Natural System Error Messages 1551-1600

NAT1551: Error on NATSPOOL file.

Text
Error on NATSPOOL file.
Explanation
A response code different from 0 was returned when accessing
the NATSPOOL file.
Action
Check status of the NATSPOOL file and correct error.

NAT1552: NATSPOOL: Record not found for a report being printed.

Text
NATSPOOL: Record not found for a report being printed.
Explanation
To store a report on the NATSPOOL file, NATSPOOL tries to read the
current DETAIL record (for update). This request failed because
the record could not be found.
Action
Re-run the Natural program which generates the report.

NAT1553: NATSPOOL: Invalid output length in WRITE (rep) statement.

Text
NATSPOOL: Invalid output length in WRITE (rep) statement.
Explanation
The NATSPOOL nucleus receives lines of output from the Natural
nucleus. The length of one of these lines is not positive.
Action
Contact Software AG support.

NAT1554: NATSPOOL: No message group record found for a queue.

Text
NATSPOOL: No message group record found for a group.
Explanation
To store a queue on the NATSPOOL file, NATSPOOL reads a free group,
updates the DETAIL record and then tries to read the previous
group record (for update). This request failed because the record
could not be found.
Action
Re-run the Natural program which generates the queue.

NAT1555: :1: occurred during work- or print file access.

Text
DMS error DXXX occurred during work- or print file access.
Action
Check file command settings for work- or print file.

NAT1556: NATSPOOL file is full.

Text
NATSPOOL file is full.
Explanation
The NATSPOOL file, which is used as the physical spool file for all
reports produced by Natural programs, is full. The maximum
number of reports that may be contained in the NATSPOOL file,
is defined via the formatting function of the Spool File Maintenance.
Action
(1) Print some reports with disposition D; or
(2) Delete some reports; or
(3) Increase the spool file (see Spool File Maintenance).

NAT1557: NATSPOOL: Job number record not found on checkpoint.

Text
NATSPOOL: Job number record not found on checkpoint.
Explanation
The NATSPOOL environment (user profiles, logical printer profiles)
has been correctly defined, but the part of the file which is to
contain the printout queues has not been pre-formatted.
Action
Format the NATSPOOL file,
using the F-function of the NATSPOOL operator commands.

NAT1558: NATSPOOL: Interval control error.

Text
NATSPOOL: Interval control error.
Explanation
The NATSPOOL printer task could not be started because an
invalid type of request was received for processing by the
CICS interval control program.
Action
Contact your system programmer.

NAT1559: NATSPOOL: GETMAIN for work area failed.

Text
NATSPOOL: GETMAIN for work area failed.
Explanation
This error may be caused by one of the following:
1) During initialisation, the Natural Advanced Facilities work area
   (2 KB) could not be allocated.
2) During execution, the size of this work area was not sufficient.
Action
1) Increase the thread size.
2) Contact Software AG support.

NAT1560: NATSPOOL: Index record not found for a queue.

Text
NATSPOOL: Index record not found for a queue.
Explanation
This error is caused by an internal error within the
NATSPOOL nucleus.
Action
Contact your Natural adminstrator; if necessary,
contact Software AG support.

NAT1561: NATSPOOL: Invalid form or destination.

Text
NATSPOOL: Invalid form or destination.
Explanation
An internal error has occurred in the NATSPOOL nucleus.
Action
Contact your Natural administrator; if necessary,
contact Software AG support.

NAT1562: NATSPOOL: Index record not found during close processing.

Text
NATSPOOL: Index record not found during close processing.
Explanation
To close a report on the NATSPOOL file, the index record is
updated with 'number of pages' and status 'to be printed'.
This request failed because the index record could not be
found.
Action
Re-run the Natural program which creates the report.

NAT1563: NATSPOOL: EXEC CICS START, invalid SYSID.

Text
NATSPOOL: EXEC CICS START, invalid SYSID.
Explanation
The SYSID of the printer associated with the NATSPOOL
printer task could not be found.
Action
Contact your Natural administrator.

