Message Buffer Pool Messages
This section contains the messages that may be issued by the message
buffer pool.
For information on this buffer pool, see
Message Buffer
Pool in the Operations
documentation.
MTBP001 - Work buffer could not be obtained
| Explanation |
Work buffer could not be obtained. |
| Action |
Check if there is memory saturation on your
system.
|
MTBP002 - Bad return code from IEANTRT:
xxxx
| Explanation |
Bad return code from IEANTRT:
xxxx.
|
| Action |
Contact Software AG Support. |
MTBP003 - Bad return code from IEANTCR:
xxxx
| Explanation |
Bad return code from IEANTCR:
xxxx.
|
| Action |
Contact Software AG Support. |
MTBP004 - Allocation of an ECSA directory segment failed:
xxxx
| Explanation |
Allocation of an ECSA directory segment failed:
xxxx.
|
| Action |
Contact Software AG Support. |
MTBP005 - A recursive abend occurred. Now waiting for CANCEL
cmd.
| Explanation |
A recursive abend occurred. Now waiting for CANCEL
command.
|
| Action |
Contact Software AG Support. |
MTBP006 - Message BP handler is active
| Explanation |
A Message Buffer Pool handler can only be started once
for the same subsystem ID.
|
| Action |
None. |
MTBP007 - Other than MODIFY or STOP command received
| Explanation |
The received command is different from MODIFY or STOP.
|
| Action |
Use only MODIFY or STOP TSO commands. No other TSO
commands are allowed.
|
MTBP008 - Received command:
xxxx
| Explanation |
This is the command that has been issued. |
| Action |
None. |
MTBP009 - Invalid command, nothing specified
| Explanation |
Invalid command, nothing specified. |
| Action |
Specify a valid command. |
MTBP010 - Negative command/keyword length encountered
| Explanation |
Negative command/keyword length encountered. |
| Action |
Contact Software AG Support. |
MTBP011 - Invalid command:
xxxx
| Explanation |
The issued command is unkown or not allowed. |
| Action |
Specify a valid command. |
MTBP012 - More than one command:
xxxx
| Explanation |
More than one command:
xxxx.
|
| Action |
Contact Software AG Support. |
MTBP013 - Invalid parameter keyword:
xxxx
| Explanation |
Invalid parameter keyword:
xxxx.
|
| Action |
Specify valid parameter keyword(s). |
MTBP014 - Invalid BPNAME specified
| Explanation |
The syntax of the buffer pool name is not correct.
|
| Action |
Check the syntax of the buffer pool name. |
MTBP015 - Invalid SUBSID specified
| Explanation |
The syntax of the subsystem-ID is not correct. |
| Action |
Check the syntax of the subsystem-ID. |
MTBP016 - Invalid SIZE specified
| Explanation |
Invalid SIZE specified. |
| Action |
Specify the size of the message buffer pool as an
integer value in the correct range.
|
MTBP017 - Buffer pool is already allocated:
xxxx
| Explanation |
The specified buffer pool name is already active. You
cannot have more than one job for a given buffer pool.
|
| Action |
None. |
MTBP018 - Allocation of IDT segment failed:
xxxx
| Explanation |
Allocation of IDT segment failed:
xxxx.
|
| Action |
Contact Software AG Support. |
MTBP019 - DSPSERV CREATE failed with reason:
xxxx
| Explanation |
DSPSERV CREATE failed with reason:
xxxx.
|
| Action |
Contact Software AG Support. |
MTBP020 - ALESERV ADD failed with return code:
xxxx
| Explanation |
ALESERV ADD failed with return code:
xxxx.
|
| Action |
Contact Software AG Support. |
MTBP021 - Subsystem not active:
xxxx
| Explanation |
Message Buffer pool must be started after
NATASMvr and/or
NATRSMvr.
|
| Action |
Start NATASMvr and/or
NATRSMvr before starting
NATMBPvr.
|
MTBP022 - Buffer pool not active:
xxxx
| Explanation |
Buffer pool not active:
xxxx.
