Active User Information

This section covers the following topics:


Functional Overview

The Summary of Active Users function displays the system resources used by all active users that have logged on to Natural since the initialization of CICS. An active user is one who is currently logged on to Natural under CICS.

The system resources used by each active user are captured in the following statistics:

  • The total number of seconds that the user's task is waiting for the database;

  • The amount of data sent back to the terminal;

  • The average response time for the user's transactions.

The following display and windows are available within the Summary of Active Users function:

  • Summary of Active Users Display
    Presents a list of all active users and a line of information for each user that is four screens wide.

  • Lowest 20 Window
    Lists the 20 users who are associated with the smallest values of a system resource sort list.

  • Highest 20 Window
    Lists the 20 users who are associated with the largest values of a system resource sort list.

  • Summary of Active User Window
    Provides the same information as on the Summary of Active Users screen, but presents it in table form on a single screen for a single user.

  • Natural Call Table Window
    Lists all Natural programs accessed by the user's last or current transaction as well as detailed information about the database calls issued by these Natural programs.

Anmerkung:
Historical data is not available for the Summary of Active Users function.

Summary of Active Users Display

Beginn der AnweisungslisteTo access the Natural Monitor Summary of Active Users display

  1. From any screen outside Natural Monitor, type the code NM SA on the command line and press ENTER, or

  2. From any screen within Natural Monitor, type SA on the command line and press ENTER.

The Summary of Active Users display comprises four screens, which are shown on the following pages. This is the first screen:

  16:45:09                 ***** REVIEW NM UTILITY *****               2006-03-02
                            - Summary of Active Users -
  
  TP       Sess  Terminal  Trans     Trans  Session    Last Trans  Last Trans
  Userid     Id  Name      Name     Number  Status     Date        Time
  REVHIST     1  Subtask   NC22         20  Inactive   2006-03-02  16:45:00
  GGS        12  0824      NC22       1928  Active     2006-03-02  16:44:44
  REC        13  0838      N          1610  Inactive   2006-03-02  15:55:36
  GGS        19  0773      NC22       1926  Inactive   2006-03-02  16:45:05
  REC        16  0795      NR23       1576  Terminate  2006-03-02  15:51:29
  
  
  
  
  
  
  
  
  
  
  
  Command ===>
  Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
        Help  STerm Exit  SUser SSid  Low   High   +    Pick        ===>  Menu

This is the second screen:

  16:45:46                 ***** REVIEW NM UTILITY *****               2006-03-02
                            - Summary of Active Users -
  
  TP       __________________NATURAL__________________ _____Last_____   Curr/Last
  Userid   Userid   Appl     Program  Stmt Lvl Thd Ver Cmd  DBID  FNR DB Duration
  REVHIST  REVHIST  SYSREVNM S-NMRTST 2570   2   1 2.2 RC     10   73    0.00032
  GGS      GGS      SYSREVNM N-NMSA10 3630   2   2 2.2 RC     10    0    0.00624
  REC      REC      SYSREVNM M-NMSA   0016   2   4 2.2 RC     10   45    0.00640
  GGS      GGS      GGS      AHELLO   0000   0   3 2.2 RC     10    0    0.00656
  REC      REC      REC      MAINMEM1 0016   2   0 2.3 RC     10   49    0.00032
  
  
  
  
  
  
  
  
  
  
  
  Command ===>
  Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
        Help  STerm Exit  SUser SSid  Low   High   +    Pick  <===  ===>  Menu

This is the third screen:

  16:46:10                 ***** REVIEW NM UTILITY *****               2006-03-02
                            - Summary of Active Users -
  
  TP      _____________________Database______________________
  Userid  Curr Calls      Calls Call/Tran ElpT/Call CmdT/Call
  REVHIST        701        747    747.00     0.020   0.00270
  GGS              0     22,227     86.82     0.003   0.00051
  REC              0        263     52.60     0.009   0.00084
  GGS              0        113    113.00     0.014   0.00100
  REC              0         31     31.00     0.005   0.00081
  KKR              0         13     13.00     0.000   0.00046
  