NAT1564: NATSPOOL: EXEC CICS START, invalid transaction ID.

Text
NATSPOOL: EXEC CICS START, invalid transaction ID.
Explanation
The transaction ID of the NATSPOOL printer task could not be found
in the CICS Program Control Table.
Action
Contact your Natural administrator.

NAT1565: NATSPOOL: EXEC CICS START, invalid printer ID.

Text
NATSPOOL: EXEC CICS START, invalid printer ID.
Explanation
The terminal ID of the printer associated with the NATSPOOL
printer task could not be found in the CICS Terminal Control Table.
Possible reasons are:
- a misspelt printer name in the NATSPOOL Allocation Table; or
- the terminal ID of the printer is not contained in the CICS TCT.
Action
Check NATSPOOL Allocation Table or contact your Natural administrator.

NAT1566: NATSPOOL: Printer not defined in CICS, or LOCATE failed.

Text
NATSPOOL: Printer not defined in CICS, or LOCATE failed.
Explanation
When scanning the CICS Terminal Control Table (DFHTC CTYPE=LOCATE),
the terminal ID specified in TCATPTA could not be located.
Action
Contact your Natural administrator.

NAT1567: NATSPOOL: CICS locate failed.

Text
NATSPOOL: CICS locate failed.
Explanation
When scanning the CICS Terminal Control Table (DFHTC CTYPE=LOCATE),
an error occurred.
Action
Contact your Natural administrator.
See program NATAF in the Natural ADVANCED FACILITIES source library.

NAT1568: NATSPOOL: Open printer for hardcopy output failed.

Text
NATSPOOL: Open printer for hardcopy output failed.
Explanation
The hardcopy system was invoked with the request 'OPEN PRINTER
FOR OUTPUT', but the OPEN failed.
Action
Contact your Natural administrator.

NAT1569: Duplicate index record on NATSPOOL file.

Text
Duplicate index record on NATSPOOL file.
Explanation
To close a queue on the NATSPOOL file, NATSPOOL updates the index
record with 'number of pages' and status 'to be printed'.
This request failed because more than one index record with the
same key was found.
Action
Re-run the Natural program which generates the print queue.

NAT1570: NATSPOOL: CSECT 'NOMPUT' is missing.

Text
NATSPOOL: CSECT 'NOMPUT' is missing.
Explanation
The CSECT 'NOMPUT', which is used when routing reports from NAF
to NOM is either missing in the link-edit stream or the name of
the CSECT 'NOMPUT' has been changed.
Action
Check for the presence of NOMPUT in the link-edit stream.

NAT1571: NATSPOOL: NOM has not been installed.

Text
NATSPOOL: NOM has not been installed.
Explanation
A NAF report has been created for NOM (Entire Output Management),
but NOM has not been installed.
Action
Install NOM.

NAT1572: Logical printer profile :1: not found on spool file.

Text
Logical printer profile ... not found on spool file.
Explanation
When using RSO direct support for printing, NAF reads
the corresponding LPF from the spool file.
During CLOSE processing, this LPF could not be read,
either because it did not exist or because an
Adabas error occurred.
Action
Check why the LPF could not be read.

NAT1573: Logical printer profile :1: not found on spool file.

Text
Logical printer profile ... not found on spool file.
Explanation
(1) The logical printer referred to in the user's Natural program,
    has not been associated with the user profile.
(2) The Natural session was not started with a correct PRINTER
    parameter for NATSPOOL, i.e. PRINTER=(NATSPOOL,...).
(3) The OUTPUT operand of a DEFINE PRINTER statement references
    a logical printer profile which does not exist on the spool file.
Action
(1) Define a logical printer profile for the user,
    using the U function of the NATSPOOL operator command.
(2) Define a correct PRINTER parameter for NATSPOOL.

