Natural System Error Messages 1100-1149

NAT1100: Input value for a numeric field is not numeric.

Text
Input value for a numeric field is not numeric.
Explanation
The input value for a numeric field must contain a valid numeric
value. The value may be preceded and/or followed by one or more blanks.
Only one sign and decimal character are permitted.
The value must not be longer than the field.
Action
Enter a valid numeric value.

NAT1101: The specified maximum page count has been exceeded.

Text
The specified maximum page count has been exceeded.
Explanation
The value for the maximum number of pages, as specified with the
Natural session parameter MP, has been exceeded.
Action
Increase the value of the MP parameter,
or reduce the number of pages produced.
If you do not want to limit the number of pages, set MP=0 (zero).

NAT1102: Input hexadec. value does not contain hexadec. characters.

Text
Input hexadecimal value does not contain hexadecimal characters.
Explanation
For the specification of hexadecimal input, only the
characters "0" to "9" and "A" to "F" may be used.
Action
Enter valid hexadecimal characters.

NAT1103: Field number in REINPUT statement must not exceed 255.

Text
Field number in REINPUT statement must not exceed 255.
Explanation
The field number to mark a field in the REINPUT statement may
be specified as a numeric constant or the content of a numeric
integer variable with a value of 255 or less.
Action
Check program and correct error.

NAT1104: Classical I/O not permitted while modal window is active.

Text
Classical I/O not permitted while modal window is active.
Explanation
When a modal window has been activated by a PROCESS PAGE MODAL
statement, a classical I/O (WRITE, PRINT, DISPLAY, INPUT) is not
permitted.
In a modal window, only rich GUI processing initiated by a PROCESS
PAGE statement is allowed.
Action
Check program and correct error.

NAT1105: Undefined keyword :1: in input.

Text
Undefined keyword ... in input.
Explanation
In keyword/delimiter input mode, individual fields can be selected
via keywords, that is, the field name or the text that was specified
preceding the field name in the INPUT statement.
The specified value cannot be identified as a keyword from the
INPUT statement.
Action
Either use %F or IM=F for forms mode in order to be prompted with
keyword text, or use the correct keyword value.

NAT1106: Value (length :2:) too long for input field (length :1:).

Text
Value (length ...) too long for input field (length ...).
Explanation
The data string entered for a field in delimiter mode is
longer than the internal length definition of the field.
Action
Enter a data string of correct length.

NAT1107: PROCESS PAGE (MODAL) not supported.

Text
PROCESS PAGE (MODAL) not supported.
Explanation
The execution of a PROCESS PAGE (MODAL) statement is only
supported when Natural is running as a Rich GUI server.
Action
Purchase/install/configure the appropriate components.

NAT1108: REINPUT statement not preceded by INPUT statement.

Text
REINPUT statement not preceded by INPUT statement.
Explanation
When a REINPUT statement is to be executed, the last communication
with the screen must have been via an INPUT statement.
REINPUT is not permitted for a screen that was produced by a WRITE
or DISPLAY statement.
Neither is REINPUT permitted for an INPUT statement inside a loop,
subroutine or special condition block, when the loop, subroutine or
special condition block has already been terminated.
e.g.: REPEAT
         INPUT ...
         ESCAPE
      LOOP
      REINPUT   will produce this error because at execution of the
                REINPUT statement the loop which contains the respective
                INPUT statement has already been closed.
Action
Check program and correct error.

NAT1109: REINPUT cannot be executed in batch mode.

Text
REINPUT cannot be executed in batch mode.
Explanation
A program containing a REINPUT statement cannot be executed
in batch mode.
Action
Do not execute REINPUT in batch mode.

NAT1110: Restart after synchronizing OBJIN and SYNIN.

