Basic Syntactical Items

This document describes basic syntactical items, which are referenced within the individual SQL statement descriptions.

This document covers the following topics:

Constants
Names
Parameters
Include Columns Clause
Period Clause
Natural Formats and SQL Data Types

Constants

The constants used in the syntactical descriptions of the Natural SQL statements are:

`constant`	The item `constant` refers to either a Natural constant or an SQL `datetime constant`.
`integer`	The item `integer` always represents an integer constant.

Note:
If the character for decimal point notation (session parameter DC) is set to a comma (,), any specified numeric constant must not be followed directly by a comma, but must be separated from it by a blank character; otherwise an error or wrong results occur.

Invalid Syntax: Valid Syntax:

Invalid Syntax:	Valid Syntax:
`VALUES (1,'A')` leads to a syntax error. `VALUES (1,2,3)` leads to wrong results.	`VALUES (1 ,'A')` `VALUES (1 ,2 ,3)`

VALUES (1,'A') leads to a syntax error.

VALUES (1,2,3) leads to wrong results.

VALUES (1 ,'A')

VALUES (1 ,2 ,3)

SQL Datetime Constants

An SQL datetime constant is a character string constant of a particular format that specifies one of the following:

`DATE string-constant`	Specifies an SQL date constant, for example: `DATE '2013-15-01'`.
`TIME string-constant`	Specifies an SQL time constant, for example: `TIME '10:30:15'`.
`TIMESTAMP string-constant`	Specifies an SQL time stamp constant, for example: `TIMESTAMP '2014-15-01 10:20:15.123456'`.

For information on the valid string-constant formats, refer to IBM's Db2 SQL reference information.

Names

The names used in the syntactical descriptions of the Natural SQL statements are:

authorization-identifier
ddm-name
view-name
column-name
location-name
table-name
correlation-name

`authorization-identifier`

The item authorization-identifier, which is also called creator name, is used to qualify database tables and views. See also authorization-identifier under table-name below.

`ddm-name`

The item ddm-name always refers to the name of a Natural data definition module (DDM) as created with the Natural utility SYSDDM.

`view-name`

The item view-name always refers to the name of a Natural view as defined in the DEFINE DATA statement.

`column-name`

The item column-name always refers to the name of a physical database column.

`location-name`

The item location-name always denotes the location of the table. Specification of location-name is optional and belongs to the SQL Extended Set.

`table-name`

The item table-name in this section is used to reference both SQL base tables and SQL viewed tables.

Syntax of item table-name:

[[location-name.]authorization-identifier.]ddm-name

Syntax Element Description:

Syntax Element Description

ddm-name A Natural data definition module (DDM) must have been created for a table to be used. The name of such a DDM must be the same as the corresponding database table name or view name.

location-name This optional item specifies the location of the table to be accessed.

Syntax Element	Description
`ddm-name`	A Natural data definition module (DDM) must have been created for a table to be used. The name of such a DDM must be the same as the corresponding database table name or view name.
`location-name`	This optional item specifies the location of the table to be accessed.
`authorization-identifier`	There are two ways of specifying the `authorization-identifier` of a database table or view. One way corresponds to the standard SQL syntax, in which the `authorization-identifier` is separated from the table name by a period. Using this form, the name of the DDM must be the same as the name of the database table without the `authorization-identifier`. Example: DEFINE DATA LOCAL 01 PERS VIEW OF PERSONNEL 02 NAME 02 AGE END-DEFINE SELECT * INTO VIEW PERS FROM SQL.PERSONNEL ... Alternatively, you can define the `authorization-identifier` as part of the DDM name. The DDM name then consists of the `authorization-identifier` and the database table name separated by a hyphen (-). The hyphen between the `authorization-identifier` and the table name is converted internally into a period. Note: This form of DDM name can also be used with a `FIND` or `READ` statement, because it conforms to the DDM naming conventions applicable to these statements. Example: DEFINE DATA LOCAL 01 PERS VIEW OF SQL-PERSONNEL 02 NAME 02 AGE END-DEFINE SELECT * INTO VIEW PERS FROM SQL-PERSONNEL ... If the `authorization-identifier` has been specified neither explicitly nor within the DDM name, it is determined by the SQL database system. In addition to being used in `SELECT` statements, table names can also be specified in `DELETE`, `INSERT` and `UPDATE` statements. Examples: ... DELETE FROM SQL.PERSONNEL WHERE AGE IS NULL ... ... INSERT INTO SQL.PERSONNEL (NAME,AGE) VALUES ('ADKINSON',35) ... ... UPDATE SQL.PERSONNEL SET SALARY = SALARY * 1.1 WHERE AGE > 30 ...

authorization-identifier

There are two ways of specifying the authorization-identifier of a database table or view.

