Natural System Error Messages 3151-3200

NAT3151: A command queue overflow occurred. DB/FNR :1:/:2:.

Text
A command queue overflow occurred. DB/FNR .../....
Explanation
The database administrator may increase the value for the NC parameter,
and/or the command may be issued when a lower level of command activity
is in effect.
Action
Contact your database administrator.

NAT3152: Internal user buffer too small. DB/FNR :1:/:2:.

Text
Internal user buffer too small. DB/FNR .../....
Explanation
The internal user buffer was not large enough to contain the user
buffer areas. The database administrator should increase the value
of the LU parameter.
Action
Contact your database administrator.

NAT3153: Previous Adabas call still in process. DB/FNR :1:/:2:.

Text
Previous Adabas call still in process. DB/FNR .../....
Explanation
A 'CALL Adabas' was issued by a user while a previous call for
the user was still being processed.
Action
Contact your database administrator.

NAT3154: Adabas call has been cancelled. DB/FNR :1:/:2:.

Text
Adabas call has been cancelled by the user. DB/FNR .../....
Action
No action required.

NAT3160: Too many ASSO/DATA blocks active in buffer pool. DB/FNR :1:/:2:.

Text
Too many ASSO/DATA blocks active in buffer pool. DB/FNR .../....
Explanation
Too many Associator and Data Storage blocks were marked as
active in the Adabas buffer pool for a single command.
Action
Contact your database administrator.

NAT3161: Invalid RABN chain in header list. DB/FNR :1:/:2:.

Text
Invalid RABN chain in header list. DB/FNR .../....
Explanation
The RABN chain in the header list of the Adabas buffer pool was
invalid.
Action
Contact your database administrator.

NAT3162: No space for Adabas buffer pool header blocks. DB/FNR :1:/:2:.

Text
No space for Adabas buffer pool header blocks. DB/FNR .../....
Explanation
No additional space was available for Adabas buffer pool header
blocks.
Action
Contact your database administrator.

NAT3163: RABN was already in chain. DB/FNR :1:/:2:.

Text
RABN was already in chain. DB/FNR .../....
Explanation
The RABN to be linked into the RABN header chain was already in
the chain.
Action
Contact your database administrator.

NAT3164: Too many work areas allocated for command. DB/FNR :1:/:2:.

Text
Too many work areas allocated for command. DB/FNR .../....
Action
Contact your database administrator.

NAT3165: Descriptor invalid or non-existent. DB/FNR :1:/:2:.

Text
Descriptor invalid or non-existent. DB/FNR .../....
Explanation
A descriptor name was either invalid or did not exist in the
Descriptor Value Table.
Action
Check program and correct error, or contact your database administrator.

NAT3166: Error detected in inverted list index. DB/FNR :1:/:2:.

Text
Error detected in inverted list index. DB/FNR .../....
Explanation
An error was detected in an inverted list index; a descriptor
value was not found during a delete operation.
o  Locate the descriptor that caused the error in the
   additions 2 field of the user control block.
o  Run the VERIFY option of ADAINV for this descriptor and save
   the output.
o  Reinvert the descriptor.
o  If necessary, restart the database (if this is possible).
o  Send the  following  information  to  your  nearest  support
   centre:
   -  the output of the VERIFY option of ADAINV;
   -  all available PLOGs;
   -  the FDT of the file containing the error;
   -  if the nucleus crashed, the crash directory.
Action
See explanation.

NAT3167: Error detected in inverted list index. DB/FNR :1:/:2:.

Text
Error detected in inverted list index. DB/FNR .../....
Explanation
An error was detected in an inverted list index; a descriptor
value was already present during an insert operation.
o  Locate the descriptor that caused the error in the
   additions 2 field of the user control block.
o  Run the VERIFY option of ADAINV for this descriptor and save
   the output.
o  Reinvert the descriptor.
o  If necessary, restart the database (if this is possible).
o  Send the following information to your nearest support
   centre:
   -  the output of the VERIFY option of ADAINV;
   -  all available PLOGs;
   -  the FDT of the file containing the error;
   -  if the nucleus crashed, the crash directory.
Action
See explanation.

NAT3168: Internal CID for coupling processing not found. DB/FNR :1:/:2:.

Text
Internal CID for coupling processing not found. DB/FNR .../....
Explanation
An internal 'CID' required during coupling processing was not found.
Action
Contact your database administrator.

NAT3170: Adabas RABN for the command not found. DB/FNR :1:/:2:.

Text
Adabas RABN for the command not found. DB/FNR .../....
Explanation
The Adabas RABN required for the command could not be found.
Action
Contact your database administrator.