  
  
  
  
  
  
  
  
  
  Command ===>
  Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
        Help  STerm Exit  SUser SSid  Low   High   +    Pick  <===  ===>  Menu

This is the fourth screen:

  16:46:34                 ***** REVIEW NM UTILITY *****               2006-03-02
                            - Summary of Active Users -
  
  TP       Avg Resp   Total   Term  Logon       Logon
  Userid       Time   Trans   Data  Date        Time
  REVHIST     1.999       1      0  2006-03-02  12:43:29
  GGS         0.243     485   482K  2006-03-02  14:41:18
  REC         0.126      33  12336  2006-03-02  15:47:34
  GGS         2.267       1      0  2006-03-02  16:45:03
  REC         0.211       1      0  2006-03-02  15:51:29
  KKR         0.340       1      0  2006-03-02  16:45:54
  
  
  
  
  
  
  
  
  
  
  Command ===>
  Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
        Help  STerm Exit  SUser SSid  Low   High   +    Pick  <===        Menu

The following PF keys and commands are available from these screens:

PF Key Command Description
PF1 HELP Invoke online help.
PF2 STERM
SORTTERM
Sort users in ascending order by terminal name.
PF3 EXIT Exit this function.
PF4 SUSER
SORTUSER
Sort users in ascending order by user ID.
PF5 SSID
SORSID
Sort users in ascending order by SID.
PF6 LOW Show the lowest 20 values (or user IDs in an alphabetic sort) for the field column indicated by the cursor position.
PF7 HIGH Show the highest 20 values (or user IDs in an alphabetic sort) for the field column indicated by the cursor position.
PF8 + Scroll the display forward one page.
When the bottom of the list is reached, the use of the PF key or the command causes the list to wrap to the top of the list.
  TOP Go to the top of the display.
PF9 PICK Display all information for a user indicated by the cursor.
PF10 LEFT Scroll the display left one screen.
PF11 RIGHT Scroll the display right one screen.
PF12 MENU Return to the Natural Monitor Main Menu.

Anmerkung:
No PF key is available for the TOP command.

Statistical Fields on the Summary of Active Users Display

The fields available on the four Summary of Active Users screens are described in the following table:

Field Description
TP Userid The CICS user id for the transaction. Corresponds to Natural system variable *INIT-USER.
Sess Id The unique Natural Monitor session identification number for the Natural session.
Terminal Name The CICS terminal name. Corresponds to Natural system variable *INIT-ID.
Trans Name The CICS transaction ID.
Trans Number The CICS transaction number.
Session Status
The current status of the Natural session. The following values are possible:
Active Session actively processing.
Inactive Terminal I/O or other wait.
DB Call Database call processing.
Logon Session initialization.
Terminate  Marked for termination.
Last Trans Date The end date of the last transaction.
Last Trans Time The end time of the last transaction.
Natural Userid The Natural user ID for the transaction. Corresponds to system variable *USER.
Natural Appl The Natural application for the transaction. Corresponds to system variable *LIBRARY-ID.
Natural Program The name of the Natural program that is currently being executed.
Natural Stmt The statement line number within the Natural program currently being executed.
Natural Lvl The execution level of the Natural program currently being executed.
Natural Thd The Natural storage thread number for the transaction. 0 indicates that a getmained storage thread or no thread was used.
Natural Ver The Natural version for the session. Possible value: vr; where vr represents the relevant product version.
Last Cmd The last database command issued.
Last DBID The last database ID accessed.
Last FNR The last database file number accessed.
Curr/Last Duration The duration of the current or the last database call in seconds.
Database Curr Calls The number of database calls issued by the current or last transaction.
Database Calls The total number of database calls that have been issued by the session.
Database Call/Tran The average number of database calls per transaction for the session.
Database ElpT/Call The average elapsed time per database call in seconds for the session.
Database CmdT/Cal The average database command time for all database calls issued during the session.
Avg Resp Time The average response time in seconds for all transactions of the session.
Total Trans The total number of transactions that have been executed for the session.
Term Data The number of bytes that have been written to the user's terminal screen.
Logon Date The session start date in YYYY/MM/DD format.
Logon Time The session start time in HH:MM:SS format.

