This section describes the use of HTML to Natural, a program that enables you to convert an HTML page into a Natural subprogram for use with Natural Web Interface.
Using HTML to Natural to generate Natural code from an HTML page avoids you having to adapt HTML input to the conventions of Natural code. You can then move the "HTML-page-turned-subprogram" to the server, including all the other Natural program logic you have added. If you want to change the HTML page again, go back to your source, convert it and move it to the server again. This is much easier than writing HTML with a browser, moving it to the server, adding Natural program logic and reiterating the process if your HTML page changes.
This section covers the following topics:
If your basic web pages are designed with editing tools, it takes some effort to include such a page in a Natural subprogram that can be called from the Web.
HTML to Natural is a program that uses an HTML page as input and generates a Natural subprogram, which can be called by the Natural Web Server Extensions using the Natural Web Interface.
To start the HTML to Natural program
Logon to the Natural library SYSWEB3.
Execute the program HTM-NAT.
The following menu is shown:
16:00:13 ***** Web Interface Program Generator ***** 2016-01-09
- Main Menu - Library SYSWEB3
Generation type
Code ............. B
B Basic
S Stand-alone
T Transformation
A Template
Input file
Library .......... SYSWEB3
Resource .........
Generated Natural object
Library .......... SYSWEB3
Object type ...... N
Object ...........
Subroutine name ..
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
Help Exit Opt. Canc
|
Below is information on:
Generating a Subprogram/Subroutine to be called directly from the Web
Generating a Standalone Subprogram to be Called Directly from the Web
| Key | Function | Explanation |
|---|---|---|
| PF1 | Help | Invokes the Help function for the field at which the cursor is positioned. |
| PF3 | Exit | Leaves the program and returns to the command line. |
| PF10 | Opt. | Options. Specifies options for the generation process. |
| PF12 | Canc | Leaves the program without saving your changes. |
| ENTER | Starts generating the program. |
To generate a subprogram/subroutine to be called directly
from the Web
Select Type of generation: Basic.
Select your Generated Natural object.
Start the generation.
After the generation, this page can be called from the internet, but because this page does not set any data, the page will be empty.
Example of a basic generation
Generated Natural subprogram, to be called directly from the internet:
0010 * ----- GENERATED BY NATURAL WEB INTERFACE * Library .....: SYSPLWEB * Source Name .: BASIC * ----- DEFINE DATA PARAMETER USING W3PARM LOCAL USING W3CONST * ----- PRIVATE VARIABLES ----- * LOCAL * 1 W3VALUE (A250) END-DEFINE * ----- ERROR HANDLER ----- ON ERROR PERFORM W3ERROR ##W3ERROR PERFORM W3END ##RPC ESCAPE ROUTINE END-ERROR * ----- INITIALISE HTTP API ----- PERFORM W3INIT ##RPC * --- READ ENVIRONMENT --- * PERFORM W3READ-ENVIRONMENT-DYNAMIC 'varname' ' ' W3VALUE * set default value * IF *length(W3VALUE) = 0 THEN * W3VALUE := ?? * END-IF * ----- HEADER FOR SERVER ----- * PERFORM W3CONTENT-TYPE 'text/html' * * * Add your individual coding using W3* subroutines or * call your own subroutines. * * * ----- END HTTP ----- PERFORM W3END ##RPC * ----- END MAIN PROGRAM ----- * END
To generate a subprogram to be called directly from the
Web:
Select Type of generation: Stand-alone.
Select your Generated Natural object.
Start the generation.
After the generation, you can call the Natural Web Interface to show the page.
