STACK

`STACK` [`TOP`]		`COMMAND` `operand1` [`operand2` [(`parameter`)]]
		[`DATA`] [`FORMATTED`] {`operand2` [(`parameter`)]}

This document covers the following topics:

Function
Syntax Description
Example

For explanations of the symbols used in the syntax diagram, see Syntax Symbols.

Related Statements: INPUT | RELEASE

Function

The STACK statement is used to place any of the following into the Natural stack:

the name of a Natural program or Natural system command to be executed;
data to be used during the execution of an INPUT statement.

For further information on the stack, see Further Programming Aspects, Stack Processing in the Programming Guide.

Syntax Description

Operand Definition Table:

Operand	Possible Structure					Possible Formats													Referencing Permitted	Dynamic Definition
`operand1`	C	S	A	G	N	A													yes	yes
`operand2`	C	S	A	G	N	A	U	N	P	I	F	B	D	T	L		G		yes	yes

Syntax Element Description:

Syntax Element	Description
`TOP`	TOP Option: If you specify `TOP`, the data/program/command will be placed at the top of the Natural stack. Otherwise, they are placed at the bottom of the stack. Example: The following statement causes the content of the variable `#FIELDA` to be placed as data on top of the stack: STACK TOP #FIELDA
`DATA`	DATA Option: This option, which is also the default, causes data to be placed in the stack which are to be used as input data for an `INPUT` statement. Delimiter characters or input assign characters contained within the data values will be processed as delimiters. For details on how data from the stack are processed by an `INPUT` statement, refer to Processing Data from the Natural Stack (in the description of the `INPUT` statement). Example: The following statements cause the contents of the variables `#FIELD1` and `#FIELD2` to be placed in the stack: MOVE 'ABC' TO #FIELD1 MOVE 'XYZ' TO #FIELD2 STACK #FIELD1 #FIELD2 These variables will be passed as data to the next `INPUT` statement in the Natural program, using delimiter mode: INPUT #FIELD1 #FIELD2 Note: If `operand2` is a time variable (Format T), only the time component of the variable content is placed in the stack, but not the date component.
`FORMATTED`	FORMATTED Option: This option causes all data to be passed on a field-by-field basis to the next `INPUT` statement; no key assignments or delimiter characters will be interpreted. Examples: The following statements cause `ABC,DEF` to be placed in `#FIELD1` and `XYZ` in `#FIELD2`: MOVE 'ABC,DEF' TO #FIELD1 MOVE 'XYZ' TO #FIELD2 STACK TOP DATA FORMATTED #FIELD1 #FIELD2 ... INPUT #FIELD1 #FIELD2 Assuming the input delimiter character to be the comma (profile/session parameter `ID=,`), the following statements - without the keyword `FORMATTED` - cause `ABC` to be placed in `#FIELD1` and `DEF` in `#FIELD2`: MOVE 'ABC,DEF' TO #FIELD1 STACK TOP DATA #FIELD1 ... INPUT #FIELD1 #FIELD2 Note: The `FORMATTED` option should be used if the data to be passed contains delimiter, control or DBCS characters to avoid unintentional interpretation of these characters.
`COMMAND operand1`	COMMAND Option: To place a command (or program name) in the stack, you specify the keyword `COMMAND` followed by the command specified in `operand1`. Natural will execute the command instead of displaying the `NEXT` prompt and prompting the user for input. Example: The following statement causes the command `RUN` to be placed at the top of the stack. Natural will execute this command at the point where the `NEXT` prompt would normally be issued. STACK TOP COMMAND 'RUN'
`COMMAND operand1 operand2 ...`	COMMAND with Data Option: Together with a command (`operand1`), you may also place data (`operand2`) in the stack. These data will then be processed by the next `INPUT` statement after the command has been executed. Data stacked with a command are always stacked unformatted. Note: If the data to be stacked include empty alphanumeric fields (that is, blanks), these blanks will be interpreted as delimiters between values and thus not processed correctly by the corresponding `INPUT` statement. Therefore, if you wish to stack empty alphanumeric fields as data with a command, you have to use two `STACK` statements: one `STACK DATA operand2 ...` to stack the data, and one `STACK COMMAND operand1` to stack the command.
`parameter`	Date Format: If `operand2` is a date variable, you can specify the session parameter `DF` as a parameter for this variable.