Additional Commands for the Summary of Active Users Function

There are several additional commands and PF keys that are available for use on the summary of all users and individual summary screens within this function. They are:

Command PF Key Description
CANCEL  
The specified session is terminated abnormally. A session may be cancelled by TP user ID (uuu), terminal name (tttt) or session ID (nnn), see below.
Format Example
CANCEL U=uuuuuuu   CANCEL U=ABC
CANCEL T=tttt CANCEL T=T031
CANCEL nnn CANCEL 37
DISPLAY ACT
DI ACT
  Display all sessions except such with status Inactive or Terminate.
DI ALL   Display all sessions.
EXIT PF3 Exit from the display.
FORCE   Deactivates Natural Monitor monitoring for the specified session. It does not affect the Natural session. A session may be forced by TP user ID, terminal name or session ID. The command format is the same as for the CANCEL command.
HELP PF1 Access the help system.
HIGH PF7 Display the Highest 20 window for the field marked by the cursor.
LEFT PF10 Scroll left one screen.
LOW PF6 Display the Lowest 20 window for the field marked by the cursor.
PICK PF9 Access a one page window of all the information available for the desired session. Enter PICK nnn with session ID nnn or position the cursor on the desired session line and press PF9.
RIGHT PF11 Scroll the display right one screen.
STERM PF2 Sort the display by terminal name.
SSID PF5 Sort the display by session ID.
SUSER PF4 Sort the display by TP user ID.
TERMNAT   The specified session is terminated normally. A session may be terminated by TP user ID, terminal name or session ID. The command format is the same as for the CANCEL command.
TOP   Scroll to the top of the display.
+ PF8 Scroll forward one screen.

The TERMNAT command causes Natural Monitor to issue an internal Natural cancel against a user. When Natural detects that the user session has been cancelled, the user's Natural session terminates normally.

The CANCEL command functions just like the TERMNAT command, except that an RNMA ABEND is received by the user who is forced and his Natural session is terminated abnormally, causing the ABEND.

The FORCE command deactivates Natural Monitor monitoring for the specified session. It does not affect the Natural session. The forced Natural session continues to run without monitoring.

Additionally, a write-to-operator (WTO) command is issued to the console indicating the user ID of the user who is cancelled, and the user ID and terminal name of the person who issued the CANCEL, TERMNAT or FORCE command.

Using the commands TERMNAT and CANCEL, a running session may be marked to terminate normally or abnormally. This will be honored the next time Natural Monitor gets control within the desired session.

The CANCEL, FORCE and TERMNAT commands may be used from within the individual user summary window as well; however, here there is no need to include the U=user-ID, SID, or T=terminalname parameters on either of these commands, since the CANCEL, FORCE or TERMNAT command is issued against the user whose session was displayed in this window.

Lowest 20 Window

The Lowest 20 window displays one of the following:

  • the first 20 users sorted alphabetically from A; or

  • the 20 users who are using the least amount of a particular system resource along with the individual usage statistics for that resource for each of the 20 users.

The order of users is by intensity of use. User 01 on the Lowest 20 window represents the least intensive user of the resource.

../graphics/bluearro.pngTo access the Lowest 20 window

Perform one of the following procedures from the Summary of Active Users display:

  • position the cursor at any row under the column header that represents the particular resource being monitored and press PF6 (Low); or

  • type the command LOW on the command line. Position the cursor at any row under the column header that represents the particular resource being monitored and press ENTER.

