The buffer pool is a storage area into which Natural programs are placed in preparation for their execution. Programs are moved into and out of the buffer pool as Natural users request Natural objects. Conceptually, it serves a function similar to that of an operating system in loading programs in and out of a reentrant area. The Natural buffer pool is an integral part of Natural in all supported environments.
The section covers the following topics:
Natural generates reentrant Natural object code. A compiled program is loaded into the buffer pool and executed from the buffer pool. Thus, it is possible that a single copy of a Natural program can be executed by more than one user at the same time.
This section covers the following topics:
Objects in the buffer pool can be programs, subprograms, maps and global data areas. Global data areas are placed in the buffer pool only for compilation. In this case, two objects with the same name are loaded in the buffer pool: the GDA itself and the corresponding symbol table.
When a Natural object is loaded into the buffer pool, a control block called a directory entry is allocated to this object.
A directory entry contains such information as the name of the object, what library it belongs to, what database ID and Natural system file number the object was retrieved from, and some statistical information (for example, the number of users who are concurrently executing the program at a given point in time).
When a user executes a program, Natural checks the directory entries to see if the program has already been loaded into the buffer pool. If it is not already in the buffer pool, a copy of the program is retrieved from the appropriate Natural system file and loaded into the buffer pool.
When an object is loaded in the buffer pool, one or more other Natural objects which are currently not being executed may be deleted from the buffer pool in order to make room for the newly loaded object. When the new object is loaded, a new directory entry is created in order to identify this object.
When an object is deleted from the system file, it will also be deleted from the buffer pool as soon as it is no longer being used. When an object is newly cataloged or stowed, its old version will also be deleted from the buffer pool as soon as it is no longer being used; when it is requested for execution again, the new version will then be loaded from the system file into the buffer pool.
The actual object code of a program that is loaded into the buffer pool is placed into an area called the text pool and must be allocated as a contiguous piece of memory within this text pool. This text pool is divided into a number of 4 KB buffers. This is an arbitrary size and can be changed at the Natural administrator's discretion. When an object is loaded, one or more text buffers that are contiguous to each other are allocated to store the object code of the object.
This section applies to buffer pools of
TYPE=NAT
only.
To speed up the search time for looking up an object in the buffer pool directory, a hash table is used. The number of entries in the hash table is twice the number of directory entries, rounded up to the next prime number. This will ensure that only half of the table is filled at any point in time and that the probability of collisions is near zero. As a consequence, the average number of tests to find an existing object in the hash table is theoretically less than 2.
The hash criterion is the eight character long program name. If more than one program name is hashed to the same location in the hash table, an overflow technique resolves the collisions.
The storage required for the hash table is roughly 16 bytes per text block. Thus, the available storage in the text pool is reduced by between 1.6% (1 KB text blocks) and 0.1% (16 KB text blocks).
In case of a global buffer pool the initialization occurs during start of the global buffer pool.
In case of a local buffer pool the initialization time varies depending on the environment.
In batch mode and TSO the initialization occurs when you begin the execution of the Natural session.
In a TP monitor environment, the initialization generally occurs when the first user invokes Natural under this TP monitor. Under Com-plete and CICS, it is also possible to initialize the local buffer pool when the TP monitor is started (see also Tip in the section Preload List).
As mentioned earlier and explained below, there are different search methods for allocating space in the buffer pool.
To select a search method, use
The Natural profile parameters
BPMETH
and BPI.
Or the macro
NTBPI
in the Natural parameter module.
Or the function parameter
METHOD of
the global buffer pool.
For a description of these parameters and the macro
NTBPI refer to the Natural Parameter
Reference documentation.
