Natural System Error Messages 9950-9999

NAT9964: NAT9964 Error occurred during session initialization.

Text
NAT9964 Error occurred during session initialization.
Explanation
During the initialization of Natural batch processing, an error has
occurred. Batch processing has continued after the error, because
parameter ITERM=OFF was set. The session terminates with return
code "4".
Action
Correct the error as indicated by the preceding error messages.

NAT9965: Natural termination forced by administrator - :1:.

Text
Natural termination forced by administrator - ....
Explanation
The session has been marked for termination by the Review for Natural
command TERMNAT within the Review SYSRNM administrator application.
When the session resumes after a terminal I/O, it is terminated.
The user ID ... of the Review SYSRNM administrator is indicated
at the end of the message.
Action
None.

NAT9966: Session terminated due to license check failure.

Text
Session terminated due to license check failure.
Explanation
The session terminated due to a problem with your product license.
Natural cannot start without a valid license.  The license module
is either not linked or invalid or insufficient for your environment.
Action
Check the session initialization error messages for more detailed
information about the problem. If you have no correct license
file, please contact Software AG.

NAT9967: Termination forced by unhandled LE condition - :1:.

Text
Termination forced by unhandled LE condition - ....
Explanation
During the execution of an LE (IBM Language Environment) subprogram,
an error condition has occurred. As no condition handler was active
in the subprogram to handle the error, control has been passed
to the Natural LE condition handler, which calls LE services to write
an LE snap dump to CEEDUMP and to issue more detailed LE error messages.
Accordung to the DU profile parameter, Natural has been terminated
with a dump.
Action
Check the LE error condition, the messages and the snap dump to find
out the reason of the error. If necessary, correct the LE subprogram.

NAT9968: Natural termination forced by DUE - :1: :2: :3:.

Text
Natural termination forced by DUE - :1: :2: :3:.
Explanation
Error :3: has occurred, and Natural has been terminated with a dump.
The Natural program :1: has caused the error on line number :2:.
:3: is the error message ID which was defined by profile parameter
parameter DUE to get a dump.
If :1: and :2: are missing, there wasn"t any program active when the
error occurred.
Action
Analyse the dump which has been produced, and correct the error.
If necessary, contact Software AG Support.

NAT9969: Natural escaped from error loop - :1: :2: NAT:3:.

Text
Natural escaped from error loop - prog line NATnnnn.
Explanation
An error loop has occurred, and Natural has been terminated.
 prog     - is the name of the program which caused the error.
 line     - is the number of the source-code line which caused the
            error.
 NATnnnn  - is the number of the last error which occurred before
            NAT9969 was issued.
Action
If necessary, contact Software AG Support.

NAT9970: Natural initialization failed due to ITERM=ON.

Text
Natural initialization failed due to ITERM=ON.
Explanation
During the initialization of Natural, an error condition occurred.
This message is preceded by one or more other Natural error messages.
The session is terminated because profile parameter ITERM=ON is set.
Action
Correct the error as indicated by the preceding error messages,
or set ITERM=OFF (not possible with STACK=INPL).

NAT9971: Session terminated by front-end driver - RC=:1:.

Text
Session terminated by front-end driver - RC=:1:.
Explanation
During session initialization, the environment- dependent driver
has detected a crucial error and the session cannot be continued.
RC=:1: indicates the driver-error reason code.
Action
Contact Software AG Support.

NAT9972: Natural module missing or invalid - :1:.

Text
Natural module missing or invalid - :1:.
Explanation
During initialization Natural has detected that the module :1:
is missing or its maintenance level does not match.
Action
Link the correct module to the Natural nucleus and restart Natural.

NAT9973: Abend :1: :2:.

Text
Abend :1: :2:.
Explanation
An unexpected internal runtime error has occurred. The session was
terminated and a dump was produced.
:1: is name of the nucleus component which caused the error.
:2: contains additional error information (optional).
Action
Save the dump and contact Software AG Support.

NAT9974: Natural termination forced by abend :1:.

Text
Natural termination forced by abend ....
Explanation
Natural has been abnormally terminated after the abend condition
shown in the error message has occurred, and the profile parameter DU=ON
was set. The abend condition was set by the operating system and/or
TP system in use. For an explanation of the abend condition, see
the appropriate operating-system or TP-system documentation.
Possible abend conditions are, for example:
"S0C7" - data exception,
"AICA" - possible loop under CICS,
"ATCH" - task cancelled by operator (CICS).
If the abend occurred during Adabas call processing, the indicator
ADABAS is added after the abend code.
Action
Analyse the dump which has been produced, and correct the error.
If necessary, contact Software AG Support.

