You will now write a short program which reads specific data from a database file and displays the corresponding output.

When you have completed the exercises below, your sample application will consist of just one module (the data fields that are used by the program are defined within the program):

This document contains the following exercises:

• Saving Your Program Under a New Name

• Defining the Required Data Using a View

• Reading Data from a Database

• Reading Selected Data from a Database

---

Saving Your Program Under a New Name

You will now create a new program which will be used in the remainder of this tutorial. It will be created by saving your Hello World program under a new name.

To save the program under a new name

1. In the program editor's command line, enter one of the following:

   SAVE PGM01

   SA PGM01

   The current program is saved with the new name PGM01. The program named HELLO is still shown in the program editor.

2. Read the newly created program into the program editor by entering the following in the program editor's command line:

   READ PGM01

   The program name which is displayed in the program editor changes to PGM01.

3. Delete all code in the program editor. To do so, enter the following line command at the beginning of each line to be deleted and press ENTER:

   .D

   Example:

   > > + Program PGM01 Lib TUTORIAL All ....+....1....+....2....+....3....+....4....+....5....+....6....+....7.. 0010 .DThe "Hello world!" example in Natural. 0020 .D 0030 .DSPLAY "Hello world!" 0040 .DD /* End of program 0050

   Or:
   Enter the following line command at the beginning of the first line and press ENTER:

   .D(4)

   where the number in parentheses indicates the number of lines to be deleted.

Defining the Required Data Using a View

The database file and the fields that are to be used by your program have to be specified between DEFINE DATA and END-DEFINE at the top of the program.

For Natural to be able to access a database file, a logical definition of the physical database file is required. Such a logical file definition is called a data definition module (DDM). The DDM contains information about the individual fields of the file. DDMs are usually defined by the Natural administrator.

To be able to use the database fields in a Natural program, you must specify the fields from the DDM in a view. For this tutorial, we will use the DDM for the EMPLOYEES database file.

To specify the DEFINE DATA block

• Enter the following code in the program editor:

  DEFINE DATA
  LOCAL
  
  END-DEFINE
  *
  END

  LOCAL means that the variables that you will define with the next step are local variables which apply only to this program.

To display the data fields from the DDM in a split screen

1. In the program editor's command line, enter the following:

   SPLIT VIEW EMPLOYEES SHORT

   SHORT indicates that the data fields are to be listed in short form (that is, only the Adabas short names and corresponding Natural field names are displayed).

   The screen is divided into two sections. The data fields from the DDM displayed in the lower half of the screen. It is not possible to edit the data in the lower half of the screen.

   > > + Program PGM01 Lib TUTORIAL All ....+....1....+....2....+....3....+....4....+....5....+....6....+....7.. 0010 DEFINE DATA 0020 LOCAL 0040 END-DEFINE 0050 * 0060 END 0070 0080 0090 0100 0110 ....+....1....+....2....+....3....+....4....+....5....+... S 5 L 1 Split Top View EMPLOYEES DBID 0 FNR 1 Def seq 1 AA PERSONNEL-ID A 8 D CNNNNNNN G 1 AB FULL-NAME NAME INFORMATION 2 AC FIRST-NAME A 20 N FIRST/CHRISTIAN NA 2 AD MIDDLE-I A 1 N MIDDLE INITIAL 2 AE NAME A 20 D SURNAME/FAMILY NAM 1 AD MIDDLE-NAME A 20 N SECOND/MIDDLE NAME 1 AF MAR-STAT A 1 F M=MARRIED 1 AG SEX A 1 F 1 AH BIRTH D 6 N D BIRTH-DATE (YYYY-M

2. You can now page through the view to see which data fields are used and how they have been defined. To do so, use the following commands:

   Command	Description
   SPLIT + or S +	Page forward in the view.
   SPLIT - or S -	Page backward in the view.
   SPLIT . or S .	Terminate split-screen mode.

   The next step assumes that split-screen mode has been terminated.

3. Place the cursor in the first position of the line containing LOCAL and enter the following:

   .I

   In full-screen mode, 9 blank lines are inserted. Only 4 blank lines would have been inserted in split-screen mode.

4. Enter the following code below LOCAL:

   1 EMPLOYEES-VIEW VIEW OF EMPLOYEES
     2 FULL-NAME
       3 NAME (A20)
     2 DEPT (A6)
     2 LEAVE-DATA
       3 LEAVE-DUE (N2)

5. Press ENTER.

   The remaining blank lines are eliminated.

   Note:
   The remaining blank lines are not eliminated, when the default setting in the editor profile has been changed, that is: when the option Empty Line Suppression has been set to "N".

The first line contains the name of your view and the name of the database file from which the fields have been taken. This is always defined on level 1. The level is indicated at the beginning of the line. The names of the database fields from the DDM are defined at levels 2 and 3.

