other controls then the height of the control will follow the height of its content. (B) Pixel sizing: just input a number value (e.g. "20"). (C) Percentage sizing: input a percentage value (e.g. "50%"). Pay attention: percentage sizing will only bring up correct results if the parent element of the control properly defines a height this control can reference. If you specify this control to have a height of 50% then the parent element (e.g. an ITR-row) may itself define a height of "100%". If the parent element does not specify a width then the rendering result may not represent what you expect. |
Optional |
100 150 200 250 300 250 400 50% 100% |
| width |
Width of the control. There are three possibilities to define the width: (A) You do not define a width at all. In this case the width of the control will either be a default width or - in case of container controls - it will follow the width that is occupied by its content. (B) Pixel sizing: just input a number value (e.g. "100"). (C) Percentage sizing: input a percantage value (e.g. "50%"). Pay attention: percentage sizing will only bring up correct results if the parent element of the control properly defines a width this control can reference. If you specify this control to have a width of 50% then the parent element (e.g. an ITR-row) may itself define a width of "100%". If the parent element does not specify a width then the rendering result may not represent what you expect. |
Sometimes obligatory |
100 120 140 160 180 200 50% 100% |
| firstrowcolwidths |
If set to "true" then the grid is sized according to its first row. This first row typically is a header-TR-row in which GRIDCOLHEADER controls are used as column headers for the subsequent rows. Default is "false", i.e. the grid is sized according to its "whole content". Please note: when using the GRIDCOLHEADER control within the header-TR-row this property must be set to "true" - otherwise column resizing (by drag and drop) does not work correctly. |
Sometimes obligatory |
true false |
| onloadbehaviour |
DEPRECATED: Loading behaviour of the items into the client. "block" (=default). Only "block" is supported´. All other settings are automatically mapped to "block". |
Optional |
block collection collectionorblock |
| comment |
Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view. |
Optional | |
| Appearance | |||
| withborder |
If set to "false" then no thin border is drawn around the controls that are contained in the grid. Default is "true". |
Optional |
true false |
| hscroll |
Definition of the horizontal scrollbar's appearance. You can define that the scrollbars only are shown if the content is exceeding the control's area ("auto"). Or scrollbars can be shown always ("scroll"). Or scrollbars are never shown - and the content is cut ("hidden"). Default is "hidden". |
Optional |
auto scroll hidden |
| vscroll |
Definition of the vertical scrollbar's appearance. You can define that scrollbars only are shown if the content is exceeding the control's area ("auto"). Or scrollbars can be shown always ("scroll"). Or scrollbars are never shown - and the content is cut ("hidden"). Default is "scroll". |
Optional |
auto scroll hidden |
| firstrowcolwidths | (already explained above) | ||
| touchpadinput |
If set to "true" then touch screen icons for scrolling are displayed in addition. Default is "false". |
Optional |
true false |
| requiredheight |
Minimum height of the control in pixels. Use this property to ensure a minimum height if the overall control's height is a percentage of the available space - i.e. if value of property HEIGHT is a percentage (e.g. 100%). Please note:You must not use FIXLAYOUT at the surrounding row container (ITR and ROWAREA). Otherwise: if the available space is less than the required height the end of the control is just cut off. |
Optional |
1 2 3 int-value |
| tablestyle |
CSS style definition that is directly passed into this control. With the style you can individually influence the rendering of the control. You can specify any style sheet expressions. Examples are: border: 1px solid #FF0000 background-color: #808080 You can combine expressions by appending and separating them with a semicolon. Sometimes it is useful to have a look into the generated HTML code in order to know where direct style definitions are applied. Press right mouse-button in your browser and select the "View source" or "View frame's source" function. |
Optional |
background-color: #FF0000 color: #0000FF font-weight: bold |
| darkbackground |
Normally the background is in light colour but the CIS style sheets also have a dark(er) grey colour to be used. If DARKBACKGROUND is set to true then the darker background colour is chosen. This property typically is used to integrate light coloured controls into darker container areas. |
Optional |
true false |
| invisiblemodeincompletelastrow |
If set to "invisible" an incomplete last row is not shown. |
Optional |
invisible visible |
| withsliderfreeze |
Setting this to "true" prevents unwanted slider jumps while scrolling up/down in a grid with a huge number of lines (for example 20000). |
Optional |
true false |
| Features | |||
| clipboardaccess |
If switched to true then the content of the grid can be selected and exported into the client's clipboard. |
Optional |
true false |
| withblockscrolling |
If switched to "true" then the grid will show small scroll icons by which the user can scroll the grid's content. Scrolling typically is done by using the grid's scrollbar - the scroll icons that are switched on by this property are an additional possibility to scroll. |
Optional |
true false |
| withcopytoclipboard |
If set to TRUE a corresponding icon to copy all grid items to the clipboard is added. |
Optional |
true false |
| copytoclipboardtitle |
Text that is shown as tooltip for the control. Either specify the text "hard" by using this TITLE property - or use the TITLETEXTID in order to define a language dependent literal. |
Optional | |
| withselectedtoclipboard |
If set to TRUE a corresponding icon to copy the selected grid items to the clipboard is added. |
Optional |
true false |
| selectedtoclipboardtitle |
Text that is shown as tooltip for the control. Either specify the text "hard" by using this TITLE property - or use the TITLETEXTID in order to define a language dependent literal. |
Optional | |
| withexporttofile |
If set to TRUE a corresponding icon to copy all grid items to a csv file is added. |
Optional |
true false |
| exporttofiletitle |
