ROWTABLEAREA2 - The Flexible Control Grid

The ROWTABLEAREA2 is a container control that allows other controls to be arranged inside its grid management.

The ROWTABLEAREA2 control supports server-side scrolling and sorting. This concept is explained in Server-Side Scrolling and Sorting. An example for the usage of server-side scrolling and sorting with the ROWTABLEAREA2 control is contained in the Natural for Ajax demos.

This document covers the following topics:


Example

There is a grid that contains a header row and 10 lines. Each line contains one check box and two fields. Some of the lines are highlighted.

graphics/image129.png

The XML layout definition is:

<rowarea name="Grid">
    <rowtablearea2 griddataprop="lines" rowcount="10" width="100%" withborder="true">
        <tr>
            <hdist>
            </hdist>
            <label name="First Name" asheadline="true">
            </label>
            <label name="Last Name" asheadline="true">
            </label>
        </tr>
        <repeat>
            <str valueprop="selected">
                <checkbox valueprop="selected" flush="screen" width="30">
                </checkbox>
                <field valueprop="firstname" width="50%">
                </field>
                <field valueprop="lastname" width="50%">
                </field>
            </str>
        </repeat>
    </rowtablearea2>
    <vdist height="10">
    </vdist>
    <itr>
        <button name="Add new Line" method="onAddLine">
        </button>
        <hdist>
        </hdist>
        <button name="Remove selected Lines" method="onRemoveLines">
        </button>
    </itr>
</rowarea>

Note the following:

  • There is a ROWTABLEAREA2 definition with the property griddataprop="lines". There is a rowcount definition of "10". This is the same as for the text grid processing: the grid container is bound to a server-side collection. Similar to the TEXTGRIDSSS2 definition, there is a row count that defines the number of lines.

  • Inside the ROWTABLEAREA2 definition, there is first the definition of a normal table row (TR) in which a distance and two labels are defined. The labels are rendered with asheadline="true".

  • Inside the REPEAT definition, there is a special table row definition "STR" (selectable table row) that itself contains one CHECKBOX and two FIELD definitions. CHECKBOX and FIELDs are bound to properties themselves.

  • After the ROWTABLEAREA2 definition, there is a vertical distance and a row that contains two buttons with which a user can manipulate the grid.

The content of the REPEAT block is repeated as many times as defined inside the rowcount definition of ROWTABLEAREA2. The content holds a table row (STR) - therefore the result is a grid.

Adapter Interface

In the parameter data area of the adapter, the grid data is represented by the following data structure:

1 LINES (1:*)
2 FIRSTNAME (U) DYNAMIC
2 LASTNAME (U) DYNAMIC
2 SELECTED (L)

If the grid has been configured for server-side scrolling and sorting, the data structure contains additional fields that control server-side scrolling and sorting (see below). In order to use server-side scrolling and sorting, set the property natsss in NATPAGE to "true".

1 LINES (1:*)
2 FIRSTNAME (U) DYNAMIC
2 LASTNAME (U) DYNAMIC
2 SELECTED (L)
1 LINESINFO 
2 ROWCOUNT (I4)
2 SIZE (I4)
2 SORTPROPS (1:*)
3 ASCENDING (L)
3 PROPNAME (U) DYNAMIC
2 TOPINDEX (I4)

Built-in Events

Scrolling Events (Natural Server-Side Scrolling and Sorting only)

value-of-griddataprop.onTopindexChanged
value-of-griddataprop.onFirstPage (block scrolling only)
value-of-griddataprop.onLastPage (block scrolling only)
value-of-griddataprop.onPageDown (block scrolling only)
value-of-griddataprop.onPageUp (block scrolling only)

Selection Events (Natural Server-Side Scrolling and Sorting only)

value-of-griddataprop.onCtrlSelect
value-of-griddataprop.onSelect
value-of-griddataprop.onShiftSelect
value-of-griddataprop.onSelectAll
value-of-griddataprop.onDeselectAll

Sort Events (Natural Server-Side Scrolling and Sorting only)

value-of-griddataprop.onSort

Context Menu Events

value-of-griddataprop.reactOnContextMenuRequest

Making Grids Look like Grids

Fields typically contain a high number of FIELD controls. Typically, a FIELD control has a certain rendering that renders a field with a border and with a certain background color.