NAT3171: Constant set used by Adabas not found. DB/FNR :1:/:2:.

Text
Constant set used by Adabas not found. DB/FNR .../....
Action
Contact your database administrator.

NAT3172: ISN less than MINISN or greater than MAXISN. DB/FNR :1:/:2:.

Text
ISN less than MINISN or greater than MAXISN. DB/FNR .../....
Explanation
An ISN was either less than the MINISN setting or greater than the
MAXISN setting in effect for the file.
Action
Check program and correct error, or contact your database administrator.

NAT3173: An invalid data storage RABN was detected. DB/FNR :1:/:2:.

Text
An invalid data storage RABN was detected. DB/FNR .../....
Action
Contact your database administrator.

NAT3174: Starting RABN for L2/L5 not in address converter. DB/FNR :1:/:2:.

Text
Starting RABN for L2/L5 not in address converter. DB/FNR .../....
Explanation
The starting data storage RABN for an L2/L5 command was not
contained in the address converter for the file.
Action
Check program and correct error, or contact your database administrator.

NAT3176: Error in call to Adabas subroutine/inverted list. DB/FNR :1:/:2:.

Text
Error in call to Adabas subroutine/inverted list. DB/FNR .../....
Explanation
An incorrect call to an Adabas subroutine or an inconsistency in
an inverted list was detected.
Action
Check program and correct error, or contact your database administrator.

NAT3177: Record not found in indicated DATA storage block. DB/FNR :1:/:2:.

Text
Record not found in indicated DATA Storage block. DB/FNR .../....
Explanation
A record could not be found in the Data Storage block which should
have contained it as indicated by the Address Converter.
Action
Contact your database administrator.

NAT3178: FDT and internal format buffer not consistent. DB/FNR :1:/:2:.

Text
FDT and internal format buffer not consistent. DB/FNR .../....
Explanation
An inconsistency was detected between the Field Description Table (FDT)
and the internal format buffer;
or an internal occurred when updating a multiple-value field.
Action
Contact your database administrator.

NAT3181: Start of transaction not found on autobackout. DB/FNR :1:/:2:.

Text
Start of transaction not found on autobackout. DB/FNR .../....
Explanation
The start of a transaction could not be found when an
'autobackout' was executed.
Action
Check program and correct error, or contact your database administrator.

NAT3182: Necessary ET data not found in WORK block. DB/FNR :1:/:2:.

Text
Necessary ET data not found in WORK block. DB/FNR .../....
Explanation
The necessary ET data were not found in the appropriate WORK block.
Action
Correct error or contact your database administrator.

NAT3183: Internal no. for database I/O operation invalid. DB/FNR :1:/:2:

Text
Internal no. for database I/O operation invalid. DB/FNR .../...
Explanation
An internally assigned number for a database I/O operation was
found to be invalid.
Action
Contact your database administrator.

NAT3184: A phonetic field name could not be found. DB/FNR :1:/:2:.

Text
A phonetic field name could not be found. DB/FNR .../....
Action
Check program and correct error, or contact your database administrator.

NAT3185: ADAM field not found in compressed record. DB/FNR :1:/:2:.

Text
ADAM field not found in compressed record. DB/FNR .../....
Action
Contact your database administrator.

NAT3196: Referential integrity violated (DB/FNR/sub/con :1:/:2:/:3:/:4:).

Text
Referential integrity violated (DB/FNR/sub/con .../.../.../...).
Explanation
The command has been rejected by Adabas.
Referential integrity has been violated. The error message shows
the database ID, file number, subcode and constraint name of the
violated constraint.
Action
Handle the referential integrity violation;
for example, by issuing an appropriate error message.

NAT3197: Pool for unique descriptor values too small. DB/FNR :1:/:2:.

Text
Pool for unique descriptor values too small. DB/FNR .../....
Action
Contact your database administrator.

NAT3198: Value for unique descriptor already exists. DB/FNR :1:/:2:.

Text
Value for unique descriptor already exists. DB/FNR .../....
Explanation
An attempt was made to duplicate a value for a unique descriptor.
Action
Check program and correct error, or contact your database administrator.

NAT3199: Inconsistency in inverted list index. DB/FNR :1:/:2:.

Text
Inconsistency in inverted list index. DB/FNR .../....
Explanation
During an UPDATE opertion, an inconsistency was detected in an
inverted list index.
Action
Contact your database administrator.

NAT3200: Security violation or invalid cipher code. DB/FNR :1:/:2:.

Text
Security violation or invalid cipher code. DB/FNR .../....
Action
Check program and correct error, or contact your database administrator.