This section covers the following topics:
The Technical Information function displays Natural Monitor environmental information and history session information.
This function is useful for determining the following:
Environmental Information
the environment in which Natural Monitor is executing;
the version maintenance levels of the Natural Monitor code; and
various parameters and statistical information.
History Session Control
shows details about the Natural Monitor history session definitions and history session status; and
allows starting and stopping the history session.
You can access the Natural Monitor Technical Information function in one of two ways:
from any screen outside the Natural Monitor System, type the
code NM TE on the command line and press ENTER; or
from any screen within the Natural Monitor System, type
TE on the command line and press
ENTER.
16:05:44 ***** REVIEW NM UTILITY ***** 2006-03-02
- Technical Information -
Code Description
EI Environmental Information
HC History Session Control
Command ===>
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
Help Exit Menu
|
The functions available from this menu are described in the following table:
| Code | Function | Description |
|---|---|---|
EI |
Environmental Information |
Gives an overview of the environment. |
HC |
History Session Control |
Shows details about the history session and allows starting and stopping the history session. |
To access the Environmental Information screen
Type EI on the command line and press
ENTER.
The Environmental Information screen appears as shown below:
16:06:46 ***** REVIEW NM UTILITY ***** 2006-03-02
- Environmental Information -
TP System .............. CICS/MVS 2.1.0 Reports Currently Active 2
Natural Code Version ..... SYSRNM 3.6.1 Max. Active Reports ...... 2
Driver Version ......... NATGWREV 3.6.1 Report Start Requests .... 2
Assembly Date .............. 2000/08/11
Assembly Time ................ 13:51:00 Session Logons ........... 1
Session Logoffs .......... 0
Number of RUABs Allocated .... 1 Sessions Logged On ....... 1
Number of Entries per NCT .... 32 Max. Sessions Logged On .. 1
System Start Date .......... 2000/09/01
System Start Time ............ 09:48:21 Total Transactions ....... 62
Average Response Time .... 0.149
Shared Storage Allocated ..... 7712
Max. Shared Storage Alloc. ... 7712 Total Database Calls ..... 4697
Average Database Time .... 0.001
Average Adabas Cmd Time .. 0.00012
Command ===>
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
Help Exit HC Canc
|
The following commands are available:
| Command | PF Key | Description |
|---|---|---|
HC |
PF8 | Go to History Session Control. |
RESET |
Reset all transaction and database statistic field values to zero and release all unused RUAB storage. |
The following fields are displayed for this function:
| Field | Description |
|---|---|
TP System |
CICS version under which the Natural Monitor is executing. |
Natural Code Version |
The version of the Natural code of Natural Monitor in library
SYSRNM.
|
Driver Version |
The version of the linked nucleus module of Natural Monitor. |
Assembly Date |
Assembly date of the Natural Monitor system control block
RNMSCB.
|
Assembly Time |
Assembly time of the Natural Monitor system control block
RNMSCB.
|
Number of RUABs Allocated |
The number of Natural Monitor user account blocks
(RUABs) allocated in CICS shared storage. One RUAB is
used to monitor one Natural session. It can be reused after session
termination.
|
Number of Entries per NCT |
Number of entries in the Natural Call Table
(NCT) of Natural Monitor. The NCT is part of each RUAB. It is used
to monitor the usage of the Natural objects executed during one
session.
|
System Start Date |
The date when the first Natural session was monitored by Natural Monitor. |
System Start Time |
The time when the first Natural session was monitored by Natural Monitor. |
Shared Storage Allocated |
The total amount of CICS shared storage in bytes acquired by Natural Monitor. |
Max. Shared Storage Alloc. |
The highest amount of CICS shared storage in bytes acquired by Natural Monitor since system startup. |
Reports Curr. Active |
The number of reports that are currently active. |
Report Start Requests |
The total number of report start requests since system startup. |
Session Logons |
The total number of Natural sessions which were monitored by Natural Monitor since system startup. |
Session Logoffs |
The total number of Natural sessions terminated which were monitored by Natural Monitor. |
Session Logged On |
The number of Natural sessions currently monitored by Natural Monitor. |
Max. Sessions Logged On |
The maximum number of Natural sessions concurrently monitored by Natural Monitor. |
Total Transactions |
The total number of Natural transactions monitored by Natural Monitor. A transaction lasts from screen input time until next screen output. |
Average Response Time |
The average response time in seconds for all transactions monitored by Natural Monitor. |
Total Database Calls |
The total number of database calls for all sessions monitored by Natural Monitor. |
Average Database Time |
The average database call response time for all sessions monitored by Natural Monitor. |
Average Adabas Command Time |
The average Adabas call command time for all sessions monitored by Natural Monitor. The command time value is passed back by Adabas with every Adabas call. |
To access the History Session Control screen:
Type HC on the command line and press
ENTER.
The History Session Control screen appears as shown below:
15:00:41 ***** REVIEW NM UTILITY ***** 2010-06-10
- History Session Control -
Transaction Id ................... QA42 Start Date .............. 2010/06/09
Current Status ........... terminated Start Time ................ 21:40:31
Natural User Id .............. REVHIST End Date ................ 2010/06/09
Database Id of Repository File .. 19999 End Time .................. 21:40:34
Database Fnr of Repository File .. 1601
Date Format in Repository File .... OLD
Logging of empty reports .......... NO
Dynamic Profile Parameters
PRINTER=OFF,WORK=OFF,PROFILE=RNMQA
AUTO=ON PC=OFF ETID=' ' PROGRAM=RNMHIST3 PSEUDO=OFF TTYPE=PRNT
SENDER=CONSOLE ASYNNAME=REVHIST STACK=(LOGON SYSRNM;P-NMHIST)
Command ===>
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
Help Exit EI Canc
|
The following commands are available:
| Command | PF Key | Description |
|---|---|---|
EI |
PF7 | Go to Environmental Information. |
START |
Start the Natural Monitor history session. | |
STOP |
Terminate the Natural Monitor history session. |
The following fields are displayed for this function:
| Field | Description | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Transaction Id |
The CICS transaction under which the Natural Monitor history session is running. | ||||||||||||||
Current Status |
|
||||||||||||||
Natural User Id |
The Natural user ID (*USER) of the
Natural Monitor history session.
|
||||||||||||||
Database Id of Repository File |
The database ID number of the Natural Review repository file. | ||||||||||||||
Database Fnr of Repository File |
The database file number of the Natural Review repository file. | ||||||||||||||
Date Format in Repository File |
|
||||||||||||||
Logging of empty reports |
Indicates whether empty reports are written to the repository
file.
Possible values are: |
||||||||||||||
Start Date |
The start date of the Natural Monitor history session. | ||||||||||||||
Start Time |
The start time of the Natural Monitor history session. | ||||||||||||||
End Date |
The termination date of the Natural Monitor history session. | ||||||||||||||
End Time |
The termination time of the Natural Monitor history session. | ||||||||||||||
Dynamic Profile Parameters |
The dynamic profile parameters for the start of the Natural Monitor history session. | ||||||||||||||