Be aware that inside the FIELD definition, there are two important properties:

  • noborder - if set to "true", no border will be drawn

  • transparentbackground - if set to "true", the field will always take over the background of the controls in which it is positioned (e.g. STR row).

Have a look at the difference between the following screens. One screen uses the properties, the other screen does not use them.

This is a grid:

graphics/rowtablearea2-grid.png

This is collection of fields:

graphics/rowtablearea2-fields.png

Making Columns Movable

Columns in a ROWTABLEAREA2 control can be marked as movable so that these columns can be rearranged during execution time. The application program need not be changed.

To enable columns as movable columns, the following prerequisites must be fulfilled:

  • The header row elements that are to represent movable columns must be defined with GRIDCOLHEADER controls.

  • A specific column is defined as movable by setting the movablecol property of the GRIDCOLHEADER control to "true".

  • The columns marked as movable must form a consecutive sequence. It is not possible to establish more than one sequence of movable columns within one grid.

  • When columns are marked as movable, only FIELD and METHODLINK controls are allowed to be used in the table's body definition for the corresponding columns.

The following is an example of a layout definition with movable columns:

<rowarea name="Contents of the LINES structure">
    <rowtablearea2 griddataprop="lines" rowcount="15" width="100%" 
     withborder="true">
        <tr>
            <label name="No." width="30" asheadline="true">
            </label>
            <label name="Dept" width="20%" asheadline="true">
            </label>
            <gridcolheader name="ID" width="20%" propref="id" 
             withsorticon="false" movablecol="true">
            </gridcolheader>
            <gridcolheader name="Last Name" width="20%" propref="last" 
             withsorticon="false" movablecol="true">
            </gridcolheader>
            <gridcolheader name="First Name" width="20%" propref="first" 
             withsorticon="false" movablecol="true">
            </gridcolheader>
            <gridcolheader name="Reference" width="20%" propref="reflink" 
             withsorticon="false" movablecol="true">
            </gridcolheader>
        </tr>
        <repeat>
            <str valueprop="selected">
                <selector valueprop="selected" singleselect="false">
                </selector>
                <treenode3 width="20%" withplusminus="true">
                </treenode3>
                <field valueprop="id" width="20%" noborder="true">
                </field>
                <field valueprop="last" width="20%" noborder="true">
                </field>
                <field valueprop="first" width="20%" noborder="true">
                </field>
                <methodlink method="reflinkclicked" valueprop="reflink" 
                 width="20%">
                </methodlink>
            </str>
        </repeat>
    </rowtablearea2>
</rowarea>

The header row definition of the ROWTABLEAREA2 control contains a consecutive sequence of four GRIDCOLHEADER controls with the movablecol property set to "true". These GRIDCOLHEADER controls correspond to three FIELD controls and one METHODLINK control in the table's body definition.

Export to Clipboard and File

The following functions are supported:

Copy all Grid Items to the Clipboard

All items are copied to the clipboard. In some versions of Firefox, an additional confirmation pop-up opens, asking you to allow access to the clipboard. In Chrome and Internet Explorer 11/Edge this additional pop-up is not shown.

Copy the Selected Items to the Clipboard

The selected items are copied to clipboard. Users can select items via the normal multiselect functionality of ROWTABLEAREA2.

Export all Grid Items to a File

All items are written to a .csv (comma separated values) file. The browsers standard dialog for opening or saving a file opens.

Export the selected items to a file

The selected items are written to a a .csv file. Users can select items via the normal multiselect functionality of ROWTABLEAREA2. Use the properties withcopytoclipboard, withselectedtoclipboard, withexporttofile, and withselectedtofile to add icons for these functions to your grid.