One way corresponds to the standard SQL syntax, in which the authorization-identifier is separated from the table name by a period. Using this form, the name of the DDM must be the same as the name of the database table without the authorization-identifier.

Example:

DEFINE DATA LOCAL 
01 PERS VIEW OF PERSONNEL 
   02 NAME 
   02 AGE 
END-DEFINE 
SELECT * 
  INTO VIEW PERS 
  FROM SQL.PERSONNEL 
...

Alternatively, you can define the authorization-identifier as part of the DDM name. The DDM name then consists of the authorization-identifier and the database table name separated by a hyphen (-). The hyphen between the authorization-identifier and the table name is converted internally into a period.

Note:
This form of DDM name can also be used with a FIND or READ statement, because it conforms to the DDM naming conventions applicable to these statements.

Example:

DEFINE DATA LOCAL 
01 PERS VIEW OF SQL-PERSONNEL 
   02 NAME 
   02 AGE 
END-DEFINE 
SELECT * 
  INTO VIEW PERS 
  FROM SQL-PERSONNEL 
...

If the authorization-identifier has been specified neither explicitly nor within the DDM name, it is determined by the SQL database system.

In addition to being used in SELECT statements, table names can also be specified in DELETE, INSERT and UPDATE statements.

Examples:

... 
DELETE FROM SQL.PERSONNEL 
  WHERE AGE IS NULL 
 ... 
    
... 
INSERT INTO SQL.PERSONNEL (NAME,AGE) 
  VALUES ('ADKINSON',35) 
... 
    
... 
UPDATE SQL.PERSONNEL 
SET SALARY = SALARY * 1.1 
WHERE AGE > 30 
...

`correlation-name`

The item correlation-name represents an alias name for a table-name. It can be used to qualify column names; it also serves to implicitly qualify fields in a Natural view when used with the INTO clause of the SELECT statement.

Example:

DEFINE DATA LOCAL 
01 PERS-NAME    (A20) 
01 EMPL-NAME    (A20) 
01 AGE          (I2) 
END-DEFINE 
... 
SELECT X.NAME , Y.NAME , X.AGE 
  INTO PERS-NAME , EMPL-NAME , AGE 
  FROM SQL-PERSONNEL X , SQL-EMPLOYEES Y 
  WHERE X.AGE = Y.AGE 
END-SELECT 
...

Although in most cases the use of correlation-names is not necessary, they may help to make the statement clearer.

Parameters

Syntax of item parameter:

[[:sql-type]:] host-variable [INDICATOR [:] host-variable] [LINDICATOR [:] host-variable]

Syntax Element Description:

Syntax Element Description

sql-type

An sql-type specifies the SQL data type of the host-variable when it is used for Db2 access. The specification of sql-type is optional as most SQL data types are implicitly assigned to Natural host-variables. However, for some Natural host-variables the SQL data type cannot be associated implicitly.

sql-type belongs to the SQL Extended Set.

If a sql-type is specified, it has to be surrounded by colons (:). Valid sql-types are:

`sql-type`	Natural Format	Db2 SQL Data Type
BLOBFILE	group(I4,I4,I4,A255)	BLOB file reference(916/917)
CLOBFILE	group(I4,I4,I4,A255)	CLOB file reference(920/921)
DBCLOBFILE	group(I4,I4,I4,A255)	DBCLOB file reference(924/925)
BLOBLOC	(I4)	BLOB locator960/961)
CLOBLOC	(I4)	CLOB locator(964/965)
DBCLOBLOC	(I4)	DBCLOB locator(968/969)

host-variable

A host-variable is a Natural user-defined variable (no system variable) which is referenced in an SQL statement. It can be either an individual field or defined as part of a Natural view.