|
| Action |
Contact Software AG Support. |
MTBP023 - ALESERV DELETE failed with return code:
xxxx
| Explanation |
ALESERV DELETE failed with return code:
xxxx.
|
| Action |
Contact Software AG Support. |
MTBP024 - DSPSERV DELETE failed with reason code:
xxxx
| Explanation |
DSPSERV DELETE failed with reason code:
xxxx.
|
| Action |
Contact Software AG Support. |
MTBP025 - Message BP is deactivated now:
xxxx
| Explanation |
This is an information message. |
| Action |
None. |
MTBP026 - Message BP is active now:
xxxx
| Explanation |
This is an information message. |
| Action |
None. |
MTBP027 - Buffer pool table is full.
| Explanation |
Buffer pool table is full. |
| Action |
Contact Software AG Support. |
MTBP028 - Other than MODIFY or STOP command received
| Explanation |
The received command is different from MODIFY or STOP.
|
| Action |
Use only MODIFY or STOP TSO commands. No other TSO
commands are allowed.
|
MTBP029 - Allocation of LX memory failed:
xxxx
| Explanation |
Allocation of LX memory failed:
xxxx.
|
| Action |
Contact Software AG Support. |
MTBP030 - DDNAME missing for input file:
xxxx
| Explanation |
DDNAME missing for input file:
xxxx.
|
| Action |
Make sure a dataset with the given DDNAME is specified
in the JCL.
|
MTBP031 - DDNAME not specified or invalid
| Explanation |
The syntax of the DDNAME is invalid, or no DDNAME is
specified at all.
|
| Action |
Check the syntax of DDNAME. |
MTBP032 - OPEN for command input file failed:
xxxx
| Explanation |
OPEN for command input file failed:
xxxx.
|
| Action |
Check the access level of the specified
dataset.
|
MTBP033 - No Zaps are applied
| Explanation |
No Zaps are applied. |
| Action |
Contact Software AG Support. |
MTBP034 - DD statement for SNAP missing:
xxxx
| Explanation |
DD statement for SNAP missing:
xxxx.
|
| Action |
Make sure that there is a DDNAME for a SNAP
dump.
|
MTBP035 - OPEN for SNAP failed:
xxxx
| Explanation |
OPEN for SNAP failed: xxxx.
|
| Action |
Conact Software AG Support. |
MTBP036 - DDNAME too long.
| Explanation |
A DDNAME must have a length between 1 and 8
characters.
|
| Action |
Check the length of the DDNAME. |
MTBP037 - Invalid value specified for AREA
| Explanation |
Invalid value specified for AREA. |
| Action |
Specify a valid value for AREA
(ALL|HT|TEXT|CB|COMM).
|
MTBP038 - Invalid BPLIST specified
| Explanation |
Invalid BPLIST specified. |
| Action |
Specify a name with a length between 1 and 8
characters.
|
MTBP039 - Buffer pool poolname owned
by other task
| Explanation |
There is a sharing conflict with the buffer pool.
|
| Action |
Check if another active configuration is using the
same pool name.
|
MTBP040 - Startup parameter:
parameter
| Explanation |
The startup parameters are echoed to JESMSGLG. |
| Action |
None. |
MTBP041 - Operator command:
command
| Explanation |
The Message Buffer Pool Server echoes operator
commands to JESMSGLG.
|
| Action |
None. |
MTBP042 - OPEN command file:
filename
| Explanation |
The name of the command file is echoed to
JESMSGLG.
|
| Action |
None. |
MTBP043 - CLOSE command file:
filename
| Explanation |
The name of the command file is echoed to
JESMSGLG.
|
| Action |
None. |
MTBP044 - Wrong ECSAD version:
version
| Explanation |
The Message Buffer Pool Server is started while there
is still an ECSA-Directory present for another version of the Message Buffer
Pool Server for this subsystem-ID.
|
| Action |
Rename the subsystem-ID, IPL the system, or start
NATASMvr with option ECSADUPD.
|
MTBP045 - Dataspace created: dataspace
name, token,
ALET, TaskId
| Explanation |
Diagnostic message for Software AG Support. |
| Action |
Report the SYSOUT containing this message
to Software AG Support when requested.
|