Example screenshot for clipboard and file export

The dynamic values of the controls in the grid columns are exported. The columns with the following controls are exported:

  • field,

  • checkbox,

  • combodyn2,

  • dateinput,

  • text,

  • textout,

  • label,

  • methodlink,

  • radiobutton,

  • combofix.

Additional static text, for example, a label with a static name property, is not exported.

Icon Bars

You can add icon bars to the ROWTABLEAREA2 control. BLOCKSCROLLINGBAR is an icon bar which contains the blockscrolling buttons. Use ICONBAR and ICONBARLINE controls to create your own icon bar. The icons TOCLIPBOARDICON and TOFILEICON support the "copy to clipboard" and/or "export to file" functionality,

Properties for BLOCKSCROLLINGBAR

Basic
comment

Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view.

Optional  
styleclass

CSS style class used for rendering.

Optional  
float

If set to left, the bar is rendered on the left of the row. If set to right the bar is rendered at the right of the row. Default is right.

Optional

left

right

inherit

Properties for ICONBAR

Basic
styleclass

CSS style class used for rendering.

Optional  
float

If set to left, the bar is rendered on the left of the row. If set to right the bar is rendered at the right of the row. Default is right.

Optional

left

right

inherit

comment

Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view.

Optional  

Properties for ICONBARLINE

Basic
height

Height of the control.

There are three possibilities to define the height:

(A) You do not define a height at all. As consequence the control will be rendered with its default height. If the control is a container control (containing) other controls then the height of the control will follow the height of its content.

(B) Pixel sizing: just input a number value (e.g. "20").

(C) Percentage sizing: input a percentage value (e.g. "50%"). Pay attention: percentage sizing will only bring up correct results if the parent element of the control properly defines a height this control can reference. If you specify this control to have a height of 50% then the parent element (e.g. an ITR-row) may itself define a height of "100%". If the parent element does not specify a width then the rendering result may not represent what you expect.

Optional

100

150

200

250

300

250

400

50%

100%

comment

Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view.

Optional  

Properties for TOCLIPBOARDICON

Basic
image

URL that points to the image that is shown as icon.

The URL either is an absolute URL or a relative URL. If using a relative URL then be aware of that the generated page is located directly inside your project's directory.

Example: "images/icon.gif" points to an icon in an images-folder that is parallel to the page itself. "../HTMLBasedGUI/images/new.gif" point to a URL that is located inside a different project.

Obligatory

gif

jpg

jpeg

comment

Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view.

Optional  
imagewidth

Pixel width of the image that is shown inside the icon. If not defined then the icon is rendered with its normal width.

Optional

10

20

40

100

300

imageheight

Pixel height of the image that is shown inside the icon. If not defined then the icon is rendered with its normal height.

Optional

10

20

40

100

300

selectedonly

If set to true only the selected items of the grid are exported.

Optional

true

false

title

Text that is shown as tooltip for the control.

Either specify the text "hard" by using this TITLE property - or use the TITLETEXTID in order to define a language dependent literal.

Optional  
titletextid

Text ID that is passed to the multi lanaguage management - representing the tooltip text that is used for the control.

Optional  
testtoolid

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Optional  

Properties for TOFILEICON

Basic
image

URL that points to the image that is shown as icon.

The URL either is an absolute URL or a relative URL. If using a relative URL then be aware of that the generated page is located directly inside your project's directory.

Example: "images/icon.gif" points to an icon in an images-folder that is parallel to the page itself. "../HTMLBasedGUI/images/new.gif" point to a URL that is located inside a different project.

Obligatory

gif

jpg

jpeg

comment

Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view.

Optional  
imagewidth

Pixel width of the image that is shown inside the icon. If not defined then the icon is rendered with its normal width.

Optional

10

20

40

100

300

imageheight

Pixel height of the image that is shown inside the icon. If not defined then the icon is rendered with its normal height.

Optional

10

20

40

100

300

selectedonly

If set to true only the selected items of the grid are exported.

Optional

true

false

title

Text that is shown as tooltip for the control.

Either specify the text "hard" by using this TITLE property - or use the TITLETEXTID in order to define a language dependent literal.