NAT1574: NATSPOOL: No physical printer allocated to hardcopy.

Text
NATSPOOL: No physical printer allocated to hardcopy.
Explanation
A hardcopy was requested (%H), but no physical printer is allocated.
When hardcopies are requested, an allocation between the logical
printer
  DESTINATION: TERMID of the user's terminal
  FORM:        A
and at least one physical printer must be defined.
The allocated printer(s) must be added to the NATSPOOL file.
Action
Define an allocation between logical and physical printer,
by using the hardcopy allocation function of SYSPOOL.

NAT1575: NATSPOOL: Invalid function code in hardcopy write.

Text
NATSPOOL: Invalid function code in hardcopy write.
Explanation
The hardcopy system was invoked with a request different
from OPEN, PUT, or CLOSE.
Action
Contact your Natural administrator.

NAT1576: NATSPOOL: Hardcopy system not available.

Text
NATSPOOL: Hardcopy system not available.
Explanation
A hardcopy was requested (%H), but NATSPOOL did not provide
support for hardcopy due to one of the following reasons:
(1) The module NATSPOOL is not included in the link-edit of Natural.
(2) During initialization of Natural, the GETMAIN for the
    hardcopy system has failed.
Action
(1) Include NATSPOOL in the link-edit of Natural.
(2) Ensure that sufficient storage is available.

NAT1577: NATSPOOL: CSECT 'NAFPARM' is missing.

Text
NATSPOOL: CSECT 'NAFPARM' is missing.
Explanation
This error may be caused by one of the following:
- The Natural Advanced Facilities parameter module NAFPARMC/NAFPARMI
  is missing in the link-edit stream.
- The CSECT instruction is missing in the source of the parameter
  module.
- The name in the CSECT instruction has been changed; the name must be
  'NAFPARM'.
Action
Check for the presence of the parameter module in the link-edit stream;
check if the source of the parameter module is correct/complete.

NAT1578: No logical printer profile for hardcopy found.

Text
No logical printer profile for hardcopy found.
Explanation
When the user issues %H, NAF needs a logical printer profile (LPF).
The name of this LPF is built from CMTERMID or USRID, depending on
NAF customization. This LPF was not found during session
initialization - probably it has been deleted from the spool file.
Action
Provide such an LPF or issue %Hxyz where xyz is the name
of an existing LPF.

NAT1581: NATSPOOL: CSECT :1: is missing.

Text
NATSPOOL: CSECT :1: is missing.
Explanation
The CSECT specified in this error message is missing
in the link-edit stream.
Action
If NAFIO is missing, check for the presence of module NAFAF.
If NAFBS2FC is missing, check for the presence of module NAFSERVR.

NAT1582: NATSPOOL: Job number record not found during 'close'.

Text
NATSPOOL: Job number record not found during 'close'.
Explanation
When closing a report, NATSPOOL has to update the job number
record. However, this record was not found.
Action
Contact Software AG support.

NAT1583: Unable to open or write to Natural spool file.

Text
Unable to open or write to Natural spool file.
Explanation
Printing was not successful for one of the following reasons:
- the temporary file cannot be opened or created;
- not enough memory is available;
- printer initialization was not successful.
Action
Check the temporary file path TMP̲PATH in the Natural.INI file.
If printing directly to a file, please check that the file name is
correctly set, and that the specified path (if any) exists.

NAT1584: NATSPOOL: Unable to start printer.

Text
NATSPOOL: Unable to start printer.
Explanation
To start a printer, NATSPOOL has to update the printer status.
If this record is in 'hold' by another user, NATSPOOL retries
10 times; thereafter, processing is terminated with this error.
Action
Try to restart the printer.
Increase ADARUN NH parameter to prevent Adabas response code 145.

NAT1585: NATSPOOL: Unable to set printer to status HUNG.

