This document describes the steps for installing Natural Review (product code RNM) on z/VSE.
For information on the features and functions provided by Natural Review, see the Natural Review documentation.
When used in this document, the notation
vrs or
vr represents the relevant product
version (see also Version in the
Glossary).
See General Prerequisites and System Support in the section Overview of the Installation Process.
The Natural Review monitoring system requires CICS shared storage for
collecting its monitoring data. For each Natural session, a user account area
of 656 bytes is allocated plus space for a Natural call table (NCT). This table
is used to track the Natural programs and database calls issued within a
transaction. The number of NCT entries is determined by the
NCTSIZE
parameter in the source member RNMSCB3.A (see
Step 7: Build the
Natural Review System Control Block). Each table entry is
48 bytes long and the table contains 32 entries (default). This yields a total
amount of 656+32*48=2192 bytes per running session. The storage is reused when
the session terminates.
Each active response time report requires a basic control block that is
400 bytes long. Each detail record is 128 bytes long. The maximum number of
detail records per report is controlled by the Number of Records
in the report definition. If the Transaction Summary option is set
in the report definition, a 64 bytes transaction summary area is allocated for
each transaction ID.
After a report has been written to the Natural Review repository file by the history session, all report-depending storage is released.
The installation medium contains the following data sets required for product installation:
| Data Set Name | Contents |
|---|---|
RNMvrs.SYSF |
ADALOD loadable RNM system file |
RNMvrs.LIBR |
Source modules, macros, phases and object modules |
RNMvrs.INPL |
Natural objects |
In the RNMvrs.LIBR, the following sublibrary object types are used:
.A |
Assembler source code, examples, and so on |
.J |
Installation jobs |
.OBJ |
Object modules |
Copy the data sets into your environment as described in Copying Data Sets to a z/VSE Disk in the section Installing Natural.
Sample installation jobs are contained in the NATvrs.LIBJ data set
and are prefixed with the product code. The data set is provided on the
installation medium supplied for base Natural.
Be sure to read Installation Process and Major Natural Features before you start the installation procedure.
(Job I005, Step 2211)
Define the following CICS table entries with RDO. You may have to include additional parameters according to your requirements. Natural Review supports transaction isolation (that is, it can run in user key).
Define the Natural Review history session start/stop transaction:
CEDA DEFINE TRANSACTION(RVH1) PROGRAM(RNMHIST3)
GROUP(RNMvr)
Define the Natural Review asynchronous Natural history session transaction:
CEDA COPY TRANSACTION(xxxx) GROUP(yyyy) AS(RVH2)
TO(RNMvr)
This copies your existing Natural transaction ID
xxxx from your Natural definition group
yyyy as an alias transaction for
Natural Review. This definition is optional and you may use the online Natural
transaction code xxxx as well, but it
helps the administrator identify the Natural Review asynchronous history
session.
The transaction codes RVH1 and RVH2 can be
chosen freely (that is, you may change them if required). The Natural session
transaction code must be the same as defined with the parameter
NATTRAN (in this example, NATTRAN=RVH2).
See Step 7: Build the
Natural Review System Control Block and
Installation Verification (Step 3).
Define the Natural Review history session start/stop program:
CEDA DEFINE PROGRAM(RNMHIST3) LANGUAGE(ASSEMBLER)
GROUP(RNMvr)
Define the Natural Review system control block:
CEDA DEFINE PROGRAM(RNMSCB3) LANGUAGE(ASSEMBLER)
RESIDENT(YES) GROUP(RNMvr)
After entering the online definitions, activate them by using
CEDA INSTALL GROUP(RNMvr). The new
GROUP should be added to the GRPLIST defined for CICS
cold start.
This table entry is optional. You can use it for automatic start and termination of the Natural Review history session during CICS startup and shutdown.
Define the Natural Review history session start/stop program:
DFHPLT TYPE=ENTRY,PROGRAM=RNMHIST3
Insert the table entry in your assembled PLTPI and/or PLTSD CICS table. This avoids manual starting and stopping of the Natural Review history session (see Step 7: Build the Natural Review System Control Block).
(Job I050, Step 2620)
You can skip this step if you have already installed a Natural Review repository file and want to continue using it. The format of the repository file is compatible with previous versions.
The repository file is an Adabas file used for storing response time reports and history data. It is possible to share the repository file across several CICS regions. Any Adabas file can be used to contain the Natural Review repository file. The corresponding file number must be defined to Natural as a logical system file (see Step 3: Build the Natural Parameter Module). The repository file has to be initialized via Natural (see Step 10: Initialize the Natural Review Repository File).
Modify the job as follows before submitting it:
Change the data set definitions according to your requirements.
Change DB=dbid in the
Adabas ADARUN statements to the correct database ID.
Change SVC=nnn to the
correct Adabas SVC number.