Optional  
titletextid

Text ID that is passed to the multi lanaguage management - representing the tooltip text that is used for the control.

Optional  
testtoolid

Use this attribute to assign a fixed control identifier that can be later on used within your test tool in order to do the object identification

Optional  

ROWTABLEAREA2 Properties

Basic
griddataprop

Name of the adapter parameter that represents the control in the adapter.

Obligatory  
rowcount

Number of rows that are rendered inside the control.

There are two ways of using this property - dependent on whether you in addition define the HEIGHT property:

If you do NOT define the HEIGHT property then the control is rendered with exactly the number of rows that are defined as ROWCOUNT value.

If a HEIGHT value is defined in addition (e.g. as percentage value "100%") then the number of rows depend on the actual height of the control. The ROWCOUNT value in this case indicates the maximum number of rows that are picked from the server. You should define this value in a way so that it is not too low - otherwise your grid will not be fully filled. On the other hand it should not be defined too high ("100") because this causes more communication traffic and more rendering effort inside the browser.

Optional  
height

Height of the control.

There are three possibilities to define the height:

(A) You do not define a height at all. As consequence the control will be rendered with its default height. If the control is a container control (containing) other controls then the height of the control will follow the height of its content.

(B) Pixel sizing: just input a number value (e.g. "20").

(C) Percentage sizing: input a percentage value (e.g. "50%"). Pay attention: percentage sizing will only bring up correct results if the parent element of the control properly defines a height this control can reference. If you specify this control to have a height of 50% then the parent element (e.g. an ITR-row) may itself define a height of "100%". If the parent element does not specify a width then the rendering result may not represent what you expect.

Optional

100

150

200

250

300

250

400

50%

100%

width

Width of the control.

There are three possibilities to define the width:

(A) You do not define a width at all. In this case the width of the control will either be a default width or - in case of container controls - it will follow the width that is occupied by its content.

(B) Pixel sizing: just input a number value (e.g. "100").

(C) Percentage sizing: input a percantage value (e.g. "50%"). Pay attention: percentage sizing will only bring up correct results if the parent element of the control properly defines a width this control can reference. If you specify this control to have a width of 50% then the parent element (e.g. an ITR-row) may itself define a width of "100%". If the parent element does not specify a width then the rendering result may not represent what you expect.

Sometimes obligatory

100

120

140

160

180

200

50%

100%

firstrowcolwidths

If set to "true" then the grid is sized according to its first row. This first row typically is a header-TR-row in which GRIDCOLHEADER controls are used as column headers for the subsequent rows.

Default is "false", i.e. the grid is sized according to its "whole content".

Please note: when using the GRIDCOLHEADER control within the header-TR-row this property must be set to "true" - otherwise column resizing (by drag and drop) does not work correctly.

Sometimes obligatory

true

false

onloadbehaviour

DEPRECATED: Loading behaviour of the items into the client.

"block" (=default). Only "block" is supported´. All other settings are automatically mapped to "block".

Optional

block

collection

collectionorblock

comment

Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view.

Optional  
Appearance
withborder

If set to "false" then no thin border is drawn around the controls that are contained in the grid.

Default is "true".

Optional

true

false

hscroll

Definition of the horizontal scrollbar's appearance.

You can define that the scrollbars only are shown if the content is exceeding the control's area ("auto"). Or scrollbars can be shown always ("scroll"). Or scrollbars are never shown - and the content is cut ("hidden").

Default is "hidden".

Optional

auto

scroll

hidden

vscroll

Definition of the vertical scrollbar's appearance.

You can define that scrollbars only are shown if the content is exceeding the control's area ("auto"). Or scrollbars can be shown always ("scroll"). Or scrollbars are never shown - and the content is cut ("hidden").

Default is "scroll".

Optional

auto

scroll

hidden

firstrowcolwidths (already explained above)    
touchpadinput

If set to "true" then touch screen icons for scrolling are displayed in addition.

Default is "false".

Optional

true

false

requiredheight

Minimum height of the control in pixels. Use this property to ensure a minimum height if the overall control's height is a percentage of the available space - i.e. if value of property HEIGHT is a percentage (e.g. 100%).