When defined as a receiving field (for example, in the INTO clause), a host-variable identifies a variable to which a value is assigned by the database system.

When defined as a sending field (for example, in the WHERE clause), a host-variable specifies a value to be passed from the program to the database system.

[:]

Colon:

To comply with SQL standards, a host-variable can also be prefixed by a colon (:). When used with flexible SQL, host-variables must be qualified by colons.

Example:

SELECT NAME INTO :#NAME FROM PERSONNEL 
WHERE AGE = :VALUE

The colon is always required if the variable name is identical to an SQL reserved word. In a context in which either a host-variable or a column can be referenced, the use of a name without a colon is interpreted as a reference to a column.

INDICATOR

INDICATOR Clause:

The INDICATOR clause is an optional feature to distinguish between a "null" value (that is, no value at all) and the actual values 0 or "blank".

When specified with a receiving host-variable (target field), the INDICATOR host-variable (null indicator field) serves to find out whether a column to be retrieved is "null".

Example:

DEFINE DATA LOCAL 
1 NAME      (A20) 
1 NAMEIND   (I2) 
END-DEFINE 
SELECT * 
  INTO NAME INDICATOR NAMEIND 
...

In this example, NAME represents the receiving host-variable and NAMEIND the null indicator field.

If a null indicator field has been specified and the column to be retrieved is null, the value of the null indicator field is negative and the target field is set to 0 or "blank" depending on its data type. Otherwise, the value of the null indicator field is greater than or equal to 0.

When specified with a sending host-variable (source field), the null indicator field is used to designate a null value for this field.

Example:

DEFINE DATA LOCAL 
1 NAME      (A20) 
1 NAMEIND   (I2) 
UPDATE ... 
SET NAME = :NAME INDICATOR :NAMEIND 
WHERE ...

In this example, :NAME represents the sending host-variable and :NAMEIND the null indicator field. By entering a negative value as input for the null indicator field, a null value is assigned to a database column.

An INDICATOR host-variable is of format/length I2.

LINDICATOR

LINDICATOR Clause:

The LINDICATOR clause is an optional feature which is used to support columns of varying lengths, for example, VARCHAR or LONG VARCHAR type.

When specified with a receiving host-variable (target field), the LINDICATOR host-variable (length indicator field) contains the number of characters actually returned by the database into the target field. The target field is always padded with blanks.

If the VARCHAR or LONG VARCHAR column contains more characters than fit in the target field, the length indicator field is set to the length actually returned (that is, the length of the target field) and the null indicator field (if specified) is set to the total length of this column.

Example

DEFINE DATA LOCAL 
1 ADDRESSLIND (I2) 
1 ADDRESS     (A50/1:6) 
END-DEFINE 
SELECT * 
  INTO :ADDRESS(*) LINDICATOR :ADDRESSLIND 
  ...

In this example, :ADDRESS(*) represents the target field which receives the first 300 bytes (if available) of the addressed VARCHAR or LONG VARCHAR column, and :ADDRESSLIND represents the length indicator field which contains the number of characters actually returned.

When specified with a sending host-variable (source field), the length indicator field specifies the number of characters of the source field which are to be passed to the database.

Example:

DEFINE DATA LOCAL 
1 NAMELIND  (I2) 
1 NAME      (A20) 
1 AGE       (I2) 
END-DEFINE 
MOVE  4     TO NAMELIND 
MOVE 'ABC%' TO NAME 
SELECT AGE 
  INTO :AGE 
WHERE NAME LIKE :NAME LINDICATOR :NAMELIND 
  ...

A LINDICATOR host-variable is of format/length I2 or I4. For performance reasons, it should be specified immediately before the corresponding target or source field; otherwise, the field is copied to the temporary storage at runtime.

If the LINDICATOR field is defined as an I2 field, the SQL data type VARCHAR is used for sending or receiving the corresponding column. If the LINDICATOR host-variable is specified as I4, a large object data type (CLOB/BLOB) is used.