Text
Restart after synchronizing OBJIN and SYNIN.
Explanation
If an input error occurs, Natural must terminate the current program.
The restart point is defined as the next "%%" (that is, the current
terminal-control function value) in both OBJIN and SYNIN.
After flushing input from both OBJIN and SYNIN until the next "%%",
Natural resumes processing with the next command after "%%" in SYNIN
and reads input data after the next "%%" in OBJIN.
Note: The first "%" is the character indicating a terminal command.
      It may be any special character, as defined by the Natural
      administrator with the Natural session parameter CF or by the
      GLOBALS command or a SET GLOBALS statement.
Action
Check input data and correct error.

NAT1111: Error in input data stream.

Text
Error in input data stream.
Explanation
An invalid character was detected after the equal sign "="
in the input data stream.
Action
Check the usage of assign characters in the input data stream.

NAT1112: No data entered for a mandatory input field.

Text
No data entered for a mandatory input field.
Explanation
Input fields can be defined with the option that an input value
is required, in which case it must be supplied with the INPUT
statement.
Action
Enter a valid value.

NAT1113: Subroutine was not entered via PERFORM.

Text
Subroutine was not entered via PERFORM.
Explanation
The REINPUT statement refers to a previous INPUT statement that is
located in a subroutine; or a RETRY statement refers to a database
statement that is located in a subroutine.
Action
Check program and correct error.

NAT1114: Internal output buffer overflow, :1:.

Text
Internal output buffer overflow, ....
Explanation
An overflow condition occurred during the writing of information
to an output area.
Action
Reduce the program-defined page size and then re-run the program,
or start the Natural session with an increased page size (PS).

NAT1115: Invalid alphabetic value for SET GLOBALS statement.

Text
Invalid alphabetic value for SET GLOBALS statement.
Explanation
Permitted values are:
  CC     ON/OFF            CF  any character
  DU     ON/OFF            DC  any character
  EJ     ON/OFF            IA  any character
  FS     ON/OFF            ID  any character
  LE     ON/OFF            IM  F/D
  RECAT  ON/OFF            PM  C/I/N
  SA     ON/OFF            DFSTACK  S/I/C
  WH     ON/OFF            DFOUT    S/I
  ZD     ON/OFF
  ZP     ON/OFF
Note: "T" and "F" are synonyms of "ON" and "OFF" respectively.
Action
Check program and correct error.

NAT1116: Invalid numeric value for SET GLOBALS statement.

Text
Invalid numeric value for SET GLOBALS statement.
Explanation
Valid values are:
  LS  0-250
  LT  0-2147483647  but must not exceed default LT value supplied
                    at session start.
  MT  0-maximum determined by operating environment.
  PD  0-255
  PS  0-250
  SF  1-30
  SL  20-80
Action
Check program and correct error.

NAT1117: Requested map not available.

Text
Requested map not available.
Explanation
A map to be used in an INPUT USING MAP must exist in object
form in the current library; however, the requested map was
not found in the current library.
Action
Make sure you are using the correct library and the correct map name.

NAT1118: Format/length conflict in loaded map.

Text
Format/length conflict in loaded map.
Explanation
The fields specified in the INPUT USING MAP statement must agree in
sequence, format and length with the fields defined in the map.
Action
Check program and map and correct error.

NAT1119: The loaded map is incompatible with the variable list.

Text
The loaded map is incompatible with the variable list.
Explanation
The fields in the INPUT USING MAP statement must agree in sequence
and number with the fields defined in the map.
However, the number of elements in the loaded map is not the same
as in the supplied variable list.
Action
Check program and correct error.

NAT1120: Positional parameter must not override pre-entered value.

Text
Positional parameter must not override pre-entered value.
Explanation
To a positional parameter entered in delimiter mode no more
than one value may be assigned. For example:
   %1=VALUE1,VALUE2   -> will produce this error.
   VALUE1,%1=VALUE2   -> is a correct specification, as
                         Natural allows specified positions
                         or keys to override values entered
                         in positional mode.
Action
Check input and correct error.

NAT1121: Number in "%nnn" out of range.

