Text |
A command queue overflow occurred. DB/FNR .../.... |
Expl. |
The database administrator may increase the value for the NC parameter, and/or the command may be issued when a lower level of command activity is in effect. |
Actn. |
Contact your database administrator. |
Text |
Internal user buffer too small. DB/FNR .../.... |
Expl. |
The internal user buffer was not large enough to contain the user buffer areas. The database administrator should increase the value of the LU parameter. |
Actn. |
Contact your database administrator. |
Text |
Previous Adabas call still in process. DB/FNR .../.... |
Expl. |
A "CALL Adabas" was issued by a user while a previous call for the user was still being processed. |
Actn. |
Contact your database administrator. |
Text |
Adabas call has been cancelled by the user. DB/FNR .../.... |
Actn. |
No action required. |
Text |
Too many ASSO/DATA blocks active in buffer pool. DB/FNR .../.... |
Expl. |
Too many Associator and Data Storage blocks were marked as active in the Adabas buffer pool for a single command. |
Actn. |
Contact your database administrator. |
Text |
Invalid RABN chain in header list. DB/FNR .../.... |
Expl. |
The RABN chain in the header list of the Adabas buffer pool was invalid. |
Actn. |
Contact your database administrator. |
Text |
No space for Adabas buffer pool header blocks. DB/FNR .../.... |
Expl. |
No additional space was available for Adabas buffer pool header blocks. |
Actn. |
Contact your database administrator. |
Text |
RABN was already in chain. DB/FNR .../.... |
Expl. |
The RABN to be linked into the RABN header chain was already in the chain. |
Actn. |
Contact your database administrator. |
Text |
Too many work areas allocated for command. DB/FNR .../.... |
Actn. |
Contact your database administrator. |
Text |
Descriptor invalid or non-existent. DB/FNR .../.... |
Expl. |
A descriptor name was either invalid or did not exist in the Descriptor Value Table. |
Actn. |
Check program and correct error, or contact your database administrator. |
Text |
Error detected in inverted list index. DB/FNR .../.... |
Expl. |
An error was detected in an inverted list index; a descriptor value was not found during a delete operation. o Locate the descriptor that caused the error in the additions 2 field of the user control block. o Run the VERIFY option of ADAINV for this descriptor and save the output. o Reinvert the descriptor. o If necessary, restart the database (if this is possible). o Send the following information to your nearest support centre: - the output of the VERIFY option of ADAINV; - all available PLOGs; - the FDT of the file containing the error; - if the nucleus crashed, the crash directory. |
Actn. |
See explanation. |
Text |
Error detected in inverted list index. DB/FNR .../.... |
Expl. |
An error was detected in an inverted list index; a descriptor value was already present during an insert operation. o Locate the descriptor that caused the error in the additions 2 field of the user control block. o Run the VERIFY option of ADAINV for this descriptor and save the output. o Reinvert the descriptor. o If necessary, restart the database (if this is possible). o Send the following information to your nearest support centre: - the output of the VERIFY option of ADAINV; - all available PLOGs; - the FDT of the file containing the error; - if the nucleus crashed, the crash directory. |
Actn. |
See explanation. |
Text |
Internal CID for coupling processing not found. DB/FNR .../.... |
Expl. |
An internal "CID" required during coupling processing was not found. |
Actn. |
Contact your database administrator. |
Text |
Adabas RABN for the command not found. DB/FNR .../.... |
Expl. |
The Adabas RABN required for the command could not be found. |
Actn. |
Contact your database administrator. |
Text |
Constant set used by Adabas not found. DB/FNR .../.... |
Actn. |
Contact your database administrator. |
Text |
ISN less than MINISN or greater than MAXISN. DB/FNR .../.... |
Expl. |
An ISN was either less than the MINISN setting or greater than the MAXISN setting in effect for the file. |
Actn. |
Check program and correct error, or contact your database administrator. |
Text |
An invalid data storage RABN was detected. DB/FNR .../.... |
Actn. |
Contact your database administrator. |
Text |
Starting RABN for L2/L5 not in address converter. DB/FNR .../.... |
Expl. |
The starting data storage RABN for an L2/L5 command was not contained in the address converter for the file. |
Actn. |
Check program and correct error, or contact your database administrator. |
Text |
Error in call to Adabas subroutine/inverted list. DB/FNR .../.... |
Expl. |
An incorrect call to an Adabas subroutine or an inconsistency in an inverted list was detected. |
Actn. |
Check program and correct error, or contact your database administrator. |
Text |
Record not found in indicated DATA Storage block. DB/FNR .../.... |
Expl. |
A record could not be found in the Data Storage block which should have contained it as indicated by the Address Converter. |
Actn. |
Contact your database administrator. |
Text |
FDT and internal format buffer not consistent. DB/FNR .../.... |
Expl. |
An inconsistency was detected between the Field Description Table (FDT) and the internal format buffer; or an internal occurred when updating a multiple-value field. |
Actn. |
Contact your database administrator. |
Text |
Start of transaction not found on autobackout. DB/FNR .../.... |
Expl. |
The start of a transaction could not be found when an "autobackout" was executed. |
Actn. |
Check program and correct error, or contact your database administrator. |
Text |
Necessary ET data not found in WORK block. DB/FNR .../.... |
Expl. |
The necessary ET data were not found in the appropriate WORK block. |
Actn. |
Correct error or contact your database administrator. |
Text |
Internal no. for database I/O operation invalid. DB/FNR .../... |
Expl. |
An internally assigned number for a database I/O operation was found to be invalid. |
Actn. |
Contact your database administrator. |
Text |
A phonetic field name could not be found. DB/FNR .../.... |
Actn. |
Check program and correct error, or contact your database administrator. |
Text |
ADAM field not found in compressed record. DB/FNR .../.... |
Actn. |
Contact your database administrator. |
Text |
Referential integrity violated (DB/FNR/sub/con .../.../.../...). |
Expl. |
The command has been rejected by Adabas. Referential integrity has been violated. The error message shows the database ID, file number, subcode and constraint name of the violated constraint. |
Actn. |
Handle the referential integrity violation; for example, by issuing an appropriate error message. |
Text |
Pool for unique descriptor values too small. DB/FNR .../.... |
Actn. |
Contact your database administrator. |
Text |
Value for unique descriptor already exists. DB/FNR .../.... |
Expl. |
An attempt was made to duplicate a value for a unique descriptor. |
Actn. |
Check program and correct error, or contact your database administrator. |
Text |
Inconsistency in inverted list index. DB/FNR .../.... |
Expl. |
During an UPDATE opertion, an inconsistency was detected in an inverted list index. |
Actn. |
Contact your database administrator. |
Text |
Security violation or invalid cipher code. DB/FNR .../.... |
Actn. |
Check program and correct error, or contact your database administrator. |