Below is information on the search methods:
- METHOD=S
METHOD=Sindicates that a selection process is used as search algorithm for allocating storage in the buffer pool in order to obtain the space required to accomplish a new load.The selection process used is a combination of search Algorithms 1 and Algorithm 2:
Algorithm 1
Search Algorithm 1 attempts to find storage in the buffer pool that is either free space or space occupied by an unused (active but not used) object.If free space of the exact object size required is found, the selection process ends immediately. Otherwise, the search continues by browsing the buffer pool from top to bottom and comparing the entries in the buffer pool for best size fit. Additionally, in the case of unused objects, the search also considers the last attached time of the object, that is, the time the object was last referenced at a load or locate.
When the selection process has finished, either free space or the space of an unused object with a size greater than or equal to the size requested is selected. The rule of precedence that applies to the search is: free space is taken first and space of unused objects next. In the case of unused objects, the oldest objects are removed first.
If the selection process of Algorithm 1 was not successful, Algorithm 2 is invoked.
Algorithm 2
Search Algorithm 2 starts if Algorithm 1 fails. Algorithm 2 starts searching from a position in the buffer pool which is passed by Algorithm 1 and attempts to combine two or more entities (free storage and/or space occupied by unused objects) in order to obtain the necessary storage for a new load. However, the age of the object is not taken into account.Algorithm 2 continues processing to the bottom of the text record section and, if necessary, wraps around to the top of the text record section to make one final pass from top to bottom. If space is still unavailable, Algorithm 2 fails, the object cannot be loaded and Natural issues a corresponding error message.
- METHOD=N
METHOD=Nindicates that the next available free or unused space is used in order to obtain the space required to accomplish a new load. Unused space is space that is occupied by an active but not used object.The search for the next available space starts from a pointer that moves through the buffer pool in a wrap-around fashion. Any next available buffer pool entries that are free or contain unused objects can be used and possibly chained together to obtain the amount of storage requested.
If the bottom of the buffer pool is reached during an allocation request, the pointer is wrapped around to the top of the buffer pool and one final search is performed through the buffer pool from top to bottom. If the bottom of the buffer pool is reached again and the object cannot be loaded, the load fails and Natural issues a corresponding error message.
METHOD=Ncan especially be considered for large buffer pools in combination with the buffer pool cache function. For details, see also Choosing Search Methods below.- Choosing Search Methods
By default,
METHOD=Sis used. The advantage of this method is, that a diligent search is performed to allocate space, taking into account the size and the age of objects and guaranteeing that the most dispensable unused objects are removed from the buffer pool to provide space for a new load.A disadvantage of
METHOD=Scan be the high CPU time that is consumed by the selection process when browsing the buffer pool from top to bottom.The advantage of
METHOD=Nis the short selection process and, usually, little browsing that require less CPU time for allocating space. This can be significant to large buffer pools.The disadvantage of
METHOD=Nis that objects are selected less carefully for removal from the buffer pool. To avoid an increase in Adabas I/Os for reloading removed objects, we recommend that you useMETHOD=Nin combination with the buffer pool cache function.
Using Natural as supplied on the installation tape, you are running a local buffer pool. This is a buffer pool area that is allocated in the same partition (or region or address space) of the particular environment in use.
For example, in a batch or TSO environment, each user has his/her own local buffer pool. In a TP monitor environment such as Com-plete, CICS or IMS TM, there is one buffer pool per TP monitor from which all TP users execute.
In a z/OS environment, a global buffer pool is allocated from CSA or ECSA storage. In such an environment, all TSO users, batch users and TP monitor users could be executing from one common global area.
For further information on the global buffer pool, see Natural Global Buffer Pool.
This section applies to global and local buffer pools of
TYPE=NAT.
The buffer pool cache is available in conjunction with global and local buffer pools. It is used only for Natural objects (programs, subprograms, maps, etc.), whereas it is not used for example for objects generated by Natural for DL/I.
When a buffer pool is not large enough to take up all objects requested by the different users, special overload strategies are used to replace existing objects with requested objects. The number of overload situations has a direct relation to the efficiency of the buffer pool. The best and most efficient way to reduce the disliked overloads, hence to improve the buffer pool performance, is simply to increase its size.
However, this choice is not applicable at most customer sites, due to a lack of available storage in the primary address space and/or the z/OS (E)CSA.