Text
Number in "%nnn" out of range.
Explanation
The field position requested by "%nnn" is not defined in the
INPUT statement. The highest possible number is determined by
the number of input fields defined.
Action
Enter valid number for input field.

NAT1122: No "=" found after "%nnn".

Text
No "=" found after "%nnn".
Explanation
Natural treats "%nnn" as a keyword. A value must be
specified after the assign character: %nnn=value.
Action
Use valid syntax construct for input value.

NAT1123: Number in "%nnn" not numeric.

Text
Number in "%nnn" not numeric.
Action
Enter integer field number for field selection.

NAT1124: End of file in input after continuation.

Text
End of file in input after continuation.
Explanation
A data concatenation was requested in the data stream for an INPUT
statement, but no data were found in the next line.
Action
Enter data in continuation line.

NAT1125: Too many significant digits in numeric input value.

Text
Too many significant digits in numeric input value.
Explanation
The integer part of a numeric input value contains more
significant digits than defined in the variable definition.
Action
Enter valid input data.

NAT1126: PROCESS PAGE UPDATE not preceded by PROCESS PAGE statement.

Text
PROCESS PAGE UPDATE not preceded by PROCESS PAGE statement.
Explanation
When a PROCESS PAGE UPDATE statement is to be executed, the last
communication with an external rendering engine must have been
via a PROCESS PAGE statement.
No INPUT, WRITE, PRINT or DISPLAY statements may be executed between
a PROCESS PAGE statement and its corresponding PROCESS PAGE UPDATE
statement.
It is not possible, however, to place a PROCESS PAGE statement
within a loop, subroutine or special condition block, and then
execute the PROCESS PAGE UPDATE statement when the status under which
the PROCESS PAGE statement was executed has already been terminated.
Action
Check program and correct error.

NAT1127: Error during assignment of floating point variable(s).

Text
Error during assignment of floating point variable(s).
Explanation
The most likely cause of this error is that one of the variables
overflowed. Single-precision floating-point variables (format/length F4)
can only represent values of a precision of approximately 7 digits.
Double-precision floating-point variables (format/length F8)
can be used to represent values of a precision of approximately
19 digits.
Action
Check program and correct error.

NAT1128: Values for "DC", "IA", "ID" must exclude one another.

Text
Values for "DC", "IA", "ID" must exclude one another.
Explanation
A value for one of the parameters DC, IA or ID has been specified
with a SET GLOBALS statement which is the same as the value for
one of the other two parameters.
Action
Specify values for DC, IA, and ID which are different from one another.

NAT1129: Physical terminal buffer overflow.

Text
Physical terminal buffer overflow.
Explanation
The physical terminal buffer has overflowed during execution of an
INPUT statement. As the execution of an INPUT statement implies
immediate writing of the resulting map to the terminal, an overflow
condition is regarded as an error.
Action
Decrease the number of fields to be displayed; or ask your Natural
administrator to increase, if possible, the size of the physical
terminal buffer (in the TP-driver source).

NAT1130: Unintended century switch when stacking date string.

Text
Unintended century switch when stacking date string.
Explanation
DFSTACK=C has been specified, i.e. date strings are put on
the stack without the century information (Natural V22 mode).
When recovering this information (under control of a Sliding
Window or the current century), an unintended century switch
would occur: the year is not within the range of the sliding
window or not in the current century.
Action
Correct error in program or specify DFSTACK=I.

NAT1131: Screen input/output error.

Text
Screen input/output error.
Explanation
The terminal driver has returned an error during a read/write
operation to a terminal device.
Action
Ensure that the terminal device being used is supported by Natural.

NAT1132: Line size mismatch in IOPATTR buffer at offset :1:.

Text
Line size mismatch in IOPATTR buffer at offset ....
Explanation
A mismatch between page buffer and page-attribute buffer
has been detected. This error most probably occurs because
not all lines of the page buffer have been generated with
the same line size.
Action
Check your programs for FORMAT statements with different
line sizes.

NAT1133: Invalid terminal function requested.