Example of a standalone generation
Generated Natural subprogram, to be called directly from the internet:
* ----- GENERATED BY NATURAL WEB INTERFACE * Library .....: SYSPLWEB * Source Name .: ALONE * ----- DEFINE DATA PARAMETER USING W3PARM LOCAL USING W3CONST * ----- PRIVATE VARIABLES ----- LOCAL 1 W3VALUE (A250) END-DEFINE * ----- ERROR HANDLER ----- ON ERROR PERFORM W3ERROR ##W3ERROR PERFORM W3END ##RPC ESCAPE ROUTINE END-ERROR * ----- INITIALISE HTTP API ----- PERFORM W3INIT ##RPC * ----- HEADER FOR SERVER ----- PERFORM W3CONTENT-TYPE 'text/html' * * --- READ ENVIRONMENT --- * PERFORM W3READ-ENVIRONMENT-DYNAMIC 'varname' ' ' W3VALUE * set default value * IF *length(W3VALUE) = 0 THEN * W3VALUE := ?? * END-IF * --- WRITE THE HEAD OF THE DOCUMENT --- PERFORM W3TEXT "<!DOCTYPE 'HTML PUBLIC-//W3C//DTD HTML 3.2//EN'>"- '<html>'- '<head>'- "<meta http-equiv='Content-Type' content='"- "text/html; charset=iso-8859-1'>"- '<title>SYSPLWEB/TEST</title>'- '</head>' * --- WRITE THE BODY OF THE DOCUMENT --- PERFORM W3TEXT '<body>'- '<h2>SYSPLWEB/TEST</h2>'- '<hr>' * PERFORM W3TEXT '<p>This is your output</p>' * COMPRESS '<hr>generated:' *DATE *TIME INTO W3VALUE PERFORM W3TEXT W3VALUE * --- END THE BODY OF THE DOCUMENT --- PERFORM W3TEXT '</body>'- '</html>' * * ----- END HTTP ----- PERFORM W3END ##RPC * ----- END MAIN PROGRAM ----- * END
To generate a subprogram/subroutine to be called directly
from the Web:
Select Type of generation: Transformation.
Select your input file of type HTML.
Choose the Natural library you want to generate to.
Select the object type you want to generate.
Select your Generated Natural object.
Start the generation.
After the generation, you can call the Natural Web Interface to show the page.
If you use Natural on your HTML page, it is possible to specify your special Natural coding direct in the HTML page. After generation, the program needs no additional changes.
The HTM-NAT program can recognize a
<NATURAL> tag. All lines between
<NATURAL> and </NATURAL> will be copied,
as they are, to the generated Natural source object.
Appearance
<NATURAL> </NATURAL>
|
Below is information on:
Listed below are attributes provided to define coding sections that are to be moved within the program or excluded from the program.
| Attribute | Explanation |
|---|---|
| DATA | <NATURAL
DATA> or <NATURAL LDA> moves the defined section
to the DEFINE DATA LOCAL part of your program.
|
| LDA | |
| GDA | <NATURAL GDA> moves the defined
section to the DEFINE DATA GLOBAL part of your program.
|
| SUB | <NATURAL SUB> moves the defined
section to the end of the program. This enables you to specify inline
subroutines.
|
| NOT | <NATURAL NOT> excludes the
defined section from the program. This enables you to specify the design of
part of a page that will be generated by a program.
|
Use the comment tag <!-- --> to hide the
display of defined sections of your coding. If you use the comment tag and
<NATURAL NOT>, you can display the predefined page with a
normal browser. This helps you to specify your page and replace parts of the
page dynamically.
With the current version of HTM-NAT, not only
<NATURAL> and </NATURAL> can be used but
also ASP-like (Active Server Page) script commands which are differentiated
from the text by using the <% and %>
delimiters.
The following Natural-specific directives must be used when writing a Natural subprogram:
- Output directive:
<%= ... %>Short form for
<% PERFORM W3HTML ... %>tag- Subprogram directive:
<%SUB ... %>equal to the
<NATURAL SUB> ... </NATURAL>tag- Global Data Area directive:
<%GDA ... %>equal to the
<NATURAL GDA> ... </NATURAL>tag- directive:
<%LDA ... %>equal to the
<NATURAL LDA> ... </NATURAL>tag- Not directive:
<%NOT ... %>equal to the
<NATURAL NOT> ... </NATURAL>tag- Processing directive
<%@ LANGUAGE=NATURAL %>indicates that the used language is Natural.
