Active Bundles

This section covers the following topics:

See also Active Reports in an Active Bundle.


What is an Active Bundle?

An active bundle is a group of active reports. It is created by Entire Output Management based on a bundle definition. The active reports in an active bundle are processed together as a unit.

See also What is a Bundle?

Available Commands for Active Bundles

Start of instruction setTo list all available commands for active bundles:

  1. In the object workspace, expand the Active Bundles folder.

  2. Select an active bundle and invoke the context menu.

    A list of available commands is displayed.

These are:

Command Shortcut Explanation
Active in Bundle --- List the reports contained in an active bundle. A list of reports is displayed to allow browsing of active reports or deletion of the active report from this bundle.
Archive --- Mark all reports in an active bundle for archiving.
Close --- Close an active bundle.
Delete Del Delete an active bundle. Only control information is deleted. The active reports contained in the bundle are not deleted.
Display Ctrl+D Display active bundle parameters.
Display Log F10 Display log information for an active bundle.
Filter F3 Use selection criteria to list active bundles.
List Active Ctrl+F8 List all active bundles.
Info --- Display additional information on an active bundle.
Open Ctrl+O Modify active bundle. Note that modifications hold only for this current copy of the bundle and do not affect the bundle definition. Modifications can be performed only if bundle status = Opened.
Print --- Print an active bundle. The bundle is forced to print no matter what was defined to control printing. This command can be entered only if bundle status = Opened.
Revive --- Mark all reports in an active bundle for reviving.
Filter Subobject Ctrl+F3 Use selection criteria to list active reports.

Listing All Active Bundles

Start of instruction setTo list all active bundles:

  1. In the object workspace, select the Active Bundles folder.

  2. Invoke the context menu and choose List Active.

    All active bundles are listed in the content pane.

For each active bundle, the following information is displayed:

Field Explanation
Bundle Bundle name.
Run Number Unique number identifying the active report.
Status Bundle status:
Closed Bundle can accept no additional reports.
Empty Bundle is empty.
Flushing Bundle is being closed.
Forced Bundle forced to print when retention period expires.
Opened Bundle is open and contains reports.
Print Bundle is being printed.
Printed Bundle has been printed.
Processing Bundle is being processed.
Number of Reports Number of reports in the bundle.
Coordinator ID User ID of the bundle coordinator.
Open Date/Time Date and time bundle was opened.
Close Date/Time Date and time bundle was closed.
Message Indicates why the bundle cannot be printed. For example, if no printer has been assigned, the message "No Printer" is displayed here.
Description Short description of bundle

Listing Selected Active Bundles

Start of instruction setTo list active bundles according to selection criteria:

  1. In the object workspace, select the Active Bundles folder.

  2. Invoke the context menu and choose Filter.

    The Filter Active Bundles window is displayed.

  3. Enter your selection criteria, and choose OK.

    Now only active bundles which satisfy the selection criteria are displayed in the expanded Active Bundles folder in the object workspace.

Modifying an Active Bundle

Start of instruction setTo modify the attributes of an active bundle:

  1. Select the desired active bundle in the object workspace or in the report list.

  2. Invoke the context menu and choose Open.

    The active bundle is displayed. It consists of: General Attributes and Printing Attributes.

  3. To change the desired attributes, choose the appropriate tab.

  4. The corresponding window is displayed, and you can change the data. The individual attributes are described below.

  5. Choose OK to save your changes.

General Attributes

Field Explanation
Run Number Internal sequence number (cannot be modified).
Created Date and time when first active report arrived for this bundle (cannot be modified).
Coordinator ID ID of the bundle coordinator.
Print events Time schedule The print time is computed at an open time based on the defined time schedule. If 00-01-02 00:00 appears here, it means that no time trigger is in effect.
Lines exceeded When the report that causes this line number to be exceeded has been written to the active bundle, the bundle is closed and scheduled for printing.
Report arrival The bundle is printed when all these reports arrive.

Printing Attributes

The printing attributes of active bundles correspond to those of bundles. See Printing Attributes in the section Bundles.

Displaying an Active Bundle

Start of instruction setTo display the attributes of an active bundle:

  1. In the object workspace or in the active bundle list, select the desired active bundle.

  2. Invoke the context menu and choose Display.

    The attributes of the active bundle are displayed. For an explanation of the attributes and their fields, see Modifying an Active Bundle.

Closing an Active Bundle

This function closes an active bundle so that it can accept no additional reports. If additional reports arrive for the bundle, a new version of the bundle is opened to accept them.

Start of instruction setTo close an active bundle:

  1. In the object workspace or in the active bundle list, select the desired active bundle.

  2. Invoke the context menu and choose Close.

    A dialog is displayed, asking you for confirmation.

