Natural System Error Messages 2650-2699

NAT2650: Comment lines range between 0 and 16.

Text	Comment lines range between 0 and 16.
Explanation	No more than 16 comment lines are supported by Predict. The mimimum is zero.
Action	Enter a value between zero and 16.

NAT2651: If gen. FB = "Y", DSECT = "N" and DS/DC = "DC" must entered.

Text

If gen. FB = "Y", DSECT = "N" and DS/DC = "DC" must entered.

Explanation

If a format buffer should be generated, then DSECT="N" must be declared
and the DS/DC option must set to "DC".

Action

Enter "N" for DSECT option and "DC" for "DS/DC" option.

NAT2652: Format buffer only for file-type "A" or "U".

Text	Format buffer only for file-type "A" or "U".
Explanation	Format buffers can only be generated for Adabas files or Userviews.
Action	Enter "N" for format buffer.

NAT2653: File not found.

Text	File not found.
Explanation	To generate copy code, a valid file name must be entered.
Action	Enter a valid file name.

NAT2654: Key not allowed for VSAM "RRDS" files.

Text	Key not allowed for VSAM "RRDS" files.
Explanation	The specification of a descriptor type for a VSAM "RRDS" file is not allowed.
Action	Use another file organization or delete the specified key.

NAT2655: Date is invalid.

Text	Date is invalid.
Explanation	The entered date has wrong format or values. The date must be specified in the following format : JJ-MM-DD.
Action	Enter a valid date.

NAT2656: Enter "DS" or "DC".

Text	Enter "DS" or "DC".
Explanation	In the assembler generation, either the "DC" or the "DS" statements are used to define storage. Select the desired statement.
Action	Enter "DS" or "DC".

NAT2657: Enter "Y" or "N".

Text	Enter "Y" or "N".
Explanation	Only "Y" or "N" allowed for this Input-field.
Action	Correct error.

NAT2658: Generated code saved.

Text	Generated code saved.
Explanation	The generated code has been saved as member in the specified library.

NAT2659: Code generated in source area.

Text	Code generated in source area.
Explanation	The generated code is stored in the source area for further editing. The GENERATION function terminates successfully.

NAT2660: Generation terminated abnormally.

Text

Generation terminated abnormally.

Explanation

An error occurred during the generation either of COBOL copy code,
of PL/1 include code, of assembler copy code, or of Data Definition
Modules. The error has been displayed on the screen preceding
this message.

Action

Correct the error and restart the generation.

NAT2661: Duplicate names found.

Text	Duplicate names found.
Explanation	Duplicate names were found during generation of copy code. For example, field names are truncated when they are too long.
Action	Correct field names in the file.

NAT2662: Copycode generation for conceptual and standard files impossible.

Text

Copycode generation for conceptual and standard files impossible.

Explanation

An attempt was made to generate copy code for a conceptual or a standard
file. This is not possible since copy code can be generated only for
real file types, i.e., Adabas files, Userviews, VSAM, etc.

Action

Do not generate copy code for conceptual or standard files.

NAT2663: Level increment is a number from 1 to 40.

Text	Level increment is a number from 1 to 40.
Explanation	The specified level increment must be in the value range 1 thru 40.
Action	Correct the value of the level increment.

NAT2664: Start level is a number from 1 to 40.

Text	Start level is a number from 1 to 40.
Explanation	Enter a start level greater than zero.

NAT2665: More than one primary key found.

Text	More than one primary key found.
Explanation	Only one element can be specified as primary key.
Action	Modify the primary key definition.

NAT2666: No primary key found.

Text	No primary key found.
Explanation	One primary key must defined for this VSAM file.
Action	Specify one primary key.

NAT2667: Generated code replaced.

Text

Generated code replaced.

Explanation

At generation time Predict checks whether the target library / member
where the generated code is to be stored, exists or not. As you told
Predict to replace the old code by the recently generated one and
Predict found an old code, it has been replaced.

