This section contains the informational and error messages issued by the Natural Global buffer pool manager under z/OS and under z/VSE.
All messages have the format:
GBPnnnn xxxxxxxx:
message text
|
- where:
nnnn is the message number.
xxxxxxxx is the job name, under which the Natural global buffer pool is running.
For ease of use, the job name message portion has been omitted in the following list of messages. Notation in italics indicates a variable message portion.
The following topics are covered below:
The Natural global buffer pool manager syntax error messages are self-explanatory with xxxx being the invalid command or parameter.
For appropriate command and parameter syntax, refer to Natural Global buffer pool manager under z/OS and Natural Global buffer pool manager under z/VSE in the Operations documentation.
| Message Number | Message Text |
|---|---|
| GBP0001 | Invalid command: xxxx |
| GBP0002 | More than one command specified |
| GBP0003 | Invalid parameter keyword: xxxx |
| GBP0004 | Buffer pool name parameter missing |
| GBP0005 | Invalid buffer pool name: xxxx |
| GBP0006 | Leading parenthesis missing in NATBUFFER |
| GBP0007 | Ending parenthesis missing in NATBUFFER |
| GBP0008 | Buffer pool size not numeric: xxxx |
| GBP0009 | Buffer pool size less than 100K: xxxx |
| GBP0010 | Buffer pool size too large: xxxx |
| GBP0011 | Invalid MODE specified: xxxx |
| GBP0012 | Text block size not numeric: xxxx |
| GBP0013 | Text block size must be 1,2,4,8,12 or 16, not xxxx |
| GBP0014 | Invalid buffer pool type: xxxx |
| GBP0015 | Invalid preload list name: xxxx |
| GBP0016 | Invalid sub-system ID: xxxx |
| GBP0017 | IDLE time not numeric: xxxx |
| GBP0018 | IDLE time out of valid range: xxxx |
| GBP0019 | Buffer pool cache size not numeric: xxxx |
| GBP0020 | Buffer pool cache size out of valid range: xxxx |
| GBP0021 | RESIDENT must be Y or N or A, not xxxx |
| GBP0022 | METHOD must be S or N, not xxxx |
| GBP0023 | CONFIRM must be Y or N, not xxxx |
| GBP0024 | PLUGIN must be BP or NOBP, not xxxx |
| GBP0025 | REGISTER must be Y or N, not xxxx |
| GBP0026 | NAT buffer pool size less than 256K: xxxx |
| GBP0029 | CC must be Y or N, not xxxx |
In the following table, error-info format is:
failing function (macro), sub-function, request return (RC) or cancel code (CC), request failure reason code
Please see the relevant IBM documentation for an explanation of the return or abend codes of the relevant IBM request macro.
| Message Number | Message Text |
|---|---|
| GBP0000 | xxxx (dummy message consisting only of a variable message part) |
| GBP0098 | Parameter module missing or invalid: pgm-name |
| GBP0099 | Message text module missing or invalid: pgm-name |
| GBP0100 | No parameters specified |
| GBP0101 | Specified parms: xxxx |
| GBP0102 | Operator input: xxxx |
| GBP0103 | Input from file: xxxx |
| GBP0104 | Mandatory module missing or invalid: pgm-name |
| GBP0105 | Storage could not be obtained: xxxx |
| GBP0106 | FREEMAIN not successful |
| GBP0107 | NAME/TOKEN service failure: error-info |
| GBP0108 | Buffer pool manager module incompatible: pgm-name |
| GBP0109 | Pool (de)allocation failure: error-info |
| GBP0110 | GBP not active: gbp-name/subsid |
| GBP0111 | GBP active: gbp-name/subsid - DIR=dir-addr ADDR=gbp-addr |
| GBP0112 | GBP refreshed: gbp-name/subsid - DIR=dir-addr ADDR=gbp-addr |
| GBP0113 | GBP stopped: gbp-name/subsid - DIR=dir-addr ADDR=gbp-addr |
| GBP0114 | GBP already active: gbp-name/subsid - DIR=dir-addr ADDR=gbp-addr |
| GBP0115 | GBP still in use: gbp-name/subsid - DIR=dir-addr ADDR=gbp-addr |
| GBP0116 | Associated GBP has been lost gbp-name/subsid |