  3. Choose Yes to close the active bundle.

Printing an Active Bundle

Start of instruction setTo print a single active bundle:

  1. In the object workspace or in the active bundle list, select the desired active bundle.

  2. Invoke the context menu and choose Print.

    The Print Active Bundle dialog is displayed.

  3. Choose the Select button to the right of the Printer field to display a list of printers.

  4. Select a printer from the list, and choose OK.

    The name of the selected printer is displayed in the Printer field of the Print Active Bundle dialog.

  5. Options:

    • If desired, change the number of Copies to be printed.

    • If you want to put the printout on hold, select the option Hold printout.

    • If desired, select the option Close active bundle before printing.

  6. Choose Print to print the active bundle.

    A message confirms that the active bundle has been queued for printing.

Start of instruction setTo print multiple active bundles:

  1. In the active bundle list, select the desired active bundles.

  2. Invoke the context menu and choose Print.

    The Print Active Bundle dialog is displayed with a list of the selected active bundles.

  3. Choose the Select button to the right of the Printer field to display a list of printers.

  4. Select a printer from the list, and choose OK.

    The name of the selected printer is displayed in the Printer field of the Print Active Bundle dialog.

  5. By default, all active bundles are printed on the same printer. If this is not desired, deselect the option Print all bundles on the same printer.

    In the list of active bundles, you can then mark those which are to be printed on the selected printer.

  6. Further options:

    • If desired, change the number of Copies to be printed.

    • If you want to put the printout on hold, select the option Hold printout.

    • If desired, select the option Close active bundles before printing.

  7. Choose Print to print the active bundles.

    A message confirms that the active bundles have been queued for printing.

Archiving an Active Bundle

This function marks an active bundle for archiving. The bundle is archived the next time the archiving task is active.

Start of instruction setTo mark an active bundle for archiving:

  1. In the object workspace or in the active bundle list, select an active bundle that has not been archived.

  2. Invoke the context menu and choose Archive.

    A message confirms the number of reports marked for archiving.

Reviving an Active Bundle

This function marks all archived reports in an active bundle to be revived. The reports will be revived the next time the revive job runs.

Start of instruction setTo mark an active bundle for reviving:

  1. In the object workspace or in the active bundle list, select an active bundle that has been archived.

  2. Invoke the context menu and choose Revive.

    The Revive Active Bundles From Archive dialog is displayed.

  3. Use the list box to the right of the Revive to field to select a destination for the revived active bundle: NOM database or JES Spool.

  4. Choose OK to confirm your selection.

    A message confirms the number of reports marked for reviving.

Deleting an Active Bundle

Start of instruction setTo delete an active bundle:

  1. In the object workspace or in the active bundle list, select the desired bundle.

  2. Invoke the context menu and choose Delete.

    A dialog is displayed, asking you to confirm the deletion.

  3. Choose Yes to delete the active bundle, or No to cancel the operation.

Displaying Information on an Active Bundle

Start of instruction setTo display additional information on an active bundle:

  1. In the object workspace or in the active bundle list, select the desired active bundle.

  2. Invoke the context menu and choose Info.

    The following information is displayed:

Fields

Field Explanation
Bundle Run number Unique internal identifier of active bundle.
Description Short description of active bundle.
Number of Reports Number of active reports contained in active bundle.
Lines Number of lines contained in active bundle.
Coordinator ID User ID of the bundle coordinator.
Name Name of bundle coordinator.
Phone Phone number of bundle coordinator.
Date/Time of Open Date and time bundle was opened.
Close Date and time bundle was closed.
Planned flush When the bundle is opened, the print time is computed based on the defined time schedule. If 00-01-02 00:00 or nothing at all appears here, it means that no time trigger is in effect.
Expiration date Force The day on which the closing and printing of the active bundle is to be forced.

This date is computed when the active bundle is opened. It is computed using the general attribute Force Flush in the corresponding bundle definition; see Attributes of a Bundle.

Purge The day on which the active bundle is to be deleted.

This date is computed when the active bundle is closed. It is computed using the general attribute Retention Period in the corresponding bundle definition; see Attributes of a Bundle.

Displaying Log Information for an Active Bundle

Start of instruction setTo display log information for an active bundle:

  1. In the object workspace or in the active bundle list, select the desired bundle.

  2. Invoke the context menu and choose Display Log.

    A list of all events concerning the active bundle is displayed. For each event, the list contains the following information: the date and time when it occurred, the ID of the user or monitor causing it, and a message explaining the event.

  3. To display more detailed log information for an entry in the active bundle log, select an entry, invoke the context menu and choose Info.

    A dialog with detailed information on the selected entry is displayed.