Levels are used in conjunction with field grouping. Fields assigned a level number of 2 or greater are considered to be a part of the immediately preceding group which has been assigned a lower level number. The definition of a group enables reference to a series of fields (this may also be only one field) by using the group name. This is a convenient and efficient method of referencing a series of consecutive fields.

Format and length of each field is indicated in parentheses. "A" stands for alphanumeric, and "N" stands for numeric.

Reading Data from a Database

Now that you have defined the required data, you will add a READ loop. This reads the data from the database file using the defined view. With each loop, one employee is read from the database file. Name, department and remaining days of vacation for this employee are displayed. Data are read until all employees have been displayed.

To read data from a database

1. Insert the following below END-DEFINE (use the .I command as described above to insert blank lines):

   READ EMPLOYEES-VIEW BY NAME
   *
     DISPLAY NAME 3X DEPT 3X LEAVE-DUE
   *
   END-READ

   BY NAME indicates that the data which is read from the database is to be sorted alphabetically by name.

   The DISPLAY statement arranges the output in column format. A column is created for each specified field and a header is placed over the column. 3X means that 3 spaces are to be inserted between the columns.

2. Run the program.

   The following output appears.

   MORE                                                                           
   Page      1                                                  09-06-30  16:06:49
                                                                                  
           NAME           DEPARTMENT   LEAVE                                      
                             CODE       DUE                                       
   --------------------   ----------   -----                                      
                                                                                  
   ABELLAN                PROD04        20                                        
   ACHIESON               COMP02        25                                        
   ADAM                   VENT59        19                                        
   ADKINSON               TECH10        38                                        
   ADKINSON               TECH10        18                                        
   ADKINSON               TECH05        17                                        
   ADKINSON               MGMT10        28                                        
   ADKINSON               TECH10        26                                        
   ADKINSON               SALE30        36                                        
   ADKINSON               SALE20        37                                        
   ADKINSON               SALE20        30                                        
   AECKERLE               SALE47        31                                        
   AFANASSIEV             MGMT30        26                                        
   AFANASSIEV             TECH10        35                                        
   AHL                    MARK09        30                                        
   AKROYD                 COMP03        20                                        
   ALEMAN                 FINA03        20                                        
   

   As a result of the DISPLAY statement, the column headers (which are taken from the DDM) are underlined and one blank line is inserted between the underlining and the data. Each column has the same width as defined in the DEFINE DATA block (that is: as defined in the view).

   The title at the top of each page, which contains the page number, date and time, is also caused by the DISPLAY statement.

3. Press ENTER repeatedly to display all pages.

   You will return to the program editor when all employees have been displayed.

   Tip:
   If you want to return to the program editor before all employees have been displayed, enter EDIT or its abbreviation E at the MORE prompt. It is also possible to enter the terminal command %., which interrupts the current Natural operation, at the MORE prompt. By default, each terminal command starts with the control character %. Your administrator, however, may have defined another control character.

Reading Selected Data from a Database

Since the previous output was very long, you will now restrict it. Only the data for a range of names is to be displayed, starting with "Adkinson" and ending with "Bennett". These names are defined in the demo database.

To restrict the output to a range of data

1. Before you can use new variables, you have to define them. Therefore, insert the following below LOCAL:

   1 #NAME-START        (A20) INIT <"ADKINSON">
   1 #NAME-END          (A20) INIT <"BENNETT">

   These are user-defined variables; they are not defined in demo database. The hash (#) at the beginning of the name is used to distinguish the user-defined variables from the fields defined in the demo database; however, it is not a required character.

   INIT defines the default value for the field. The default value must be specified in pointed brackets and quotation marks.

2. Insert the following below the READ statement:

   STARTING FROM #NAME-START
   ENDING AT #NAME-END

   Your program should now look as follows:

   DEFINE DATA
   LOCAL
     1 #NAME-START        (A20) INIT <"ADKINSON">
     1 #NAME-END          (A20) INIT <"BENNETT">
     1 EMPLOYEES-VIEW VIEW OF EMPLOYEES
       2 FULL-NAME
         3 NAME (A20)
       2 DEPT (A6)
       2 LEAVE-DATA
         3 LEAVE-DUE (N2)
   END-DEFINE
   *
   READ EMPLOYEES-VIEW BY NAME
     STARTING FROM #NAME-START
     ENDING AT #NAME-END
   *
     DISPLAY NAME 3X DEPT 3X LEAVE-DUE
   *
   END-READ
   *
   END

   Your program code now exceeds one screen page. To navigate in the program source, you can use the following commands or keys:

   Command	Description
   BOT	Go to the end of the program.
   TOP	Return to the beginning of the program.
   Key	Description
   PF8 or ENTER	Scroll down one page in the program.
   PF7	Scroll up one page in the program.

3. Run the program.

   The output is shown. When you press ENTER repeatedly, you will notice that you will return to the program editor after a couple of pages (that is: when the data for the last employee named Bennett has been displayed).

4. Stow the program.

You can now proceed with the next exercises: User Input.