A window appears similar to the Lowest 20 window shown below:

  16:53:30                 ***** REVIEW NM UTILITY *****               2006-03-02
                            - Summary of Active Users -
  
   +--------------------------------------------------------------------------+
   !                            - The Lowest 20 -                             !
   !                                                                          !
   !     Userid    SID  Response Time          Userid    SID  Response Time   !
   ! 01. REC         13        0.126       11.                                !
   ! 02. REC         16        0.211       12.                                !
   ! 03. GGS         12        0.235       13.                                !
   ! 04. KKR         20        0.340       14.                                !
   ! 05. REVHIST      1        1.999       15.                                !
   ! 06. GGS         19        2.267       16.                                !
   ! 07.                                   17.                                !
   ! 08.                                   18.                                !
   ! 09.                                   19.                                !
   ! 10.                                   20.                                !
   !                                                                          !
   !                                                                          !
   ! Command ===>                                                             !
   ! Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10---PF12- !
   !       Help        Exit                                Pick         Menu  !
   +--------------------------------------------------------------------------+ -
        Help  STerm Exit  SUser SSid  Low   High   +    Pick  <===        Menu

Anmerkung:
Use of the PICK command/PF9 to access the summary screen for a single user on the Lowest 20 screen is discussed under the heading Summary of Active User Window below.

Highest 20 Window

The Highest 20 window displays one of the following:

  • the last 20 users sorted alphabetically from Z: or

  • the 20 users who are using the greatest amount of a particular system resource along with the individual usage statistics for that resource for each of the 20 users.

The order of users is by intensity of use. User 01 on the Highest 20 window represents the most intensive user of the resource.

../graphics/bluearro.pngTo access the Highest 20 window

Perform one of the following procedures from the Summary of Active Users display:

  • position the cursor at any row under the column header that represents the particular resource being monitored and press PF7 (High); or

  • type the command HIGH on the command line. Position the cursor at any row under the column header that represents the particular resource being monitored and press ENTER.

A window appears similar to the Highest 20 window shown below:

  16:54:14                 ***** REVIEW NM UTILITY *****               2006-03-02
                            - Summary of Active Users -
  
   +--------------------------------------------------------------------------+
   !                            - The Highest 20 -                            !
   !                                                                          !
   !     Userid    SID  Response Time          Userid    SID  Response Time   !
   ! 01. GGS         19        2.267       11.                                !
   ! 02. REVHIST      1        1.999       12.                                !
   ! 03. KKR         20        0.340       13.                                !
   ! 04. GGS         12        0.234       14.                                !
   ! 05. REC         16        0.211       15.                                !
   ! 06. REC         13        0.126       16.                                !
   ! 07.                                   17.                                !
   ! 08.                                   18.                                !
   ! 09.                                   19.                                !
   ! 10.                                   20.                                !
   !                                                                          !
   !                                                                          !
   ! Command ===>                                                             !
   ! Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10---PF12- !
   !       Help        Exit                                Pick         Menu  !
   +--------------------------------------------------------------------------+ -
        Help  STerm Exit  SUser SSid  Low   High   +    Pick  <===        Menu

Use of the PICK command/PF9 to access the summary screen for a single user on the Highest 20 screen is discussed under the heading Summary of Active User Window below.

Summary of Active User Window

The summary screen for a single user can be accessed from any of the Summary of Active Users display screens by using the Pick function.

../graphics/bluearro.pngTo access the Summary of Active Users display screens

Use either the PF9 key or the PICK command:

  • To use the PF9 key, position the cursor on the row that corresponds to the user ID for which you want an individual summary display and press the PF9 key.

  • To use one of the PICK commands (PICK U=userid, PICK sid, or PICK T=terminalname), type the command on the command line and press ENTER.

This command may be entered from any Natural Monitor screen by preceding it with the code NM SA. If you are already in Natural Monitor but are outside the Summary of Active Users function, type in the command preceded by the value SA.

An individual summary window appears similar to the one shown below:

16:54:47                 ***** REVIEW NM UTILITY *****               2006-03-02
                            - Summary of Active Users -
  +-----------------------------------------------------------------------------+
  !                          - Summary of User GGS -                            !
  !                                                                             !
  ! Current Status  Inactive                                                    !
  !                                                                             !
  ! NAT Userid .... GGS        Trans Name .. NC22      Logon Date .. 2006-03-02 !
  ! NAT Appl ...... GGS        Term Name ... 0773      Logon Time .. 16:45:03   !
  ! NAT Prog ...... AHELLO     Session ID .. 19        Trans Date .. 2006-03-02 !
  ! NAT Stmt ...... 0000       Trans Nr .... 1926      Trans Time .. 16:45:05   !
  ! NAT Version ... 2.2        Thread Nr ... 3         Num Trans ... 1          !
  ! NAT Pg Level .. 0          Resp Time ... 2.267     Term Data ... 0          !
  !                                                                             !
  !                              Database Statistics                            !
  ! Last Cmd ...... RC                                 Calls/Tran .. 113.00     !
  ! Last DBID ..... 10         Curr Calls .. 0         ETime/Call .. 0.014      !
  ! Last FNR ...... 0          Tot Calls ... 113       CmdT/Call ... 0.00100    !
  ! Last/Cur Dur .. 0.00656                                                     !
  !                                                                             !
  ! Command ===>                                                                !
  ! Enter-PF1---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12----  !
  !       Help  Exit                          Next  Nct               Menu      !
  +-----------------------------------------------------------------------------+

The Summary of Active User window presents the same information provided on the Summary of Active Users display, but in a different format. Refer to Statistical Fields on the Summary of Active Users Display for an explanation of the relevant fields.

The following commands and PF keys are available from this screen:

PF Key Command Description
  CANCEL Terminate the specified session abnormally.
  FORCE Deactivate monitoring for the specified session.
  TERMNAT Terminate the specified session normally.
PF1 HELP Invoke online help.
PF3 EXIT Exit this function.
PF8 NEXT Display the next user from a list of users on the Summary of Active Users screen.
PF9 NCT Display the Natural call table which contains the programs accessed by the user's last or current transaction.
PF12 MENU Return to the Natural Monitor Main Menu.

Anmerkung:
No PF keys are available for the CANCEL, FORCE and TERMNAT commands.

Accessing the Natural Call Table Window

The Natural Call Table (NCT) contains a list of the Natural programs accessed by the user's last or current transaction and statistics about the database calls issued from these programs.

The NCT is accessible from the individual summary window.

Beginn der AnweisungslisteTo access the Natural Call Table window

  1. Type in the command NCT and press ENTER, or

  2. Press the PF9 key.

The NCT display spans two windows; the PF keys PF11 and PF10 can be used to toggle between the two.

An example of these windows is shown below. Columns contain asterisks (*) only if no database information is available because the program issued no database calls. This is the first window:

16:54:47                 ***** REVIEW NM UTILITY *****               2006-03-02
            +----------------------------------------------------------+
  +-------- !                 - NATURAL Call Table -                   ! -------+
  !         ! NATURAL  NATURAL  NAT  Num     DB      Total      Total  !        !
  !         ! Appl     Prog     Lvl Execs Calls  Elps Time   Cmd Time  !        !
  ! Current ! SYSTEM              0    1     11      0.300    0.01745  !        !
  !         ! SYSTEM   LOGON      1    1  ***** ********** **********  !        !
  ! NAT Use ! SYSTEM   LOGONUS    1    1      7      0.010    0.00865  ! /08/08 !
  ! NAT App ! SYSTEM   NAT00008   2    1  ***** ********** **********  ! 5:03   !
  ! NAT Pro ! SYSTEM   SECUF      2    3      7      0.359    0.01547  ! /08/08 !
  ! NAT Stm ! SYSTEM   NAT00038   3   10  ***** ********** **********  ! 5:05   !
  ! NAT Ver ! SYSTEM   SECUE      2    1  ***** ********** **********  !        !
  ! NAT Pg  ! SYSTEM   NAT00041   3    2  ***** ********** **********  !        !
  !         ! SYSTEM   LOGONEX1   2    1  ***** ********** **********  !        !
  !         ! SYSTEM   LOGONM1    3    1  ***** ********** **********  !        !
  ! Last Cm ! SYSTEM   SECPGM     2    1      1      0.001    0.00054  ! 00     !
  ! Last DB ! SYSTEM   NAT00062   3    4     69      0.643    0.04556  ! 4      !
  ! Last FN ! SYSTEM   SECUC      2    1      3      0.282    0.00777  ! 100    !
  ! Last/Cu ! SYSTEM   SECUH      2    1      2      0.006    0.00633  !        !
  !         !                                                          !        !
  ! Command ! Command ===>                                             !        !
  ! Enter-P ! Enter-PF1---PF3---PF7---PF8---PF9---PF10--PF11--PF12---  ! 2----  !
  !       H !       Help  Exit   -     +    Refr        ===>  Menu     ! u      !
  +-------- +----------------------------------------------------------+ -------+