Example

** Example 'STKEX1': STACK                                              
************************************************************************
DEFINE DATA LOCAL                                                       
1 #CODE (A1)                                                            
END-DEFINE                                                              
*                                                                       
INPUT //                                                                
  10X 'PLEASE SELECT COMMAND' //                                        
  10X 'LIST VIEW      (V)' /                                            
  10X 'LIST PROGRAM * (P)' /                                            
  10X 'TECH INFO      (T)' /                                            
  10X 'STOP           (.)' //                                           
  20X 'CODE:' #CODE                                                     
*                                                                       
*                                                                       
DECIDE ON FIRST #CODE                                                   
  VALUE 'V'                                                                
    STACK TOP DATA    'VIEW'                                            
    STACK TOP COMMAND 'LIST'                                   
  VALUE 'P'                               
    STACK TOP COMMAND 'LIST PROGRAM *'
  VALUE 'T'                             
    STACK TOP COMMAND 'LAST *'        
    STACK TOP COMMAND 'TECH'          
    STACK TOP COMMAND 'SYSPROD'   
  VALUE '.'                           
    STOP                              
  NONE                                
    REINPUT 'PLEASE ENTER VALID CODE' 
END-DECIDE                            
*                                     
*                                     
END

Output of Program STKEX1:

PLEASE SELECT COMMAND
                     
LIST VIEW      (V)   
LIST PROGRAM * (P)   
TECH INFO      (T)   
STOP           (.)   
                     
          CODE:P

After entering and confirming code:

16:46:28               ***** NATURAL LIST COMMAND *****              2005-01-19
User HTR                 - LIST Objects in a Library -         Library SYSEXSYN
                                                                               
Cmd  Name       Type         S/C  SM Version  User ID    Date        Time      
---  *________  P__________  *__  *  *______  *________  *__________ *________ 
__   ACREX1     Program      S/C  S  4.1.03   RKE        2004-11-11  16:32:37  
__   ACREX2     Program      S/C  S  4.1.03   RKE        2005-01-05  10:29:51  
__   ADDEX1     Program      S/C  S  4.1.03   RKE        2004-11-11  16:36:49  
__   AEDEX1R    Program      S/C  R  4.1.03   RKE        2004-11-11  16:40:34  
__   AEDEX1S    Program      S/C  S  4.1.03   RKE        2004-11-11  16:39:57  
__   AEPEX1R    Program      S/C  R  4.1.03   RKE        2004-11-11  16:41:57  
__   AEPEX1S    Program      S/C  S  4.1.03   RKE        2004-11-11  16:42:31  
__   AEPEX2     Program      S/C  S  4.1.03   RKE        2004-11-11  16:43:37  
__   ASDEX1R    Program      S/C  R  4.1.03   RKE        2004-11-11  17:00:21  
__   ASDEX1S    Program      S/C  S  4.1.03   RKE        2004-11-11  17:00:50  
__   ASGEX1R    Program      S/C  R  4.1.03   RKE        2004-11-11  17:02:01  
__   ASGEX1S    Program      S/C  S  4.1.03   RKE        2004-11-11  17:02:08  
__   ATBEX1R    Program      S/C  R  4.1.03   RKE        2004-11-11  17:03:18  
__   ATBEX1S    Program      S/C  S  4.1.03   RKE        2004-11-11  17:03:05  
                                                              14 Objects found 
Top of List.                                                                   
Command ===>                                                                   
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
      Help  Print Exit  Sort        --    -     +     ++          >     Canc