Text
Invalid terminal function requested.
Action
Enter valid terminal function.

NAT1134: Terminal function not supported.

Text
Terminal function not supported.
Action
Press ENTER to continue the session.

NAT1135: Hardcopy function not supported.

Text
Hardcopy function not supported.
Explanation
The hardcopy (%H) function requires a spooling subsystem
and a valid device address.
These are not available for the active terminal/TP monitor.
Action
Contact your Natural administrator concerning hardcopy support.

NAT1136: More than 250 lines in an output page.

Text
More than 250 lines in an output page.
Explanation
An output statement was executed which results in more than
250 lines in the current output page. The maximum value for
the PS parameter is 250.
Action
Check program and correct error.

NAT1137: Date is outside valid range.

Text
Date is outside valid range.
Explanation
A date or time field contains a value which does not represent a
valid date. Possible reasons are:
- The date value is less than 1582 or greater than 9999.
- The date value is to be edited as Roman numerals, but the date value
  is greater than 2887.
- The value is negative or not a valid packed number.
Action
Check program and correct error.

NAT1138: SKIP value is invalid.

Text
SKIP value is invalid.
Explanation
A value greater than 250 must not be specified in a SKIP statement.
Action
Enter a valid value.

NAT1139: Input for "mandatory full" field is not complete.

Text
Input for "mandatory full" field is not complete.
Explanation
The value for a field that is defined as "mandatory full" must
fill the field completely.
Action
Enter a valid value.

NAT1140: Input is not a floating point number.

Text
Input is not a floating point number.
Explanation
The input entered was not a valid floating point number.
A valid floating point number starts with an optional sign (+,-),
followed by a mantissa with at most one decimal point and an optional
exponent.
The exponent has to start with the character "E", followed by an
optional sign (+,-), followed by one or two decimal digits.
Action
Enter a valid number.

NAT1141: Input results in floating point overflow.

Text
Input results in floating point overflow.
Explanation
A positive or negative floating point number was entered,
which is too large for floating point processing.
Action
Enter a valid number.

NAT1142: Input results in integer value overflow.

Text
Input results in integer value overflow.
Explanation
An integer value was entered which is too large
to be processed as indicated in the program.
Action
Enter a valid integer value.

NAT1143: Input does not correspond to input edit mask.

Text
Input does not correspond to input edit mask.
Explanation
Data were input which do not correspond to the input mask
as defined within the program.
Action
Correct error.

NAT1144: Data to be assigned/output do not correspond to edit mask.

Text
Data to be assigned/output do not correspond to edit mask.
Explanation
One of the following errors occurred:
- A MOVE EDITED statement was issued with a target edit mask,
  and the source data do not correspond to the target edit mask.
- A DISPLAY/INPUT/PRINT/WRITE statement was issued with an edit mask,
  and the source data do not correspond to the specified edit mask.
Action
Check program and correct error.

NAT1145: Input does not match edit mask :1:.

Text
Input does not match edit mask ....
Explanation
The data value entered for an input field does not correspond to the
edit mask assigned to the field.
Action
Enter a value which is suitable for the edit mask displayed.

NAT1147: Illegal use of DISPLAY GIVING SYSTEM FUNCTIONS.

Text
Illegal use of DISPLAY GIVING SYSTEM FUNCTIONS.
Explanation
Only one DISPLAY GIVING SYSTEM FUNCTIONS may be used per
report. This applies also to external routines such as
CALLNATS, external subroutines, etc.
Action
Check program and called routines and remove duplicate
DISPLAY GIVING SYSTEM FUNCTIONS.

NAT1148: No help available for this data field.

Text
No help available for this data field.
Explanation
The help key was pressed or the help character was entered
for a field for which no error text or error routine has been
defined.
Action
Ask your Natural administrator for assistance.

NAT1149: Requested message is not available.

Text
Requested message is not available.
Explanation
A user-defined message, which was requested by a REINPUT
statement, is not contained in the database.
Action
Contact your Natural administrator.