NAT2668: No files need to be regenerated.

Text	No files need to be regenerated.
Explanation	No file modified after generation.

NAT2669: Format may not be alpha for counter field.

Text	Format may not be alpha for counter field.
Explanation	A counter field is a numeric field. The format must be "N", "P", "U", "B" or "I".
Action	Change the format to numeric.

NAT2670: Input file is not an USER VIEW or SEQ. file.

Text

Input file is not an USER VIEW or SEQ. file.

Explanation

In Adabas V5.1 the input data of the ADACMP utility can be described
as USER VIEW of the Adabas file or as file of type "S" (sequentiell).

Action

Enter correct file name.

NAT2671: DDM already exists.

Text

DDM already exists.

Explanation

This message is a warning. It has been issued because REPLACE
option = "N" has been entered and an older Data Definition Module
was found. The existing DDM has not been replaced.

Action

Enter REPLACE option = "Y".

NAT2672: No keys allowed for "PE" or "MU".

Text	No keys allowed for "PE" or "MU".
Explanation	No key definition for periodic groups and multiple fields in vsam files are allowed.
Action	Enter blank in the key field.

NAT2673: Field is not connected to a standard file.

Text

Field is not connected to a standard file.

Explanation

If you mark a field as non-standard and the field is not connected
to a standard file this message will be sent.

Action

Delete the non-standard flag.

NAT2674: Database number invalid.

Text

Database number invalid.

Explanation

The Adabas database number must not exceed 254. Database number 255
are reserved for internal use. In Natural V1.2 the database number 254
is reserved for the VSAM database.

Action

Enter a valid database number.

NAT2675: File number (FNR) invalid.

Text	File number (FNR) invalid.
Explanation	Adabas supports only 255 different files.
Action	Enter a number less than 256.

NAT2676: Primary sequence field not in file.

Text

Primary sequence field not in file.

Explanation

The primary sequence field specifies the default descriptor with which
the file should be read. This field must belong to the file.

Action

Correct the primary sequence field.

NAT2677: Target database not active.

Text	Target database not active.
Explanation	The target database must be active if Data Definition Modules are generated for it.
Action	Initiate the target database.

NAT2678: Input file is not a USER VIEW of the Adabas file.

Text

Input file is not a USER VIEW of the Adabas file.

Explanation

In Adabas V5.1 the input data of the ADACMP utility can be described
as corresponding USER VIEW of the entered Adabas file.

Action

Enter correct INPUT File ID or define input data as USER VIEW of the
Adabas file or as sequentiell file.

NAT2679: File ID must be entered.

Text	File ID must be entered.
Explanation	The File ID is a mandatory parameter for this function.
Action	Enter a valid File ID.

NAT2680: Database has no number.

Text

Database has no number.

Explanation

At GENERATION DDM from a file, the specified database-id
must have a number, because the DDM depends on the database number.
If no database-id is entered, database number 0 is set in the DDM.
In this case the database number will be taken at runtime out of the
parameter facilities (ADAPARM module, dynam. Natural parameter,..).

Action

Enter a database with a valid number or set database-id to BLANK.

NAT2681: Primary sequence field is not a descriptor.

Text

Primary sequence field is not a descriptor.

Explanation

The primary sequence field defines the default descriptor by which
the file should be read. If the primary sequence field is not a
descriptor, no valid READ statement results for the default. The
Data Definition Module was not generated for this reason.

Action

Enter a valid primary sequence field, i.e., a descriptor.

NAT2682: An Adabas error occurred.

Text	An Adabas error occurred.
Explanation	The listed Adabas response code occurred.
Action	See the DBA.

NAT2683: Enter program name or "*".

Text

Enter program name or "*".

Explanation

If you want to delete the xref data of a program you have to
specify the program name or "*". The asterisk should be entered
if preprocessor abends data should be deleted.

Action

Enter program name or "*".

NAT2684: Missing command.

Text

Missing command.