HTML document:
<HTML><HEAD><TITLE> Example1 genNat </TITLE></HEAD><BODY><H2> Example1 genNat </H2><HR> <P>This is for your output </BODY></HTML>
Generated Natural subprogram:
* ----- SUBPROGRAM generated out of file: * ----- C:\example1.html DEFINE DATA PARAMETER USING W3PARM LOCAL USING W3CONST LOCAL * ----- PRIVATE VARIABLES ----- 1 W3VALUE (A250) END-DEFINE * * ----- ERROR HANDLER ----- ON ERROR PERFORM W3ERROR ##W3ERROR PERFORM W3END ##RPC ESCAPE ROUTINE END-ERROR * ----- INITIALIZE HTTP API ----- PERFORM W3INIT ##RPC * ----- HEADER FOR SERVER ----- PERFORM W3CONTENT-TYPE 'text/html' * * ----- MAIN PROGRAM ----- PERFORM W3TEXTLINE'<HTML><HEAD><TITLE>' PERFORM W3TEXTLINE 'Example genNat' PERFORM W3TEXTLINE'</TITLE></HEAD><BODY><H2>' PERFORM W3TEXTLINE 'Example genNat' PERFORM W3TEXTLINE '</H2><HR>' PERFORM W3TEXTLINE '<P>This is for your output' PERFORM W3TEXTLINE '</BODY></HTML> ' * ----- END HTTP API ----- PERFORM W3END ##RPC * ----- END MAIN PROGRAM ----- * * * ----- SUBROUTINES ----- END
HTML document:
<HTML><HEAD><TITLE> Example2 genNat </TITLE></HEAD><BODY><H2> Example2 genNat </H2><HR> <P>This is for your output <HR> <P>generated at: <NATURAL NOT> Time/Date </NATURAL> <NATURAL><!-- PERFORM DOTIME --></NATURAL> <NATURAL SUB><!-- DEFINE SUBROUTINE DOTIME COMPRESS *TIME *DATE INTO #VALUE PERFORM W3TEXTLINE #VALUE END-SUBROUTINE --></NATURAL> <NATURAL DATA><!-- 1 #VALUE (A30) --></NATURAL> </BODY></HTML>
Generated Natural subprogram:
* ----- GENERATED BY NATURAL WEB INTERFACE * File ..........: E:\SAG\Natural\v.r\Fnat\SYSWEB\RES\example2.html * Library .......: SYSWEB * Source Name ...: EXAMPLE2 * Crunch Lines...: 1 * Save Source....: 1 * Line Length....: 128 * Long Constants.: 1 * ----- DEFINE DATA PARAMETER USING W3PARM LOCAL USING W3CONST 1 #VALUE (A30) * ----- PRIVATE VARIABLES ----- 1 W3VALUE (A250) END-DEFINE * * ----- ERROR HANDLER ----- ON ERROR PERFORM W3ERROR ##W3ERROR PERFORM W3END ##RPC ESCAPE ROUTINE END-ERROR * ----- INITIALIZE HTTP API ----- PERFORM W3INIT ##RPC * ----- HEADER FOR SERVER ----- PERFORM W3CONTENT-TYPE 'text/html' * * ----- MAIN PROGRAM ----- PERFORM W3TEXTLINE'<HTML><HEAD><TITLE>' PERFORM W3TEXTLINE 'Example2 genNat' PERFORM W3TEXTLINE'</TITLE></HEAD><BODY><H2>' PERFORM W3TEXTLINE 'Example2 genNat' PERFORM W3TEXTLINE '</H2><HR>' PERFORM W3TEXTLINE '<P>This is for your output' PERFORM W3TEXTLINE '<HR>' PERFORM W3TEXTLINE '<P>generated at:' PERFORM DOTIME PERFORM W3TEXTLINE '</BODY></HTML>' * ----- END HTTP API ----- PERFORM W3END ##RPC * ----- END MAIN PROGRAM ----- * * * ----- SUBROUTINES ----- DEFINE SUBROUTINE DOTIME COMPRESS *TIME *DATE INTO #VALUE PERFORM W3TEXTLINE #VALUE END-SUBROUTINE END
Note:
The syntax of the Natural program will not be checked during
conversion.