Text that is shown as tooltip for the control. Either specify the text "hard" by using this TITLE property - or use the TITLETEXTID in order to define a language dependent literal. |
Optional | |
| withselectedtofile |
If set to TRUE a corresponding icon to copy the selected grid items to a csv file is added. |
Optional |
true false |
| selectedtofiletitle |
Text that is shown as tooltip for the control. Either specify the text "hard" by using this TITLE property - or use the TITLETEXTID in order to define a language dependent literal. |
Optional | |
| Binding | |||
| oncontextmenumethod |
Name of the event that is sent to the adapter when the user presses the right mouse button in the grid, but not on an existing row, but in an empty area of the grid. |
Optional | |
| fwdtabkeymethod |
Name of the event that is sent to the adapter when the user presses the TAB key within the very last cell of the grid (last cell within the last line). Use property FWDTABKEYFILTER to associate this call with a grid column. |
Optional | |
| fwdtabkeyfilter |
By default the FWDTABKEYMETHOD is called if the user presses the TAB key within the veryfirst cell of the grid. Input the name of a cell's VALUEPROP to associate the method call with any other column. |
Optional | |
| bwdtabkeymethod |
Name of the event that is sent to the adapter when the user presses SHIFT and TAB keys within the first cell of a grid line. Use property BWDTABKEYFILTER to associate this call with a cell of choice. |
Optional | |
| bwdtabkeyfilter |
By default the BWDTABKEYMETHOD is called if the user presses the SHIFT and TAB keys within the very first cell of the grid. Input the name of a cell's VALUEPROP to associate the method call with any other column. |
Optional | |
| Hot Keys | |||
| hotkeys |
Semicolon separated list of hot keys. A hotkey consists of a list of keys and a method name. Separate the keys by "-" and the method name again with a semicolon Example: ctrl-alt-65;onCtrlAltA;13;onEnter ...defines two hot keys. Method onCtrlAltA is invoked if the user presses Ctrl-Alt-A. Method "onEnter" is called if the user presses the ENTER key. Use the popup help within the Layout Painter to input hot keys. |
Optional | |
| Natural | |||
| njx:natname |
If a Natural variable with a name not valid for Application Designer (for instance #FIELD1) shall be bound to the control, a different name (for instance HFIELD1) can be bound instead. If the original name (in this case #FIELD1) is then specified in this attribute, the original name is generated into the parameter data area of the Natural adapter and a mapping between the two names is generated into the PROCESS PAGE statement of the Natural adapter. This mapping must not break a once defined group structure. If for instance a grid control that is bound to a name of GRID1 contains fields that are bound to FIELD1 and FIELD2 respectively, the corresponding njx:natname values may be #GRID1.#FIELD1 and #GRID1.#FIELD2, but not #GRID1.#FIELD1 and #MYGRID1.#FIELD2. |
Optional | |
| njx:natcomment |
The value of this attribute is generated as comment line into the parameter data area of the Natural adapter, before the field name. The Map Converter, for instance, uses this attributes to indicate for a generated statusprop variable to which field the statusprop belongs. |
Optional | |
STR (selectable table row) is a normal table row (TR) that highlights its background depending on an adapter property.
| Basic | |||
| valueprop |
Name of the adapter parameter that defines if the row is selected or not. |
Obligatory | |
| withalterbackground |
Flag that indicates if the grid line shows alternating background color (like rows within a textgrids). Default is false. Please note: controls inside the row must have transparent background. In case of the FIELD control simply set property TRANSPARENTBACKGROUND to true. |
Optional |
true false |
| showifempty |
Flag that indicates if an unused row is visible. Example: if set to false a grid with rowcount ten and a server side collection size of seven will hide the three remaining rows. Default is false. |
Optional |
true false |
| comment |
Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view. |
Optional | |
| Binding | |||
| valueprop | (already explained above) | ||
| onclickmethod |
Name of the event that is sent to the adapter when the user clicks. |
Optional | |
| alwaysonclick |
If no onclickmethod is defined, this property is ignored. If an onclickmethod is defined and this property is set to false, then the onclickmethod is only called if the clicked control does call a method itself. Example: A click on a button will only call the method defined in the button. Default is true, which means both methods will be called. |
Optional |
true false |
| ondblclickmethod |
Name of the event that is sent to the adapter when the user double clicks. |
Optional | |
| contextmenumethod |
Name of the event that is sent to the adapter when the user presses the right mouse button in an empty area. |
Optional | |
| proprefprop |
Name of the adapter parameter that is filled when the user clicks a FIELD control. The VALUEPROP of the clicked field control will passed. |
Optional | |
| strstyleprop |
Name of the adapter parameter that dynamically provides explicit style information for the control. |
Optional | |
| backgroundcolorprop |
Name of the adapter parameter that dynamically provides the background color for this control. |
Optional | |
| Natural | |||
| njx:natname |
If a Natural variable with a name not valid for Application Designer (for instance #FIELD1) shall be bound to the control, a different name (for instance HFIELD1) can be bound instead. If the original name (in this case #FIELD1) is then specified in this attribute, the original name is generated into the parameter data area of the Natural adapter and a mapping between the two names is generated into the PROCESS PAGE statement of the Natural adapter. This mapping must not break a once defined group structure. If for instance a grid control that is bound to a name of GRID1 contains fields that are bound to FIELD1 and FIELD2 respectively, the corresponding njx:natname values may be #GRID1.#FIELD1 and #GRID1.#FIELD2, but not #GRID1.#FIELD1 and #MYGRID1.#FIELD2. |
Optional | |
| njx:natcv |
Name of a Natural control variable that shall be assigned to the control. |
Optional | |
| njx:natcomment |
The value of this attribute is generated as comment line into the parameter data area of the Natural adapter, before the field name. The Map Converter, for instance, uses this attributes to indicate for a generated statusprop variable to which field the statusprop belongs. |
Optional | |