NAT9975: Back-end program not found - :1:.

Text
Back-end program not found - :1:.
Explanation
The Natural session was terminated normally, but the program :1:,
which should receive control after the session termination
(as specified with the profile parameter PROGRAM), could not be found.
Action
Make sure that the correct program name is specified with the PROGRAM
parameter and the program is contained in the appropriate library.

NAT9976: Initialization buffer too small.

Text
Initialization buffer too small.
Explanation
Natural could not be initialized because there was not enough space
in the initialization buffer. The size of this buffer is determined
by the profile parameter ISIZE.
Action
Increase value for ISIZE parameter in the Natural parameter module,
then start Natural session again.

NAT9977: Permanent I/O error during input processing.

Text
Permanent I/O error during input processing.
Explanation
During batch processing, Natural did not receive any input data.
Or:
During online processing, this message is issued to the console
in case of an I/O error, because in such a case the associated output
device is considered to be inoperational.
Action
Make sure input data are passed correctly to Natural.

NAT9978: Error occurred during execution/compilation.

Text
Error occurred during execution/compilation.
Explanation
During Natural batch processing, an error has occurred when a program
was being compiled or executed. Batch processing was continued after
the error. The session was terminated with return code "4".
Action
Check the output protocol for any error messages.
Correct the error, and re-run the batch job if necessary

NAT9979: Terminal converter module not linked - :1:

Text
Terminal converter module not linked - ...
Explanation
Natural was invoked with terminal type ... which cannot be supported
because the corresponding converter module for this terminal type has
not been linked to the Natural nucleus or is incompatible with the
current environment.
Action
Link the missing module to the Natural nucleus or specify a correct
terminal type by means of the profile parameter TTYPE.

NAT9980: Nucleus module does not reside in residentpage - :1:.

Text
Nucleus module does not reside in residentpage - ....
Explanation
The called program is not loaded as a Com-plete resident program.
Action
Load the program as a Com-plete resident program.

NAT9981: GETMAIN for back-end program data failed.

Text
GETMAIN for back-end program data failed.
Explanation
The size requested for the back-end program data cannot be allocated
in the Natural thread.
Action
Increase the thread size.

NAT9982: Error occurred during session termination.

Text
Error occurred during session termination.
Explanation
An error has occurred during session termination.
The corresponding error message has been issued before.
Action
Check the corresponding error message and correct the error
if necessary.

NAT9983: Conversation I/O requested, nucleus/thread displaced.

Text
Conversation I/O requested, nucleus/thread displaced.
Explanation
The nucleus and/or the thread has been displaced during the last
terminal I/O.
Action
Place the Natural nucleus in the (E)LPA and/or do not specify
RELO=FORCE/ON.

NAT9984: Natural address relocation failed - RC=:1:.

Text
Natural address relocation failed - RC=....
Explanation
An internal error has occurred.
Action
Contact Software AG support.

NAT9985: Thread-locked sessions cannot be recovered.

Text
Thread-locked sessions cannot be recovered.
Explanation
Com-Plete tries to recover a Natural session, which is not possible
as the session runs in RELO=OFF mode.
The session must be terminated.
Action
Restart session with RELO=ON.

NAT9986: Natural parameter module missing or invalid.

Text
Natural parameter module missing or invalid.
Explanation
Either no Natural parameter module has been linked to the Natural
environment dependant nucleus, or the parameter module is invalid,
e.g. it was assembled against a Natural macro library of an older
version or an older maintenance level.
Action
Re-assemble the Natural parameter module using the macro library of
the current maintenance level and link it to the Natural nucleus.

NAT9987: Natural session terminated abnormally - RC=:1:.

Text
Natural session terminated abnormally - RC=:1:.
Explanation
The Natural session was terminated by a TERMINATE statement with
return code :1: in a Natural program.
Action
No action required.

NAT9988: Invalid system file information.

Text
Invalid system file information.
Explanation
The database ID and/or file number of the Natural system file FNAT
have been changed, but the Natural system environment has not been
adjusted to this change.
Action
Use function "A" of the INPL utility to adjust the system environment.