Change the Adabas ADALOD statement to the file number
fnr of the Adabas file that will
contain the Natural Review repository file, and the Natural Review version
vrs you are running:
ADALOD LOAD FILE=fnr,NAME='REPOS-RNMvrs'
(Job I060, Steps 0010, 0015)
Modify the settings of the parameters supplied with the Natural parameter module as follows:
RDCSIZE=2 MADIO=5000 MAXCL=0 RCA=NATGWREV NTLFILE 180,dbid,fnr
where:
RDCSIZE is the
Natural profile parameter that determines whether a session is monitored by
Natural Review. If you set RDCSIZE=0 (this is the default) for a
session, it is not monitored by Natural Review.
RCA is the Natural
profile parameter required if you want to link the Natural Review monitor
interface module separate from the nucleus (see
Step 7: Build the
Natural Review System Control Block) by means of the RCA
technique.
NTLFILE
(or dynamic LFILE
parameter) is the macro that determines the Natural Review repository file used
by the SYSRNM application for retrieving and maintaining report
definitions and storing history report data for the history session. The
currently accessed repository file can be changed using the
LFILE command within Natural Review (see the
Natural
Review documentation).
dbid is the database ID and
fnr the file number specified in
Step 2: Load the Natural Review
Repository File.
For details about the parameters mentioned above, see the Parameter Reference documentation.
Assemble and link the Natural parameter module.
(Job I060, Step 0020)
Link the nucleus for Natural Review by including the following module from the Natural Review library:
INCLUDE RNMNUC3
Natural Review uses the Natural Data Collector exit interface to get
data from Natural. For more information on the SYSRDC Data
Collector, see the Natural SYSRDC utility described in the
Utilities documentation.
The Natural Review module RNMNUC3 supports all different
ways of statically linked Natural subprograms. For more information about
linking the nucleus, see Linking Natural Objects to the Natural
Nucleus in the Natural Operations
documentation.
If you run an environment-independent nucleus
for multiple environments (for example, CICS and batch), link
RNMNUC3 to the environment-dependent nucleus, because Natural
Review monitoring runs under CICS only. This prevents unnecessary overload in
your non-CICS systems.
If RNMNUC3 is not linked to the
environment-dependent
nucleus, the following CICS assembler command level stub from the
CICS library must be linked to
RNMNUC3:
INCLUDE DFHEAI
Instead of linking RNMNUC3 to the nucleus, you can link
it as a separate module defined with the Natural profile parameter
RCA
(described in the Parameter Reference documentation). The
following linkage editor statements are then required:
PHASE NATGWREV,* MODE RMODE(ANY) INCLUDE DFHEAI INCLUDE RNMNUC3 ENTRY NATGWREV
The MODE statement is optional. A CICS PPT entry is
required for the module NATGWREV. It must be specified with the
profile parameter RCA (see
Step 3: Build the
Natural Parameter Module). The module can be shared
between multiple Natural nuclei.
(Job I061, Step 2661)
If you want to continue using a profile text object
DEFAULT you modified according to your requirements, rename your
DEFAULT object in the SYSRNM library before you start
loading the new Natural objects.
Load the Natural objects specific to Natural Review from the
RNMvrs.INPL data set into your
FNAT system file by using the Natural
INPL utility.
It is sufficient to load the Natural objects only into one
FNAT system file even if you want to monitor other
FNAT system files as well.
The Natural Review User Profile Subsystem is initialized when the
profile text object DEFAULT is copied to the SYSRNM
library.
If you renamed the profile text object DEFAULT in the
first step, replace the newly loaded DEFAULT by this object.
This step only applies if Natural Security is installed.
Define the Natural Review library SYSRNM in Natural
Security.
You can define a startup menu for the SYSRNM library. If
the library is People-protected, each user of this library must be
linked to it.
Define REVHIST as a user of type PERSON
with a default application of SYSRNM. REVHIST is used
as the user ID by the Natural Review history session.
(Job I070, Steps 2622, 2623)
The Natural Review System Control Block RNMSCB3 is defined
as a program in CICS. RNMSCB3 is not an executable program. Its
storage is used by Natural Review as the common anchor and control point for
all monitored Natural sessions and reports within one CICS address space. There
are some installation-specific generation parameters you can specify in object
RNMSCB3 in the Natural Review source library.
Set the following parameters in RNMSCB3 according to
your requirements:
| Parameter | Explanation | ||||||
|---|---|---|---|---|---|---|---|
NATTRAN= |
This is the Natural/CICS transaction code for the Natural Review history session. You must specify this parameter to set the correct Natural transaction code (see Step 1: Add CICS Control Table Entries for Natural Review). | ||||||
NPARMS= |
Additional dynamic Natural parameters for the Natural Review history session. This parameter is optional. | ||||||
CLOSE= |
|
||||||
DATE= |
|
||||||
EMPTY= |
|
||||||
NCTSIZE= |
This parameter determines the number of entries in the
Natural Call Table (NCT) of Natural Review. The NCT is allocated in CICS shared
storage and is used to track the usage of the Natural programs per session.