Please note:You must not use FIXLAYOUT at the surrounding row container (ITR and ROWAREA). Otherwise: if the available space is less than the required height the end of the control is just cut off.

Optional

1

2

3

int-value

tablestyle

CSS style definition that is directly passed into this control.

With the style you can individually influence the rendering of the control. You can specify any style sheet expressions. Examples are:

border: 1px solid #FF0000

background-color: #808080

You can combine expressions by appending and separating them with a semicolon.

Sometimes it is useful to have a look into the generated HTML code in order to know where direct style definitions are applied. Press right mouse-button in your browser and select the "View source" or "View frame's source" function.

Optional

background-color: #FF0000

color: #0000FF

font-weight: bold

darkbackground

Normally the background is in light colour but the CIS style sheets also have a dark(er) grey colour to be used.

If DARKBACKGROUND is set to true then the darker background colour is chosen. This property typically is used to integrate light coloured controls into darker container areas.

Optional

true

false

invisiblemodeincompletelastrow

If set to "invisible" an incomplete last row is not shown.

Optional

invisible

visible

withsliderfreeze

Setting this to "true" prevents unwanted slider jumps while scrolling up/down in a grid with a huge number of lines (for example 20000).

Optional

true

false

Features
clipboardaccess

If switched to true then the content of the grid can be selected and exported into the client's clipboard.

Optional

true

false

withblockscrolling

If switched to "true" then the grid will show small scroll icons by which the user can scroll the grid's content. Scrolling typically is done by using the grid's scrollbar - the scroll icons that are switched on by this property are an additional possibility to scroll.

Optional

true

false

withcopytoclipboard

If set to TRUE a corresponding icon to copy all grid items to the clipboard is added.

Optional

true

false

copytoclipboardtitle

Text that is shown as tooltip for the control.

Either specify the text "hard" by using this TITLE property - or use the TITLETEXTID in order to define a language dependent literal.

Optional  
withselectedtoclipboard

If set to TRUE a corresponding icon to copy the selected grid items to the clipboard is added.

Optional

true

false

selectedtoclipboardtitle

Text that is shown as tooltip for the control.

Either specify the text "hard" by using this TITLE property - or use the TITLETEXTID in order to define a language dependent literal.

Optional  
withexporttofile

If set to TRUE a corresponding icon to copy all grid items to a csv file is added.

Optional

true

false

exporttofiletitle

Text that is shown as tooltip for the control.

Either specify the text "hard" by using this TITLE property - or use the TITLETEXTID in order to define a language dependent literal.

Optional  
withselectedtofile

If set to TRUE a corresponding icon to copy the selected grid items to a csv file is added.

Optional

true

false

selectedtofiletitle

Text that is shown as tooltip for the control.

Either specify the text "hard" by using this TITLE property - or use the TITLETEXTID in order to define a language dependent literal.

Optional  
Binding
oncontextmenumethod

Name of the event that is sent to the adapter when the user presses the right mouse button in the grid, but not on an existing row, but in an empty area of the grid.

Optional  
fwdtabkeymethod

Name of the event that is sent to the adapter when the user presses the TAB key within the very last cell of the grid (last cell within the last line). Use property FWDTABKEYFILTER to associate this call with a grid column.

Optional  
fwdtabkeyfilter

By default the FWDTABKEYMETHOD is called if the user presses the TAB key within the veryfirst cell of the grid. Input the name of a cell's VALUEPROP to associate the method call with any other column.

Optional  
bwdtabkeymethod

Name of the event that is sent to the adapter when the user presses SHIFT and TAB keys within the first cell of a grid line. Use property BWDTABKEYFILTER to associate this call with a cell of choice.

Optional  
bwdtabkeyfilter

By default the BWDTABKEYMETHOD is called if the user presses the SHIFT and TAB keys within the very first cell of the grid. Input the name of a cell's VALUEPROP to associate the method call with any other column.