This is the second window:

16:54:47                 ***** REVIEW NM UTILITY *****               2006-03-02
            +----------------------------------------------------------+
  +-------- !                 - NATURAL Call Table -                   ! -------+
  !         ! NATURAL    NAT               Rsp        High       High  !        !
  !         ! Prog      Stmt Cmd DBID  FNR Code  Elps Time   Cmd Time  !        !
  ! Current !           0000 S1    10   50   0       0.147    0.01041  !        !
  !         ! ********  **** ** ***** **** ***  ********** **********  !        !
  ! NAT Use ! LOGONUS   6228 CL    10    0   0       0.006    0.00628  ! /08/08 !
  ! NAT App ! ********  **** ** ***** **** ***  ********** **********  ! 5:03   !
  ! NAT Pro ! SECUF     4220 L3    10   33   0       0.015    0.00584  ! /08/08 !
  ! NAT Stm ! ********  **** ** ***** **** ***  ********** **********  ! 5:05   !
  ! NAT Ver ! ********  **** ** ***** **** ***  ********** **********  !        !
  ! NAT Pg  ! ********  **** ** ***** **** ***  ********** **********  !        !
  !         ! ********  **** ** ***** **** ***  ********** **********  !        !
  !         ! ********  **** ** ***** **** ***  ********** **********  !        !
  ! Last Cm ! SECPGM    4980 OP    10   45   0       0.001    0.00054  ! 00     !
  ! Last DB ! NAT00062  2630 L3    10   45   0       0.093    0.00758  ! 4      !
  ! Last FN ! SECUC     6820 N1    10   33   0       0.220    0.00577  ! 100    !
  ! Last/Cu ! SECUH     3670 CL    10    0   0       0.005    0.00593  !        !
  !         !                                                          !        !
  ! Command ! Command ===>                                             !        !
  ! Enter-P ! Enter-PF1---PF3---PF7---PF8---PF9---PF10--PF11--PF12---  ! 2----  !
  !       H !       Help  Exit   -     +    Refr  <===        Menu     ! u      !
  +-------- +----------------------------------------------------------+ -------+

The following fields are shown on these screens:

Field Description
Natural Appl The Natural application of the program.
Natural Prog The name of the Natural program.
NAT Lvl The call level of the Natural program.
Num Execs The number of times the Natural program was called during the last transaction.
DB Calls The total number of database calls issued by the program during the last transaction.
Total Elps Time The total amount of elapsed time (seconds) to process all of the database calls issued by the program during the last transaction.
Total Cmd Time The total amount of time (seconds) required by the database to process all DB calls of the program during the last transaction.
NAT Stmt The statement line number in the Natural program that generated the database call with the highest database command time.
Cmd The database command issued by the program that resulted in the highest database command time.
DBID The database ID accessed by the database call that resulted in the highest database command time during the program..
FNR The database FNR accessed by the database call that resulted in the highest database command time during the program.
Rsp Code The database response code of the database call that resulted in the highest database command time during the program.
High Elps Time The database elapsed time (seconds) of the database call that resulted in the highest database command time during the program.
High Cmd Time The highest database command time (seconds) for a database call during the execution of the Natural program.

The following commands and PF keys are available from these windows:

PF Key Command Description
PF1 HELP Invoke online help.
PF3 EXIT Exit this function.
PF7 - Scroll backward one display.
PF8 + Scroll forward one display.
PF9 REFRESH Refresh the Natural Call Table display with updated information.
PF10 LEFT Scroll left one screen.
PF11 RIGHT Scroll right one screen.
PF12 MENU Return to the Natural Monitor Main Menu.