| GBP0117 | Shutdown forced for GBP gbp-name/subsid |
| GBP0118 | Reply Y to force shutdown of GBP gbp-name/subsid |
| GBP0119 | Shutdown aborted, reply was x |
| GBP0120 | Creating cache for GBP: gbp-name/subsid |
| GBP0121 | Deleting cache for GBP: gbp-name/subsid |
| GBP0122 | GBP cache creation failure: error-info |
| GBP0123 | GBP cache deletion failure: error-info |
| GBP0124 | GBP cache created: cache-name,cache-token,cache-ALET |
| GBP0125 | GBP cache deleted: cache-name,cache-token,cache-ALET |
| GBP0126 | ALET stack overflow. Cannot create GBP cache |
| GBP0127 | Cache already exists for GBP: gbp-name/subsid |
| GBP0128 | No cache available for GBP: gbp-name/subsid |
| GBP0129 | GBP cache not owned by job job-name |
| GBP0130 | No global buffer pool available for SUBSID: subsid |
| GBP0131 | List of all global buffer pools with SUBSID: subsid |
| GBP0132 | BP-Name/SUBSID Size(KB) A(GBP) A(DIR) ALET Cache Size Cache Owner |
| GBP0133 | About to shutdown the following global buffer pools |
| GBP0134 | Reply Y to continue shutdown of global buffer pools |
| GBP0135 | No global buffer pool matching selection criteria |
| GBP0136 | Job does not own GBP cache(s) |
| GBP0137 | GBP cache(s) owned by job job-name |
| GBP0138 | Data space cache not supported in non-ESA environment |
| GBP0139 | GBP(s) owned by job: job-name |
| GBP0140 | RESIDENT=N ignored due to owning GBP cache(s): |
| GBP0141 | TERMINATE aborted due to owning GBP cache(s): |
| GBP0142 | RESIDENT=N ignored due to owning GBP(s): |
| GBP0143 | TERMINATE aborted due to owning GBP(s): |
| GBP0144 | GBP not allocated due to user key pool not possible |
| GBP0145 | Global parameter settings: xxxx |
| GBP0149 | Service request failure: service, error-info |
| GBP0150 | Formatted dump |
| GBP0151 | Formatted dump for GBP gbp-name/subsid |
| GBP0154 | Global buffer pool manager not operational |
| GBP0158 | Bad retcode from NATBPMG4, function REINIT: rtc |
| GBP0159 | Bad retcode from NATBPMG4, function INIT: rtc |
| GBP0197 | No Zaps applied |
| GBP0198 | Applied Zaps: |
| GBP0199 | Natural Global Buffer Pool Manager Version: xxxx |
In the following table, error-info format is:
failing function (macro), sub-function, request return (RC) or cancel code (CC), request failure reason code
Please see the relevant IBM documentation for an explanation of the return or abend codes of the relevant IBM request macro.
The following messages are listed below:
Messages Issued by the Global Buffer Pool Manager Operating-system-dependent Driver Modules
Messages Issued by the Global Buffer Pool Manager z/OS Driver Module
Messages Issued by the Global Buffer Pool Manager z/VSE Driver Module
| Message Number | Message Text |
|---|---|
| GBP0200 | Specified file does not exist: file-name |
| GBP0201 | Reading parm input from file file-name |
| GBP0202 | EOF encountered reading file file-name |
| GBP0203 | Error reading file file-name |
| GBP0204 | Subsystem storage protection feature is required |
| GBP0205 | Insufficient authorization: error-info |
| GBP0206 | Job cancelled by operator |
| GBP0207 | Job cancelled due to unrecoverable abend abend-code |
| Message Number | Message Text |
|---|---|
| GBP0300 | Sorry, z/OS is required |
| GBP0301 | Only MODIFY or
STOP commands allowed
|
| GBP0302 | STOP command received from operator
|
| GBP0303 | GBP allocated in system key due to
ALLOWUSERKEYCSA(NO) |
| Message Number | Message Text |
|---|---|
| GBP0400 | Sorry, VSE/ESA 2.4 or higher is required |
| GBP0401 | Ready for communications |
| GBP0402 | No input received from operator |
| GBP0403 | Job cancelled due to JCL overrun |