Optional  
Hot Keys
hotkeys

Comma separated list of hot keys. A hotkey consists of a list of keys and a method name. Separate the keys by "-" and the method name again with a comma

Example:

ctrl-alt-65;onCtrlAltA;13;onEnter ...defines two hot keys. Method onCtrlAltA is invoked if the user presses Ctrl-Alt-A. Method "onEnter" is called if the user presses the ENTER key.

Use the popup help within the Layout Painter to input hot keys.

Optional  
Natural
njx:natname

If a Natural variable with a name not valid for Application Designer (for instance #FIELD1) shall be bound to the control, a different name (for instance HFIELD1) can be bound instead. If the original name (in this case #FIELD1) is then specified in this attribute, the original name is generated into the parameter data area of the Natural adapter and a mapping between the two names is generated into the PROCESS PAGE statement of the Natural adapter. This mapping must not break a once defined group structure. If for instance a grid control that is bound to a name of GRID1 contains fields that are bound to FIELD1 and FIELD2 respectively, the corresponding njx:natname values may be #GRID1.#FIELD1 and #GRID1.#FIELD2, but not #GRID1.#FIELD1 and #MYGRID1.#FIELD2.

Optional  
njx:natcomment

The value of this attribute is generated as comment line into the parameter data area of the Natural adapter, before the field name. The Map Converter, for instance, uses this attributes to indicate for a generated statusprop variable to which field the statusprop belongs.

Optional  

STR Properties

STR (selectable table row) is a normal table row (TR) that highlights its background depending on an adapter property.

Basic
valueprop

Name of the adapter parameter that defines if the row is selected or not.

Obligatory  
withalterbackground

Flag that indicates if the grid line shows alternating background color (like rows within a textgrids). Default is false. Please note: controls inside the row must have transparent background. In case of the FIELD control simply set property TRANSPARENTBACKGROUND to true.

Optional

true

false

showifempty

Flag that indicates if an unused row is visible. Example: if set to false a grid with rowcount ten and a server side collection size of seven will hide the three remaining rows.

Default is false.

Optional

true

false

comment

Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view.

Optional  
Binding
valueprop (already explained above)    
onclickmethod

Name of the event that is sent to the adapter when the user clicks a line.

Optional  
alwaysonclick

If no onclickmethod is defined, this property is ignored. If an onclickmethod is defined and this property is set to false, then the onclickmethod is only called if the clicked control does call a method itself. Example: A click on a button will only call the method defined in the button. Default is true, which means both methods will be called.

Optional

true

false

ondblclickmethod

Name of the event that is sent to the adapter when the user double clicks a line.

Optional  
contextmenumethod

Name of the event that is sent to the adapter when the user presses the right mouse button in an empty area.

Optional  
proprefprop

Name of the adapter parameter that is filled when the user clicks a FIELD control. The VALUEPROP of the clicked field control will passed.

Optional  
strstyleprop

Name of the adapter parameter that dynamically provides explicit style information for the control.

Optional  
backgroundcolorprop

Name of the adapter parameter that dynamically provides the background color for this control.

Optional  
Natural
njx:natname

If a Natural variable with a name not valid for Application Designer (for instance #FIELD1) shall be bound to the control, a different name (for instance HFIELD1) can be bound instead. If the original name (in this case #FIELD1) is then specified in this attribute, the original name is generated into the parameter data area of the Natural adapter and a mapping between the two names is generated into the PROCESS PAGE statement of the Natural adapter. This mapping must not break a once defined group structure. If for instance a grid control that is bound to a name of GRID1 contains fields that are bound to FIELD1 and FIELD2 respectively, the corresponding njx:natname values may be #GRID1.#FIELD1 and #GRID1.#FIELD2, but not #GRID1.#FIELD1 and #MYGRID1.#FIELD2.

Optional  
njx:natcv

Name of a Natural control variable that shall be assigned to the control.

Optional  
njx:natcomment

The value of this attribute is generated as comment line into the parameter data area of the Natural adapter, before the field name. The Map Converter, for instance, uses this attributes to indicate for a generated statusprop variable to which field the statusprop belongs.

Optional