To generate a subprogram/subroutine using a template that is
called directly from the Web:
Select type of generation: Template.
Select your input file of type HTML.
Select the object type you want to generate.
Select your Generated Natural object.
Start the generation.
After generation, you can call the Natural Web Interface to show the page.
It is necessary to specify the replacement strings directly in the HTML page. The replacement strings have to start and end with an specific character, e.g. $ (see Options). The name (content) of a string has to comply with the Natural rules for variable names. If not, subroutines may not stow.
If the name of the replacement string is prefixed with "HTML", unsaved characters as "<" or ">" will be replaced during replacement at runtime.
The following prefixes for automatic conversion at runtime are implemented:
HTML
URL
XML
For more information, see the documentation of the subroutine W3REPLACE-AT-OUTPUT.
HTML document:
<HTML>
<HEAD>
<TITLE>Template Processing</TITLE>
</HEAD>
<BODY>
<H2>
Template Processing
</H2>
<P>
<HR>
<TABLE BORDER="0">
<TR><TD>Log-Time:</TD><TD>$log$<TD></TR>
<TR><TD>HTTPs Extension:</TD><TD>$html-ext$<TD></TR>
<TR><TD>Web Interface:</TD><TD>$html-ver$<TD></TR>
</TABLE>
<P>
<TABLE BORDER='0' WIDTH='100%' CELLSPACING='0' CELLPADDING=5>
<TR BGCOLOR='#00cc66'>
<TD>$prog$ - $log$</TD>
<TD ALIGN='RIGHT'>Natural</TD>
</TR>
</TABLE>
</BODY></HTML>
Generated Natural subroutine, that has to be called from a subprogram that is called from the internet:
* ----- GENERATED BY NATURAL WEB INTERFACE * File ........: E:\SAG\Natural\v.r\Fnat\SYSWEB\RES\templ.html * Library .....: SYSWEB * Source Name .: TEMPL * Delimiter ...: $ * ----- DEFINE DATA PARAMETER 1 log (A) DYNAMIC BY VALUE 1 html-ext (A) DYNAMIC BY VALUE 1 html-ver (A) DYNAMIC BY VALUE 1 prog (A) DYNAMIC BY VALUE END-DEFINE * * DEFINE SUBROUTINE e3templm * * ----- HEADER FOR SERVER ----- PERFORM W3CLEAR PERFORM W3CONTENT-TYPE 'text/html' * ----- MAIN PROGRAM ----- * --- LOAD THE HTML TEMPLATE --- PERFORM W3LOAD-RESOURCE ' ' 'e3templ.html' * * --- REPLACE PLACEHOLDER --- PERFORM W3REPLACE-AT-OUTPUT ' ' '$log$' log PERFORM W3REPLACE-AT-OUTPUT 'HTML' '$ext$' ext PERFORM W3REPLACE-AT-OUTPUT 'HTML' '$ver$' ver PERFORM W3REPLACE-AT-OUTPUT ' ' '$prog$' prog * ----- END MAIN PROGRAM ----- * END-SUBROUTINE * END
Generated Natural subprogram, to be called directly from the internet:
* ----- GENERATED BY NATURAL WEB INTERFACE * File ........: E:\SAG\Natural\v.r\Fnat\SYSWEB\RES\templ.html * Library .....: SYSWEB * Source Name .: TEMPL * Delimiter ...: $ * ----- DEFINE DATA PARAMETER USING W3PARM LOCAL USING W3CONST LOCAL * ----- PRIVATE VARIABLES ----- 1 W3VALUE (A250) END-DEFINE * * ----- ERROR HANDLER ----- ON ERROR PERFORM W3ERROR ##W3ERROR PERFORM W3END ##RPC ESCAPE ROUTINE END-ERROR * ----- INITIALISE HTTP API ----- PERFORM W3INIT ##RPC * ----- HEADER FOR SERVER ----- PERFORM W3CONTENT-TYPE 'text/html' * * ----- MAIN PROGRAM ----- * --- LOAD THE HTML TEMPLATE --- PERFORM W3LOAD-RESOURCE 'SYSWEB' 'e3templ.html' * * --- REPLACE PLACEHOLDER --- PERFORM W3REPLACE-AT-OUTPUT ' ' '$log$' 'replace-string-1' PERFORM W3REPLACE-AT-OUTPUT 'HTML' '$ext$' 'replace-string-2' PERFORM W3REPLACE-AT-OUTPUT 'HTML' '$ver$' 'replace-string-3' PERFORM W3REPLACE-AT-OUTPUT ' ' '$prog$' 'replace-string-4' * ----- END HTTP ----- PERFORM W3END ##RPC * ----- END MAIN PROGRAM ----- * END