Explanation

The conversion for Predict Version 1 data to Predict Version 2 data
was invoked in batch mode. As no command was supplied the
command processor isssues this message.

Action

Restart the batch session and supply some valid commands.

NAT2685: The DDM to be incorporated is not a VSAM DDM.

Text	The DDM to be incorporated is not a VSAM DDM.
Explanation	You have tried to incorporate a DDM which is not of type VSAM.
Action	Check type of DDM.

NAT2686: File is not security protected.

Text	File is not security protected.
Explanation	The file is not security protected. Therefore, no security definitions can be generated.
Action	Do not generate security definitions for unprotected files.

NAT2687: Source field for sub-/super-descriptor not in DDM.

Text

Source field for sub-/super-descriptor not in DDM.

Explanation

The field specified in the sub-/super-descriptor definition is not
defined as field in the DDM. The sub-/super-descriptor is only
allowed to refer fields defined in the DDM.

Action

Check source field names of the sub-/super-descriptor.

NAT2688: File is of wrong type.

Text

File is of wrong type.

Explanation

Data Definition Modules can only be generated for Adabas files
and Userviews of the Adabas file or VSAM files and their Userviews.

Action

(only files of type "A","U","V","R","L" or "W" allowed)
Enter a valid file.

NAT2689: Max. 90 sub-/super-descriptors can be incorporated.

Text	Max. 90 sub-/super-descriptors can be incorporated.
Explanation	The incorporated VSAM DDM contains more than 90 sub-/super-descriptors. Only 90 descriptors can be incorporated.

NAT2690: File is not an Adabas file.

Text	File is not an Adabas file.
Explanation	The generation of ADAWAN/ADACMP or Adabas security definitions can only be executed for Adabas files.
Action	Check file type.

NAT2691: Only F, FB, V, VB, U or blank allowed.

Text

Only F, FB, V, VB, U or blank allowed.

Explanation

The RECORD FORMAT at GENERATION ADAWAN/ADACMP definitions must be:
    F---fixed
    FB--fixed blocked
    V---variable
    VB--variable blocked
    U---unblocked
   " "--not specified

Action

Correct error.

NAT2692: Duplicate file record found.

Text

Duplicate file record found.

Explanation

Predict does not allow duplicate names within the same object types
This message is issued, if such an inconsistency is encountered.
The duplicate records are deleted by the MIGRATE utility
during the unload file process.

Action

Unload and load your file by the MIGRATE utility.

NAT2693: Security definition already exists.

Text	Security definition already exists.
Explanation	If you want to generate a DDM for which a security definition exists this message will be sent.
Action	Change security definiton if necessary.

NAT2694: Cipher-code must be entered.

Text	Cipher-code must be entered.
Explanation	The data should be loaded into the database in ciphered form.
Action	Enter cipher-code or contact your DBA.

NAT2695: The specified objects have been unloaded successfully.

Text	The specified objects have been unloaded successfully.
Explanation	The objects have been unloaded successfully to work file 1.

NAT2696: No object was found.

Text	No object was found.
Explanation	To perform an unload or a load, an Object ID and an object type must be entered. No objects that meet the conditions were found.

NAT2697: Cipher-code is not allowed.

Text	Cipher-code is not allowed.
Explanation	The data should not be laoded into the database in ciphered form.
Action	Reset cipher-code or contact your DBA.

NAT2698: Field length in VSAM file different to field length user view.

Text

Field length in VSAM file different to field length user view.

Explanation

Generally no format overwrite is allowed when using VSAM files. However,
you may define an alphanumeric field in a user view  which is shorter
than the original field, but never a longer one. Numeric fields must
have the same attributes as the master field.

Action

Correct error.

NAT2699: Format defined in VSAM file is of a different type.

Text

Format defined in VSAM file is of a different type.

Explanation

When defining a VSAM user view the format of the field can"t be
changed, it has to be the same as the format of the field in the master
file.

Action

Do not change the format of a field in a user view of a VSAM file.