NAT9989: Natural versions do not agree.

Text
Natural versions do not agree.
Explanation
During initialization, Natural checks whether the versions of the
environment-dependent interface and the Natural shared nucleus
are of the same Natural major and minor version.
Action
Re-assemble and re-link the environment-dependent interface with
the correct Natural macro and link libraries.

NAT9990: Natural initialization failed.

Text
Natural initialization failed.
Explanation
During initialization of Natural, an error condition occurred which
does not allow for continuation of the Natural session.
This message is preceded by one or more other Natural error messages.
Action
Correct error as indicated by preceding error messages.

NAT9991: Required module not linked - :1:.

Text
Required module not linked - :1:.
Explanation
During initialization Natural has detected that module :1: is missing.
The module is required to run the Natural nucleus.
Action
Link the missing module to the Natural nucleus and restart Natural.

NAT9992: Session terminated due to unrecoverable abend :1:.

Text
Session terminated due to unrecoverable abend :1:.
Explanation
During the attempt to recover the Natural session from abend :1:,
another abend has occurred. To avoid an abend loop, the Natural
session was terminated.
Action
Analyse the dump which has been produced, and correct the error.
If necessary, contact Software AG Support.

NAT9993: Adabas link module missing or invalid - :1:.

Text
Adabas link module missing or invalid - :1:.
Explanation
The Adabas link module :1: specified by profile parameter ADANAME
cannot be loaded or is invalid. Either the load library is
missing or invalid, or the specified module does not exist
or has been linked incorrectly.
Action
Ensure that the correct load library is attached to the Natural
session and that it contains the correct Adabas link module.

NAT9994: Dynamic parameter string is too long.

Text
Dynamic parameter string is too long.
Explanation
The character string supplied as dynamic parameters at the start of
the Natural session is too long. It must not exceed 32767 characters.
This includes the dynamic parameters read from the CMPRMIN file.
Action
Restart the Natural session with fewer dynamic parameters.

NAT9995: Natural session terminated normally.

Text
Natural session terminated normally.
Explanation
The Natural session for this terminal/user was terminated without
any error conditions.
Natural was terminated by one of the following actions:
- entering the command FIN in NEXT/MORE mode,
- entering the command %% in NEXT mode,
- pressing the CLEAR key in NEXT mode,
- executing the statement TERMINATE in a Natural program.
Action
No action required.

NAT9996: Unable to load Natural nucleus module - :1: :2:.

Text
Unable to load Natural nucleus module - :1: :2:.
Explanation
Natural could not load its shared or reentrant nucleus module :1:.
The front-end part of Natural attempted a TP- or OS-dependent load
request and received error condition :2:.
Action
Check the shared nucleus name specified by the NUCNAME parameter or
re-link the reentrant part with a corresponding name. Check whether
the correct load library is accessible by Natural.

NAT9997: Not enough memory to start Natural - :1: :2:K RC=:3:.

Text
Not enough memory to start Natural - :1: :2:K RC=:3:.
Explanation
Natural was not able to acquire all required storage buffers.
These buffers are used for user area, terminal area, I/O areas,
file buffers, etc. If one of the storage acquisition calls fails,
Natural cannot be initialized. Additional information as follows:
  :1:   buffer type (as documented in NATCONFG),
  :2:   buffer size (in KB),
  :3:   return code from the GETMAIN request:
           04 = Not enough storage.
           08 = Invalid buffer type.
           10 = Duplicate buffer type.
           18 = Invalid buffer length.
           1C = Buffer type not defined in NATCONFG.
           30 = Module NATCONFG not linked.
           34 = Physical GETMAIN failed.
Action
           34 = Physical GETMAIN failed.
RC=04/34: Reduce buffer sizes or assign a larger thread/partition.
The other return codes indicate a product error; contact Software AG
support.

NAT9998: I/O error on input file - :1:.

Text
I/O error on input file - :1:.
Explanation
An I/O error occurred during batch processing on an input file,
e.g. CMSYNIN or CMOBJIN. :1: indicates the name of the input file.
Action
Check for operating-system error messages in the job log and correct
the error.

NAT9999: I/O error on output file - :1:.

Text
I/O error on output file - :1:.
Explanation
An I/O error occurred during batch processing on an output file,
e.g. CMPRINT. :1: indicates the name of the output file.
Action
Check for operating-system error messages in the job log and correct
the error.