15:56:29 ***** HTML to Natural ***** 2006-01-09
User DEFAULT - Options - Library SYSWEB3
HTML File
Delete unnecessary white space ...............
Save <NATURAL NOT>..</NATURAL> at source .....
Generated Source
Stow after generation ........................ X
Use long constants ........................... X
Natural line length .......................... 128
Template
Delimiter .................................... $
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
Help Exit Canc
|
Below is information on:
| Field | Explanation |
|---|---|
| Delete unnecessary white space |
If checked, multiple white-space characters such as
blank, new line, tab, will be reduced to a single white space. For special HTML
tags such as Default value: unchecked |
Save <NATURAL NOT> ...
<NATURAL> in Source
|
If checked, the content of Default value: unchecked |
| Stow after Generation |
If checked, the generated program will be stowed if the generation has been successful. Default value: checked |
| Natural Line Length |
The length of the generated Natural source lines: the minimum value is 20, the maximum 246. Default value: 72 |
| Default Input File |
The default input file to be used for the generation. Default value: /nat/natc/611/samples/sysexxt |
| Key | Function | Explanation |
|---|---|---|
| ENTER | Leaves the program and saves the changes. | |
| PF3 | Exit | Returns to the command line. |
| PF12 | Canc | Leaves the program without saving your changes. |
This Test Utility is a component of the Natural Web Interface. You have the ability to check your subprogram locally without involving an HTTP server. The transfer parameters for your web page are transferred into the Test Utility and are posted directly to the business logic. As communication platform, you can use RPC as in real remote communications. The result is either the web page expected or an error message. The web page can be viewed with the browser or a viewer of your choice. If you receive an error message, you can easily debug your business logic locally without writing an extra test routine. No remote debugging is needed.
Features:
Local application check.
No need for remote debugging.
Simplified error checking.
No need to write an extra test routine.
Below is information on:
To run the application
Start the program WEB-ONL3.
Select a library and subprogram name.
Optional: add parameters.
Choose RPC.
Press ENTER.
15:37:27 ***** Natural Web Online Test Utility 3 ***** 2006-01-09
- Main Menu - Library SYSWEB3
Library ............. SYSWEB3 Subprogram ......... NAT-ENV
Transport ........... R
Output text object .. WEB-OUT Output resource .... WEB-OUT
Parameter
Name Value Server: X
1:
2:
3:
4:
5:
6:
7:
8:
9:
HTTP Method ......... GET
Binary transport .... Input filename .....
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
Help Exit Canc
|
| Key | Function | Explanation |
|---|---|---|
| ENTER | Runs the process of receiving the output of the requested subprogram. The status of the process can be seen in the message line at the bottom of the WEB-ONL3 program screen. | |
| PF3 | Exit | Leaves the Test Utility and returns to the command line. |
| PF12 | Canc | Cancel. Stops processing. |