In order to improve the situation described above, a buffer pool cache is used. The main purpose of this mechanism is to prevent a loss of all objects which were deleted from the buffer pool due to "short-on-buffer-pool-storage" situations. This means, that an object delete results in a "swap out to buffer pool cache". The intended benefit of this feature is a reduction of database calls used for object loading and consequently a performance improvement.
Note for Global Buffer Pools:
The buffer pool cache area is allocated as a data space or as an "above the bar"
64-bit common memory object.
When a data space is created for a buffer pool (by specifying
C64=N), the ownership is assigned to the creator task. If the creator
task terminates, the system automatically deletes the data space. Therefore, a creator
task will remain active for at least as long as the buffer pool cache it owns is in
use, even if the value specified for RESIDENT is N.
When a memory object is created for a buffer pool (by specifying C64=Y),
the ownership is assigned to the system (not the creator task). Because of that, the
memory object is not deleted when the creator task terminates. If you want to keep the
creator task active after it executes its function, you have to specify
RESIDENT=Y.
Note for Local Buffer Pools:
(z/OS only, not for Com-plete and not for IMS TM)
The buffer pool cache is allocated in a data space or in a
memory object "above the bar", that is, in 64-bit memory (z/OS only). When a
data space or memory object is created for a buffer pool (see profile
parameters BPCSIZE and
BPC64),
the ownership is assigned to the creator task. If this task terminates, the
system automatically deletes the data space or the memory object.
The Natural utility SYSBPM (described in the
Natural Utilities documentation) provides statistical
information on the current status of the buffer pool. SYSBPM also
allows you to adjust the buffer pool to your requirements.
The following topics are covered below:
A preload list is a list of objects that will be loaded into the buffer pool and remain there as resident. When a user requests such an object for execution, it is always already in the buffer pool and need not be loaded from the system file.
This may improve performance, may avoid buffer pool fragmentation, or may be useful to ensure that central error transactions are always available, even if the database containing the system file is not active.
At the start of the Natural session, Natural checks which of the
objects on the preload list are already in the buffer pool. Those which are not
will then be loaded from the system file into the buffer pool. This checking
and loading is also performed whenever the buffer pool is connected,
re-connected and re-initialized using the SYSBPM utility. If a global
buffer pool is re-initialized by a
REFRESH
command, no checking takes place for existing Natural sessions. That is, as
long as no new Natural session is started that accesses this buffer pool, the
objects on the preload list are not loaded.
The load of the preload list is not serialized. That means, if multiple Natural sessions start concurrently, each session tries to load all objects named in the preload list into the buffer pool. This may lead to duplicate entries of the same Natural object in the buffer pool (see also hint below).
A preload list is identified by name, and is attached to a
specific buffer pool by specifying its name as startup parameter (for a global
buffer pool) or in the NTBPI
macro (for a local buffer pool). Thus, a different preload list may be defined
for each buffer pool; or the same preload list may be used for different buffer
pools.
If the specified preload list cannot be located, or if objects contained on the preload list cannot be loaded, Natural will issue a corresponding warning message at session initialization. In either case, the preloading will be repeated for each subsequent session initialization.
As the objects on the preload list are the first to be loaded, they are located at the beginning of the buffer pool (except if the initial preloading could not load all objects, in which case the objects may be located anywhere in the buffer pool).
To maintain preload lists, you use the
SYSBPM utility,
see SYSBPM - Preload List
Maintenance in the Natural Utilities
documentation.
Tip:
To avoid problems with
the load of the objects on a preload list by user sessions the following
procedure is recommended:
For a global buffer pool:
Immediately after the allocation or refresh of the global
buffer pool, start a batch Natural session that accesses the global buffer pool
and that executes a FIN.
For a local buffer pool under CICS and Com-plete:
During startup of the TP system, start an asynchronous
Natural session that access the local buffer pool, and put a
FIN
command on the Natural stack. Ensure that this Natural session references the
name of the preload list in its
NTBPI
macro.