If the field is defined as DYNAMIC, the column is read in an internal loop up to its real length. The LINDICATOR field and *LENGTH are set to this length. In case of a fixed length field, the column is read up to the defined length. In both cases, the field is written up to the value defined in the LINDICATOR field.

Let a fixed length field be defined with a LINDICATOR field specified as I2. If the VARCHAR column contains more characters than fit into this fixed length field, the length indicator field is set to the length actually returned and the null indicator field (if specified) is set to the total length of this column (retrieval). This is not possible for fixed length fields greater than or equal to 32 KB (length does not fit into null indicator field).

Include Columns Clause

include-columns

This clause belongs to the SQL Extended Set. It is available in the statements DELETE, INSERT, MERGE and UPDATE.

Syntax of include-columns clause:

INCLUDE (column-name data-type,...)

Syntax Element Description:

Syntax Element	Description
`INCLUDE`	The keyword `INCLUDE` introduces a list of columns that is to be included in the result table of a `DELETE`, `INSERT`, `MERGE` or `UPDATE` statement. `INCLUDE` can only be specified when a `DELETE`, `INSERT`, `MERGE` or `UPDATE` statement is nested in the `FROM` clause of a `SELECT` statement.
`column-name`	Specifies the name of a column of the result table of the `MERGE` statement that is not the same name as another include column or a column in the target table.
`data-type`	Specifies the data type of the include column. See below.

`data-type`

	`built-in-type`
	`distinct-type`

Syntax Element Description:

Syntax Element	Description
`built-in-type`	Specifies a built-in data type. See the IBM Db2 for z/OS documentation for a description of built-in types.
`distinct-type`	Specifies a distinct type.

Period Clause

period-clause

This clause belongs to the SQL Extended Set. It is available in the statements searched DELETE and searched UPDATE.

Syntax:

FOR PORTION
                                 						OF BUSINESS_TIME

FROM expr1 TO expr2

Syntax Element Description:

Syntax Element Description

Syntax Element	Description
`FOR PORTION OF BUSINESS_TIME`	Specifies that the `DELETE` or `UPDATE` only applies to row values for the portion of the `BUSINESS_TIME` period in the row that is specified by the period clause. `BUSINESS_TIME` must be a period that is defined for the table referenced in the `DELETE` and `UPDATE` statement.
`FROM expr1 TO expr2`	Specifies that the update applies to rows for the period that is specified by `FROM expr1 TO expr2`. If the period that is specified by the start value and the end value for the `BUSINESS_TIME` of a row is fully contained in the specified period (if the start value for the period in the row is less than `expr2` and the end value for the period in the row is greater than `expr1`), that row is updated or deleted, and the start and end values for the `BUSINESS_TIME` period remain unchanged. If the period that is specified by the start value and the end value for the `BUSINESS_TIME` of a row is only partially contained in the specified period (if the start value for the period in the row is greater than `expr2` or the end value for the period in the row is less than `expr1`), that row is updated or deleted and then one or two additional rows are inserted. The inserted rows represent the original row values for the periods that were not updated or deleted by the update operation. For the inserted rows, the start value and end value for the `BUSINESS_TIME` are set in such a way that either the start value for the `BUSINESS_TIME` is the start value for the `BUSINESS_TIME` of the original row and the end value is `expr1`, or the start value is `expr2` and the end value is the end value for the `BUSINESS_TIME` of the original row.
`expr1` and `expr2`	Specify expressions that return a value of a built-in data type. The result of each expression must be comparable to the data type of the columns of the specified period. Timestamp with `TIME ZONE` is not allowed as the result data type for `expr1` or `expr2`.

FOR PORTION OF
                              						BUSINESS_TIME

Specifies that the DELETE or UPDATE only applies to row values for the portion of the BUSINESS_TIME period in the row that is specified by the period clause.

BUSINESS_TIME must be a period that is defined for the table referenced in the DELETE and UPDATE statement.

FROM expr1
                              						TO expr2

Specifies that the update applies to rows for the period that is specified by

FROM expr1
                              						TO expr2

If the period that is specified by the start value and the end value for the BUSINESS_TIME of a row is fully contained in the specified period (if the start value for the period in the row is less than expr2 and the end value for the period in the row is greater than expr1), that row is updated or deleted, and the start and end values for the BUSINESS_TIME period remain unchanged.