Text
NATSPOOL: Unable to set printer to status HUNG.
Explanation
When assigning status HUNG to a printer, NATSPOOL has to
update the printer status. When this record is in 'hold'
by another user, NATSPOOL retries 10 times; thereafter,
processing is terminated with this error.
Action
Check why the printer record is in 'hold'.

NAT1586: Unable to submit print job.

Text
Unable to submit print job.
Explanation
The print job could not be submitted for one of the following reasons:
- the printer name is unknown;
- printer initialization was not successful.
Action
Check your physical printer settings in NATPARM to ensure that they agree
with the actual printer name.

NAT1588: NATSPOOL: NAFEXIT4 completed with errors.

Text
NATSPOOL: NAFEXIT4 completed with errors.
Explanation
The user written exit NAFEXIT4 returns with error(s).
Action
Please check program.

NAT1589: NATSPOOL: NAFEXIT4 not found.

Text
NATSPOOL: NAFEXIT4 not found.
Explanation
The module NAFEXIT4 was not linked to the Natural nucleus.
Action
Please check you installation.

NAT1590: NATSPOOL: Getmain for RSO buffer failed.

Text
NATSPOOL: Getmain for RSO buffer failed.
Explanation
To support RSO directly, Natural Advanced Facilities
needs a buffer with a size of approximately 3700 bytes.
This buffer could not be allocated.
Action
Please check your installation.

NAT1591: NATSPOOL: WRLST macro failed using RSO support.

Text
NATSPOOL: WRLST macro failed using RSO support.
Explanation
Reports to be created using the RSO support of
Natural Advanced Facilities are written to a
BS2000 *SYSLST dataset.
Execution of the WRLST macro failed.
Action
Please switch on protocol and check for any errors.

NAT1592: NATSPOOL: PRNT macro failed using RSO support.

Text
NATSPOOL: PRNT macro failed using RSO support.
Explanation
Reports closed for printout are spooled to RSO
using the PRNT macro. Execution of this macro failed.
Action
Please switch on protocol and check for any errors.

NAT1593: NATSPOOL: Invalid printer no. for RSO support (internal).

Text
NATSPOOL: Invalid printer no. for RSO support (internal).
Explanation
The internal printer number given to module NAFRSO was invalid.
Action
Please check assembly of NAFRSO and take dump.

NAT1594: NATSPOOL: Invalid func. code for RSO support (internal).

Text
NATSPOOL: Invalid func. code for RSO support (internal).
Explanation
The module to handle the RSO direct support was called
using an incorrect internal function code.
Action
Please check assembly of NAFRSO and take dump.

NAT1595: NATSPOOL: No device name found for RSO support (internal)

Text
NATSPOOL: No device name found for RSO support (internal)
Explanation
The module to handle the RSO direct support was called
without setting a device name.
Action
Please check assembly of NAFRSO and take dump.

NAT1596: NATSPOOL: Allocate SYSLST failed for RSO support.

Text
NATSPOOL: Allocate SYSLST failed for RSO support.
Explanation
The allocation of the *SYSLST dataset failed.
Action
Please switch on protocl and check for any errors.

NAT1597: NATSPOOL: Line starts with invalid control character.

Text
NATSPOOL: Line starts with invalid control character.
Explanation
One or more lines of the report spooled by RSO direct support do
not contain a valid control character (line feed, form feed, etc.)
Action
Please check program.

NAT1598: NATSPOOL: Release SYSLST failed for RSO support.

Text
NATSPOOL: Release SYSLST failed for RSO support.
Explanation
Resetting the *SYSLST allocation to the primary one
has failed.
Action
Please switch on protocol and check for any errors.

NAT1599: Attempt to execute READ/WRITE WORK to non-existent file.

Text
Attempt to execute READ/WRITE WORK to non-existent file.
Explanation
The work file specified in the job control does not exist.
Action
Check allocation of work files.

NAT1600: Invalid stack function requested.

Text
Invalid stack function requested.
Explanation
See Natural Programmer's Guide for information on available
stack functions.
Action
Correct error.