To prevent a Natural object from being executed, you can put it on a so-called "blacklist": the object can then not be loaded into the buffer pool; and if it is already in the buffer pool, it cannot be executed. A user requesting such an object to be executed will then receive an appropriate error message.
You can put not only individual objects on the blacklist, but also entire libraries.
The blacklist may be useful, when you upgrade a Natural application and do not wish users to continue to work with that application until you have finished the upgrade. Without the blacklist, a user might execute a new module which in turn would invoke an old module - which might lead to an abnormal termination of the Natural session. With the blacklist, the user can will receive a message that the requested object can currently not be executed, and can then continue his/her Natural session.
Performance aspects may be another reason for using the blacklist to prevent certain resource-consuming objects from being executed in a specific environment.
You may use the blacklist to prevent the execution of test programs in a production environment.
To maintain the blacklist, you use the
SYSBPM utility.
See SYSBPM - Blacklist
Maintenance in the Natural Utilities
documentation.
Note:
Under z/OS, the propagation of buffer-pool changes is always
restricted to the Natural subsystem in which the change has occurred (for
details on the Natural subsystem, see
Natural Subsystem
(z/OS). Thus, "all global buffer pools" in
this context means "all global buffer pools within the same
subsystem".
In some environments, it is important that changes which occur in one (local or global) buffer pool are also propagated to all other global buffer pools - that is, the same changes are also automatically made in the other global buffer pool - so as to ensure the consistency of the buffer pools and the Natural applications being used. This is particularly important in a z/OS Parallel Sysplex environment.
For example, if a Natural program is newly cataloged in one z/OS image, the propagation will cause the program to be deleted from all other global buffer pools in the z/OS Parallel Sysplex environment, so that its new version has to be loaded from the system file when the program is to be executed again.
The following changes are propagated:
an object is deleted from the buffer pool,
the buffer pool's blacklist is modified,
the buffer pool is re-initialized.
Changes can be propagated to all other global buffer pools within the current z/OS image, or within the entire z/OS Parallel Sysplex environment, or all other global buffer pools of the same name within the z/OS Parallel Sysplex environment.
The propagation does not affect those objects in another global buffer pool which are defined as resident in that buffer pool.
The propagation is activated and its scope controlled by the
Natural profile parameter BPPROP.
Note:
As the propagation is performed asynchronously and an object
is only deleted from a buffer pool when it is not longer being used, it may
take some time until the current version of an object is available in all
buffer pools.
Propagation to other local buffer pools is not possible.
For general advice on performance-related issues regarding the buffer pool and the BP cache, see Performance Considerations in the section SYSBPM Utility - Buffer Pool Management of the Natural Utilities documentation.
The Natural global buffer pool is an optional Natural component.
It is available for the following operating systems
z/OS (refer to Global Buffer Pool under z/OS)
The following Natural profile parameters are used to establish a global buffer pool:
BPNAME |
Specifies the name of the global buffer pool (see
BPNAME).
BPNAME=' ' (blank) is used to establish a connection to the
local buffer pool.
|
SUBSID |
Specifies the ID of the Natural subsystem to be used
(see profile parameter SUBSID).
|
During Natural startup, Natural attempts to locate the global buffer pool using these parameters.
With the NTBPI
macro of the Natural parameter module or the corresponding profile parameter
BPI, you can
define more than one buffer pool.
At session initialization, Natural attempts to establish a connection to the first buffer pool defined. If this fails, Natural attempts to establish a connection to the second buffer pool defined. If that fails, too, it tries the next buffer pool defined, etc. Whenever an attempt to establish a connection to a buffer pool fails, Natural will issue a corresponding message.
The same procedure applies when a buffer pool is stopped: if you close the currently connected buffer pool while a Natural session is still active, Natural attempts to connect to another buffer pool (in the order in which they are defined) and continue the session. Thus, it is possible for the Natural administrator to close a global buffer pool without having to terminate all active Natural sessions.