If the period that is specified by the start value and the end value for the BUSINESS_TIME of a row is only partially contained in the specified period (if the start value for the period in the row is greater than expr2 or the end value for the period in the row is less than expr1), that row is updated or deleted and then one or two additional rows are inserted. The inserted rows represent the original row values for the periods that were not updated or deleted by the update operation. For the inserted rows, the start value and end value for the BUSINESS_TIME are set in such a way that either the start value for the BUSINESS_TIME is the start value for the BUSINESS_TIME of the original row and the end value is expr1, or the start value is expr2 and the end value is the end value for the BUSINESS_TIME of the original row.

expr1 and expr2

Specify expressions that return a value of a built-in data type.

The result of each expression must be comparable to the data type of the columns of the specified period. Timestamp with TIME ZONE is not allowed as the result data type for expr1 or expr2.

Natural Formats and SQL Data Types

The Natural data format of a host-variable is converted to an SQL data type according to the following table:

Natural Format/Length	SQL Data Type
A`n`, A DYNAMIC	CHAR (`n`) , VARCHAR(`n`), CLOB(`n`)
B2 (`COMPOPT DB2BIN=OFF`)	SMALLINT
B4 (`COMPOPT DB2BIN=OFF`)	INT
F4	REAL
F8	DOUBLE PRECISION
I2	SMALLINT
I4	INT
N`nn.m`	NUMERIC (`nn`+`m,m`)
P`nn.m`	NUMERIC (`nn`+`m,m`)
T, A8	TIME
T (`COMPOPT DB2TSTI=ON`)	TIMESTAMP
D, A10	DATE
A26	TIMESTAMP
A19	TIMESTAMP(`0`)
A20+`n`	TIMESTAMP(`n`) (1<=`n`<=12)
A25	TIMESTAMP(`0`) WITH TIMEZONE
A26+`n`	TIMESTAMP(n) WITH TIMEZONE (1<=`n`<=12)
G`n`; for view fields only	GRAPHIC (`n`)
U`n`, U DYNAMIC	GRAPHIC (`n`) ,VARGRAPHIC(`n`), DBCLOB(`n`) CCSID 1200
B`n`, B DYNAMIC (`COMPOPT DB2BIN=ON`)	BINARY(`n`), VARBINARY(`n`), BLOB(`n`)
B`n`, B DYNAMIC (`COMPOPT DB2BIN=OFF`)	CHAR(`n`), VARCHAR(`n`), BLOB(`n`)
P19.0	BIGINT
F8	DECFLOAT(`n`)
A DYNAMIC, B DYNAMIC, U DYNAMIC	XML
Group structure(I4,I4,I4,A255) prefixed with :BLOBFILE:	BLOB-file-reference
Group structure(I4,I4,I4,A255) prefixed with :CLOBFILE:	CLOB-file-reference
Group structure(I4,I4,I4,A255) prefixed with :DBCLOBFILE:	DBCLOB-file-reference
I4 prefixed with :BLOBLOC:	BLOB-locator
I4 prefixed with :CLOBLOC:	CLOB-locator
I4 prefixed with :DBCLOBLOC:	DBCLOB-locator

Natural does not check whether the converted SQL data type is compatible to the database column. Except for fields of format N, no data conversion is done.

In addition, the following extensions to standard Natural formats are available with Natural SQL:

A one-dimensional array of format A can be used to support alphanumeric columns longer than 253 bytes. This array must be defined beginning with index 1 and can only be referenced by using an asterisk (*) as the index. The corresponding SQL data type is CHAR (n), where n is the total number of bytes in the array.
A special host-variable indicated by the keyword LINDICATOR can be used to support variable-length columns. The corresponding SQL data type is VARCHAR (n); see also the LINDICATOR clause.
The Natural formats date (D) and time (T) can be used with Natural for Db2. They are converted to Db2 DATE and TIME.

A sending field specified as one-dimensional array without a LINDICATOR field is converted into the SQL data type VARCHAR. The length is the total number of bytes in the array, not taking into account trailing blanks.