Possible values: The default setting is |
||||||
Modify and run the job RNMI070 to generate the Natural
Review System Control Block. The module must be linked with the
NORENT option. The target link library can be any library defined
to CICS.
(Job I070, Step 2625)
Natural Review history data is written to the Natural Review repository file by an asynchronous (that is, not terminal-bound) Natural session.
Modify and run job RNMLINK in the Natural Review source
library.
It links the CICS-dependant history session startup module
RNMHIST3. The target link library can be any library defined to
CICS.
There can be only one history session within one CICS address space.
The Natural objects specific to Natural Review (see
Step 5: Load New Natural
Objects) must be loaded to the FNAT system
file running with the history session.
Use the following CEMT transaction to activate the
nucleus module to which RNMNUC3 and the modified the Natural
parameter module are linked:
CEMT SET PROGRAM(. . . .) NEWCOPY
Restart CICS if you cannot activate the nucleus module.
Skip this step if your Natural Review repository file is already initialized.
Initialize the repository file after loading it in Step 2: Load the Natural Review Repository File:
Logon to the SYSRNM library and enter the following at
the NEXT prompt:
INSTALL NM
The following messages will then appear:
Now creating sample report system response time Now creating sample report highest response Natural Review repository initialization complete. Press <ENTER> to continue
During the initialization process, two default (sample)
response time reports are added as shown above.
You can verify the successful installation of Natural Review by performing the following steps:
At any Natural command prompt, enter the following:
SYSRNM
Natural Review is started and a Natural Review logo screen similar to the example below appears:
17:30:01 ***** REVIEW NM UTILITY ***** date
RRRRRRRR EEEEEEE VVV VVV III EEEEEEE WWW WWW
RRRRRRRRR EEEEEEE VVV VVV III EEEEEEE WWW WWW
RRR RRR EEE VVV VVV III EEE WWW WWW
RRR RRR EEE VVV VVV III EEE WWW WWW
RRRRRRRR EEEEEE VVV VVV III EEEEEE WWW W WWW
RRRRRRRR EEEEEE VVV VVV III EEEEEE WWW WW WWW
RRR RRR EEE VVV VVV III EEE WWW WWWW WWW
RRR RRR EEE VVV VVV III EEE WWW WWWWWW WWW
RRR RRR EEEEEEE VVVVVV III EEEEEEE WWWWW WWWWW
RRR RRR EEEEEEE VVVV III EEEEEEE WWW WWW
N A T U R A L M O N I T O R
A P R O D U C T O F S O F T W A R E A G |
(You can suppress this screen by specifying BANNER=N in
the text object CONFIG in the library SYSRNM.)
Press ENTER to invoke the Natural Review Main Menu screen:
17:30:17 ***** REVIEW NM UTILITY ***** date
- Main Menu -
Code Function
NM Natural Monitor System
UP User Profile System
Command ===>
REV00001 - Welcome to Review NM running under CICS
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
Help Exit Fin |
Alternatively, you can invoke this menu by logging on to the Natural
library SYSRNM and then entering the following command:
MENU
In the command line of the Natural Review Main Menu screen, enter either of the following commands:
NM
(for )
or
UP
(for )
Depending on the command entered, the main screen of the requested subsystem appears. You can then check your installation parameters and the status of the history session. For detailed information on the functions provided by the subsystems, see the Natural Review documentation.
If you want to run history reports, start the history session. It runs as an asynchronous (non-terminal) Natural session and writes the collected report data to the repository file each time a report time interval has expired.
You can start and stop the history session either automatically by
using the CICS PLTPI/PLTSD (see Step 1: Add CICS Control Table Entries for
Natural Review), or manually outside Natural by using the
RVH1 transaction (see Step 1: Add CICS Control Table Entries for
Natural Review) in the following ways:
RVH1 |
Start the Natural Review history session with the transaction
code RVH2 as defined with NATTRAN in
Step 8: Build the
Natural Review System Control Block.
The history session can also be started with the
|
RVH1 STOP |
Terminate the Natural Review history session.
The history session can also be terminated with the
|
RVH1 TEST |
Start the Natural Review history session on the current
terminal.
This option can be used for debugging purposes, for example, to debug the history session with CEDF (the CICS debugging facility). Note that no Natural terminal I/Os are supported during the normal processing of the history session. Therefore, you have to terminate the history session from another terminal. |
Check the Natural Review initialization messages on the console log of
your CICS system to find out whether the history session has started
successfully. The following message should appear: REV20200 - REVIEW
NM HISTORY SESSION STARTED.
For more detailed explanations of the messages in Natural Review,
enter MSG followed by the message number (for example, MSG
1) in the command line of Natural Review.